printer.cfg: refactor

Clean up some comments and reorder file

Signed-off-by: Thomas Schmid <tom@lfence.de>

printer.cfg

@@ -267,22 +267,10 @@ heater_pin: PA2
 ##  See https://www.klipper3d.org/Config_Reference.html#common-thermistors for additional options
 sensor_type: MAX31865
 sensor_pin: PF8
-#   The chip select line for the sensor chip. This parameter must be
-#   provided.
 spi_speed: 2000000
-#   The SPI speed (in hz) to use when communicating with the chip.
-#   The default is 4000000.
 spi_software_sclk_pin: EXP2_2
 spi_software_mosi_pin: EXP2_6
 spi_software_miso_pin: EXP2_1
-#   See the "common SPI settings" section for a description of the
-#   above parameters.
-#tc_type: K
-#tc_use_50Hz_filter: False
-#tc_averaging_count: 1
-#   The above parameters control the sensor parameters of MAX31856
-#   chips. The defaults for each parameter are next to the parameter
-#   name in the above list.
 rtd_nominal_r: 100
 rtd_reference_r: 430
 rtd_num_of_wires: 4
@@ -326,7 +314,6 @@ sensor_type: Generic 3950
 sensor_pin: PF3
 ##  Adjust Max Power so your heater doesn't warp your bed. Rule of thumb is 0.4 watts / cm^2 .
 max_power: 0.6
-# tba: test --> 0
 min_temp: 0
 max_temp: 120
 #control: pid
@@ -421,58 +408,19 @@ fan_speed: 1.0
 timeout: 1800
 
 [safe_z_home]
-##  XY Location of the Z Endstop Switch
-##  Update -10,-10 to the XY coordinates of your endstop pin 
-##  (such as 157,305) after going through Z Endstop Pin
-##  Location Definition step.
 home_xy_position: 232.45, 358
 speed:100
 z_hop:10
 
 [quad_gantry_level]
-##  Use QUAD_GANTRY_LEVEL to level a gantry.
-##  Min & Max gantry corners - measure from nozzle at MIN (0,0) and 
-##  MAX (250, 250), (300,300), or (350,350) depending on your printer size
-##  to respective belt positions
-
-#--------------------------------------------------------------------
-##  Gantry Corners for 250mm Build
-##  Uncomment for 250mm build
-#gantry_corners:
-#   -60,-10
-#   310, 320
-##  Probe points
-#points:
-#   50,25
-#   50,175
-#   200,175
-#   200,25
-    
-##  Gantry Corners for 300mm Build
-##  Uncomment for 300mm build
-#gantry_corners:
-#   -60,-10
-#   360,370
-##  Probe points
-#points:
-#   50,25
-#   50,225
-#   250,225
-#   250,25
-
-##  Gantry Corners for 350mm Build
-##  Uncomment for 350mm build
 gantry_corners:
    -60,-10
    410,420
-#  Probe points
 points:
    50,25
    50,275
    300,275
    300,25
-
-#--------------------------------------------------------------------
 speed: 350
 horizontal_move_z: 5
 retries: 5
@@ -513,28 +461,12 @@ path: ~/.octoprint/uploads/
 type: vsdlist
 enable: {('virtual_sdcard' in printer)}
 name: Print Files
+
+
 #####################################################################
 #   Displays
 #####################################################################
 
-##  Uncomment the display that you have
-#--------------------------------------------------------------------
-
-#[display]
-##  RepRapDiscount 128x64 Full Graphic Smart Controller
-#lcd_type: st7920
-#cs_pin: EXP1_4
-#sclk_pin: EXP1_5
-#sid_pin: EXP1_3
-#menu_timeout: 40
-#encoder_pins: ^EXP2_5, ^EXP2_3
-#click_pin: ^!EXP1_2
-
-[output_pin beeper]
-pin: EXP1_1
-
-#--------------------------------------------------------------------
-
 [display]
 #  mini12864 LCD Display
 lcd_type: uc1701
@@ -566,6 +498,8 @@ gcode:
         SET_LED LED=btt_mini12864 RED=1 GREEN=1 BLUE=1 INDEX=2 TRANSMIT=0
         SET_LED LED=btt_mini12864 RED=0 GREEN=0.2 BLUE=1 INDEX=3 
 
+[output_pin beeper]
+pin: EXP1_1
 
 #####################################################################
 #  Menu