printer.cfg: refactor

Clean up some comments and reorder file

Signed-off-by: Thomas Schmid <tom@lfence.de>
This commit is contained in:
Thomas 2022-01-06 12:57:08 +01:00
parent e5efbd07a5
commit 3e184f03ad

View File

@ -267,22 +267,10 @@ heater_pin: PA2
## See https://www.klipper3d.org/Config_Reference.html#common-thermistors for additional options ## See https://www.klipper3d.org/Config_Reference.html#common-thermistors for additional options
sensor_type: MAX31865 sensor_type: MAX31865
sensor_pin: PF8 sensor_pin: PF8
# The chip select line for the sensor chip. This parameter must be
# provided.
spi_speed: 2000000 spi_speed: 2000000
# The SPI speed (in hz) to use when communicating with the chip.
# The default is 4000000.
spi_software_sclk_pin: EXP2_2 spi_software_sclk_pin: EXP2_2
spi_software_mosi_pin: EXP2_6 spi_software_mosi_pin: EXP2_6
spi_software_miso_pin: EXP2_1 spi_software_miso_pin: EXP2_1
# See the "common SPI settings" section for a description of the
# above parameters.
#tc_type: K
#tc_use_50Hz_filter: False
#tc_averaging_count: 1
# The above parameters control the sensor parameters of MAX31856
# chips. The defaults for each parameter are next to the parameter
# name in the above list.
rtd_nominal_r: 100 rtd_nominal_r: 100
rtd_reference_r: 430 rtd_reference_r: 430
rtd_num_of_wires: 4 rtd_num_of_wires: 4
@ -326,7 +314,6 @@ sensor_type: Generic 3950
sensor_pin: PF3 sensor_pin: PF3
## Adjust Max Power so your heater doesn't warp your bed. Rule of thumb is 0.4 watts / cm^2 . ## Adjust Max Power so your heater doesn't warp your bed. Rule of thumb is 0.4 watts / cm^2 .
max_power: 0.6 max_power: 0.6
# tba: test --> 0
min_temp: 0 min_temp: 0
max_temp: 120 max_temp: 120
#control: pid #control: pid
@ -421,58 +408,19 @@ fan_speed: 1.0
timeout: 1800 timeout: 1800
[safe_z_home] [safe_z_home]
## XY Location of the Z Endstop Switch
## Update -10,-10 to the XY coordinates of your endstop pin
## (such as 157,305) after going through Z Endstop Pin
## Location Definition step.
home_xy_position: 232.45, 358 home_xy_position: 232.45, 358
speed:100 speed:100
z_hop:10 z_hop:10
[quad_gantry_level] [quad_gantry_level]
## Use QUAD_GANTRY_LEVEL to level a gantry.
## Min & Max gantry corners - measure from nozzle at MIN (0,0) and
## MAX (250, 250), (300,300), or (350,350) depending on your printer size
## to respective belt positions
#--------------------------------------------------------------------
## Gantry Corners for 250mm Build
## Uncomment for 250mm build
#gantry_corners:
# -60,-10
# 310, 320
## Probe points
#points:
# 50,25
# 50,175
# 200,175
# 200,25
## Gantry Corners for 300mm Build
## Uncomment for 300mm build
#gantry_corners:
# -60,-10
# 360,370
## Probe points
#points:
# 50,25
# 50,225
# 250,225
# 250,25
## Gantry Corners for 350mm Build
## Uncomment for 350mm build
gantry_corners: gantry_corners:
-60,-10 -60,-10
410,420 410,420
# Probe points
points: points:
50,25 50,25
50,275 50,275
300,275 300,275
300,25 300,25
#--------------------------------------------------------------------
speed: 350 speed: 350
horizontal_move_z: 5 horizontal_move_z: 5
retries: 5 retries: 5
@ -513,28 +461,12 @@ path: ~/.octoprint/uploads/
type: vsdlist type: vsdlist
enable: {('virtual_sdcard' in printer)} enable: {('virtual_sdcard' in printer)}
name: Print Files name: Print Files
##################################################################### #####################################################################
# Displays # Displays
##################################################################### #####################################################################
## Uncomment the display that you have
#--------------------------------------------------------------------
#[display]
## RepRapDiscount 128x64 Full Graphic Smart Controller
#lcd_type: st7920
#cs_pin: EXP1_4
#sclk_pin: EXP1_5
#sid_pin: EXP1_3
#menu_timeout: 40
#encoder_pins: ^EXP2_5, ^EXP2_3
#click_pin: ^!EXP1_2
[output_pin beeper]
pin: EXP1_1
#--------------------------------------------------------------------
[display] [display]
# mini12864 LCD Display # mini12864 LCD Display
lcd_type: uc1701 lcd_type: uc1701
@ -566,6 +498,8 @@ gcode:
SET_LED LED=btt_mini12864 RED=1 GREEN=1 BLUE=1 INDEX=2 TRANSMIT=0 SET_LED LED=btt_mini12864 RED=1 GREEN=1 BLUE=1 INDEX=2 TRANSMIT=0
SET_LED LED=btt_mini12864 RED=0 GREEN=0.2 BLUE=1 INDEX=3 SET_LED LED=btt_mini12864 RED=0 GREEN=0.2 BLUE=1 INDEX=3
[output_pin beeper]
pin: EXP1_1
##################################################################### #####################################################################
# Menu # Menu