Update to current running config
Signed-off-by: Thomas Schmid <tom@binary-kitchen.de>
This commit is contained in:
parent
3e184f03ad
commit
7b2ce94b70
450
display.cfg
Normal file
450
display.cfg
Normal file
@ -0,0 +1,450 @@
|
|||||||
|
# This file defines the default layout of the printer's lcd display.
|
||||||
|
|
||||||
|
# It is not necessary to edit this file to change the display.
|
||||||
|
# Instead, one may override any of the sections defined here by
|
||||||
|
# defining a section with the same name in the main printer.cfg config
|
||||||
|
# file.
|
||||||
|
|
||||||
|
|
||||||
|
######################################################################
|
||||||
|
# Helper macros for showing common screen values
|
||||||
|
######################################################################
|
||||||
|
|
||||||
|
[display_template _heater_temperature]
|
||||||
|
param_heater_name: "extruder"
|
||||||
|
text:
|
||||||
|
{% if param_heater_name in printer %}
|
||||||
|
{% set heater = printer[param_heater_name] %}
|
||||||
|
# Show glyph
|
||||||
|
{% if param_heater_name == "heater_bed" %}
|
||||||
|
{% if heater.target %}
|
||||||
|
{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
|
||||||
|
~bed_heat{frame}~
|
||||||
|
{% else %}
|
||||||
|
~bed~
|
||||||
|
{% endif %}
|
||||||
|
{% else %}
|
||||||
|
~extruder~
|
||||||
|
{% endif %}
|
||||||
|
# Show temperature
|
||||||
|
{ "%3.0f/%.0f" % (heater.temperature, heater.target) }
|
||||||
|
~degrees~
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
|
[display_template _printing_time]
|
||||||
|
text:
|
||||||
|
{% set ptime = printer.idle_timeout.printing_time %}
|
||||||
|
{% set rtime = printer["gcode_macro M73"].rtime %}
|
||||||
|
{ "P%02d:%02d R%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60, rtime // 60, rtime % 60) }
|
||||||
|
|
||||||
|
[display_template _print_status]
|
||||||
|
text:
|
||||||
|
{% if printer.display_status.message %}
|
||||||
|
{ printer.display_status.message }
|
||||||
|
{% elif printer.idle_timeout.printing_time %}
|
||||||
|
{% set pos = printer.toolhead.position %}
|
||||||
|
{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
|
||||||
|
{% else %}
|
||||||
|
Ready
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
|
|
||||||
|
######################################################################
|
||||||
|
# Default 16x4 display
|
||||||
|
######################################################################
|
||||||
|
|
||||||
|
[display_data _default_16x4 extruder]
|
||||||
|
position: 0, 0
|
||||||
|
text:
|
||||||
|
{% set active_extruder = printer.toolhead.extruder %}
|
||||||
|
{ render("_heater_temperature", param_heater_name=active_extruder) }
|
||||||
|
|
||||||
|
[display_data _default_16x4 fan]
|
||||||
|
position: 0, 10
|
||||||
|
text: { render("_fan_speed") }
|
||||||
|
|
||||||
|
[display_data _default_16x4 heater_bed]
|
||||||
|
position: 1, 0
|
||||||
|
text: { render("_heater_temperature", param_heater_name="heater_bed") }
|
||||||
|
|
||||||
|
[display_data _default_16x4 speed_factor]
|
||||||
|
position: 1, 10
|
||||||
|
text:
|
||||||
|
~feedrate~
|
||||||
|
{ "{:>4.0%}".format(printer.gcode_move.speed_factor) }
|
||||||
|
|
||||||
|
#
|
||||||
|
# Progress bar
|
||||||
|
#
|
||||||
|
[display_data _default_16x4 print_progress]
|
||||||
|
position: 2, 0
|
||||||
|
#text: { "{:^5.0%}".format(printer.display_status.progress) }
|
||||||
|
text: ""
|
||||||
|
|
||||||
|
[display_data _default_16x4 progress_bar]
|
||||||
|
position: 2, 1 # Draw graphical progress bar after text is written
|
||||||
|
#text: { draw_progress_bar(2, 0, 5, printer.display_status.progress) }
|
||||||
|
text: ""
|
||||||
|
|
||||||
|
[display_data _default_16x4 printing_time]
|
||||||
|
position: 2, 1
|
||||||
|
text: { "%s" % (render("_printing_time").strip(),) }
|
||||||
|
|
||||||
|
[display_data _default_16x4 print_status]
|
||||||
|
position: 3, 0
|
||||||
|
text: { render("_print_status") }
|
||||||
|
|
||||||
|
|
||||||
|
######################################################################
|
||||||
|
# Alternative 16x4 layout for multi-extruders
|
||||||
|
######################################################################
|
||||||
|
|
||||||
|
[display_data _multiextruder_16x4 extruder]
|
||||||
|
position: 0, 0
|
||||||
|
text: { render("_heater_temperature", param_heater_name="extruder") }
|
||||||
|
|
||||||
|
[display_data _multiextruder_16x4 fan]
|
||||||
|
position: 0, 10
|
||||||
|
text: { render("_fan_speed") }
|
||||||
|
|
||||||
|
[display_data _multiextruder_16x4 extruder1]
|
||||||
|
position: 1, 0
|
||||||
|
text: { render("_heater_temperature", param_heater_name="extruder1") }
|
||||||
|
|
||||||
|
[display_data _multiextruder_16x4 print_progress]
|
||||||
|
position: 1, 10
|
||||||
|
text: { "{:^6.0%}".format(printer.display_status.progress) }
|
||||||
|
[display_data _multiextruder_16x4 progress_bar]
|
||||||
|
position: 1, 11 # Draw graphical progress bar after text is written
|
||||||
|
text: { draw_progress_bar(1, 10, 6, printer.display_status.progress) }
|
||||||
|
|
||||||
|
[display_data _multiextruder_16x4 heater_bed]
|
||||||
|
position: 2, 0
|
||||||
|
text: { render("_heater_temperature", param_heater_name="heater_bed") }
|
||||||
|
|
||||||
|
[display_data _multiextruder_16x4 printing_time]
|
||||||
|
position: 2, 5
|
||||||
|
text: { "%6s" % (render("_printing_time").strip(),) }
|
||||||
|
|
||||||
|
[display_data _multiextruder_16x4 print_status]
|
||||||
|
position: 3, 0
|
||||||
|
text: { render("_print_status") }
|
||||||
|
|
||||||
|
|
||||||
|
######################################################################
|
||||||
|
# Default 20x4 display
|
||||||
|
######################################################################
|
||||||
|
|
||||||
|
[display_data _default_20x4 extruder]
|
||||||
|
position: 0, 0
|
||||||
|
text: { render("_heater_temperature", param_heater_name="extruder") }
|
||||||
|
|
||||||
|
[display_data _default_20x4 heater_bed]
|
||||||
|
position: 0, 10
|
||||||
|
text: { render("_heater_temperature", param_heater_name="heater_bed") }
|
||||||
|
|
||||||
|
[display_data _default_20x4 extruder1]
|
||||||
|
position: 1, 0
|
||||||
|
text: { render("_heater_temperature", param_heater_name="extruder1") }
|
||||||
|
|
||||||
|
[display_data _default_20x4 fan]
|
||||||
|
position: 1, 10
|
||||||
|
text:
|
||||||
|
{% if 'fan' in printer %}
|
||||||
|
{ "Fan {:^4.0%}".format(printer.fan.speed) }
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
|
[display_data _default_20x4 speed_factor]
|
||||||
|
position: 2, 0
|
||||||
|
text:
|
||||||
|
~feedrate~
|
||||||
|
{ "{:^4.0%}".format(printer.gcode_move.speed_factor) }
|
||||||
|
|
||||||
|
[display_data _default_20x4 print_progress]
|
||||||
|
position: 2, 8
|
||||||
|
text:
|
||||||
|
{% if 'virtual_sdcard' in printer and printer.virtual_sdcard.progress %}
|
||||||
|
~sd~
|
||||||
|
{% else %}
|
||||||
|
~usb~
|
||||||
|
{% endif %}
|
||||||
|
{ "{:^4.0%}".format(printer.display_status.progress) }
|
||||||
|
|
||||||
|
[display_data _default_20x4 printing_time]
|
||||||
|
position: 2, 14
|
||||||
|
text:
|
||||||
|
~clock~
|
||||||
|
{ render("_printing_time") }
|
||||||
|
|
||||||
|
[display_data _default_20x4 print_status]
|
||||||
|
position: 3, 0
|
||||||
|
text: { render("_print_status") }
|
||||||
|
|
||||||
|
|
||||||
|
######################################################################
|
||||||
|
# Default 16x4 glyphs
|
||||||
|
######################################################################
|
||||||
|
|
||||||
|
[display_glyph extruder]
|
||||||
|
data:
|
||||||
|
................
|
||||||
|
................
|
||||||
|
..************..
|
||||||
|
.....******.....
|
||||||
|
..************..
|
||||||
|
.....******.....
|
||||||
|
..************..
|
||||||
|
................
|
||||||
|
....********....
|
||||||
|
....******.*....
|
||||||
|
....********....
|
||||||
|
................
|
||||||
|
......****......
|
||||||
|
.......**.......
|
||||||
|
................
|
||||||
|
................
|
||||||
|
|
||||||
|
[display_glyph bed]
|
||||||
|
data:
|
||||||
|
................
|
||||||
|
................
|
||||||
|
................
|
||||||
|
................
|
||||||
|
................
|
||||||
|
................
|
||||||
|
................
|
||||||
|
................
|
||||||
|
................
|
||||||
|
................
|
||||||
|
................
|
||||||
|
...*********....
|
||||||
|
..*.........*...
|
||||||
|
.*************..
|
||||||
|
................
|
||||||
|
................
|
||||||
|
|
||||||
|
[display_glyph bed_heat1]
|
||||||
|
data:
|
||||||
|
................
|
||||||
|
................
|
||||||
|
..*....*....*...
|
||||||
|
.*....*....*....
|
||||||
|
..*....*....*...
|
||||||
|
...*....*....*..
|
||||||
|
..*....*....*...
|
||||||
|
.*....*....*....
|
||||||
|
..*....*....*...
|
||||||
|
................
|
||||||
|
................
|
||||||
|
...*********....
|
||||||
|
..*.........*...
|
||||||
|
.*************..
|
||||||
|
................
|
||||||
|
................
|
||||||
|
|
||||||
|
[display_glyph bed_heat2]
|
||||||
|
data:
|
||||||
|
................
|
||||||
|
................
|
||||||
|
..*....*....*...
|
||||||
|
...*....*....*..
|
||||||
|
..*....*....*...
|
||||||
|
.*....*....*....
|
||||||
|
..*....*....*...
|
||||||
|
...*....*....*..
|
||||||
|
..*....*....*...
|
||||||
|
................
|
||||||
|
................
|
||||||
|
...*********....
|
||||||
|
..*.........*...
|
||||||
|
.*************..
|
||||||
|
................
|
||||||
|
................
|
||||||
|
|
||||||
|
[display_glyph fan1]
|
||||||
|
data:
|
||||||
|
................
|
||||||
|
................
|
||||||
|
....***.........
|
||||||
|
...****....**...
|
||||||
|
...****...****..
|
||||||
|
....***..*****..
|
||||||
|
.....*....****..
|
||||||
|
.......**.......
|
||||||
|
.......**.......
|
||||||
|
..****....*.....
|
||||||
|
..*****..***....
|
||||||
|
..****...****...
|
||||||
|
...**....****...
|
||||||
|
.........***....
|
||||||
|
................
|
||||||
|
................
|
||||||
|
|
||||||
|
[display_glyph fan2]
|
||||||
|
data:
|
||||||
|
................
|
||||||
|
................
|
||||||
|
.......****.....
|
||||||
|
.......****.....
|
||||||
|
.......***......
|
||||||
|
..**...**.......
|
||||||
|
..***...........
|
||||||
|
..****.**.****..
|
||||||
|
..****.**.****..
|
||||||
|
...........***..
|
||||||
|
.......**...**..
|
||||||
|
......***.......
|
||||||
|
.....****.......
|
||||||
|
.....****.......
|
||||||
|
................
|
||||||
|
................
|
||||||
|
|
||||||
|
[display_glyph feedrate]
|
||||||
|
data:
|
||||||
|
................
|
||||||
|
................
|
||||||
|
***.***.***.**..
|
||||||
|
*...*...*...*.*.
|
||||||
|
**..**..**..*.*.
|
||||||
|
*...*...*...*.*.
|
||||||
|
*...***.***.**..
|
||||||
|
................
|
||||||
|
**...*..***.***.
|
||||||
|
*.*.*.*..*..*...
|
||||||
|
**..***..*..**..
|
||||||
|
*.*.*.*..*..*...
|
||||||
|
*.*.*.*..*..***.
|
||||||
|
................
|
||||||
|
................
|
||||||
|
................
|
||||||
|
|
||||||
|
# In addition to the above glyphs, 16x4 displays also have the
|
||||||
|
# following hard-coded single character glyphs: right_arrow, degrees.
|
||||||
|
|
||||||
|
|
||||||
|
######################################################################
|
||||||
|
# Default 20x4 glyphs
|
||||||
|
######################################################################
|
||||||
|
|
||||||
|
[display_glyph extruder]
|
||||||
|
hd44780_slot: 0
|
||||||
|
hd44780_data:
|
||||||
|
..*..
|
||||||
|
.*.*.
|
||||||
|
.*.*.
|
||||||
|
.*.*.
|
||||||
|
.*.*.
|
||||||
|
*...*
|
||||||
|
*...*
|
||||||
|
.***.
|
||||||
|
|
||||||
|
[display_glyph bed]
|
||||||
|
hd44780_slot: 1
|
||||||
|
hd44780_data:
|
||||||
|
.....
|
||||||
|
*****
|
||||||
|
*.*.*
|
||||||
|
*...*
|
||||||
|
*.*.*
|
||||||
|
*****
|
||||||
|
.....
|
||||||
|
.....
|
||||||
|
|
||||||
|
[display_glyph bed_heat1]
|
||||||
|
hd44780_slot: 1
|
||||||
|
hd44780_data:
|
||||||
|
.*..*
|
||||||
|
*..*.
|
||||||
|
.*..*
|
||||||
|
*..*.
|
||||||
|
.....
|
||||||
|
*****
|
||||||
|
.....
|
||||||
|
.....
|
||||||
|
|
||||||
|
[display_glyph bed_heat2]
|
||||||
|
hd44780_slot: 1
|
||||||
|
hd44780_data:
|
||||||
|
*..*.
|
||||||
|
.*..*
|
||||||
|
*..*.
|
||||||
|
.*..*
|
||||||
|
.....
|
||||||
|
*****
|
||||||
|
.....
|
||||||
|
.....
|
||||||
|
|
||||||
|
[display_glyph fan]
|
||||||
|
hd44780_slot: 2
|
||||||
|
hd44780_data:
|
||||||
|
.....
|
||||||
|
*..**
|
||||||
|
**.*.
|
||||||
|
..*..
|
||||||
|
.*.**
|
||||||
|
**..*
|
||||||
|
.....
|
||||||
|
.....
|
||||||
|
|
||||||
|
[display_glyph feedrate]
|
||||||
|
hd44780_slot: 3
|
||||||
|
hd44780_data:
|
||||||
|
***..
|
||||||
|
*....
|
||||||
|
**...
|
||||||
|
*.***
|
||||||
|
..*.*
|
||||||
|
..**.
|
||||||
|
..*.*
|
||||||
|
.....
|
||||||
|
|
||||||
|
[display_glyph clock]
|
||||||
|
hd44780_slot: 4
|
||||||
|
hd44780_data:
|
||||||
|
.....
|
||||||
|
.***.
|
||||||
|
*..**
|
||||||
|
*.*.*
|
||||||
|
*...*
|
||||||
|
.***.
|
||||||
|
.....
|
||||||
|
.....
|
||||||
|
|
||||||
|
[display_glyph degrees]
|
||||||
|
hd44780_slot: 5
|
||||||
|
hd44780_data:
|
||||||
|
.**..
|
||||||
|
*..*.
|
||||||
|
*..*.
|
||||||
|
.**..
|
||||||
|
.....
|
||||||
|
.....
|
||||||
|
.....
|
||||||
|
.....
|
||||||
|
|
||||||
|
[display_glyph usb]
|
||||||
|
hd44780_slot: 6
|
||||||
|
hd44780_data:
|
||||||
|
.***.
|
||||||
|
.***.
|
||||||
|
.***.
|
||||||
|
*****
|
||||||
|
*****
|
||||||
|
*****
|
||||||
|
..*..
|
||||||
|
..*..
|
||||||
|
|
||||||
|
[display_glyph sd]
|
||||||
|
hd44780_slot: 6
|
||||||
|
hd44780_data:
|
||||||
|
.....
|
||||||
|
..***
|
||||||
|
.****
|
||||||
|
*****
|
||||||
|
*****
|
||||||
|
*****
|
||||||
|
*****
|
||||||
|
.....
|
||||||
|
|
||||||
|
# In addition to the above glyphs, 20x4 displays also have the
|
||||||
|
# following hard-coded glyphs: right_arrow.
|
||||||
37
macros.cfg
37
macros.cfg
@ -2,10 +2,40 @@
|
|||||||
# Macros
|
# Macros
|
||||||
#####################################################################
|
#####################################################################
|
||||||
|
|
||||||
|
[gcode_macro FILAMENT_STATE]
|
||||||
|
gcode:
|
||||||
|
SAVE_VARIABLE VARIABLE=filament_loaded VALUE={(params.LOADED | int) > 0}
|
||||||
|
|
||||||
|
[gcode_macro FILAMENT_CHANGE]
|
||||||
|
variable_state: 0
|
||||||
|
variable_allow_change: 0
|
||||||
|
|
||||||
|
gcode:
|
||||||
|
{% if params.STATE is defined %}
|
||||||
|
SET_GCODE_VARIABLE MACRO=FILAMENT_CHANGE VARIABLE=state VALUE={(params.STATE | int) > 0}
|
||||||
|
{% endif %}
|
||||||
|
{% if params.ALLOW_CHANGE is defined %}
|
||||||
|
SET_GCODE_VARIABLE MACRO=FILAMENT_CHANGE VARIABLE=allow_change VALUE={(params.ALLOW_CHANGE | int) > 0}
|
||||||
|
{% endif %}
|
||||||
|
[gcode_macro M73]
|
||||||
|
rename_existing: M73.1
|
||||||
|
variable_p: 0.0
|
||||||
|
variable_rtime: 0.0
|
||||||
|
|
||||||
|
gcode:
|
||||||
|
SET_GCODE_VARIABLE MACRO=M73 VARIABLE=rtime VALUE={params.R | int}
|
||||||
|
{% if params.P is defined %}
|
||||||
|
SET_GCODE_VARIABLE MACRO=M73 VARIABLE=p VALUE={params.P | int}
|
||||||
|
M73.1 P{params.P}
|
||||||
|
{% endif %}
|
||||||
|
|
||||||
[gcode_macro G32]
|
[gcode_macro G32]
|
||||||
gcode:
|
gcode:
|
||||||
BED_MESH_CLEAR
|
{% if 'x' in printer.toolhead.homed_axes and 'y' in printer.toolhead.homed_axes %}
|
||||||
|
G28 Z
|
||||||
|
{% else %}
|
||||||
G28
|
G28
|
||||||
|
{% endif %}
|
||||||
QUAD_GANTRY_LEVEL
|
QUAD_GANTRY_LEVEL
|
||||||
G0 X340 Y340 F18000
|
G0 X340 Y340 F18000
|
||||||
G28
|
G28
|
||||||
@ -35,6 +65,11 @@ gcode:
|
|||||||
[gcode_macro PRINT_START]
|
[gcode_macro PRINT_START]
|
||||||
# Use PRINT_START for the slicer starting script - please customise for your slicer of choice
|
# Use PRINT_START for the slicer starting script - please customise for your slicer of choice
|
||||||
gcode:
|
gcode:
|
||||||
|
G28 X Y
|
||||||
|
M190 S{params.BED | int}
|
||||||
|
M109 S{params.EXTRUDER | int}
|
||||||
|
|
||||||
|
BED_MESH_CLEAR
|
||||||
G32 ; home all axes
|
G32 ; home all axes
|
||||||
G1 Z20 F3000 ; move nozzle away from bed
|
G1 Z20 F3000 ; move nozzle away from bed
|
||||||
|
|
||||||
|
|||||||
209
menu.cfg
209
menu.cfg
@ -1,3 +1,212 @@
|
|||||||
|
[menu __main __temp __hotend0_target]
|
||||||
|
type: input
|
||||||
|
enable: {('extruder' in printer) and ('extruder' in printer.heaters.available_heaters)}
|
||||||
|
name: {"Ex0:%3.0f (%4.0f)" % (menu.input, printer.extruder.temperature)}
|
||||||
|
input: {printer.extruder.target}
|
||||||
|
input_min: 0
|
||||||
|
input_max: {printer.configfile.config.extruder.max_temp}
|
||||||
|
input_step: 1
|
||||||
|
gcode: M104 T0 S{'%.0f' % menu.input}
|
||||||
|
|
||||||
|
[menu __main __temp __hotend1_target]
|
||||||
|
type: input
|
||||||
|
enable: {('extruder1' in printer) and ('extruder1' in printer.heaters.available_heaters)}
|
||||||
|
name: {"Ex1:%3.0f (%4.0f)" % (menu.input, printer.extruder1.temperature)}
|
||||||
|
input: {printer.extruder1.target}
|
||||||
|
input_min: 0
|
||||||
|
input_max: {printer.configfile.config.extruder1.max_temp}
|
||||||
|
input_step: 1
|
||||||
|
gcode: M104 T1 S{'%.0f' % menu.input}
|
||||||
|
|
||||||
|
[menu __main __temp __hotbed_target]
|
||||||
|
type: input
|
||||||
|
enable: {'heater_bed' in printer}
|
||||||
|
name: {"Bed:%3.0f (%4.0f)" % (menu.input, printer.heater_bed.temperature)}
|
||||||
|
input: {printer.heater_bed.target}
|
||||||
|
input_min: 0
|
||||||
|
input_max: {printer.configfile.config.heater_bed.max_temp}
|
||||||
|
input_step: 1
|
||||||
|
gcode: M140 S{'%.0f' % menu.input}
|
||||||
|
|
||||||
|
[menu __main __temp __preheat_pla]
|
||||||
|
type: list
|
||||||
|
name: Preheat PLA
|
||||||
|
|
||||||
|
[menu __main __temp __preheat_pla __all]
|
||||||
|
type: command
|
||||||
|
enable: {('extruder' in printer) and ('heater_bed' in printer)}
|
||||||
|
name: Preheat all
|
||||||
|
gcode:
|
||||||
|
M140 S60
|
||||||
|
M104 S200
|
||||||
|
|
||||||
|
[menu __main __temp __preheat_pla __hotend]
|
||||||
|
type: command
|
||||||
|
enable: {'extruder' in printer}
|
||||||
|
name: Preheat hotend
|
||||||
|
gcode: M104 S200
|
||||||
|
|
||||||
|
[menu __main __temp __preheat_pla __hotbed]
|
||||||
|
type: command
|
||||||
|
enable: {'heater_bed' in printer}
|
||||||
|
name: Preheat hotbed
|
||||||
|
gcode: M140 S60
|
||||||
|
|
||||||
|
[menu __main __temp __preheat_abs]
|
||||||
|
type: list
|
||||||
|
name: Preheat ABS
|
||||||
|
|
||||||
|
[menu __main __temp __preheat_abs __all]
|
||||||
|
type: command
|
||||||
|
enable: {('extruder' in printer) and ('heater_bed' in printer)}
|
||||||
|
name: Preheat all
|
||||||
|
gcode:
|
||||||
|
M140 S110
|
||||||
|
M104 S245
|
||||||
|
|
||||||
|
[menu __main __temp __preheat_abs __hotend]
|
||||||
|
type: command
|
||||||
|
enable: {'extruder' in printer}
|
||||||
|
name: Preheat hotend
|
||||||
|
gcode: M104 S245
|
||||||
|
|
||||||
|
[menu __main __temp __preheat_abs __hotbed]
|
||||||
|
type: command
|
||||||
|
enable: {'heater_bed' in printer}
|
||||||
|
name: Preheat hotbed
|
||||||
|
gcode: M140 S110
|
||||||
|
|
||||||
|
[menu __main __temp __preheat_petg]
|
||||||
|
type: list
|
||||||
|
name: Preheat PETG
|
||||||
|
index: 4
|
||||||
|
|
||||||
|
[menu __main __temp __preheat_petg __all]
|
||||||
|
type: command
|
||||||
|
enable: {('extruder' in printer) and ('heater_bed' in printer)}
|
||||||
|
name: Preheat all
|
||||||
|
gcode:
|
||||||
|
M140 S60
|
||||||
|
M104 S230
|
||||||
|
|
||||||
|
[menu __main __temp __preheat_petg __hotend]
|
||||||
|
type: command
|
||||||
|
enable: {'extruder' in printer}
|
||||||
|
name: Preheat hotend
|
||||||
|
gcode: M104 S230
|
||||||
|
|
||||||
|
[menu __main __temp __preheat_petg __hotbed]
|
||||||
|
type: command
|
||||||
|
enable: {'heater_bed' in printer}
|
||||||
|
name: Preheat hotbed
|
||||||
|
gcode: M140 S60
|
||||||
|
|
||||||
|
[menu __main __temp __cooldown]
|
||||||
|
type: list
|
||||||
|
name: Cooldown
|
||||||
|
|
||||||
|
[menu __main __temp __cooldown __all]
|
||||||
|
type: command
|
||||||
|
enable: {('extruder' in printer) and ('heater_bed' in printer)}
|
||||||
|
name: Cooldown all
|
||||||
|
gcode:
|
||||||
|
M104 S0
|
||||||
|
M140 S0
|
||||||
|
|
||||||
|
[menu __main __temp __cooldown __hotend]
|
||||||
|
type: command
|
||||||
|
enable: {'extruder' in printer}
|
||||||
|
name: Cooldown hotend
|
||||||
|
gcode: M104 S0
|
||||||
|
|
||||||
|
[menu __main __temp __cooldown __hotbed]
|
||||||
|
type: command
|
||||||
|
enable: {'heater_bed' in printer}
|
||||||
|
name: Cooldown hotbed
|
||||||
|
gcode: M140 S0
|
||||||
|
|
||||||
|
### menu filament ###
|
||||||
|
|
||||||
|
[menu __main __filament]
|
||||||
|
type: list
|
||||||
|
name: Filament
|
||||||
|
|
||||||
|
[menu __main __filament __preheat]
|
||||||
|
type: disabled
|
||||||
|
name: Preheat
|
||||||
|
|
||||||
|
[menu __main __filament __preheat __preheat_pla]
|
||||||
|
type: command
|
||||||
|
enable: {'heater_bed' in printer}
|
||||||
|
name: Preheat PLA
|
||||||
|
gcode:
|
||||||
|
M104 210
|
||||||
|
{menu.back(true, true)}
|
||||||
|
|
||||||
|
[menu __main __filament __preheat __preheat_petg]
|
||||||
|
type: command
|
||||||
|
enable: {'heater_bed' in printer}
|
||||||
|
name: Preheat PETG
|
||||||
|
gcode:
|
||||||
|
M104 230
|
||||||
|
{menu.back(true, true)}
|
||||||
|
|
||||||
|
[menu __main __filament __preheat __preheat_abs]
|
||||||
|
type: command
|
||||||
|
enable: {'heater_bed' in printer}
|
||||||
|
name: Preheat ABS
|
||||||
|
gcode:
|
||||||
|
M104 245
|
||||||
|
{menu.back(true, true)}
|
||||||
|
|
||||||
|
[menu __main __filament __hotend0_target]
|
||||||
|
type: input
|
||||||
|
enable: {'extruder' in printer}
|
||||||
|
name: {"Ex0:%3.0f (%4.0f)" % (menu.input, printer.extruder.temperature)}
|
||||||
|
input: {printer.extruder.target}
|
||||||
|
input_min: 0
|
||||||
|
input_max: {printer.configfile.config.extruder.max_temp}
|
||||||
|
input_step: 1
|
||||||
|
gcode: M104 T0 S{'%.0f' % menu.input}
|
||||||
|
|
||||||
|
[menu __main __filament __loadf]
|
||||||
|
type: disabled
|
||||||
|
|
||||||
|
[menu __main __filament __loads]
|
||||||
|
type: command
|
||||||
|
name: Load Filament
|
||||||
|
gcode:
|
||||||
|
SAVE_GCODE_STATE NAME=__filament__load
|
||||||
|
M83
|
||||||
|
G1 E50 F350
|
||||||
|
G1 E10 F350
|
||||||
|
RESTORE_GCODE_STATE NAME=__filament__load
|
||||||
|
|
||||||
|
[menu __main __filament __unloadf]
|
||||||
|
type: disabled
|
||||||
|
|
||||||
|
[menu __main __filament __unloads]
|
||||||
|
type: command
|
||||||
|
name: Unload Filament
|
||||||
|
gcode:
|
||||||
|
SAVE_GCODE_STATE NAME=__filament__load
|
||||||
|
M83
|
||||||
|
G1 E-50 F350
|
||||||
|
G1 E-10 F350
|
||||||
|
RESTORE_GCODE_STATE NAME=__filament__load
|
||||||
|
|
||||||
|
[menu __main __filament __feed]
|
||||||
|
type: input
|
||||||
|
name: Feed: {'%.1f' % menu.input}
|
||||||
|
input: 5
|
||||||
|
input_step: 0.1
|
||||||
|
gcode:
|
||||||
|
SAVE_GCODE_STATE NAME=__filament__load
|
||||||
|
M83
|
||||||
|
G1 E{'%.1f' % menu.input} F60
|
||||||
|
RESTORE_GCODE_STATE NAME=__filament__load
|
||||||
|
|
||||||
|
|
||||||
### menu move 10mm ###
|
### menu move 10mm ###
|
||||||
[menu __main __control __move_10mm]
|
[menu __main __control __move_10mm]
|
||||||
type: list
|
type: list
|
||||||
|
|||||||
@ -511,6 +511,14 @@ pin: EXP1_1
|
|||||||
#####################################################################
|
#####################################################################
|
||||||
[include macros.cfg]
|
[include macros.cfg]
|
||||||
|
|
||||||
|
#####################################################################
|
||||||
|
# Display
|
||||||
|
#####################################################################
|
||||||
|
[include display.cfg]
|
||||||
|
|
||||||
|
[save_variables]
|
||||||
|
filename: /home/pi/Voron2_Config/variables.cfg
|
||||||
|
|
||||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||||
#*#
|
#*#
|
||||||
|
|||||||
4
variables.cfg
Normal file
4
variables.cfg
Normal file
@ -0,0 +1,4 @@
|
|||||||
|
[Variables]
|
||||||
|
filament_loaded = True
|
||||||
|
test = 'PLA,123,123'
|
||||||
|
|
||||||
Loading…
Reference in New Issue
Block a user