Update to current running config
Signed-off-by: Thomas Schmid <tom@binary-kitchen.de>
This commit is contained in:
parent
3e184f03ad
commit
7b2ce94b70
450
display.cfg
Normal file
450
display.cfg
Normal file
@ -0,0 +1,450 @@
|
||||
# This file defines the default layout of the printer's lcd display.
|
||||
|
||||
# It is not necessary to edit this file to change the display.
|
||||
# Instead, one may override any of the sections defined here by
|
||||
# defining a section with the same name in the main printer.cfg config
|
||||
# file.
|
||||
|
||||
|
||||
######################################################################
|
||||
# Helper macros for showing common screen values
|
||||
######################################################################
|
||||
|
||||
[display_template _heater_temperature]
|
||||
param_heater_name: "extruder"
|
||||
text:
|
||||
{% if param_heater_name in printer %}
|
||||
{% set heater = printer[param_heater_name] %}
|
||||
# Show glyph
|
||||
{% if param_heater_name == "heater_bed" %}
|
||||
{% if heater.target %}
|
||||
{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
|
||||
~bed_heat{frame}~
|
||||
{% else %}
|
||||
~bed~
|
||||
{% endif %}
|
||||
{% else %}
|
||||
~extruder~
|
||||
{% endif %}
|
||||
# Show temperature
|
||||
{ "%3.0f/%.0f" % (heater.temperature, heater.target) }
|
||||
~degrees~
|
||||
{% endif %}
|
||||
|
||||
[display_template _printing_time]
|
||||
text:
|
||||
{% set ptime = printer.idle_timeout.printing_time %}
|
||||
{% set rtime = printer["gcode_macro M73"].rtime %}
|
||||
{ "P%02d:%02d R%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60, rtime // 60, rtime % 60) }
|
||||
|
||||
[display_template _print_status]
|
||||
text:
|
||||
{% if printer.display_status.message %}
|
||||
{ printer.display_status.message }
|
||||
{% elif printer.idle_timeout.printing_time %}
|
||||
{% set pos = printer.toolhead.position %}
|
||||
{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
|
||||
{% else %}
|
||||
Ready
|
||||
{% endif %}
|
||||
|
||||
|
||||
######################################################################
|
||||
# Default 16x4 display
|
||||
######################################################################
|
||||
|
||||
[display_data _default_16x4 extruder]
|
||||
position: 0, 0
|
||||
text:
|
||||
{% set active_extruder = printer.toolhead.extruder %}
|
||||
{ render("_heater_temperature", param_heater_name=active_extruder) }
|
||||
|
||||
[display_data _default_16x4 fan]
|
||||
position: 0, 10
|
||||
text: { render("_fan_speed") }
|
||||
|
||||
[display_data _default_16x4 heater_bed]
|
||||
position: 1, 0
|
||||
text: { render("_heater_temperature", param_heater_name="heater_bed") }
|
||||
|
||||
[display_data _default_16x4 speed_factor]
|
||||
position: 1, 10
|
||||
text:
|
||||
~feedrate~
|
||||
{ "{:>4.0%}".format(printer.gcode_move.speed_factor) }
|
||||
|
||||
#
|
||||
# Progress bar
|
||||
#
|
||||
[display_data _default_16x4 print_progress]
|
||||
position: 2, 0
|
||||
#text: { "{:^5.0%}".format(printer.display_status.progress) }
|
||||
text: ""
|
||||
|
||||
[display_data _default_16x4 progress_bar]
|
||||
position: 2, 1 # Draw graphical progress bar after text is written
|
||||
#text: { draw_progress_bar(2, 0, 5, printer.display_status.progress) }
|
||||
text: ""
|
||||
|
||||
[display_data _default_16x4 printing_time]
|
||||
position: 2, 1
|
||||
text: { "%s" % (render("_printing_time").strip(),) }
|
||||
|
||||
[display_data _default_16x4 print_status]
|
||||
position: 3, 0
|
||||
text: { render("_print_status") }
|
||||
|
||||
|
||||
######################################################################
|
||||
# Alternative 16x4 layout for multi-extruders
|
||||
######################################################################
|
||||
|
||||
[display_data _multiextruder_16x4 extruder]
|
||||
position: 0, 0
|
||||
text: { render("_heater_temperature", param_heater_name="extruder") }
|
||||
|
||||
[display_data _multiextruder_16x4 fan]
|
||||
position: 0, 10
|
||||
text: { render("_fan_speed") }
|
||||
|
||||
[display_data _multiextruder_16x4 extruder1]
|
||||
position: 1, 0
|
||||
text: { render("_heater_temperature", param_heater_name="extruder1") }
|
||||
|
||||
[display_data _multiextruder_16x4 print_progress]
|
||||
position: 1, 10
|
||||
text: { "{:^6.0%}".format(printer.display_status.progress) }
|
||||
[display_data _multiextruder_16x4 progress_bar]
|
||||
position: 1, 11 # Draw graphical progress bar after text is written
|
||||
text: { draw_progress_bar(1, 10, 6, printer.display_status.progress) }
|
||||
|
||||
[display_data _multiextruder_16x4 heater_bed]
|
||||
position: 2, 0
|
||||
text: { render("_heater_temperature", param_heater_name="heater_bed") }
|
||||
|
||||
[display_data _multiextruder_16x4 printing_time]
|
||||
position: 2, 5
|
||||
text: { "%6s" % (render("_printing_time").strip(),) }
|
||||
|
||||
[display_data _multiextruder_16x4 print_status]
|
||||
position: 3, 0
|
||||
text: { render("_print_status") }
|
||||
|
||||
|
||||
######################################################################
|
||||
# Default 20x4 display
|
||||
######################################################################
|
||||
|
||||
[display_data _default_20x4 extruder]
|
||||
position: 0, 0
|
||||
text: { render("_heater_temperature", param_heater_name="extruder") }
|
||||
|
||||
[display_data _default_20x4 heater_bed]
|
||||
position: 0, 10
|
||||
text: { render("_heater_temperature", param_heater_name="heater_bed") }
|
||||
|
||||
[display_data _default_20x4 extruder1]
|
||||
position: 1, 0
|
||||
text: { render("_heater_temperature", param_heater_name="extruder1") }
|
||||
|
||||
[display_data _default_20x4 fan]
|
||||
position: 1, 10
|
||||
text:
|
||||
{% if 'fan' in printer %}
|
||||
{ "Fan {:^4.0%}".format(printer.fan.speed) }
|
||||
{% endif %}
|
||||
|
||||
[display_data _default_20x4 speed_factor]
|
||||
position: 2, 0
|
||||
text:
|
||||
~feedrate~
|
||||
{ "{:^4.0%}".format(printer.gcode_move.speed_factor) }
|
||||
|
||||
[display_data _default_20x4 print_progress]
|
||||
position: 2, 8
|
||||
text:
|
||||
{% if 'virtual_sdcard' in printer and printer.virtual_sdcard.progress %}
|
||||
~sd~
|
||||
{% else %}
|
||||
~usb~
|
||||
{% endif %}
|
||||
{ "{:^4.0%}".format(printer.display_status.progress) }
|
||||
|
||||
[display_data _default_20x4 printing_time]
|
||||
position: 2, 14
|
||||
text:
|
||||
~clock~
|
||||
{ render("_printing_time") }
|
||||
|
||||
[display_data _default_20x4 print_status]
|
||||
position: 3, 0
|
||||
text: { render("_print_status") }
|
||||
|
||||
|
||||
######################################################################
|
||||
# Default 16x4 glyphs
|
||||
######################################################################
|
||||
|
||||
[display_glyph extruder]
|
||||
data:
|
||||
................
|
||||
................
|
||||
..************..
|
||||
.....******.....
|
||||
..************..
|
||||
.....******.....
|
||||
..************..
|
||||
................
|
||||
....********....
|
||||
....******.*....
|
||||
....********....
|
||||
................
|
||||
......****......
|
||||
.......**.......
|
||||
................
|
||||
................
|
||||
|
||||
[display_glyph bed]
|
||||
data:
|
||||
................
|
||||
................
|
||||
................
|
||||
................
|
||||
................
|
||||
................
|
||||
................
|
||||
................
|
||||
................
|
||||
................
|
||||
................
|
||||
...*********....
|
||||
..*.........*...
|
||||
.*************..
|
||||
................
|
||||
................
|
||||
|
||||
[display_glyph bed_heat1]
|
||||
data:
|
||||
................
|
||||
................
|
||||
..*....*....*...
|
||||
.*....*....*....
|
||||
..*....*....*...
|
||||
...*....*....*..
|
||||
..*....*....*...
|
||||
.*....*....*....
|
||||
..*....*....*...
|
||||
................
|
||||
................
|
||||
...*********....
|
||||
..*.........*...
|
||||
.*************..
|
||||
................
|
||||
................
|
||||
|
||||
[display_glyph bed_heat2]
|
||||
data:
|
||||
................
|
||||
................
|
||||
..*....*....*...
|
||||
...*....*....*..
|
||||
..*....*....*...
|
||||
.*....*....*....
|
||||
..*....*....*...
|
||||
...*....*....*..
|
||||
..*....*....*...
|
||||
................
|
||||
................
|
||||
...*********....
|
||||
..*.........*...
|
||||
.*************..
|
||||
................
|
||||
................
|
||||
|
||||
[display_glyph fan1]
|
||||
data:
|
||||
................
|
||||
................
|
||||
....***.........
|
||||
...****....**...
|
||||
...****...****..
|
||||
....***..*****..
|
||||
.....*....****..
|
||||
.......**.......
|
||||
.......**.......
|
||||
..****....*.....
|
||||
..*****..***....
|
||||
..****...****...
|
||||
...**....****...
|
||||
.........***....
|
||||
................
|
||||
................
|
||||
|
||||
[display_glyph fan2]
|
||||
data:
|
||||
................
|
||||
................
|
||||
.......****.....
|
||||
.......****.....
|
||||
.......***......
|
||||
..**...**.......
|
||||
..***...........
|
||||
..****.**.****..
|
||||
..****.**.****..
|
||||
...........***..
|
||||
.......**...**..
|
||||
......***.......
|
||||
.....****.......
|
||||
.....****.......
|
||||
................
|
||||
................
|
||||
|
||||
[display_glyph feedrate]
|
||||
data:
|
||||
................
|
||||
................
|
||||
***.***.***.**..
|
||||
*...*...*...*.*.
|
||||
**..**..**..*.*.
|
||||
*...*...*...*.*.
|
||||
*...***.***.**..
|
||||
................
|
||||
**...*..***.***.
|
||||
*.*.*.*..*..*...
|
||||
**..***..*..**..
|
||||
*.*.*.*..*..*...
|
||||
*.*.*.*..*..***.
|
||||
................
|
||||
................
|
||||
................
|
||||
|
||||
# In addition to the above glyphs, 16x4 displays also have the
|
||||
# following hard-coded single character glyphs: right_arrow, degrees.
|
||||
|
||||
|
||||
######################################################################
|
||||
# Default 20x4 glyphs
|
||||
######################################################################
|
||||
|
||||
[display_glyph extruder]
|
||||
hd44780_slot: 0
|
||||
hd44780_data:
|
||||
..*..
|
||||
.*.*.
|
||||
.*.*.
|
||||
.*.*.
|
||||
.*.*.
|
||||
*...*
|
||||
*...*
|
||||
.***.
|
||||
|
||||
[display_glyph bed]
|
||||
hd44780_slot: 1
|
||||
hd44780_data:
|
||||
.....
|
||||
*****
|
||||
*.*.*
|
||||
*...*
|
||||
*.*.*
|
||||
*****
|
||||
.....
|
||||
.....
|
||||
|
||||
[display_glyph bed_heat1]
|
||||
hd44780_slot: 1
|
||||
hd44780_data:
|
||||
.*..*
|
||||
*..*.
|
||||
.*..*
|
||||
*..*.
|
||||
.....
|
||||
*****
|
||||
.....
|
||||
.....
|
||||
|
||||
[display_glyph bed_heat2]
|
||||
hd44780_slot: 1
|
||||
hd44780_data:
|
||||
*..*.
|
||||
.*..*
|
||||
*..*.
|
||||
.*..*
|
||||
.....
|
||||
*****
|
||||
.....
|
||||
.....
|
||||
|
||||
[display_glyph fan]
|
||||
hd44780_slot: 2
|
||||
hd44780_data:
|
||||
.....
|
||||
*..**
|
||||
**.*.
|
||||
..*..
|
||||
.*.**
|
||||
**..*
|
||||
.....
|
||||
.....
|
||||
|
||||
[display_glyph feedrate]
|
||||
hd44780_slot: 3
|
||||
hd44780_data:
|
||||
***..
|
||||
*....
|
||||
**...
|
||||
*.***
|
||||
..*.*
|
||||
..**.
|
||||
..*.*
|
||||
.....
|
||||
|
||||
[display_glyph clock]
|
||||
hd44780_slot: 4
|
||||
hd44780_data:
|
||||
.....
|
||||
.***.
|
||||
*..**
|
||||
*.*.*
|
||||
*...*
|
||||
.***.
|
||||
.....
|
||||
.....
|
||||
|
||||
[display_glyph degrees]
|
||||
hd44780_slot: 5
|
||||
hd44780_data:
|
||||
.**..
|
||||
*..*.
|
||||
*..*.
|
||||
.**..
|
||||
.....
|
||||
.....
|
||||
.....
|
||||
.....
|
||||
|
||||
[display_glyph usb]
|
||||
hd44780_slot: 6
|
||||
hd44780_data:
|
||||
.***.
|
||||
.***.
|
||||
.***.
|
||||
*****
|
||||
*****
|
||||
*****
|
||||
..*..
|
||||
..*..
|
||||
|
||||
[display_glyph sd]
|
||||
hd44780_slot: 6
|
||||
hd44780_data:
|
||||
.....
|
||||
..***
|
||||
.****
|
||||
*****
|
||||
*****
|
||||
*****
|
||||
*****
|
||||
.....
|
||||
|
||||
# In addition to the above glyphs, 20x4 displays also have the
|
||||
# following hard-coded glyphs: right_arrow.
|
||||
37
macros.cfg
37
macros.cfg
@ -2,10 +2,40 @@
|
||||
# Macros
|
||||
#####################################################################
|
||||
|
||||
[gcode_macro FILAMENT_STATE]
|
||||
gcode:
|
||||
SAVE_VARIABLE VARIABLE=filament_loaded VALUE={(params.LOADED | int) > 0}
|
||||
|
||||
[gcode_macro FILAMENT_CHANGE]
|
||||
variable_state: 0
|
||||
variable_allow_change: 0
|
||||
|
||||
gcode:
|
||||
{% if params.STATE is defined %}
|
||||
SET_GCODE_VARIABLE MACRO=FILAMENT_CHANGE VARIABLE=state VALUE={(params.STATE | int) > 0}
|
||||
{% endif %}
|
||||
{% if params.ALLOW_CHANGE is defined %}
|
||||
SET_GCODE_VARIABLE MACRO=FILAMENT_CHANGE VARIABLE=allow_change VALUE={(params.ALLOW_CHANGE | int) > 0}
|
||||
{% endif %}
|
||||
[gcode_macro M73]
|
||||
rename_existing: M73.1
|
||||
variable_p: 0.0
|
||||
variable_rtime: 0.0
|
||||
|
||||
gcode:
|
||||
SET_GCODE_VARIABLE MACRO=M73 VARIABLE=rtime VALUE={params.R | int}
|
||||
{% if params.P is defined %}
|
||||
SET_GCODE_VARIABLE MACRO=M73 VARIABLE=p VALUE={params.P | int}
|
||||
M73.1 P{params.P}
|
||||
{% endif %}
|
||||
|
||||
[gcode_macro G32]
|
||||
gcode:
|
||||
BED_MESH_CLEAR
|
||||
{% if 'x' in printer.toolhead.homed_axes and 'y' in printer.toolhead.homed_axes %}
|
||||
G28 Z
|
||||
{% else %}
|
||||
G28
|
||||
{% endif %}
|
||||
QUAD_GANTRY_LEVEL
|
||||
G0 X340 Y340 F18000
|
||||
G28
|
||||
@ -35,6 +65,11 @@ gcode:
|
||||
[gcode_macro PRINT_START]
|
||||
# Use PRINT_START for the slicer starting script - please customise for your slicer of choice
|
||||
gcode:
|
||||
G28 X Y
|
||||
M190 S{params.BED | int}
|
||||
M109 S{params.EXTRUDER | int}
|
||||
|
||||
BED_MESH_CLEAR
|
||||
G32 ; home all axes
|
||||
G1 Z20 F3000 ; move nozzle away from bed
|
||||
|
||||
|
||||
209
menu.cfg
209
menu.cfg
@ -1,3 +1,212 @@
|
||||
[menu __main __temp __hotend0_target]
|
||||
type: input
|
||||
enable: {('extruder' in printer) and ('extruder' in printer.heaters.available_heaters)}
|
||||
name: {"Ex0:%3.0f (%4.0f)" % (menu.input, printer.extruder.temperature)}
|
||||
input: {printer.extruder.target}
|
||||
input_min: 0
|
||||
input_max: {printer.configfile.config.extruder.max_temp}
|
||||
input_step: 1
|
||||
gcode: M104 T0 S{'%.0f' % menu.input}
|
||||
|
||||
[menu __main __temp __hotend1_target]
|
||||
type: input
|
||||
enable: {('extruder1' in printer) and ('extruder1' in printer.heaters.available_heaters)}
|
||||
name: {"Ex1:%3.0f (%4.0f)" % (menu.input, printer.extruder1.temperature)}
|
||||
input: {printer.extruder1.target}
|
||||
input_min: 0
|
||||
input_max: {printer.configfile.config.extruder1.max_temp}
|
||||
input_step: 1
|
||||
gcode: M104 T1 S{'%.0f' % menu.input}
|
||||
|
||||
[menu __main __temp __hotbed_target]
|
||||
type: input
|
||||
enable: {'heater_bed' in printer}
|
||||
name: {"Bed:%3.0f (%4.0f)" % (menu.input, printer.heater_bed.temperature)}
|
||||
input: {printer.heater_bed.target}
|
||||
input_min: 0
|
||||
input_max: {printer.configfile.config.heater_bed.max_temp}
|
||||
input_step: 1
|
||||
gcode: M140 S{'%.0f' % menu.input}
|
||||
|
||||
[menu __main __temp __preheat_pla]
|
||||
type: list
|
||||
name: Preheat PLA
|
||||
|
||||
[menu __main __temp __preheat_pla __all]
|
||||
type: command
|
||||
enable: {('extruder' in printer) and ('heater_bed' in printer)}
|
||||
name: Preheat all
|
||||
gcode:
|
||||
M140 S60
|
||||
M104 S200
|
||||
|
||||
[menu __main __temp __preheat_pla __hotend]
|
||||
type: command
|
||||
enable: {'extruder' in printer}
|
||||
name: Preheat hotend
|
||||
gcode: M104 S200
|
||||
|
||||
[menu __main __temp __preheat_pla __hotbed]
|
||||
type: command
|
||||
enable: {'heater_bed' in printer}
|
||||
name: Preheat hotbed
|
||||
gcode: M140 S60
|
||||
|
||||
[menu __main __temp __preheat_abs]
|
||||
type: list
|
||||
name: Preheat ABS
|
||||
|
||||
[menu __main __temp __preheat_abs __all]
|
||||
type: command
|
||||
enable: {('extruder' in printer) and ('heater_bed' in printer)}
|
||||
name: Preheat all
|
||||
gcode:
|
||||
M140 S110
|
||||
M104 S245
|
||||
|
||||
[menu __main __temp __preheat_abs __hotend]
|
||||
type: command
|
||||
enable: {'extruder' in printer}
|
||||
name: Preheat hotend
|
||||
gcode: M104 S245
|
||||
|
||||
[menu __main __temp __preheat_abs __hotbed]
|
||||
type: command
|
||||
enable: {'heater_bed' in printer}
|
||||
name: Preheat hotbed
|
||||
gcode: M140 S110
|
||||
|
||||
[menu __main __temp __preheat_petg]
|
||||
type: list
|
||||
name: Preheat PETG
|
||||
index: 4
|
||||
|
||||
[menu __main __temp __preheat_petg __all]
|
||||
type: command
|
||||
enable: {('extruder' in printer) and ('heater_bed' in printer)}
|
||||
name: Preheat all
|
||||
gcode:
|
||||
M140 S60
|
||||
M104 S230
|
||||
|
||||
[menu __main __temp __preheat_petg __hotend]
|
||||
type: command
|
||||
enable: {'extruder' in printer}
|
||||
name: Preheat hotend
|
||||
gcode: M104 S230
|
||||
|
||||
[menu __main __temp __preheat_petg __hotbed]
|
||||
type: command
|
||||
enable: {'heater_bed' in printer}
|
||||
name: Preheat hotbed
|
||||
gcode: M140 S60
|
||||
|
||||
[menu __main __temp __cooldown]
|
||||
type: list
|
||||
name: Cooldown
|
||||
|
||||
[menu __main __temp __cooldown __all]
|
||||
type: command
|
||||
enable: {('extruder' in printer) and ('heater_bed' in printer)}
|
||||
name: Cooldown all
|
||||
gcode:
|
||||
M104 S0
|
||||
M140 S0
|
||||
|
||||
[menu __main __temp __cooldown __hotend]
|
||||
type: command
|
||||
enable: {'extruder' in printer}
|
||||
name: Cooldown hotend
|
||||
gcode: M104 S0
|
||||
|
||||
[menu __main __temp __cooldown __hotbed]
|
||||
type: command
|
||||
enable: {'heater_bed' in printer}
|
||||
name: Cooldown hotbed
|
||||
gcode: M140 S0
|
||||
|
||||
### menu filament ###
|
||||
|
||||
[menu __main __filament]
|
||||
type: list
|
||||
name: Filament
|
||||
|
||||
[menu __main __filament __preheat]
|
||||
type: disabled
|
||||
name: Preheat
|
||||
|
||||
[menu __main __filament __preheat __preheat_pla]
|
||||
type: command
|
||||
enable: {'heater_bed' in printer}
|
||||
name: Preheat PLA
|
||||
gcode:
|
||||
M104 210
|
||||
{menu.back(true, true)}
|
||||
|
||||
[menu __main __filament __preheat __preheat_petg]
|
||||
type: command
|
||||
enable: {'heater_bed' in printer}
|
||||
name: Preheat PETG
|
||||
gcode:
|
||||
M104 230
|
||||
{menu.back(true, true)}
|
||||
|
||||
[menu __main __filament __preheat __preheat_abs]
|
||||
type: command
|
||||
enable: {'heater_bed' in printer}
|
||||
name: Preheat ABS
|
||||
gcode:
|
||||
M104 245
|
||||
{menu.back(true, true)}
|
||||
|
||||
[menu __main __filament __hotend0_target]
|
||||
type: input
|
||||
enable: {'extruder' in printer}
|
||||
name: {"Ex0:%3.0f (%4.0f)" % (menu.input, printer.extruder.temperature)}
|
||||
input: {printer.extruder.target}
|
||||
input_min: 0
|
||||
input_max: {printer.configfile.config.extruder.max_temp}
|
||||
input_step: 1
|
||||
gcode: M104 T0 S{'%.0f' % menu.input}
|
||||
|
||||
[menu __main __filament __loadf]
|
||||
type: disabled
|
||||
|
||||
[menu __main __filament __loads]
|
||||
type: command
|
||||
name: Load Filament
|
||||
gcode:
|
||||
SAVE_GCODE_STATE NAME=__filament__load
|
||||
M83
|
||||
G1 E50 F350
|
||||
G1 E10 F350
|
||||
RESTORE_GCODE_STATE NAME=__filament__load
|
||||
|
||||
[menu __main __filament __unloadf]
|
||||
type: disabled
|
||||
|
||||
[menu __main __filament __unloads]
|
||||
type: command
|
||||
name: Unload Filament
|
||||
gcode:
|
||||
SAVE_GCODE_STATE NAME=__filament__load
|
||||
M83
|
||||
G1 E-50 F350
|
||||
G1 E-10 F350
|
||||
RESTORE_GCODE_STATE NAME=__filament__load
|
||||
|
||||
[menu __main __filament __feed]
|
||||
type: input
|
||||
name: Feed: {'%.1f' % menu.input}
|
||||
input: 5
|
||||
input_step: 0.1
|
||||
gcode:
|
||||
SAVE_GCODE_STATE NAME=__filament__load
|
||||
M83
|
||||
G1 E{'%.1f' % menu.input} F60
|
||||
RESTORE_GCODE_STATE NAME=__filament__load
|
||||
|
||||
|
||||
### menu move 10mm ###
|
||||
[menu __main __control __move_10mm]
|
||||
type: list
|
||||
|
||||
@ -511,6 +511,14 @@ pin: EXP1_1
|
||||
#####################################################################
|
||||
[include macros.cfg]
|
||||
|
||||
#####################################################################
|
||||
# Display
|
||||
#####################################################################
|
||||
[include display.cfg]
|
||||
|
||||
[save_variables]
|
||||
filename: /home/pi/Voron2_Config/variables.cfg
|
||||
|
||||
#*# <---------------------- SAVE_CONFIG ---------------------->
|
||||
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
||||
#*#
|
||||
|
||||
4
variables.cfg
Normal file
4
variables.cfg
Normal file
@ -0,0 +1,4 @@
|
||||
[Variables]
|
||||
filament_loaded = True
|
||||
test = 'PLA,123,123'
|
||||
|
||||
Loading…
Reference in New Issue
Block a user