451 lines
9.2 KiB
INI
451 lines
9.2 KiB
INI
# This file defines the default layout of the printer's lcd display.
|
|
|
|
# It is not necessary to edit this file to change the display.
|
|
# Instead, one may override any of the sections defined here by
|
|
# defining a section with the same name in the main printer.cfg config
|
|
# file.
|
|
|
|
|
|
######################################################################
|
|
# Helper macros for showing common screen values
|
|
######################################################################
|
|
|
|
[display_template _heater_temperature]
|
|
param_heater_name: "extruder"
|
|
text:
|
|
{% if param_heater_name in printer %}
|
|
{% set heater = printer[param_heater_name] %}
|
|
# Show glyph
|
|
{% if param_heater_name == "heater_bed" %}
|
|
{% if heater.target %}
|
|
{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
|
|
~bed_heat{frame}~
|
|
{% else %}
|
|
~bed~
|
|
{% endif %}
|
|
{% else %}
|
|
~extruder~
|
|
{% endif %}
|
|
# Show temperature
|
|
{ "%3.0f/%.0f" % (heater.temperature, heater.target) }
|
|
~degrees~
|
|
{% endif %}
|
|
|
|
[display_template _printing_time]
|
|
text:
|
|
{% set ptime = printer.idle_timeout.printing_time %}
|
|
{% set rtime = printer["gcode_macro M73"].rtime %}
|
|
{ "P%02d:%02d R%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60, rtime // 60, rtime % 60) }
|
|
|
|
[display_template _print_status]
|
|
text:
|
|
{% if printer.display_status.message %}
|
|
{ printer.display_status.message }
|
|
{% elif printer.idle_timeout.printing_time %}
|
|
{% set pos = printer.toolhead.position %}
|
|
{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
|
|
{% else %}
|
|
Ready
|
|
{% endif %}
|
|
|
|
|
|
######################################################################
|
|
# Default 16x4 display
|
|
######################################################################
|
|
|
|
[display_data _default_16x4 extruder]
|
|
position: 0, 0
|
|
text:
|
|
{% set active_extruder = printer.toolhead.extruder %}
|
|
{ render("_heater_temperature", param_heater_name=active_extruder) }
|
|
|
|
[display_data _default_16x4 fan]
|
|
position: 0, 10
|
|
text: { render("_fan_speed") }
|
|
|
|
[display_data _default_16x4 heater_bed]
|
|
position: 1, 0
|
|
text: { render("_heater_temperature", param_heater_name="heater_bed") }
|
|
|
|
[display_data _default_16x4 speed_factor]
|
|
position: 1, 10
|
|
text:
|
|
~feedrate~
|
|
{ "{:>4.0%}".format(printer.gcode_move.speed_factor) }
|
|
|
|
#
|
|
# Progress bar
|
|
#
|
|
[display_data _default_16x4 print_progress]
|
|
position: 2, 0
|
|
#text: { "{:^5.0%}".format(printer.display_status.progress) }
|
|
text: ""
|
|
|
|
[display_data _default_16x4 progress_bar]
|
|
position: 2, 1 # Draw graphical progress bar after text is written
|
|
#text: { draw_progress_bar(2, 0, 5, printer.display_status.progress) }
|
|
text: ""
|
|
|
|
[display_data _default_16x4 printing_time]
|
|
position: 2, 1
|
|
text: { "%s" % (render("_printing_time").strip(),) }
|
|
|
|
[display_data _default_16x4 print_status]
|
|
position: 3, 0
|
|
text: { render("_print_status") }
|
|
|
|
|
|
######################################################################
|
|
# Alternative 16x4 layout for multi-extruders
|
|
######################################################################
|
|
|
|
[display_data _multiextruder_16x4 extruder]
|
|
position: 0, 0
|
|
text: { render("_heater_temperature", param_heater_name="extruder") }
|
|
|
|
[display_data _multiextruder_16x4 fan]
|
|
position: 0, 10
|
|
text: { render("_fan_speed") }
|
|
|
|
[display_data _multiextruder_16x4 extruder1]
|
|
position: 1, 0
|
|
text: { render("_heater_temperature", param_heater_name="extruder1") }
|
|
|
|
[display_data _multiextruder_16x4 print_progress]
|
|
position: 1, 10
|
|
text: { "{:^6.0%}".format(printer.display_status.progress) }
|
|
[display_data _multiextruder_16x4 progress_bar]
|
|
position: 1, 11 # Draw graphical progress bar after text is written
|
|
text: { draw_progress_bar(1, 10, 6, printer.display_status.progress) }
|
|
|
|
[display_data _multiextruder_16x4 heater_bed]
|
|
position: 2, 0
|
|
text: { render("_heater_temperature", param_heater_name="heater_bed") }
|
|
|
|
[display_data _multiextruder_16x4 printing_time]
|
|
position: 2, 5
|
|
text: { "%6s" % (render("_printing_time").strip(),) }
|
|
|
|
[display_data _multiextruder_16x4 print_status]
|
|
position: 3, 0
|
|
text: { render("_print_status") }
|
|
|
|
|
|
######################################################################
|
|
# Default 20x4 display
|
|
######################################################################
|
|
|
|
[display_data _default_20x4 extruder]
|
|
position: 0, 0
|
|
text: { render("_heater_temperature", param_heater_name="extruder") }
|
|
|
|
[display_data _default_20x4 heater_bed]
|
|
position: 0, 10
|
|
text: { render("_heater_temperature", param_heater_name="heater_bed") }
|
|
|
|
[display_data _default_20x4 extruder1]
|
|
position: 1, 0
|
|
text: { render("_heater_temperature", param_heater_name="extruder1") }
|
|
|
|
[display_data _default_20x4 fan]
|
|
position: 1, 10
|
|
text:
|
|
{% if 'fan' in printer %}
|
|
{ "Fan {:^4.0%}".format(printer.fan.speed) }
|
|
{% endif %}
|
|
|
|
[display_data _default_20x4 speed_factor]
|
|
position: 2, 0
|
|
text:
|
|
~feedrate~
|
|
{ "{:^4.0%}".format(printer.gcode_move.speed_factor) }
|
|
|
|
[display_data _default_20x4 print_progress]
|
|
position: 2, 8
|
|
text:
|
|
{% if 'virtual_sdcard' in printer and printer.virtual_sdcard.progress %}
|
|
~sd~
|
|
{% else %}
|
|
~usb~
|
|
{% endif %}
|
|
{ "{:^4.0%}".format(printer.display_status.progress) }
|
|
|
|
[display_data _default_20x4 printing_time]
|
|
position: 2, 14
|
|
text:
|
|
~clock~
|
|
{ render("_printing_time") }
|
|
|
|
[display_data _default_20x4 print_status]
|
|
position: 3, 0
|
|
text: { render("_print_status") }
|
|
|
|
|
|
######################################################################
|
|
# Default 16x4 glyphs
|
|
######################################################################
|
|
|
|
[display_glyph extruder]
|
|
data:
|
|
................
|
|
................
|
|
..************..
|
|
.....******.....
|
|
..************..
|
|
.....******.....
|
|
..************..
|
|
................
|
|
....********....
|
|
....******.*....
|
|
....********....
|
|
................
|
|
......****......
|
|
.......**.......
|
|
................
|
|
................
|
|
|
|
[display_glyph bed]
|
|
data:
|
|
................
|
|
................
|
|
................
|
|
................
|
|
................
|
|
................
|
|
................
|
|
................
|
|
................
|
|
................
|
|
................
|
|
...*********....
|
|
..*.........*...
|
|
.*************..
|
|
................
|
|
................
|
|
|
|
[display_glyph bed_heat1]
|
|
data:
|
|
................
|
|
................
|
|
..*....*....*...
|
|
.*....*....*....
|
|
..*....*....*...
|
|
...*....*....*..
|
|
..*....*....*...
|
|
.*....*....*....
|
|
..*....*....*...
|
|
................
|
|
................
|
|
...*********....
|
|
..*.........*...
|
|
.*************..
|
|
................
|
|
................
|
|
|
|
[display_glyph bed_heat2]
|
|
data:
|
|
................
|
|
................
|
|
..*....*....*...
|
|
...*....*....*..
|
|
..*....*....*...
|
|
.*....*....*....
|
|
..*....*....*...
|
|
...*....*....*..
|
|
..*....*....*...
|
|
................
|
|
................
|
|
...*********....
|
|
..*.........*...
|
|
.*************..
|
|
................
|
|
................
|
|
|
|
[display_glyph fan1]
|
|
data:
|
|
................
|
|
................
|
|
....***.........
|
|
...****....**...
|
|
...****...****..
|
|
....***..*****..
|
|
.....*....****..
|
|
.......**.......
|
|
.......**.......
|
|
..****....*.....
|
|
..*****..***....
|
|
..****...****...
|
|
...**....****...
|
|
.........***....
|
|
................
|
|
................
|
|
|
|
[display_glyph fan2]
|
|
data:
|
|
................
|
|
................
|
|
.......****.....
|
|
.......****.....
|
|
.......***......
|
|
..**...**.......
|
|
..***...........
|
|
..****.**.****..
|
|
..****.**.****..
|
|
...........***..
|
|
.......**...**..
|
|
......***.......
|
|
.....****.......
|
|
.....****.......
|
|
................
|
|
................
|
|
|
|
[display_glyph feedrate]
|
|
data:
|
|
................
|
|
................
|
|
***.***.***.**..
|
|
*...*...*...*.*.
|
|
**..**..**..*.*.
|
|
*...*...*...*.*.
|
|
*...***.***.**..
|
|
................
|
|
**...*..***.***.
|
|
*.*.*.*..*..*...
|
|
**..***..*..**..
|
|
*.*.*.*..*..*...
|
|
*.*.*.*..*..***.
|
|
................
|
|
................
|
|
................
|
|
|
|
# In addition to the above glyphs, 16x4 displays also have the
|
|
# following hard-coded single character glyphs: right_arrow, degrees.
|
|
|
|
|
|
######################################################################
|
|
# Default 20x4 glyphs
|
|
######################################################################
|
|
|
|
[display_glyph extruder]
|
|
hd44780_slot: 0
|
|
hd44780_data:
|
|
..*..
|
|
.*.*.
|
|
.*.*.
|
|
.*.*.
|
|
.*.*.
|
|
*...*
|
|
*...*
|
|
.***.
|
|
|
|
[display_glyph bed]
|
|
hd44780_slot: 1
|
|
hd44780_data:
|
|
.....
|
|
*****
|
|
*.*.*
|
|
*...*
|
|
*.*.*
|
|
*****
|
|
.....
|
|
.....
|
|
|
|
[display_glyph bed_heat1]
|
|
hd44780_slot: 1
|
|
hd44780_data:
|
|
.*..*
|
|
*..*.
|
|
.*..*
|
|
*..*.
|
|
.....
|
|
*****
|
|
.....
|
|
.....
|
|
|
|
[display_glyph bed_heat2]
|
|
hd44780_slot: 1
|
|
hd44780_data:
|
|
*..*.
|
|
.*..*
|
|
*..*.
|
|
.*..*
|
|
.....
|
|
*****
|
|
.....
|
|
.....
|
|
|
|
[display_glyph fan]
|
|
hd44780_slot: 2
|
|
hd44780_data:
|
|
.....
|
|
*..**
|
|
**.*.
|
|
..*..
|
|
.*.**
|
|
**..*
|
|
.....
|
|
.....
|
|
|
|
[display_glyph feedrate]
|
|
hd44780_slot: 3
|
|
hd44780_data:
|
|
***..
|
|
*....
|
|
**...
|
|
*.***
|
|
..*.*
|
|
..**.
|
|
..*.*
|
|
.....
|
|
|
|
[display_glyph clock]
|
|
hd44780_slot: 4
|
|
hd44780_data:
|
|
.....
|
|
.***.
|
|
*..**
|
|
*.*.*
|
|
*...*
|
|
.***.
|
|
.....
|
|
.....
|
|
|
|
[display_glyph degrees]
|
|
hd44780_slot: 5
|
|
hd44780_data:
|
|
.**..
|
|
*..*.
|
|
*..*.
|
|
.**..
|
|
.....
|
|
.....
|
|
.....
|
|
.....
|
|
|
|
[display_glyph usb]
|
|
hd44780_slot: 6
|
|
hd44780_data:
|
|
.***.
|
|
.***.
|
|
.***.
|
|
*****
|
|
*****
|
|
*****
|
|
..*..
|
|
..*..
|
|
|
|
[display_glyph sd]
|
|
hd44780_slot: 6
|
|
hd44780_data:
|
|
.....
|
|
..***
|
|
.****
|
|
*****
|
|
*****
|
|
*****
|
|
*****
|
|
.....
|
|
|
|
# In addition to the above glyphs, 20x4 displays also have the
|
|
# following hard-coded glyphs: right_arrow.
|