merged sad to v2015.1

CHANGELOG.md

@@ -1,5 +1,15 @@
 # Freifunk Regensburg Firmware Changelog
 
+## v2015.1-ffrgb
+ - Update to Gluon v2015.1
+ - Integrated no_rebroadcast fix on mesh-vpn from Gluon Upstream
+ - Added FFMuc custom gluon packages with ebtables rules:
+   - mcast-drop-non-site to prohibit arp traffic except 10.8.0.0/16
+   - mcast-drop-arp to drop arp traffic from/to 0.0.0.0
+   - mcast-allow-cjdns to allow cjdns multicast traffic
+ - Changed default download/upload traffic shaping to 12.000/1.200 kbit/s
+ - Added support for several new devices
+
 ## snapshot~20150303
  - forked to Regensburg in preparation for Infrastructure Split
 

Makefile

@@ -1,9 +1,14 @@
 GLUON_BUILD_DIR := gluon-build
-GLUON_GIT_URL := git://github.com/freifunk-gluon/gluon.git
+GLUON_GIT_URL := https://github.com/freifunk-gluon/gluon.git
-GLUON_GIT_REF := v2014.4
+GLUON_GIT_REF := v2015.1
 
 SECRET_KEY_FILE ?= ${HOME}/.gluon-secret-key
 
+GLUON_TARGETS ?= \
+	ar71xx-generic \
+	ar71xx-nand \
+	x86-kvm_guest
+
 GLUON_RELEASE := $(shell git describe --tags 2>/dev/null)
 ifneq (,$(shell git describe --exact-match --tags 2>/dev/null))
   GLUON_BRANCH := stable
@@ -13,14 +18,14 @@ endif
 
 JOBS ?= $(shell cat /proc/cpuinfo | grep processor | wc -l)
 
+JOBS = 1
+
 GLUON_MAKE := ${MAKE} -j ${JOBS} -C ${GLUON_BUILD_DIR} \
-                      GLUON_RELEASE=${GLUON_RELEASE} \
+			GLUON_RELEASE=${GLUON_RELEASE} \
-                      GLUON_BRANCH=${GLUON_BRANCH}
+			GLUON_BRANCH=${GLUON_BRANCH}
 
 all: info
-	${MAKE} gluon-clean
 	${MAKE} manifest
-	${MAKE} gluon-clean
 
 info:
 	@echo
@@ -30,7 +35,10 @@ info:
 	@echo
 
 build: gluon-prepare
-	${GLUON_MAKE}
+	for target in ${GLUON_TARGETS}; do \
+		echo ""Building target $$target""; \
+		${GLUON_MAKE} GLUON_TARGET="$$target"; \
+	done
 
 manifest: build
 	${GLUON_MAKE} manifest

i18n/de.po

@@ -0,0 +1,37 @@
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: PACKAGE VERSION\n"
+"PO-Revision-Date: 2015-05-16 19:31+0200\n"
+"Last-Translator: Bastian Maeuser <mephisto@mephis.to>\n"
+"Language-Team: German\n"
+"Language: de\n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "gluon-config-mode:welcome"
+msgstr ""
+"Willkommen zum Einrichtungsassistenten für deinen neuen Regensburger "
+"Freifunk-Knoten. Fülle das folgende Formular deinen Vorstellungen "
+"entsprechend aus und sende es ab."
+
+msgid "gluon-config-mode:pubkey"
+msgstr ""
+
+msgid "gluon-config-mode:reboot"
+msgstr ""
+"<p>Dein Knoten startet gerade neu und wird anschließend versuchen, sich "
+"mit anderen Freifunk-Knoten in seiner Nähe zu verbinden. Weitere "
+"Informationen zur Regensburger Freifunk-Community findest du auf "
+"<a href=\"http://regensburg.freifunk.net/\">unserer Webseite</a>. Wenn "
+"alles geklappt hat, wirst du in ein paar Minuten unter "
+"<a href=\"http://regensburg.freifunk.net/meshviewer/\">regensburg.freifunk.net/meshviewer/</a> "
+"deinen Knoten finden.</p> "
+"<p>Um zu dieser Konfigurationsseite zurückzugelangen, drücke im normalen "
+"Betrieb für drei Sekunden den Reset-Button. Das Gerät wird dann im Config "
+"Mode neustarten.</p>"
+"<p>Wenn Du mehr über Freifunk in Regensburg erfahren möchtest, dann besuche "
+"uns doch einfach Montag in der <a href=\"http://www.binary-kitchen.de\">Binary Kitchen</a> "
+"wo meistens jemand von uns jemand zugegen ist, oder im IRC Netz hackint/#freifunkR </p> "
+"<p>Viel Spaß mit deinem Knoten und der Erkundung von Freifunk!</p> "

i18n/en.po

@@ -0,0 +1,30 @@
+msgid ""
+msgstr ""
+"Content-Type: text/plain; charset=UTF-8\n"
+"Project-Id-Version: PACKAGE VERSION\n"
+"PO-Revision-Date: 2015-05-16 19:31+0200\n"
+"Last-Translator: Bastian Maeuser <mephisto@mephis.to>\n"
+"Language-Team: English\n"
+"Language: en\n"
+"MIME-Version: 1.0\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+msgid "gluon-config-mode:welcome"
+msgstr ""
+"Welcome the the setup wizard of your new Freifunk Regensburg node. "
+"Please fill out the following form and transmit it."
+
+msgid "gluon-config-mode:pubkey"
+msgstr ""
+
+msgid "gluon-config-mode:reboot"
+msgstr ""
+"<p>Your node is currently rebooting and will try to connect to other "
+"nearby Freifunk nodes. It should appear on our map at "
+"<a href=\"http://regensburg.freifunk.net/meshviewer/\">regensburg.freifunk.net/meshviewer/</a> "
+"in a few minutes.</p> "
+"<p>To get back to this configuration interface, press the reset button for "
+"3 seconds during normal operation. The device will then reboot into config "
+"mode.</p>"
+"<p>Have fun with your node and exploring the Freifunk network!</p>"

modules

@@ -0,0 +1,3 @@
+GLUON_SITE_FEEDS='ffmuc_packages'
+PACKAGES_FFMUC_PACKAGES_REPO=https://github.com/freifunkMUC/gluon-packages.git
+PACKAGES_FFMUC_PACKAGES_COMMIT=82e721ad5d7c9eca8728954cfa1ab1d5b9168487

site.conf

@@ -1,235 +1,106 @@
---[[	
-	gluon site.conf ffrgb
-
-        This file contains the Munich freifunk site.conf which was adopted from the original freifunk suite used in Luebeck. 
-	There are comments added to most switches to explain the usage of gluon.
-
-	This is lua code now, not perl anymore.
-
-	Happy compiling!
-]]
-
 {
-	--[[	Community settings
+  hostname_prefix = 'freifunk',
-	hostname_prefix:	Nodename prefix
+  site_name = 'Freifunk Regensburg',
-	freifunk-abcdef123456 (hex-part is generated from node's MAC address)
+  site_code = 'ffsad-bat15',
-	site_name:			Name of your community
+  opkg_repo = 'http://openwrt.draic.info/barrier_breaker/14.07/%S/packages',
-	site_code:			Shortcode of your community
-	]]
 
-	hostname_prefix = 'freifunk',
+  prefix4 = '10.90.0.0/16',
-	site_name = 'Freifunk Regensburg',
+  prefix6 = 'fdef:f00f:1337:cafe/64',
-	site_code = 'ffrgb-bat15',
+
-	opkg_repo = 'http://openwrt.draic.info/barrier_breaker/14.07/%S/packages',
+  timezone = 'CET-1CEST,M3.5.0,M10.5.0/3',
+  ntp_servers = {'1.ntp.services.ffrgb','2.ntp.services.ffrgb'},
+
+  mesh_on_wan = true,
+
+  regdom = 'DE',
+
+  wifi24 = {
+    ssid = 'schwandorf.freifunk.net',
+    channel = 1,
+    htmode = 'HT40+',
+    mesh_ssid = 'mesh.ffrgb',
+    mesh_bssid = '02:0E:8E:1E:61:17',
+    mesh_mcast_rate = 12000,
+  },
+
+  wifi5 = {
+    ssid = 'schwandorf.freifunk.net',
+    channel = 44,
+    htmode = 'HT40+',
+    mesh_ssid = 'mesh.ffrgb',
+    mesh_bssid = '02:0E:8E:1E:61:17',
+    mesh_mcast_rate = 12000,
+  },
+
+  next_node = {
+    ip4 = '10.90.0.1',
+    ip6 = 'fdef:f00f:1337:cafe::1',
+    mac = '16:41:95:40:f7:dd',
+  },
 
 
-	--[[	General network settings
+  fastd_mesh_vpn = {
-	prefix4:			IPv4 range of your community
+    methods = {'salsa2012+umac'},
-	prefix6:			IPv6 range of your community
+    mtu = 1426,
-		is also required for radvd  ]]
+    groups = {
-
+      backbone = {
-	prefix4 = '10.90.0.0/16',
+      limit = 2,
-	prefix6 = 'fdef:f00f:1337:cafe/64',
+        peers = {
-
+          gw01 = {   --[[ sven ]]
-
+            key = '58c2ac30c4693e8fde59c3794ac4c09748ec6a969e9688c42e144f5382e16e66',
-	--[[	NTP settings
+            remotes = {
-		Synchronize the time of the nodes
+              'ipv4 "78.47.168.108" port 10000',
-		timezone: Timezone of your community
+            },
-		http://wiki.openwrt.org/doc/uci/system#time.zones
+          },
-		ntp_servers: List of NTP-Servers to query. You can use any public and/or your private NTP-Servers of your community.
+          gw04 = {   --[[ mephisto ]]
-		http://www.pool.ntp.org/zone/de ]]
+            key = '40ebfaf04da006d9150d3d8adeaab0dfa62ca645b416403537cb009bbf2125b5',
-
+            remotes = {
-	timezone = 'CET-1CEST,M3.5.0,M10.5.0/3',
+              'ipv4 "213.166.225.5" port 10000',
-	ntp_servers = {'1.ntp.services.ffrgb','2.ntp.services.ffrgb'},
+            },
-
+          },
-	--[[	Wireless settings
-		regdom: IEEE 802.11 Regulatory Domain
-		http://en.wikipedia.org/wiki/IEEE_802.11#Regulatory_domains_and_legal_compliance
-		wifi24: Wifi settings for 2.4 GHz frequency devices
-		wifi5: Wifi settings for 5 GHz frequency devices
-		sub
-		ssid: Wifi name shown to the user (We recommend %site_code%.freifunk.net)
-		channel: Wifi channel to use
-		htmode:	Specifies the channel width in 802.11n and 802.11ac mode, possible values are:
-						HT20 (single 20MHz channel),
-						HT40- (2x 20MHz channels, primary/control channel is upper, secondary channel is below)
-						HT40+ (2x 20MHz channels, primary/control channel is lower, secondary channel is above).
-						VHT20 / VHT40 / VHT80 / VHT160 (channel width in 802.11ac, extra channels are picked according to the specification)
-		http://wiki.openwrt.org/doc/uci/wireless#common.options (-> htmode)
-		mesh_ssid: SSID of the mesh-interface, an ugly SSID prevent clients from connecting (We recommend not to change this)
-		mesh_bssid: BSSID of the mesh-interface
-		mesh_mcast_rate: multicast rate of the mesh-interface ]]
-
-	regdom = 'DE',
-
-	wifi24 = {
-		ssid = 'schwandorf.freifunk.net',
-		channel = 1,
-		htmode = 'HT40+',
-		mesh_ssid = 'mesh.ffrgb',
-		mesh_bssid = '02:0E:8E:1E:61:17',  --[[ from https://muenchen.freifunk.net/wiki/Knoten#B.A.T.M.A.N._Advanced ]]
-		mesh_mcast_rate = 12000,
-	},
-
-	wifi5 = {
-		ssid = 'schwandorf.freifunk.net',
-		channel = 44,
-		htmode = 'HT40+',
-		mesh_ssid = 'mesh.ffrgb',
-		mesh_bssid = '02:0E:8E:1E:61:17',
-		mesh_mcast_rate = 12000,
-	},
-
-
-	--[[	Next-Node
-		next_node: Howto reach the node you are currently connected to
-		The node will always be reachable at that address, and it's the same on all nodes. Because next_node packets are redirected within the node itself, there will be no conflicts.
-		sub
-		ip4: IPv4 Address to use
-		ip6: IPv6 Address to use
-		mac: MAC Address to use
-		(TODO: What is the purpose of this MAC-Address here?) ]]
-
-	next_node = {
-		 ip4 = '10.90.0.1',
-		 ip6 = 'fdef:f00f:1337:cafe::1',
-		 mac = '16:41:95:40:f7:dd',
-	},
-
-
-	--[[	Gateway settings
-		fastd_mesh_vpn:	fastd vpn settings
-		https://projects.universe-factory.net/projects/fastd/wiki/User_manual
-		sub
-		methods: encryption algorithms to use
-		https://projects.universe-factory.net/projects/fastd/wiki/Methods
-		When multiple method statements are given, the first one has the highest preference.
-		mtu: package size
-		backbone: fastd vpn gateways of your community
-		sub
-		limit: Number of gateways each node connects to
-		On startup, each node tries to connect to every gateway, and then chooses the number of 'limit' fastest gateways it could reach
-		peers: Gateways
-		sub sub
-		key: public fastd key of your gateway
-		https://github.com/tcatm/ecdsautils
-		remotes: List of fastd configuration strings to connect to your gateway server ]]
-
-
-	fastd_mesh_vpn = {
-                methods = {'salsa2012+umac','salsa2012+gmac'},
-                mtu = 1426,
-                backbone = {
-                        limit = 2,
-                        peers = {
-                                 vpn_gw01 = {   --[[ VPN Server von Sven (hetzner) ]]
-                                        key = '58c2ac30c4693e8fde59c3794ac4c09748ec6a969e9688c42e144f5382e16e66',
-                                        remotes = {'ipv4 "78.47.168.108" port 10000'},
-                                        },
-                                 vpn_gw04 = {   --[[ VPN Server von mephisto ]]
-                                        key = '40ebfaf04da006d9150d3d8adeaab0dfa62ca645b416403537cb009bbf2125b5',
-                                        remotes = {'ipv4 "213.166.225.5" port 10000'},
-                                        },
-                                },
-                           },
-                     },
-
-       --[[	gluon autoupdater section 
-		a how-to can be found here: http://gluon.readthedocs.org/en/latest/features/autoupdater.html
-		enable: 0, 1 
-		branch: stable, beta, experimental
-		name: name of the branch
-		mirrors: comma separated ipv6 based mirror-servers to access the firmware image
-		good_signatures: number of at leased good signatures signed by the authors of the firmware
-		pubkeys: public keys of the authors of the firmware image ]]
-
-autoupdater = {
-		enabled = 1,
-		branch = 'stable',
-		branches = {
-			stable = {
-				name = 'stable',
-				mirrors = {
-          'http://[fdef:f00f:1337:cafe::11]/firmware-sad/stable/sysupgrade/',
         },
-				probability = 0.08,
+      },
-				good_signatures = 2,
+    },
-				pubkeys = {
+  },
+
+  autoupdater = {
+    enabled = 1,
+    branch = 'stable',
+    branches = {
+      stable = {
+        name = 'stable',
+        mirrors = {
+          'http://[fdef:f00f:1337:cafe::11]/sad/firmware/stable/sysupgrade/',
+        },
+        probability = 0.1,
+        good_signatures = 1,
+        pubkeys = {
           '4d6b1a8e2ecfdb59469c38c3659916dd6046cd5270ddd31c3319b21c508eaa07', -- mephisto
-	  '130ff01b6c8df0349c977a5c9539775209493bc771b713e5b3e58cc1d7c4145a', -- duff
+          '130ff01b6c8df0349c977a5c9539775209493bc771b713e5b3e58cc1d7c4145a', -- sven
-				},
+        },
-			},
+      },
-			experimental = {
+      experimental = {
         name = 'experimental',
-				mirrors = {
+        mirrors = {
-          'http://[fdef:f00f:1337:cafe::11]/firmware-sad/experimental/sysupgrade/',
+          'http://[fdef:f00f:1337:cafe::11]/sad/firmware/experimental/sysupgrade/',
         },
-				probability = 0.1,
+        probability = 0.5,
-				good_signatures = 1,
+        good_signatures = 1,
-				pubkeys = {
+        pubkeys = {
           '4d6b1a8e2ecfdb59469c38c3659916dd6046cd5270ddd31c3319b21c508eaa07', -- mephisto
-				},
+	  '130ff01b6c8df0349c977a5c9539775209493bc771b713e5b3e58cc1d7c4145a', -- sven
-			},
+        },
-		},
+      },
-	},
+    },
+  },
 
-
+  simple_tc = {
-
+    mesh_vpn = {
-	--[[	Simple TC settings to limit the bandwidth of the vpn-uplink
+      ifname = 'mesh-vpn',
-		mesh_vpn:
+      enabled = false,
-		sub
+      limit_egress = 1200,
-		ifname:		name of the interface/bridge
+      limit_ingress = 12000,
-		enabled:	default-value
+    },
-		limit_egress:	default-value
+  },
-		limit_ingress:	default-value ]]
-
-	simple_tc = {
-		mesh_vpn = {
-			ifname = 'mesh-vpn',
-			enabled = false,
-			limit_egress = 200,
-			limit_ingress = 3000,
-		},
-	},
-
-
-	--[[	Config Mode settings
-		Text shown on local website on node while in config mode (after initial flashing or after a long press and hold on the primary button and reboot). You can use html here.
-		msg_welcome: Welcome message shown at startup
-		msg_pubkey: Instructions for the user how your community handles the key exchange
-		only shown if VPN setting is selected
-		msg_reboot: Message shown when configuration is finished while the node is rebooting.
-
-		Variables
-		Within the text given here you can use variables which are
-		replaced when the respective website is delivered to the user.
-		Variables must be used in the format <%=NAME%>. See msg_pubkey for an example.
-		hostname: hostname of the node
-		pubkey: fastd public key of the node
-		sysconfig.primary_mac	the primary mac of the node, also found printed beneath the device
-		... other sysconfig.* variables: config_ifname, lan_ifname, wan_ifname ]]
-
-
-	config_mode = {
-		msg_welcome = [[
-Willkommen zum Einrichtungsassistenten für deinen neuen Regensburger
-Freifunk-Knoten. Fülle das folgende Formular deinen Vorstellungen
-entsprechend aus und sende es ab.
-]],
-		msg_pubkey = [[
-]],
-		msg_reboot = [[
-<p>
-Dein Knoten startet gerade neu und wird anschließend versuchen,
-sich mit anderen Freifunk-Knoten in seiner Nähe zu
-verbinden. Weitere Informationen zur
-Regensburger Freifunk-Community findest du auf
-<a href="http://regensburg.freifunk.net/">unserer Webseite</a>.
-</p>
-<p>
-Viel Spaß mit deinem Knoten und der Erkundung von Freifunk!
-</p>
-]],
-	},
 }
 -- vim: set ft=lua:ts=2:sw=2:et

site.mk

@@ -3,6 +3,7 @@ GLUON_SITE_PACKAGES := \
 	gluon-alfred \
 	gluon-announced \
 	gluon-autoupdater \
+	gluon-config-mode-core \
 	gluon-config-mode-autoupdater \
 	gluon-config-mode-hostname \
 	gluon-config-mode-mesh-vpn \
@@ -13,14 +14,18 @@ GLUON_SITE_PACKAGES := \
 	gluon-luci-admin \
 	gluon-luci-autoupdater \
 	gluon-luci-portconfig \
+	gluon-luci-wifi-config \
 	gluon-luci-private-wifi \
 	gluon-next-node \
 	gluon-mesh-vpn-fastd \
 	gluon-radvd \
+	gluon-setup-mode \
 	gluon-status-page \
 	iwinfo \
 	iptables \
-	haveged
+	haveged \
+	gluon-ebtables-filter-arp-ffmuc \
+	gluon-ebtables-filter-multicast-ffmuc
 
 
 DEFAULT_GLUON_RELEASE := snapshot~$(shell date '+%Y%m%d')
@@ -29,3 +34,6 @@ DEFAULT_GLUON_RELEASE := snapshot~$(shell date '+%Y%m%d')
 GLUON_RELEASE ?= $(DEFAULT_GLUON_RELEASE)
 
 GLUON_PRIORITY ?= 0
+
+# Languages to include
+GLUON_LANGS ?= en de