Firmware/Marlin/language_it.h

356 lines
20 KiB
C
Raw Normal View History

/**
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Italian
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_IT_H
#define LANGUAGE_IT_H
#define DISPLAY_CHARSET_ISO10646_1
2016-12-12 16:18:53 +01:00
#define WELCOME_MSG MACHINE_NAME _UxGT(" pronto.")
2017-04-28 20:49:16 +02:00
#define MSG_BACK _UxGT("Indietro")
2016-12-12 16:18:53 +01:00
#define MSG_SD_INSERTED _UxGT("SD Card inserita")
#define MSG_SD_REMOVED _UxGT("SD Card rimossa")
#define MSG_LCD_ENDSTOPS _UxGT("Endstop")
#define MSG_MAIN _UxGT("Menu principale")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Disabilita Motori")
2017-04-28 20:49:16 +02:00
#define MSG_DEBUG_MENU _UxGT("Menu di debug")
#define MSG_PROGRESS_BAR_TEST _UxGT("Test barra avanzamento")
2016-12-12 16:18:53 +01:00
#define MSG_AUTO_HOME _UxGT("Auto Home")
#define MSG_AUTO_HOME_X _UxGT("Home asse X")
#define MSG_AUTO_HOME_Y _UxGT("Home asse Y")
#define MSG_AUTO_HOME_Z _UxGT("Home asse Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Home assi XYZ")
#define MSG_LEVEL_BED_WAITING _UxGT("Premi per iniziare")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Punto successivo")
#define MSG_LEVEL_BED_DONE _UxGT("Livel. terminato!")
#define MSG_SET_HOME_OFFSETS _UxGT("Imp. offset home")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offset applicato")
#define MSG_SET_ORIGIN _UxGT("Imposta Origine")
#define MSG_PREHEAT_1 _UxGT("Preriscalda PLA")
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tutto")
2017-06-10 21:50:14 +02:00
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Ugello")
2016-12-12 16:18:53 +01:00
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Piatto")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf")
#define MSG_PREHEAT_2 _UxGT("Preriscalda ABS")
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tutto")
2017-06-10 21:50:14 +02:00
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Ugello")
2016-12-12 16:18:53 +01:00
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Piatto")
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" conf")
#define MSG_COOLDOWN _UxGT("Raffredda")
#define MSG_SWITCH_PS_ON _UxGT("Accendi aliment.")
#define MSG_SWITCH_PS_OFF _UxGT("Spegni aliment.")
#define MSG_EXTRUDE _UxGT("Estrudi")
#define MSG_RETRACT _UxGT("Ritrai")
#define MSG_MOVE_AXIS _UxGT("Muovi Asse")
#define MSG_BED_LEVELING _UxGT("Livella piano")
2016-12-12 16:18:53 +01:00
#define MSG_LEVEL_BED _UxGT("Livella piano")
2017-06-11 10:37:34 +02:00
#define MSG_EDITING_STOPPED _UxGT("Modifica Mesh Fermata")
#define MSG_USER_MENU _UxGT("Comandi Utente")
#define MSG_UBL_DOING_G29 _UxGT("G29 in corso")
#define MSG_UBL_UNHOMED _UxGT("Home XYZ prima")
#define MSG_UBL_TOOLS _UxGT("Strumenti UBL")
#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
#define MSG_UBL_MANUAL_MESH _UxGT("Mesh Manuale")
#define MSG_UBL_BC_INSERT _UxGT("Metti spessore & misura")
#define MSG_UBL_BC_INSERT2 _UxGT("Misura")
#define MSG_UBL_BC_REMOVE _UxGT("Rimuovi & misura piatto")
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Spostamento sucessivo")
#define MSG_UBL_ACTIVATE_MESH _UxGT("Attiva UBL")
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Disattiva UBL")
#define MSG_UBL_SET_BED_TEMP _UxGT("Temp Piatto")
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp Ugello")
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Modif Custom Mesh")
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Ritocca Mesh")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh")
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Crea Custom Mesh")
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Crea Mesh")
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Crea PLA Mesh")
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Crea ABS Mesh")
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Crea Cold Mesh")
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Aggiusta Altezza Mesh")
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Altezza")
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valida Mesh")
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Valida PLA Mesh")
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Valida ABS Mesh")
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valida Custom Mesh")
#define MSG_UBL_CONTINUE_MESH _UxGT("Continua Mesh")
#define MSG_UBL_MESH_LEVELING _UxGT("Livell. Mesh")
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Livell. 3 Punti")
#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Livell. Griglia Mesh")
#define MSG_UBL_MESH_LEVEL _UxGT("Livella Mesh")
#define MSG_UBL_SIDE_POINTS _UxGT("Punti laterali")
#define MSG_UBL_MAP_TYPE _UxGT("Tipo di Mappa")
#define MSG_UBL_OUTPUT_MAP _UxGT("Esporta Mappa")
#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Esporta per Host")
#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Esporta in CSV")
#define MSG_UBL_INFO_UBL _UxGT("Esporta Info UBL")
#define MSG_UBL_EDIT_MESH_MENU _UxGT("Modifica Mesh")
#define MSG_UBL_FILLIN_AMOUNT _UxGT("Riempimento")
#define MSG_UBL_MANUAL_FILLIN _UxGT("Riempimento Manuale")
#define MSG_UBL_SMART_FILLIN _UxGT("Riempimento Smart")
#define MSG_UBL_FILLIN_MESH _UxGT("Riempimento Mesh")
#define MSG_UBL_INVALIDATE_ALL _UxGT("Invalida Tutto")
#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Invalida Punto Vicino")
#define MSG_UBL_FINE_TUNE_ALL _UxGT("Ritocca All")
#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Ritocca Punto Vicino")
#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Mesh Salvate")
#define MSG_UBL_STORAGE_SLOT _UxGT("Slot di memoria")
#define MSG_UBL_LOAD_MESH _UxGT("Carica Mesh Piatto")
#define MSG_UBL_SAVE_MESH _UxGT("Salva Mesh Piatto")
#define MSG_UBL_SAVE_ERROR _UxGT("Err: Salvataggio UBL")
#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ripristino UBL")
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Fermato")
2017-04-28 20:49:16 +02:00
#define MSG_MOVING _UxGT("In movimento...")
#define MSG_FREE_XY _UxGT("XY liberi")
2016-12-12 16:18:53 +01:00
#define MSG_MOVE_X _UxGT("Muovi X")
#define MSG_MOVE_Y _UxGT("Muovi Y")
#define MSG_MOVE_Z _UxGT("Muovi Z")
#define MSG_MOVE_E _UxGT("Estrusore")
#define MSG_MOVE_01MM _UxGT("Muovi di 0.1mm")
#define MSG_MOVE_1MM _UxGT("Muovi di 1mm")
#define MSG_MOVE_10MM _UxGT("Muovi di 10mm")
#if ENABLED(DOGLCD)
2016-12-12 16:18:53 +01:00
#define MSG_SPEED _UxGT("Velocità")
#else
2016-12-12 16:18:53 +01:00
#define MSG_SPEED _UxGT("Velocita")
#endif
2016-12-12 16:18:53 +01:00
#define MSG_BED_Z _UxGT("piatto Z")
#define MSG_NOZZLE _UxGT("Ugello")
#define MSG_BED _UxGT("Piatto")
#if ENABLED(DOGLCD)
2016-12-12 16:18:53 +01:00
#define MSG_FAN_SPEED _UxGT("Velocità ventola")
#else
2016-12-12 16:18:53 +01:00
#define MSG_FAN_SPEED _UxGT("Velocita ventola")
#endif
2016-12-12 16:18:53 +01:00
#define MSG_FLOW _UxGT("Flusso")
#define MSG_CONTROL _UxGT("Controllo")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Fact")
#define MSG_AUTOTEMP _UxGT("Autotemp")
#define MSG_ON _UxGT("On ")
#define MSG_OFF _UxGT("Off")
#define MSG_PID_P _UxGT("PID-P")
#define MSG_PID_I _UxGT("PID-I")
#define MSG_PID_D _UxGT("PID-D")
#define MSG_PID_C _UxGT("PID-C")
#define MSG_SELECT _UxGT("Seleziona")
#define MSG_ACC _UxGT("Accel")
2017-05-28 19:13:27 +02:00
#define MSG_JERK _UxGT("Jerk")
2016-12-12 16:18:53 +01:00
#define MSG_VX_JERK _UxGT("Vx-jerk")
#define MSG_VY_JERK _UxGT("Vy-jerk")
#define MSG_VZ_JERK _UxGT("Vz-jerk")
#define MSG_VE_JERK _UxGT("Ve-jerk")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
#define MSG_VTRAV_MIN _UxGT("VTrav min")
#define MSG_AMAX _UxGT("Amax ")
#define MSG_A_RETRACT _UxGT("A-retract")
#define MSG_A_TRAVEL _UxGT("A-Spostamento")
2017-05-28 19:13:27 +02:00
#define MSG_STEPS_PER_MM _UxGT("Passi/mm")
2016-12-12 16:18:53 +01:00
#define MSG_XSTEPS _UxGT("Xpassi/mm")
#define MSG_YSTEPS _UxGT("Ypassi/mm")
#define MSG_ZSTEPS _UxGT("Zpassi/mm")
#define MSG_ESTEPS _UxGT("Epassi/mm")
#define MSG_E1STEPS _UxGT("E1passi/mm")
#define MSG_E2STEPS _UxGT("E2passi/mm")
#define MSG_E3STEPS _UxGT("E3passi/mm")
#define MSG_E4STEPS _UxGT("E4passi/mm")
2017-04-09 10:23:05 +02:00
#define MSG_E5STEPS _UxGT("E5passi/mm")
2016-12-12 16:18:53 +01:00
#define MSG_TEMPERATURE _UxGT("Temperatura")
#define MSG_MOTION _UxGT("Movimento")
2017-04-17 06:00:08 +02:00
#define MSG_FILAMENT _UxGT("Filamento")
2016-12-12 16:18:53 +01:00
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Diam. filo")
2017-06-10 21:50:14 +02:00
#define MSG_ADVANCE_K _UxGT("K Avanzamento")
2016-12-12 16:18:53 +01:00
#define MSG_CONTRAST _UxGT("Contrasto LCD")
#define MSG_STORE_EEPROM _UxGT("Salva in memoria")
#define MSG_LOAD_EEPROM _UxGT("Carica da memoria")
2016-12-12 16:18:53 +01:00
#define MSG_RESTORE_FAILSAFE _UxGT("Ripristina imp.")
#define MSG_REFRESH _UxGT("Aggiorna")
#define MSG_WATCH _UxGT("Guarda")
#define MSG_PREPARE _UxGT("Prepara")
#define MSG_TUNE _UxGT("Regola")
#define MSG_PAUSE_PRINT _UxGT("Pausa")
#define MSG_RESUME_PRINT _UxGT("Riprendi stampa")
#define MSG_STOP_PRINT _UxGT("Arresta stampa")
#define MSG_CARD_MENU _UxGT("Stampa da SD")
#define MSG_NO_CARD _UxGT("SD non presente")
#define MSG_DWELL _UxGT("Sospensione...")
2017-06-10 21:50:14 +02:00
#define MSG_USERWAIT _UxGT("Premi tasto..")
2016-12-12 16:18:53 +01:00
#define MSG_RESUMING _UxGT("Riprendi Stampa")
#define MSG_PRINT_ABORTED _UxGT("Stampa annullata")
#define MSG_NO_MOVE _UxGT("Nessun Movimento")
#define MSG_KILLED _UxGT("UCCISO. ")
#define MSG_STOPPED _UxGT("ARRESTATO. ")
#define MSG_CONTROL_RETRACT _UxGT("Ritrai mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Scamb. Ritrai mm")
#define MSG_CONTROL_RETRACTF _UxGT("Ritrai V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Salta mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Scamb. UnRet mm")
2016-12-12 16:18:53 +01:00
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
#define MSG_AUTORETRACT _UxGT("AutoRitrai")
#define MSG_FILAMENTCHANGE _UxGT("Cambia filamento")
#define MSG_INIT_SDCARD _UxGT("Iniz. SD-Card")
#define MSG_CNG_SDCARD _UxGT("Cambia SD-Card")
#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed")
#define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch")
#define MSG_BLTOUCH_RESET _UxGT("Resetta BLTouch")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("prima")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Finecorsa abort")
#define MSG_HEATING_FAILED_LCD _UxGT("Riscald. Fallito")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP RIDONDANTI")
#define MSG_THERMAL_RUNAWAY _UxGT("TEMP FUORI CONTROLLO")
#define MSG_ERR_MAXTEMP _UxGT("Err: TEMP MASSIMA")
#define MSG_ERR_MINTEMP _UxGT("Err: TEMP MINIMA")
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: TEMP MASSIMA PIATTO")
#define MSG_ERR_MINTEMP_BED _UxGT("Err: TEMP MINIMA PIATTO")
#define MSG_ERR_Z_HOMING _UxGT("G28 Z Vietato")
#define MSG_HALTED _UxGT("STAMPANTE FERMATA")
#define MSG_PLEASE_RESET _UxGT("Riavviare prego")
#define MSG_SHORT_DAY _UxGT("g") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Riscaldamento..")
#define MSG_HEATING_COMPLETE _UxGT("Risc. completato")
#define MSG_BED_HEATING _UxGT("Risc. Piatto..")
#define MSG_BED_DONE _UxGT("Piatto Pronto")
#define MSG_DELTA_CALIBRATE _UxGT("Calibraz. Delta")
#define MSG_DELTA_CALIBRATE_X _UxGT("Calibra X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibra Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibra Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibra Center")
2017-04-28 20:49:16 +02:00
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto calibrazione")
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Imp. altezza Delta")
2016-12-12 16:18:53 +01:00
#define MSG_INFO_MENU _UxGT("Riguardo stampante")
#define MSG_INFO_PRINTER_MENU _UxGT("Info. stampante")
2017-06-11 10:37:34 +02:00
#define MSG_3POINT_LEVELING _UxGT("Livel. a 3 punti")
#define MSG_LINEAR_LEVELING _UxGT("Livel. Lineare")
#define MSG_BILINEAR_LEVELING _UxGT("Livel. Biliniare")
#define MSG_UBL_LEVELING _UxGT("Livel. UBL")
#define MSG_MESH_LEVELING _UxGT("Livel. Mesh")
2016-12-12 16:18:53 +01:00
#define MSG_INFO_STATS_MENU _UxGT("Statistiche")
#define MSG_INFO_BOARD_MENU _UxGT("Info. scheda")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Termistori")
#define MSG_INFO_EXTRUDERS _UxGT("Estrusori")
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protocollo")
2017-05-26 03:55:00 +02:00
#define MSG_CASE_LIGHT _UxGT("Luci Case")
2017-06-11 10:37:34 +02:00
#if ENABLED(DOGLCD)
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Luminosità Luci")
#else
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Luminosita Luci")
#endif
2017-05-26 03:55:00 +02:00
2016-11-18 05:17:14 +01:00
#if LCD_WIDTH >= 20
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_COUNT _UxGT("Contat. stampa")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completati")
#define MSG_INFO_PRINT_TIME _UxGT("Tempo totale")
#if ENABLED(DOGLCD)
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_LONGEST _UxGT("Lavoro più lungo")
#else
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_LONGEST _UxGT("Lavoro piu lungo")
#endif
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_FILAMENT _UxGT("Totale estruso")
2016-07-14 18:19:13 +02:00
#else
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_COUNT _UxGT("Stampe")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completati")
#define MSG_INFO_PRINT_TIME _UxGT("Durata")
#if ENABLED(DOGLCD)
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_LONGEST _UxGT("Più lungo")
#else
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_LONGEST _UxGT("Piu lungo")
#endif
2016-12-12 16:18:53 +01:00
#define MSG_INFO_PRINT_FILAMENT _UxGT("Estruso")
2016-07-14 18:19:13 +02:00
#endif
2016-12-12 16:18:53 +01:00
#define MSG_INFO_MIN_TEMP _UxGT("Temp min")
#define MSG_INFO_MAX_TEMP _UxGT("Temp max")
#define MSG_INFO_PSU _UxGT("Alimentatore")
2016-07-14 18:19:13 +02:00
2016-12-12 16:18:53 +01:00
#define MSG_DRIVE_STRENGTH _UxGT("Potenza Drive")
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Scrivi DAC EEPROM")
2017-06-11 10:37:34 +02:00
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("STAMPA IN PAUSA")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPZIONI:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Estrudi ancora")
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Riprendi stampa")
2017-04-28 20:49:16 +02:00
#if ENABLED(DOGLCD)
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Temp minima è ")
#else
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Temp minima e ")
#endif
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Ugello: ")
2016-07-14 18:19:13 +02:00
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere avvio")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("del cambio")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("di filamento")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("l'espulsione")
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("del filamento")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci il")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("filamento e")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("premi per cont")
2017-04-28 20:49:16 +02:00
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Premi per")
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("riscald ugello.")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Riscald. ugello")
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Attendere...")
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("il caricamento")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("del filamento")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("l'estrusione")
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("del filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("la ripresa")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("della stampa")
2016-07-14 18:19:13 +02:00
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Espulsione...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci e premi")
2017-04-28 20:49:16 +02:00
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Riscaldamento...")
2016-12-12 16:18:53 +01:00
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Caricamento...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Estrusione...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Ripresa...")
2016-07-14 18:19:13 +02:00
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_IT_H