Firmware/Marlin/ultralcd.pde

1551 lines
36 KiB
Plaintext
Raw Normal View History

#include "ultralcd.h"
#ifdef ULTRA_LCD
extern volatile int feedmultiply;
extern volatile bool feedmultiplychanged;
extern long position[4];
extern CardReader card;
static char messagetext[LCD_WIDTH]="";
#include <LiquidCrystal.h>
LiquidCrystal lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
static unsigned long previous_millis_lcd=0;
static long previous_millis_buttons=0;
inline int intround(const float &x){return int(0.5+x);}
volatile char buttons=0; //the last checked buttons in a bit array.
int encoderpos=0;
short lastenc=0;
#ifdef NEWPANEL
static long blocking=0;
#else
static long blocking[8]={0,0,0,0,0,0,0,0};
#endif
MainMenu menu;
void lcd_status(const char* message)
{
strncpy(messagetext,message,LCD_WIDTH);
}
inline void clear()
{
lcd.clear();
}
void lcd_init()
{
//beep();
byte Degree[8] =
{
B01100,
B10010,
B10010,
B01100,
B00000,
B00000,
B00000,
B00000
};
byte Thermometer[8] =
{
B00100,
B01010,
B01010,
B01010,
B01010,
B10001,
B10001,
B01110
};
byte uplevel[8]={0x04, 0x0e, 0x1f, 0x04, 0x1c, 0x00, 0x00, 0x00};//thanks joris
byte refresh[8]={0x00, 0x06, 0x19, 0x18, 0x03, 0x13, 0x0c, 0x00}; //thanks joris
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
lcd.createChar(1,Degree);
lcd.createChar(2,Thermometer);
lcd.createChar(3,uplevel);
lcd.createChar(4,refresh);
LCD_MESSAGE(fillto(LCD_WIDTH,"UltiMarlin ready."));
}
void beep()
{
//return;
#ifdef ULTIPANEL
pinMode(BEEPER,OUTPUT);
for(int8_t i=0;i<20;i++){
WRITE(BEEPER,HIGH);
delay(5);
WRITE(BEEPER,LOW);
delay(5);
}
#endif
}
void beepshort()
{
//return;
#ifdef ULTIPANEL
pinMode(BEEPER,OUTPUT);
for(int8_t i=0;i<10;i++){
WRITE(BEEPER,HIGH);
delay(3);
WRITE(BEEPER,LOW);
delay(3);
}
#endif
}
void lcd_status()
{
#ifdef ULTIPANEL
static uint8_t oldbuttons=0;
static long previous_millis_buttons=0;
static long previous_lcdinit=0;
// buttons_check(); // Done in temperature interrupt
//previous_millis_buttons=millis();
if((buttons==oldbuttons) && ((millis() - previous_millis_lcd) < LCD_UPDATE_INTERVAL) )
return;
oldbuttons=buttons;
#else
if(((millis() - previous_millis_lcd) < LCD_UPDATE_INTERVAL) )
return;
#endif
previous_millis_lcd=millis();
menu.update();
}
#ifdef ULTIPANEL
void buttons_init()
{
#ifdef NEWPANEL
pinMode(BTN_EN1,INPUT);
pinMode(BTN_EN2,INPUT);
pinMode(BTN_ENC,INPUT);
pinMode(SDCARDDETECT,INPUT);
WRITE(BTN_EN1,HIGH);
WRITE(BTN_EN2,HIGH);
WRITE(BTN_ENC,HIGH);
WRITE(SDCARDDETECT,HIGH);
#else
pinMode(SHIFT_CLK,OUTPUT);
pinMode(SHIFT_LD,OUTPUT);
pinMode(SHIFT_EN,OUTPUT);
pinMode(SHIFT_OUT,INPUT);
WRITE(SHIFT_OUT,HIGH);
WRITE(SHIFT_LD,HIGH);
WRITE(SHIFT_EN,LOW);
#endif
}
void buttons_check()
{
#ifdef NEWPANEL
uint8_t newbutton=0;
if(READ(BTN_EN1)==0) newbutton|=EN_A;
if(READ(BTN_EN2)==0) newbutton|=EN_B;
if((blocking<millis()) &&(READ(BTN_ENC)==0))
newbutton|=EN_C;
buttons=newbutton;
#else //read it from the shift register
uint8_t newbutton=0;
WRITE(SHIFT_LD,LOW);
WRITE(SHIFT_LD,HIGH);
unsigned char tmp_buttons=0;
for(int8_t i=0;i<8;i++)
{
newbutton = newbutton>>1;
if(READ(SHIFT_OUT))
newbutton|=(1<<7);
WRITE(SHIFT_CLK,HIGH);
WRITE(SHIFT_CLK,LOW);
}
buttons=~newbutton; //invert it, because a pressed switch produces a logical 0
#endif
char enc=0;
if(buttons&EN_A)
enc|=(1<<0);
if(buttons&EN_B)
enc|=(1<<1);
if(enc!=lastenc)
{
switch(enc)
{
case encrot0:
if(lastenc==encrot3)
encoderpos++;
else if(lastenc==encrot1)
encoderpos--;
break;
case encrot1:
if(lastenc==encrot0)
encoderpos++;
else if(lastenc==encrot2)
encoderpos--;
break;
case encrot2:
if(lastenc==encrot1)
encoderpos++;
else if(lastenc==encrot3)
encoderpos--;
break;
case encrot3:
if(lastenc==encrot2)
encoderpos++;
else if(lastenc==encrot0)
encoderpos--;
break;
default:
;
}
}
lastenc=enc;
}
#endif
MainMenu::MainMenu()
{
status=Main_Status;
displayStartingRow=0;
activeline=0;
force_lcd_update=true;
#ifdef ULTIPANEL
buttons_init();
#endif
lcd_init();
linechanging=false;
}
void MainMenu::showStatus()
{
#if LCD_HEIGHT==4
static int olddegHotEnd0=-1;
static int oldtargetHotEnd0=-1;
//force_lcd_update=true;
if(force_lcd_update||feedmultiplychanged) //initial display of content
{
feedmultiplychanged=false;
encoderpos=feedmultiply;
clear();
lcd.setCursor(0,0);lcd.print("\002123/567\001 ");
#if defined BED_USES_THERMISTOR || defined BED_USES_AD595
lcd.setCursor(10,0);lcd.print("B123/567\001 ");
#endif
}
int tHotEnd0=intround(degHotend0());
if((abs(tHotEnd0-olddegHotEnd0)>1)||force_lcd_update) //>1 because otherwise the lcd is refreshed to often.
{
lcd.setCursor(1,0);
lcd.print(ftostr3(tHotEnd0));
olddegHotEnd0=tHotEnd0;
}
int ttHotEnd0=intround(degTargetHotend0());
if((ttHotEnd0!=oldtargetHotEnd0)||force_lcd_update)
{
lcd.setCursor(5,0);
lcd.print(ftostr3(ttHotEnd0));
oldtargetHotEnd0=ttHotEnd0;
}
#if defined BED_USES_THERMISTOR || defined BED_USES_AD595
static int oldtBed=-1;
static int oldtargetBed=-1;
int tBed=intround(degBed());
if((tBed!=oldtBed)||force_lcd_update)
{
lcd.setCursor(1,0);
lcd.print(ftostr3(tBed));
olddegHotEnd0=tBed;
}
int targetBed=intround(degTargetBed());
if((targetBed!=oldtargetBed)||force_lcd_update)
{
lcd.setCursor(5,0);
lcd.print(ftostr3(targetBed));
oldtargetBed=targetBed;
}
#endif
//starttime=2;
static uint16_t oldtime=0;
if(starttime!=0)
{
lcd.setCursor(0,1);
uint16_t time=millis()/60000-starttime/60000;
if(starttime!=oldtime)
{
lcd.print(itostr2(time/60));lcd.print("h ");lcd.print(itostr2(time%60));lcd.print("m");
oldtime=time;
}
}
static int oldzpos=0;
int currentz=current_position[2]*10;
if((currentz!=oldzpos)||force_lcd_update)
{
lcd.setCursor(10,1);
lcd.print("Z:");lcd.print(itostr31(currentz));
oldzpos=currentz;
}
static int oldfeedmultiply=0;
int curfeedmultiply=feedmultiply;
if(encoderpos!=curfeedmultiply||force_lcd_update)
{
curfeedmultiply=encoderpos;
if(curfeedmultiply<10)
curfeedmultiply=10;
if(curfeedmultiply>999)
curfeedmultiply=999;
feedmultiply=curfeedmultiply;
encoderpos=curfeedmultiply;
}
if((curfeedmultiply!=oldfeedmultiply)||force_lcd_update)
{
oldfeedmultiply=curfeedmultiply;
lcd.setCursor(0,2);
lcd.print(itostr3(curfeedmultiply));lcd.print("% ");
}
if(messagetext[0]!='\0')
{
lcd.setCursor(0,LCD_HEIGHT-1);
lcd.print(fillto(LCD_WIDTH,messagetext));
messagetext[0]='\0';
}
#else //smaller LCDS----------------------------------
static int olddegHotEnd0=-1;
static int oldtargetHotEnd0=-1;
if(force_lcd_update) //initial display of content
{
encoderpos=feedmultiply;
lcd.setCursor(0,0);lcd.print("\002123/567\001 ");
#if defined BED_USES_THERMISTOR || defined BED_USES_AD595
lcd.setCursor(10,0);lcd.print("B123/567\001 ");
#endif
}
int tHotEnd0=intround(degHotend0());
int ttHotEnd0=intround(degTargetHotend0());
if((abs(tHotEnd0-olddegHotEnd0)>1)||force_lcd_update)
{
lcd.setCursor(1,0);
lcd.print(ftostr3(tHotEnd0));
olddegHotEnd0=tHotEnd0;
}
if((ttHotEnd0!=oldtargetHotEnd0)||force_lcd_update)
{
lcd.setCursor(5,0);
lcd.print(ftostr3(ttHotEnd0));
oldtargetHotEnd0=ttHotEnd0;
}
if(messagetext[0]!='\0')
{
lcd.setCursor(0,LCD_HEIGHT-1);
lcd.print(fillto(LCD_WIDTH,messagetext));
messagetext[0]='\0';
}
#endif
}
enum {ItemP_exit, ItemP_home, ItemP_origin, ItemP_preheat, ItemP_extrude, ItemP_disstep};
void MainMenu::showPrepare()
{
uint8_t line=0;
if(lastlineoffset!=lineoffset)
{
force_lcd_update=true;
clear();
}
for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
{
//Serial.println((int)(line-lineoffset));
switch(i)
{
case ItemP_exit:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Prepare");
}
if((activeline==line) && CLICKED)
{
BLOCK
status=Main_Menu;
beepshort();
}
}break;
case ItemP_home:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Auto Home");
}
if((activeline==line) && CLICKED)
{
BLOCK
enquecommand("G28 X-105 Y-105 Z0");
beepshort();
}
}break;
case ItemP_origin:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Set Origin");
}
if((activeline==line) && CLICKED)
{
BLOCK
enquecommand("G92 X0 Y0 Z0");
beepshort();
}
}break;
case ItemP_preheat:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Preheat");
}
if((activeline==line) && CLICKED)
{
BLOCK
setTargetHotend0(170);
beepshort();
}
}break;
case ItemP_extrude:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Extrude");
}
if((activeline==line) && CLICKED)
{
BLOCK
enquecommand("G92 E0");
enquecommand("G1 F700 E50");
beepshort();
}
}break;
case ItemP_disstep:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Disable Steppers");
}
if((activeline==line) && CLICKED)
{
BLOCK
enquecommand("M84");
beepshort();
}
}break;
default:
break;
}
line++;
}
lastlineoffset=lineoffset;
if((encoderpos/lcdslow!=lastencoderpos/lcdslow)||force_lcd_update)
{
lcd.setCursor(0,activeline);lcd.print((activeline+lineoffset)?' ':' ');
if(encoderpos<0)
{
lineoffset--;
if(lineoffset<0)
lineoffset=0;
encoderpos=0;
force_lcd_update=true;
}
if(encoderpos/lcdslow>3)
{
lineoffset++;
encoderpos=3*lcdslow;
if(lineoffset>(ItemP_disstep+1-LCD_HEIGHT))
lineoffset=ItemP_disstep+1-LCD_HEIGHT;
force_lcd_update=true;
}
//encoderpos=encoderpos%LCD_HEIGHT;
lastencoderpos=encoderpos;
activeline=encoderpos/lcdslow;
lcd.setCursor(0,activeline);lcd.print((activeline+lineoffset)?'>':'\003');
}
}
enum {
ItemC_exit, ItemC_nozzle,
ItemC_PID_P,ItemC_PID_I,ItemC_PID_D,ItemC_PID_C,
ItemC_fan,
ItemC_acc, ItemC_xyjerk,
ItemC_vmaxx, ItemC_vmaxy, ItemC_vmaxz, ItemC_vmaxe,
ItemC_vtravmin,ItemC_vmin,
ItemC_amaxx, ItemC_amaxy, ItemC_amaxz, ItemC_amaxe,
ItemC_aret,ItemC_esteps, ItemC_store, ItemC_load,ItemC_failsafe
};
void MainMenu::showControl()
{
uint8_t line=0;
if((lastlineoffset!=lineoffset)||force_lcd_update)
{
force_lcd_update=true;
clear();
}
for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
{
switch(i)
{
case ItemC_exit:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Control");
}
if((activeline==line) && CLICKED)
{
BLOCK
status=Main_Menu;
beepshort();
}
}break;
case ItemC_nozzle:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" \002Nozzle:");
lcd.setCursor(13,line);lcd.print(ftostr3(intround(degHotend0())));
}
if((activeline==line) )
{
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=intround(degHotend0());
}
else
{
setTargetHotend0(encoderpos);
encoderpos=activeline*lcdslow;
beepshort();
}
BLOCK;
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>260) encoderpos=260;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
}
}break;
case ItemC_fan:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Fan speed:");
lcd.setCursor(13,line);lcd.print(ftostr3(fanpwm));
}
if((activeline==line) )
{
if(CLICKED) //nalogWrite(FAN_PIN, fanpwm);
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=fanpwm;
}
else
{
fanpwm = constrain(encoderpos,0,255);
encoderpos=fanpwm;
analogWrite(FAN_PIN, fanpwm);
beepshort();
}
BLOCK;
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>255) encoderpos=255;
fanpwm=encoderpos;
analogWrite(FAN_PIN, fanpwm);
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
}
}break;
case ItemC_acc:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Acc:");
lcd.setCursor(13,line);lcd.print(itostr3(acceleration/100));lcd.print("00");
}
if((activeline==line) )
{
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)acceleration/100;
}
else
{
acceleration= encoderpos*100;
encoderpos=activeline*lcdslow;
}
BLOCK;
beepshort();
}
if(linechanging)
{
if(encoderpos<5) encoderpos=5;
if(encoderpos>990) encoderpos=990;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcd.print("00");
}
}
}break;
case ItemC_xyjerk: //max_xy_jerk
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Vxy-jerk: ");
lcd.setCursor(13,line);lcd.print(itostr3(max_xy_jerk/60));
}
if((activeline==line) )
{
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)max_xy_jerk/60;
}
else
{
max_xy_jerk= encoderpos*60;
encoderpos=activeline*lcdslow;
}
BLOCK;
beepshort();
}
if(linechanging)
{
if(encoderpos<1) encoderpos=1;
if(encoderpos>990) encoderpos=990;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
}
}break;
case ItemC_PID_P:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" PID-P: ");
lcd.setCursor(13,line);lcd.print(itostr4(Kp));
}
if((activeline==line) )
{
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)Kp/5;
}
else
{
Kp= encoderpos*5;
encoderpos=activeline*lcdslow;
}
BLOCK;
beepshort();
}
if(linechanging)
{
if(encoderpos<1) encoderpos=1;
if(encoderpos>9990/5) encoderpos=9990/5;
lcd.setCursor(13,line);lcd.print(itostr4(encoderpos*5));
}
}
}break;
case ItemC_PID_I:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" PID-I: ");
lcd.setCursor(13,line);lcd.print(ftostr51(Ki));
}
if((activeline==line) )
{
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)(Ki*10);
}
else
{
Ki= encoderpos/10.;
encoderpos=activeline*lcdslow;
}
BLOCK;
beepshort();
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>9990) encoderpos=9990;
lcd.setCursor(13,line);lcd.print(ftostr51(encoderpos/10.));
}
}
}break;
case ItemC_PID_D:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" PID-D: ");
lcd.setCursor(13,line);lcd.print(itostr4(Kd));
}
if((activeline==line) )
{
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)Kd/5;
}
else
{
Kd= encoderpos*5;
encoderpos=activeline*lcdslow;
}
BLOCK;
beepshort();
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>9990/5) encoderpos=9990/5;
lcd.setCursor(13,line);lcd.print(itostr4(encoderpos*5));
}
}
}break;
case ItemC_PID_C:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" PID-C: ");
lcd.setCursor(13,line);lcd.print(itostr3(Kc));
}
if((activeline==line) )
{
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)Kc;
}
else
{
Kc= encoderpos;
encoderpos=activeline*lcdslow;
}
BLOCK;
beepshort();
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>990) encoderpos=990;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
}
}break;
case ItemC_vmaxx:
case ItemC_vmaxy:
case ItemC_vmaxz:
case ItemC_vmaxe:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Vmax ");
if(i==ItemC_vmaxx)lcd.print("x:");
if(i==ItemC_vmaxy)lcd.print("y:");
if(i==ItemC_vmaxz)lcd.print("z:");
if(i==ItemC_vmaxe)lcd.print("e:");
lcd.setCursor(13,line);lcd.print(itostr3(max_feedrate[i-ItemC_vmaxx]/60));
}
if((activeline==line) )
{
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)max_feedrate[i-ItemC_vmaxx]/60;
}
else
{
max_feedrate[i-ItemC_vmaxx]= encoderpos*60;
encoderpos=activeline*lcdslow;
}
BLOCK;
beepshort();
}
if(linechanging)
{
if(encoderpos<1) encoderpos=1;
if(encoderpos>990) encoderpos=990;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
}
}break;
case ItemC_vmin:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Vmin:");
lcd.setCursor(13,line);lcd.print(itostr3(minimumfeedrate/60));
}
if((activeline==line) )
{
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)(minimumfeedrate/60.);
}
else
{
minimumfeedrate= encoderpos*60;
encoderpos=activeline*lcdslow;
}
BLOCK;
beepshort();
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>990) encoderpos=990;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
}
}break;
case ItemC_vtravmin:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" VTrav min:");
lcd.setCursor(13,line);lcd.print(itostr3(mintravelfeedrate/60));
}
if((activeline==line) )
{
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)mintravelfeedrate/60;
}
else
{
mintravelfeedrate= encoderpos*60;
encoderpos=activeline*lcdslow;
}
BLOCK;
beepshort();
}
if(linechanging)
{
if(encoderpos<0) encoderpos=0;
if(encoderpos>990) encoderpos=990;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));
}
}
}break;
case ItemC_amaxx:
case ItemC_amaxy:
case ItemC_amaxz:
case ItemC_amaxe:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Amax ");
if(i==ItemC_amaxx)lcd.print("x:");
if(i==ItemC_amaxy)lcd.print("y:");
if(i==ItemC_amaxz)lcd.print("z:");
if(i==ItemC_amaxe)lcd.print("e:");
lcd.setCursor(13,line);lcd.print(itostr3(max_acceleration_units_per_sq_second[i-ItemC_amaxx]/100));lcd.print("00");
}
if((activeline==line) )
{
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)max_acceleration_units_per_sq_second[i-ItemC_amaxx]/100;
}
else
{
max_acceleration_units_per_sq_second[i-ItemC_amaxx]= encoderpos*100;
encoderpos=activeline*lcdslow;
}
BLOCK;
beepshort();
}
if(linechanging)
{
if(encoderpos<1) encoderpos=1;
if(encoderpos>990) encoderpos=990;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcd.print("00");
}
}
}break;
case ItemC_aret://float retract_acceleration = 7000;
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" A-retract:");
lcd.setCursor(13,line);lcd.print(ftostr3(retract_acceleration/100));lcd.print("00");
}
if((activeline==line) )
{
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)retract_acceleration/100;
}
else
{
retract_acceleration= encoderpos*100;
encoderpos=activeline*lcdslow;
}
BLOCK;
beepshort();
}
if(linechanging)
{
if(encoderpos<10) encoderpos=10;
if(encoderpos>990) encoderpos=990;
lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcd.print("00");
}
}
}break;
case ItemC_esteps://axis_steps_per_unit[i] = code_value();
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Esteps/mm:");
lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[3]));
}
if((activeline==line) )
{
if(CLICKED)
{
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)axis_steps_per_unit[3];
}
else
{
float factor=float(encoderpos)/float(axis_steps_per_unit[3]);
position[E_AXIS]=lround(position[E_AXIS]*factor);
//current_position[3]*=factor;
axis_steps_per_unit[E_AXIS]= encoderpos;
encoderpos=activeline*lcdslow;
}
BLOCK;
beepshort();
}
if(linechanging)
{
if(encoderpos<5) encoderpos=5;
if(encoderpos>9999) encoderpos=9999;
lcd.setCursor(13,line);lcd.print(itostr4(encoderpos));
}
}
}break;
case ItemC_store:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Store EPROM");
}
if((activeline==line) && CLICKED)
{
//enquecommand("M84");
beepshort();
BLOCK;
StoreSettings();
}
}break;
case ItemC_load:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Load EPROM");
}
if((activeline==line) && CLICKED)
{
//enquecommand("M84");
beepshort();
BLOCK;
RetrieveSettings();
}
}break;
case ItemC_failsafe:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" Restore Failsafe");
}
if((activeline==line) && CLICKED)
{
//enquecommand("M84");
beepshort();
BLOCK;
RetrieveSettings(true);
}
}break;
default:
break;
}
line++;
}
lastlineoffset=lineoffset;
if(!linechanging && ((encoderpos/lcdslow!=lastencoderpos/lcdslow)||force_lcd_update))
{
lcd.setCursor(0,activeline);lcd.print((activeline+lineoffset)?' ':' ');
if(encoderpos<0)
{
lineoffset--;
if(lineoffset<0)
lineoffset=0;
encoderpos=0;
force_lcd_update=true;
}
if(encoderpos/lcdslow>3)
{
lineoffset++;
encoderpos=3*lcdslow;
if(lineoffset>(ItemC_failsafe+1-LCD_HEIGHT))
lineoffset=ItemC_failsafe+1-LCD_HEIGHT;
force_lcd_update=true;
}
//encoderpos=encoderpos%LCD_HEIGHT;
lastencoderpos=encoderpos;
activeline=encoderpos/lcdslow;
if(activeline>3) activeline=3;
lcd.setCursor(0,activeline);lcd.print((activeline+lineoffset)?'>':'\003');
}
}
#include "SdFat.h"
void MainMenu::showSD()
{
#ifdef SDSUPPORT
uint8_t line=0;
if(lastlineoffset!=lineoffset)
{
force_lcd_update=true;
}
static uint8_t nrfiles=0;
if(force_lcd_update)
{
clear();
2011-11-06 22:48:15 +01:00
if(card.cardOK)
{
nrfiles=card.getnrfilenames();
}
else
{
nrfiles=0;
lineoffset=0;
}
//Serial.print("Nr files:"); Serial.println((int)nrfiles);
}
for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
{
switch(i)
{
case 0:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);lcd.print(" File");
}
if((activeline==line) && CLICKED)
{
BLOCK
status=Main_Menu;
beepshort();
}
}break;
case 1:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);
#ifdef CARDINSERTED
if(CARDINSERTED)
#else
if(true)
#endif
{
lcd.print(" \004Refresh");
}
else
{
lcd.print(" \004Insert Card");
}
}
if((activeline==line) && CLICKED)
{
BLOCK;
beepshort();
card.initsd();
force_lcd_update=true;
nrfiles=card.getnrfilenames();
}
}break;
default:
{
if(i-2<nrfiles)
{
if(force_lcd_update)
{
card.getfilename(i-2);
//Serial.print("Filenr:");Serial.println(i-2);
lcd.setCursor(0,line);lcd.print(" ");lcd.print(card.filename);
}
if((activeline==line) && CLICKED)
{
BLOCK
card.getfilename(i-2);
char cmd[30];
for(int8_t i=0;i<strlen(card.filename);i++)
card.filename[i]=tolower(card.filename[i]);
sprintf(cmd,"M23 %s",card.filename);
//sprintf(cmd,"M115");
enquecommand(cmd);
enquecommand("M24");
beep();
status=Main_Status;
lcd_status(card.filename);
}
}
}
break;
}
line++;
}
lastlineoffset=lineoffset;
if((encoderpos!=lastencoderpos)||force_lcd_update)
{
lcd.setCursor(0,activeline);lcd.print((activeline+lineoffset)?' ':' ');
if(encoderpos<0)
{
lineoffset--;
if(lineoffset<0)
lineoffset=0;
encoderpos=0;
force_lcd_update=true;
}
if(encoderpos/lcdslow>3)
{
lineoffset++;
encoderpos=3*lcdslow;
if(lineoffset>(1+nrfiles+1-LCD_HEIGHT))
lineoffset=1+nrfiles+1-LCD_HEIGHT;
force_lcd_update=true;
}
lastencoderpos=encoderpos;
activeline=encoderpos;
if(activeline>3)
{
activeline=3;
}
if(activeline<0)
{
activeline=0;
}
if(activeline>1+nrfiles) activeline=1+nrfiles;
if(lineoffset>1+nrfiles) lineoffset=1+nrfiles;
lcd.setCursor(0,activeline);lcd.print((activeline+lineoffset)?'>':'\003');
}
#endif
}
enum {ItemM_watch, ItemM_prepare, ItemM_control, ItemM_file };
void MainMenu::showMainMenu()
{
//if(int(encoderpos/lcdslow)!=int(lastencoderpos/lcdslow))
// force_lcd_update=true;
#ifndef ULTIPANEL
force_lcd_update=false;
#endif
//Serial.println((int)activeline);
if(force_lcd_update)
clear();
for(int8_t line=0;line<LCD_HEIGHT;line++)
{
switch(line)
{
case ItemM_watch:
{
if(force_lcd_update) {lcd.setCursor(0,line);lcd.print(" Watch \x7E");}
if((activeline==line)&&CLICKED)
{
BLOCK;
beepshort();
status=Main_Status;
}
} break;
case ItemM_prepare:
{
if(force_lcd_update) {lcd.setCursor(0,line);lcd.print(" Prepare \x7E");}
if((activeline==line)&&CLICKED)
{
BLOCK;
status=Main_Prepare;
beepshort();
}
} break;
case ItemM_control:
{
if(force_lcd_update) {lcd.setCursor(0,line);lcd.print(" Control \x7E");}
if((activeline==line)&&CLICKED)
{
BLOCK;
status=Main_Control;
beepshort();
}
}break;
#ifdef SDSUPPORT
case ItemM_file:
{
if(force_lcd_update)
{
lcd.setCursor(0,line);
#ifdef CARDINSERTED
if(CARDINSERTED)
#else
if(true)
#endif
{
2011-11-06 22:48:15 +01:00
if(card.sdprinting)
lcd.print(" Stop Print \x7E");
else
lcd.print(" Card Menu \x7E");
}
else
{
lcd.print(" No Card");
}
}
#ifdef CARDINSERTED
if(CARDINSERTED)
#endif
if((activeline==line)&&CLICKED)
{
2011-11-06 22:48:15 +01:00
card.sdprinting = false;
BLOCK;
status=Main_SD;
beepshort();
}
}break;
#endif
default:
SERIAL_ERRORLN("Something is wrong in the MenuStructure.");
break;
}
}
if(activeline<0)
activeline=0;
if(activeline>=LCD_HEIGHT)
activeline=LCD_HEIGHT-1;
if((encoderpos!=lastencoderpos)||force_lcd_update)
{
lcd.setCursor(0,activeline);lcd.print(activeline?' ':' ');
if(encoderpos<0) encoderpos=0;
if(encoderpos>3*lcdslow)
encoderpos=3*lcdslow;
activeline=abs(encoderpos/lcdslow)%LCD_HEIGHT;
if(activeline<0)
activeline=0;
if(activeline>=LCD_HEIGHT)
activeline=LCD_HEIGHT-1;
lastencoderpos=encoderpos;
lcd.setCursor(0,activeline);lcd.print(activeline?'>':'\003');
}
}
void MainMenu::update()
{
static MainStatus oldstatus=Main_Menu; //init automatically causes foce_lcd_update=true
static long timeoutToStatus=0;
static bool oldcardstatus=false;
#ifdef CARDINSERTED
if((CARDINSERTED != oldcardstatus))
{
force_lcd_update=true;
oldcardstatus=CARDINSERTED;
//Serial.println("echo: SD CHANGE");
if(CARDINSERTED)
{
card.initsd();
lcd_status("Card inserted");
}
else
{
2011-11-06 22:48:15 +01:00
card.release();
lcd_status("Card removed");
}
}
#endif
if(status!=oldstatus)
{
//Serial.println(status);
//clear();
force_lcd_update=true;
encoderpos=0;
lineoffset=0;
oldstatus=status;
}
if( (encoderpos!=lastencoderpos) || CLICKED)
timeoutToStatus=millis()+STATUSTIMEOUT;
switch(status)
{
case Main_Status:
{
showStatus();
if(CLICKED)
{
linechanging=false;
BLOCK
status=Main_Menu;
timeoutToStatus=millis()+STATUSTIMEOUT;
}
}break;
case Main_Menu:
{
showMainMenu();
linechanging=false;
}break;
case Main_Prepare:
{
showPrepare();
}break;
case Main_Control:
{
showControl();
}break;
case Main_SD:
{
showSD();
}break;
}
if(timeoutToStatus<millis())
status=Main_Status;
force_lcd_update=false;
lastencoderpos=encoderpos;
}
//return for string conversion routines
static char conv[8];
// convert float to string with +123.4 format
char *ftostr3(const float &x)
{
//sprintf(conv,"%5.1f",x);
int xx=x;
conv[0]=(xx/100)%10+'0';
conv[1]=(xx/10)%10+'0';
conv[2]=(xx)%10+'0';
conv[3]=0;
return conv;
}
char *itostr2(const uint8_t &x)
{
//sprintf(conv,"%5.1f",x);
int xx=x;
conv[0]=(xx/10)%10+'0';
conv[1]=(xx)%10+'0';
conv[2]=0;
return conv;
}
// convert float to string with +123.4 format
char *ftostr31(const float &x)
{
int xx=x*10;
conv[0]=(xx>=0)?'+':'-';
xx=abs(xx);
conv[1]=(xx/1000)%10+'0';
conv[2]=(xx/100)%10+'0';
conv[3]=(xx/10)%10+'0';
conv[4]='.';
conv[5]=(xx)%10+'0';
conv[6]=0;
return conv;
}
char *itostr31(const int &xx)
{
conv[0]=(xx>=0)?'+':'-';
conv[1]=(xx/1000)%10+'0';
conv[2]=(xx/100)%10+'0';
conv[3]=(xx/10)%10+'0';
conv[4]='.';
conv[5]=(xx)%10+'0';
conv[6]=0;
return conv;
}
char *itostr3(const int &xx)
{
conv[0]=(xx/100)%10+'0';
conv[1]=(xx/10)%10+'0';
conv[2]=(xx)%10+'0';
conv[3]=0;
return conv;
}
char *itostr4(const int &xx)
{
conv[0]=(xx/1000)%10+'0';
conv[1]=(xx/100)%10+'0';
conv[2]=(xx/10)%10+'0';
conv[3]=(xx)%10+'0';
conv[4]=0;
return conv;
}
// convert float to string with +1234.5 format
char *ftostr51(const float &x)
{
int xx=x*10;
conv[0]=(xx>=0)?'+':'-';
xx=abs(xx);
conv[1]=(xx/10000)%10+'0';
conv[2]=(xx/1000)%10+'0';
conv[3]=(xx/100)%10+'0';
conv[4]=(xx/10)%10+'0';
conv[5]='.';
conv[6]=(xx)%10+'0';
conv[7]=0;
return conv;
}
char *fillto(int8_t n,char *c)
{
static char ret[25];
bool endfound=false;
for(int8_t i=0;i<n;i++)
{
ret[i]=c[i];
if(c[i]==0)
{
endfound=true;
}
if(endfound)
{
ret[i]=' ';
}
}
ret[n]=0;
return ret;
}
#endif //ULTRA_LCD