Firmware/Marlin/enum.h

173 lines
4.9 KiB
C
Raw Normal View History

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef __ENUM_H__
#define __ENUM_H__
#include "MarlinConfig.h"
/**
* Axis indices as enumerated constants
*
* Special axis:
* - A_AXIS and B_AXIS are used by COREXY printers
* - X_HEAD and Y_HEAD is used for systems that don't have a 1:1 relationship
* between X_AXIS and X Head movement, like CoreXY bots
*/
2018-03-07 04:50:29 +01:00
enum AxisEnum : unsigned char {
X_AXIS = 0,
A_AXIS = 0,
Y_AXIS = 1,
B_AXIS = 1,
Z_AXIS = 2,
C_AXIS = 2,
E_AXIS = 3,
X_HEAD = 4,
Y_HEAD = 5,
Z_HEAD = 6,
2018-03-07 04:50:29 +01:00
ALL_AXES = 0xFE,
NO_AXIS = 0xFF
};
#define LOOP_S_LE_N(VAR, S, N) for (uint8_t VAR=S; VAR<=N; VAR++)
#define LOOP_S_L_N(VAR, S, N) for (uint8_t VAR=S; VAR<N; VAR++)
#define LOOP_LE_N(VAR, N) LOOP_S_LE_N(VAR, 0, N)
#define LOOP_L_N(VAR, N) LOOP_S_L_N(VAR, 0, N)
#define LOOP_NA(VAR) LOOP_L_N(VAR, NUM_AXIS)
#define LOOP_XYZ(VAR) LOOP_S_LE_N(VAR, X_AXIS, Z_AXIS)
#define LOOP_XYZE(VAR) LOOP_S_LE_N(VAR, X_AXIS, E_AXIS)
#define LOOP_XYZE_N(VAR) LOOP_S_L_N(VAR, X_AXIS, XYZE_N)
#define LOOP_ABC(VAR) LOOP_S_LE_N(VAR, A_AXIS, C_AXIS)
#define LOOP_ABCE(VAR) LOOP_S_LE_N(VAR, A_AXIS, E_AXIS)
#define LOOP_ABCE_N(VAR) LOOP_S_L_N(VAR, A_AXIS, XYZE_N)
2016-07-23 22:07:23 +02:00
typedef enum {
LINEARUNIT_MM,
LINEARUNIT_INCH
} LinearUnit;
typedef enum {
TEMPUNIT_C,
TEMPUNIT_K,
TEMPUNIT_F
} TempUnit;
/**
* Debug flags
* Not yet widely applied
*/
2018-03-07 04:50:29 +01:00
enum DebugFlags : unsigned char {
DEBUG_NONE = 0,
DEBUG_ECHO = _BV(0), ///< Echo commands in order as they are processed
DEBUG_INFO = _BV(1), ///< Print messages for code that has debug output
DEBUG_ERRORS = _BV(2), ///< Not implemented
DEBUG_DRYRUN = _BV(3), ///< Ignore temperature setting and E movement commands
DEBUG_COMMUNICATION = _BV(4), ///< Not implemented
2016-08-28 02:37:31 +02:00
DEBUG_LEVELING = _BV(5), ///< Print detailed output for homing and leveling
2017-03-20 21:38:25 +01:00
DEBUG_MESH_ADJUST = _BV(6), ///< UBL bed leveling
2016-08-28 02:37:31 +02:00
DEBUG_ALL = 0xFF
};
#if ENABLED(ADVANCED_PAUSE_FEATURE)
2018-03-07 04:50:29 +01:00
enum AdvancedPauseMenuResponse : char {
ADVANCED_PAUSE_RESPONSE_WAIT_FOR,
ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE,
ADVANCED_PAUSE_RESPONSE_RESUME_PRINT
};
#if ENABLED(ULTIPANEL)
2018-03-07 04:50:29 +01:00
enum AdvancedPauseMessage : char {
ADVANCED_PAUSE_MESSAGE_INIT,
ADVANCED_PAUSE_MESSAGE_UNLOAD,
ADVANCED_PAUSE_MESSAGE_INSERT,
ADVANCED_PAUSE_MESSAGE_LOAD,
2017-12-27 05:51:55 +01:00
ADVANCED_PAUSE_MESSAGE_PURGE,
#if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE)
ADVANCED_PAUSE_MESSAGE_CONTINUOUS_PURGE,
#endif
ADVANCED_PAUSE_MESSAGE_OPTION,
ADVANCED_PAUSE_MESSAGE_RESUME,
ADVANCED_PAUSE_MESSAGE_STATUS,
ADVANCED_PAUSE_MESSAGE_CLICK_TO_HEAT_NOZZLE,
ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT
};
#endif
2017-12-27 05:51:55 +01:00
2018-03-07 04:50:29 +01:00
enum AdvancedPauseMode : char {
2017-12-27 05:51:55 +01:00
ADVANCED_PAUSE_MODE_PAUSE_PRINT,
ADVANCED_PAUSE_MODE_LOAD_FILAMENT,
ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT
};
#endif
/**
* States for managing Marlin and host communication
* Marlin sends messages if blocked or busy
*/
#if ENABLED(HOST_KEEPALIVE_FEATURE)
2018-03-07 04:50:29 +01:00
enum MarlinBusyState : char {
NOT_BUSY, // Not in a handler
IN_HANDLER, // Processing a GCode
IN_PROCESS, // Known to be blocking command input (as in G29)
PAUSED_FOR_USER, // Blocking pending any input
PAUSED_FOR_INPUT // Blocking pending text input (concept)
};
#endif
/**
* SD Card
*/
2018-03-07 04:50:29 +01:00
enum LsAction : char { LS_SerialPrint, LS_Count, LS_GetFilename };
/**
* Ultra LCD
*/
2018-03-07 04:50:29 +01:00
enum LCDViewAction : char {
LCDVIEW_NONE,
LCDVIEW_REDRAW_NOW,
LCDVIEW_CALL_REDRAW_NEXT,
LCDVIEW_CLEAR_CALL_REDRAW,
LCDVIEW_CALL_NO_REDRAW
};
2017-06-22 15:57:53 +02:00
/**
* Dual X Carriage modes. A Dual Nozzle can also do duplication.
*/
2017-05-01 19:20:25 +02:00
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
2018-03-07 04:50:29 +01:00
enum DualXMode : char {
2017-06-22 15:57:53 +02:00
DXC_FULL_CONTROL_MODE, // DUAL_X_CARRIAGE only
DXC_AUTO_PARK_MODE, // DUAL_X_CARRIAGE only
DXC_DUPLICATION_MODE
};
#endif
/**
* Workspace planes only apply to G2/G3 moves
* (and "canned cycles" - not a current feature)
*/
#if ENABLED(CNC_WORKSPACE_PLANES)
2018-03-07 04:50:29 +01:00
enum WorkspacePlane : char { PLANE_XY, PLANE_ZX, PLANE_YZ };
#endif
#endif // __ENUM_H__