Firmware/Marlin/Marlin.h

500 lines
16 KiB
C
Raw Normal View History

/**
2016-03-24 19:01:20 +01:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
2012-06-02 20:44:17 +02:00
#ifndef MARLIN_H
#define MARLIN_H
#include <math.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <inttypes.h>
#include <util/delay.h>
2011-12-22 12:38:50 +01:00
#include <avr/pgmspace.h>
#include <avr/eeprom.h>
#include <avr/interrupt.h>
#include "MarlinConfig.h"
#ifdef DEBUG_GCODE_PARSER
#include "gcode.h"
#endif
#include "enum.h"
#include "types.h"
#include "fastio.h"
2016-07-26 05:53:36 +02:00
#include "utility.h"
2017-04-02 08:04:54 +02:00
#include "serial.h"
2016-04-27 03:13:27 +02:00
#if ENABLED(PRINTCOUNTER)
#include "printcounter.h"
#else
#include "stopwatch.h"
#endif
2016-03-19 06:22:40 +01:00
void idle(
#if ENABLED(ADVANCED_PAUSE_FEATURE)
bool no_stepper_sleep = false // pass true to keep steppers from disabling on timeout
2016-03-19 06:22:40 +01:00
#endif
);
2015-05-27 05:08:21 +02:00
void manage_inactivity(bool ignore_stepper_queue = false);
2011-08-12 22:28:35 +02:00
2016-07-20 19:30:10 +02:00
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
extern bool extruder_duplication_enabled;
#endif
2016-07-11 19:19:07 +02:00
#if HAS_X2_ENABLE
#define enable_X() do{ X_ENABLE_WRITE( X_ENABLE_ON); X2_ENABLE_WRITE( X_ENABLE_ON); }while(0)
#define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); X2_ENABLE_WRITE(!X_ENABLE_ON); axis_known_position[X_AXIS] = false; }while(0)
2015-04-04 00:31:35 +02:00
#elif HAS_X_ENABLE
#define enable_X() X_ENABLE_WRITE( X_ENABLE_ON)
#define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); axis_known_position[X_AXIS] = false; }while(0)
2011-08-12 22:28:35 +02:00
#else
#define enable_X() NOOP
#define disable_X() NOOP
2011-08-12 22:28:35 +02:00
#endif
2016-07-11 19:19:07 +02:00
#if HAS_Y2_ENABLE
#define enable_Y() do{ Y_ENABLE_WRITE( Y_ENABLE_ON); Y2_ENABLE_WRITE(Y_ENABLE_ON); }while(0)
#define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); Y2_ENABLE_WRITE(!Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }while(0)
2016-07-11 19:19:07 +02:00
#elif HAS_Y_ENABLE
#define enable_Y() Y_ENABLE_WRITE( Y_ENABLE_ON)
#define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }while(0)
2011-08-12 22:28:35 +02:00
#else
#define enable_Y() NOOP
#define disable_Y() NOOP
2011-08-12 22:28:35 +02:00
#endif
2016-07-11 19:19:07 +02:00
#if HAS_Z2_ENABLE
#define enable_Z() do{ Z_ENABLE_WRITE( Z_ENABLE_ON); Z2_ENABLE_WRITE(Z_ENABLE_ON); }while(0)
#define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); Z2_ENABLE_WRITE(!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }while(0)
2016-07-11 19:19:07 +02:00
#elif HAS_Z_ENABLE
#define enable_Z() Z_ENABLE_WRITE( Z_ENABLE_ON)
#define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }while(0)
2011-08-12 22:28:35 +02:00
#else
#define enable_Z() NOOP
#define disable_Z() NOOP
2011-08-12 22:28:35 +02:00
#endif
#if ENABLED(MIXING_EXTRUDER)
/**
* Mixing steppers synchronize their enable (and direction) together
*/
#if MIXING_STEPPERS > 3
#define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); E3_ENABLE_WRITE( E_ENABLE_ON); }
#define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); E3_ENABLE_WRITE(!E_ENABLE_ON); }
#elif MIXING_STEPPERS > 2
#define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); }
#define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); }
#else
#define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); }
#define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); }
#endif
#define enable_E1() NOOP
#define disable_E1() NOOP
#define enable_E2() NOOP
#define disable_E2() NOOP
#define enable_E3() NOOP
#define disable_E3() NOOP
#define enable_E4() NOOP
#define disable_E4() NOOP
#else // !MIXING_EXTRUDER
#if HAS_E0_ENABLE
#define enable_E0() E0_ENABLE_WRITE( E_ENABLE_ON)
#define disable_E0() E0_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define enable_E0() NOOP
#define disable_E0() NOOP
#endif
#if E_STEPPERS > 1 && HAS_E1_ENABLE
#define enable_E1() E1_ENABLE_WRITE( E_ENABLE_ON)
#define disable_E1() E1_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define enable_E1() NOOP
#define disable_E1() NOOP
#endif
#if E_STEPPERS > 2 && HAS_E2_ENABLE
#define enable_E2() E2_ENABLE_WRITE( E_ENABLE_ON)
#define disable_E2() E2_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define enable_E2() NOOP
#define disable_E2() NOOP
#endif
#if E_STEPPERS > 3 && HAS_E3_ENABLE
#define enable_E3() E3_ENABLE_WRITE( E_ENABLE_ON)
#define disable_E3() E3_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define enable_E3() NOOP
#define disable_E3() NOOP
#endif
#if E_STEPPERS > 4 && HAS_E4_ENABLE
#define enable_E4() E4_ENABLE_WRITE( E_ENABLE_ON)
#define disable_E4() E4_ENABLE_WRITE(!E_ENABLE_ON)
#else
#define enable_E4() NOOP
#define disable_E4() NOOP
#endif
#endif // !MIXING_EXTRUDER
2016-09-29 22:06:01 +02:00
#if ENABLED(G38_PROBE_TARGET)
2016-09-26 08:30:34 +02:00
extern bool G38_move, // flag to tell the interrupt handler that a G38 command is being run
G38_endstop_hit; // flag from the interrupt handler to indicate if the endstop went active
#endif
/**
* The axis order in all axis related arrays is X, Y, Z, E
*/
#define _AXIS(AXIS) AXIS ##_AXIS
void enable_all_steppers();
2017-03-18 03:12:19 +01:00
void disable_e_steppers();
void disable_all_steppers();
2011-08-12 22:28:35 +02:00
void FlushSerialRequestResend();
void ok_to_send();
2011-08-12 22:28:35 +02:00
void kill(const char*);
void quickstop_stepper();
2016-06-03 02:11:54 +02:00
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
2016-04-18 08:16:49 +02:00
void handle_filament_runout();
#endif
extern uint8_t marlin_debug_flags;
2016-03-30 04:50:01 +02:00
#define DEBUGGING(F) (marlin_debug_flags & (DEBUG_## F))
2015-04-08 09:56:19 +02:00
extern bool Running;
inline bool IsRunning() { return Running; }
inline bool IsStopped() { return !Running; }
2011-08-12 22:28:35 +02:00
bool enqueue_and_echo_command(const char* cmd, bool say_ok=false); // Add a single command to the end of the buffer. Return false on failure.
void enqueue_and_echo_commands_P(const char * const cmd); // Set one or more commands to be prioritized over the next Serial/SD command.
void clear_command_queue();
2015-04-13 03:07:08 +02:00
extern millis_t previous_cmd_ms;
inline void refresh_cmd_timeout() { previous_cmd_ms = millis(); }
#if ENABLED(FAST_PWM_FAN)
void setPwmFrequency(uint8_t pin, int val);
#endif
2011-08-12 22:28:35 +02:00
2016-07-16 03:49:34 +02:00
/**
* Feedrate scaling and conversion
*/
extern int16_t feedrate_percentage;
2016-07-16 03:49:34 +02:00
#define MMS_SCALED(MM_S) ((MM_S)*feedrate_percentage*0.01)
2016-07-16 03:49:34 +02:00
extern bool axis_relative_modes[];
2017-05-29 19:52:56 +02:00
extern bool axis_known_position[XYZ];
extern bool axis_homed[XYZ];
2016-07-07 04:59:19 +02:00
extern volatile bool wait_for_heatup;
#if HAS_RESUME_CONTINUE
2016-09-12 03:51:53 +02:00
extern volatile bool wait_for_user;
#endif
2016-07-25 01:34:01 +02:00
extern float current_position[NUM_AXIS];
2017-03-05 01:01:33 +01:00
// Workspace offsets
#if HAS_WORKSPACE_OFFSET
#if HAS_HOME_OFFSET
extern float home_offset[XYZ];
#endif
#if HAS_POSITION_SHIFT
extern float position_shift[XYZ];
#endif
#endif
#if HAS_HOME_OFFSET && HAS_POSITION_SHIFT
extern float workspace_offset[XYZ];
#define WORKSPACE_OFFSET(AXIS) workspace_offset[AXIS]
#elif HAS_HOME_OFFSET
#define WORKSPACE_OFFSET(AXIS) home_offset[AXIS]
#elif HAS_POSITION_SHIFT
#define WORKSPACE_OFFSET(AXIS) position_shift[AXIS]
#else
#define WORKSPACE_OFFSET(AXIS) 0
#endif
2017-11-03 02:17:51 +01:00
#define NATIVE_TO_LOGICAL(POS, AXIS) ((POS) + WORKSPACE_OFFSET(AXIS))
#define LOGICAL_TO_NATIVE(POS, AXIS) ((POS) - WORKSPACE_OFFSET(AXIS))
#if HAS_POSITION_SHIFT || DISABLED(DELTA)
2017-11-03 02:17:51 +01:00
#define LOGICAL_X_POSITION(POS) NATIVE_TO_LOGICAL(POS, X_AXIS)
#define LOGICAL_Y_POSITION(POS) NATIVE_TO_LOGICAL(POS, Y_AXIS)
#define RAW_X_POSITION(POS) LOGICAL_TO_NATIVE(POS, X_AXIS)
#define RAW_Y_POSITION(POS) LOGICAL_TO_NATIVE(POS, Y_AXIS)
2017-03-05 01:01:33 +01:00
#else
#define LOGICAL_X_POSITION(POS) (POS)
#define LOGICAL_Y_POSITION(POS) (POS)
#define RAW_X_POSITION(POS) (POS)
#define RAW_Y_POSITION(POS) (POS)
2017-03-05 01:01:33 +01:00
#endif
2017-11-03 02:17:51 +01:00
#define LOGICAL_Z_POSITION(POS) NATIVE_TO_LOGICAL(POS, Z_AXIS)
#define RAW_Z_POSITION(POS) LOGICAL_TO_NATIVE(POS, Z_AXIS)
// Hotend Offsets
#if HOTENDS > 1
extern float hotend_offset[XYZ][HOTENDS];
#endif
// Software Endstops
extern float soft_endstop_min[XYZ], soft_endstop_max[XYZ];
2017-03-05 01:01:33 +01:00
2017-03-16 23:20:24 +01:00
#if HAS_SOFTWARE_ENDSTOPS
extern bool soft_endstops_enabled;
void clamp_to_software_endstops(float target[XYZ]);
#else
#define soft_endstops_enabled false
#define clamp_to_software_endstops(x) NOOP
#endif
2016-07-25 01:34:01 +02:00
#if HAS_WORKSPACE_OFFSET || ENABLED(DUAL_X_CARRIAGE)
2017-03-05 01:01:33 +01:00
void update_software_endstops(const AxisEnum axis);
#endif
2016-07-25 01:34:01 +02:00
2017-11-01 19:08:46 +01:00
#if ENABLED(CNC_COORDINATE_SYSTEMS)
#define MAX_COORDINATE_SYSTEMS 9
extern float coordinate_system[MAX_COORDINATE_SYSTEMS][XYZ];
bool select_coordinate_system(const int8_t _new);
#endif
void report_current_position();
2016-09-12 10:48:29 +02:00
#if IS_KINEMATIC
2016-08-21 05:38:32 +02:00
extern float delta[ABC];
2017-11-03 02:17:51 +01:00
void inverse_kinematics(const float raw[XYZ]);
2016-09-12 10:48:29 +02:00
#endif
#if ENABLED(DELTA)
extern float delta_height,
delta_endstop_adj[ABC],
2016-09-12 10:48:29 +02:00
delta_radius,
delta_diagonal_rod,
delta_calibration_radius,
2016-09-12 10:48:29 +02:00
delta_segments_per_second,
delta_tower_angle_trim[ABC],
delta_clip_start_height;
2017-11-08 09:43:29 +01:00
void recalc_delta_settings();
#elif IS_SCARA
2016-09-12 10:48:29 +02:00
void forward_kinematics_SCARA(const float &a, const float &b);
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
2016-12-10 07:17:49 +01:00
extern int bilinear_grid_spacing[2], bilinear_start[2];
extern float bilinear_grid_factor[2],
z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
2017-11-03 02:17:51 +01:00
float bilinear_z_offset(const float raw[XYZ]);
2016-12-10 07:17:49 +01:00
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL)
2017-04-08 10:16:13 +02:00
typedef struct { double A, B, D; } linear_fit;
linear_fit* lsf_linear_fit(double x[], double y[], double z[], const int);
#endif
2017-05-01 23:13:09 +02:00
#if HAS_LEVELING
bool leveling_is_valid();
void set_bed_leveling_enabled(const bool enable=true);
2016-12-10 07:17:49 +01:00
void reset_bed_level();
#endif
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
void set_z_fade_height(const float zfh);
#endif
#if ENABLED(X_DUAL_ENDSTOPS)
extern float x_endstop_adj;
#endif
#if ENABLED(Y_DUAL_ENDSTOPS)
extern float y_endstop_adj;
#endif
#if ENABLED(Z_DUAL_ENDSTOPS)
2015-07-15 04:49:43 +02:00
extern float z_endstop_adj;
#endif
2016-06-15 03:05:20 +02:00
#if HAS_BED_PROBE
extern float zprobe_zoffset;
void refresh_zprobe_zoffset(const bool no_babystep=false);
#define DEPLOY_PROBE() set_probe_deployed(true)
#define STOW_PROBE() set_probe_deployed(false)
#else
#define DEPLOY_PROBE()
#define STOW_PROBE()
#endif
#if ENABLED(HOST_KEEPALIVE_FEATURE)
2017-03-29 02:45:54 +02:00
extern MarlinBusyState busy_state;
#define KEEPALIVE_STATE(n) do{ busy_state = n; }while(0)
#else
#define KEEPALIVE_STATE(n) NOOP
#endif
2016-03-06 03:27:45 +01:00
#if FAN_COUNT > 0
extern int16_t fanSpeeds[FAN_COUNT];
2017-10-07 16:29:22 +02:00
#if ENABLED(EXTRA_FAN_SPEED)
extern int16_t old_fanSpeeds[FAN_COUNT],
new_fanSpeeds[FAN_COUNT];
#endif
#if ENABLED(PROBING_FANS_OFF)
extern bool fans_paused;
extern int16_t paused_fanSpeeds[FAN_COUNT];
#endif
2016-03-06 03:27:45 +01:00
#endif
#if ENABLED(BARICUDA)
extern uint8_t baricuda_valve_pressure, baricuda_e_to_p_pressure;
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
2016-09-06 06:57:12 +02:00
extern bool filament_sensor; // Flag that filament sensor readings should control extrusion
extern float filament_width_nominal, // Theoretical filament diameter i.e., 3.00 or 1.75
filament_width_meas; // Measured filament diameter
extern uint8_t meas_delay_cm, // Delay distance
measurement_delay[]; // Ring buffer to delay measurement
extern int8_t filwidth_delay_index[2]; // Ring buffer indexes. Used by planner, temperature, and main code
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
extern AdvancedPauseMenuResponse advanced_pause_menu_response;
#endif
#if ENABLED(PID_EXTRUSION_SCALING)
2015-08-31 04:04:30 +02:00
extern int lpq_len;
#endif
#if ENABLED(FWRETRACT)
extern bool autoretract_enabled; // M209 S - Autoretract switch
extern float retract_length, // M207 S - G10 Retract length
retract_feedrate_mm_s, // M207 F - G10 Retract feedrate
retract_zlift, // M207 Z - G10 Retract hop size
retract_recover_length, // M208 S - G11 Recover length
retract_recover_feedrate_mm_s, // M208 F - G11 Recover feedrate
2017-07-27 05:11:22 +02:00
swap_retract_length, // M207 W - G10 Swap Retract length
swap_retract_recover_length, // M208 W - G11 Swap Recover length
swap_retract_recover_feedrate_mm_s; // M208 R - G11 Swap Recover feedrate
#endif
// Print job timer
2016-04-27 03:13:27 +02:00
#if ENABLED(PRINTCOUNTER)
extern PrintCounter print_job_timer;
#else
extern Stopwatch print_job_timer;
#endif
// Handling multiple extruders pins
extern uint8_t active_extruder;
2016-04-04 01:18:49 +02:00
#if HAS_TEMP_HOTEND || HAS_TEMP_BED
void print_heaterstates();
#endif
#if ENABLED(MIXING_EXTRUDER)
extern float mixing_factor[MIXING_STEPPERS];
#endif
/**
* Blocking movement and shorthand functions
*/
void do_blocking_move_to(const float &x, const float &y, const float &z, const float &fr_mm_s=0.0);
void do_blocking_move_to_x(const float &x, const float &fr_mm_s=0.0);
void do_blocking_move_to_z(const float &z, const float &fr_mm_s=0.0);
void do_blocking_move_to_xy(const float &x, const float &y, const float &fr_mm_s=0.0);
#define HAS_AXIS_UNHOMED_ERR ( \
ENABLED(Z_PROBE_ALLEN_KEY) \
|| ENABLED(Z_PROBE_SLED) \
|| HAS_PROBING_PROCEDURE \
|| HOTENDS > 1 \
|| ENABLED(NOZZLE_CLEAN_FEATURE) \
|| ENABLED(NOZZLE_PARK_FEATURE) \
|| (ENABLED(ADVANCED_PAUSE_FEATURE) && ENABLED(HOME_BEFORE_FILAMENT_CHANGE)) \
|| HAS_M206_COMMAND \
) || ENABLED(NO_MOTION_BEFORE_HOMING)
2017-09-24 22:05:27 +02:00
#if HAS_AXIS_UNHOMED_ERR
2017-05-14 22:57:37 +02:00
bool axis_unhomed_error(const bool x=true, const bool y=true, const bool z=true);
#endif
/**
* position_is_reachable family of functions
*/
#if IS_KINEMATIC // (DELTA or SCARA)
#if IS_SCARA
extern const float L1, L2;
#endif
2017-11-03 02:17:51 +01:00
inline bool position_is_reachable(const float &rx, const float &ry) {
#if ENABLED(DELTA)
return HYPOT2(rx, ry) <= sq(DELTA_PRINTABLE_RADIUS);
#elif IS_SCARA
#if MIDDLE_DEAD_ZONE_R > 0
const float R2 = HYPOT2(rx - SCARA_OFFSET_X, ry - SCARA_OFFSET_Y);
return R2 >= sq(float(MIDDLE_DEAD_ZONE_R)) && R2 <= sq(L1 + L2);
#else
return HYPOT2(rx - SCARA_OFFSET_X, ry - SCARA_OFFSET_Y) <= sq(L1 + L2);
#endif
#else // CARTESIAN
// To be migrated from MakerArm branch in future
#endif
}
2017-11-03 02:17:51 +01:00
inline bool position_is_reachable_by_probe(const float &rx, const float &ry) {
// Both the nozzle and the probe must be able to reach the point.
// This won't work on SCARA since the probe offset rotates with the arm.
2017-11-03 02:17:51 +01:00
return position_is_reachable(rx, ry)
2017-11-10 06:35:37 +01:00
&& position_is_reachable(rx - (X_PROBE_OFFSET_FROM_EXTRUDER), ry - (Y_PROBE_OFFSET_FROM_EXTRUDER));
}
#else // CARTESIAN
2017-11-03 02:17:51 +01:00
inline bool position_is_reachable(const float &rx, const float &ry) {
// Add 0.001 margin to deal with float imprecision
return WITHIN(rx, X_MIN_POS - 0.001, X_MAX_POS + 0.001)
&& WITHIN(ry, Y_MIN_POS - 0.001, Y_MAX_POS + 0.001);
}
2017-11-03 02:17:51 +01:00
inline bool position_is_reachable_by_probe(const float &rx, const float &ry) {
// Add 0.001 margin to deal with float imprecision
return WITHIN(rx, MIN_PROBE_X - 0.001, MAX_PROBE_X + 0.001)
&& WITHIN(ry, MIN_PROBE_Y - 0.001, MAX_PROBE_Y + 0.001);
}
#endif // CARTESIAN
2017-05-20 10:03:08 +02:00
#endif // MARLIN_H