MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
b0abce5a7e
Firmware/Marlin/tmc_util.cpp

629 lines
21 KiB
C++
Raw Normal View History

Updates to TMC support
2018-01-10 02:05:37 +01:00
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "MarlinConfig.h"
#if HAS_TRINAMIC
#include "tmc_util.h"
#include "Marlin.h"
Use static classes for job timers (#9940)
2018-03-05 05:52:25 +01:00
#include "printcounter.h"
Updates to TMC support
2018-01-10 02:05:37 +01:00
#include "duration_t.h"
#include "stepper_indirection.h"
#if ENABLED(TMC_DEBUG)
#include "planner.h"
#endif
bool report_tmc_status = false;
/**
* Check for over temperature or short to ground error flags.
* Report and log warning of overtemperature condition.
* Reduce driver current in a persistent otpw condition.
* Keep track of otpw counter so we don't reduce current on a single instance,
* and so we don't repeatedly report warning before the condition is cleared.
*/
#if ENABLED(MONITOR_DRIVER_STATUS)
struct TMC_driver_data {
uint32_t drv_status;
bool is_otpw;
bool is_ot;
bool is_error;
};
#if ENABLED(HAVE_TMC2130)
static uint32_t get_pwm_scale(TMC2130Stepper &st) { return st.PWM_SCALE(); }
static uint8_t get_status_response(TMC2130Stepper &st) { return st.status_response & 0xF; }
static TMC_driver_data get_driver_data(TMC2130Stepper &st) {
constexpr uint32_t OTPW_bm = 0x4000000UL;
constexpr uint8_t OTPW_bp = 26;
constexpr uint32_t OT_bm = 0x2000000UL;
constexpr uint8_t OT_bp = 25;
constexpr uint8_t DRIVER_ERROR_bm = 0x2UL;
constexpr uint8_t DRIVER_ERROR_bp = 1;
TMC_driver_data data;
data.drv_status = st.DRV_STATUS();
data.is_otpw = (data.drv_status & OTPW_bm) >> OTPW_bp;
data.is_ot = (data.drv_status & OT_bm) >> OT_bp;
data.is_error = (st.status_response & DRIVER_ERROR_bm) >> DRIVER_ERROR_bp;
return data;
}
#endif
#if ENABLED(HAVE_TMC2208)
static uint32_t get_pwm_scale(TMC2208Stepper &st) { return st.pwm_scale_sum(); }
static uint8_t get_status_response(TMC2208Stepper &st) {
uint32_t drv_status = st.DRV_STATUS();
uint8_t gstat = st.GSTAT();
uint8_t response = 0;
response |= (drv_status >> (31-3)) & 0b1000;
response |= gstat & 0b11;
return response;
}
static TMC_driver_data get_driver_data(TMC2208Stepper &st) {
constexpr uint32_t OTPW_bm = 0b1ul;
constexpr uint8_t OTPW_bp = 0;
constexpr uint32_t OT_bm = 0b10ul;
constexpr uint8_t OT_bp = 1;
TMC_driver_data data;
data.drv_status = st.DRV_STATUS();
data.is_otpw = (data.drv_status & OTPW_bm) >> OTPW_bp;
data.is_ot = (data.drv_status & OT_bm) >> OT_bp;
data.is_error = st.drv_err();
return data;
}
#endif
template<typename TMC>
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
void monitor_tmc_driver(TMC &st, const TMC_AxisEnum axis, uint8_t &otpw_cnt) {
Updates to TMC support
2018-01-10 02:05:37 +01:00
TMC_driver_data data = get_driver_data(st);
#if ENABLED(STOP_ON_ERROR)
if (data.is_error) {
SERIAL_EOL();
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
_tmc_say_axis(axis);
SERIAL_ECHOLNPGM(" driver error detected:");
if (data.is_ot) SERIAL_ECHOLNPGM("overtemperature");
if (st.s2ga()) SERIAL_ECHOLNPGM("short to ground (coil A)");
if (st.s2gb()) SERIAL_ECHOLNPGM("short to ground (coil B)");
Updates to TMC support
2018-01-10 02:05:37 +01:00
#if ENABLED(TMC_DEBUG)
tmc_report_all();
#endif
kill(PSTR("Driver error"));
}
#endif
// Report if a warning was triggered
if (data.is_otpw && otpw_cnt == 0) {
char timestamp[10];
duration_t elapsed = print_job_timer.duration();
const bool has_days = (elapsed.value > 60*60*24L);
(void)elapsed.toDigital(timestamp, has_days);
SERIAL_EOL();
SERIAL_ECHO(timestamp);
SERIAL_ECHOPGM(": ");
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
_tmc_say_axis(axis);
Updates to TMC support
2018-01-10 02:05:37 +01:00
SERIAL_ECHOPGM(" driver overtemperature warning! (");
SERIAL_ECHO(st.getCurrent());
SERIAL_ECHOLNPGM("mA)");
}
#if CURRENT_STEP_DOWN > 0
// Decrease current if is_otpw is true and driver is enabled and there's been more then 4 warnings
if (data.is_otpw && !st.isEnabled() && otpw_cnt > 4) {
st.setCurrent(st.getCurrent() - CURRENT_STEP_DOWN, R_SENSE, HOLD_MULTIPLIER);
#if ENABLED(REPORT_CURRENT_CHANGE)
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
_tmc_say_axis(axis);
Updates to TMC support
2018-01-10 02:05:37 +01:00
SERIAL_ECHOLNPAIR(" current decreased to ", st.getCurrent());
#endif
}
#endif
if (data.is_otpw) {
otpw_cnt++;
st.flag_otpw = true;
}
else if (otpw_cnt > 0) otpw_cnt--;
if (report_tmc_status) {
const uint32_t pwm_scale = get_pwm_scale(st);
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
_tmc_say_axis(axis);
Updates to TMC support
2018-01-10 02:05:37 +01:00
SERIAL_ECHOPAIR(":", pwm_scale);
SERIAL_ECHOPGM(" |0b"); SERIAL_PRINT(get_status_response(st), BIN);
SERIAL_ECHOPGM("| ");
if (data.is_error) SERIAL_CHAR('E');
else if (data.is_ot) SERIAL_CHAR('O');
else if (data.is_otpw) SERIAL_CHAR('W');
else if (otpw_cnt > 0) SERIAL_PRINT(otpw_cnt, DEC);
else if (st.flag_otpw) SERIAL_CHAR('F');
SERIAL_CHAR('\t');
}
}
#define HAS_HW_COMMS(ST) ENABLED(ST##_IS_TMC2130)|| (ENABLED(ST##_IS_TMC2208) && defined(ST##_HARDWARE_SERIAL))
void monitor_tmc_driver() {
static millis_t next_cOT = 0;
if (ELAPSED(millis(), next_cOT)) {
next_cOT = millis() + 500;
#if HAS_HW_COMMS(X) || ENABLED(IS_TRAMS)
static uint8_t x_otpw_cnt = 0;
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
monitor_tmc_driver(stepperX, TMC_X, x_otpw_cnt);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
#if HAS_HW_COMMS(Y) || ENABLED(IS_TRAMS)
static uint8_t y_otpw_cnt = 0;
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
monitor_tmc_driver(stepperY, TMC_Y, y_otpw_cnt);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
#if HAS_HW_COMMS(Z) || ENABLED(IS_TRAMS)
static uint8_t z_otpw_cnt = 0;
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
monitor_tmc_driver(stepperZ, TMC_Z, z_otpw_cnt);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
#if HAS_HW_COMMS(X2)
static uint8_t x2_otpw_cnt = 0;
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
monitor_tmc_driver(stepperX2, TMC_X, x2_otpw_cnt);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
#if HAS_HW_COMMS(Y2)
static uint8_t y2_otpw_cnt = 0;
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
monitor_tmc_driver(stepperY2, TMC_Y, y2_otpw_cnt);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
#if HAS_HW_COMMS(Z2)
static uint8_t z2_otpw_cnt = 0;
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
monitor_tmc_driver(stepperZ2, TMC_Z, z2_otpw_cnt);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
#if HAS_HW_COMMS(E0) || ENABLED(IS_TRAMS)
static uint8_t e0_otpw_cnt = 0;
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
monitor_tmc_driver(stepperE0, TMC_E0, e0_otpw_cnt);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
#if HAS_HW_COMMS(E1)
static uint8_t e1_otpw_cnt = 0;
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
monitor_tmc_driver(stepperE1, TMC_E1, e1_otpw_cnt);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
#if HAS_HW_COMMS(E2)
static uint8_t e2_otpw_cnt = 0;
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
monitor_tmc_driver(stepperE2, TMC_E2, e2_otpw_cnt);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
#if HAS_HW_COMMS(E3)
static uint8_t e3_otpw_cnt = 0;
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
monitor_tmc_driver(stepperE3, TMC_E3, e3_otpw_cnt);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
#if HAS_HW_COMMS(E4)
static uint8_t e4_otpw_cnt = 0;
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
monitor_tmc_driver(stepperE4, TMC_E4, e4_otpw_cnt);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
if (report_tmc_status) SERIAL_EOL();
}
}
#endif // MONITOR_DRIVER_STATUS
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
void _tmc_say_axis(const TMC_AxisEnum axis) {
const static char ext_X[] PROGMEM = "X", ext_X2[] PROGMEM = "X2",
ext_Y[] PROGMEM = "Y", ext_Y2[] PROGMEM = "Y2",
ext_Z[] PROGMEM = "Z", ext_Z2[] PROGMEM = "Z2",
ext_E0[] PROGMEM = "E0", ext_E1[] PROGMEM = "E1",
ext_E2[] PROGMEM = "E2", ext_E3[] PROGMEM = "E3",
ext_E4[] PROGMEM = "E4";
const static char* const tmc_axes[] PROGMEM = { ext_X, ext_X2, ext_Y, ext_Y2, ext_Z, ext_Z2, ext_E0, ext_E1, ext_E2, ext_E3, ext_E4 };
Fix `_tmc_say_axis` string address Fixes #10003
2018-03-09 13:07:52 +01:00
serialprintPGM((char*)pgm_read_word(&tmc_axes[axis]));
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
}
void _tmc_say_current(const TMC_AxisEnum axis, const uint16_t curr) {
_tmc_say_axis(axis);
Updates to TMC support
2018-01-10 02:05:37 +01:00
SERIAL_ECHOLNPAIR(" axis driver current: ", curr);
}
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
void _tmc_say_otpw(const TMC_AxisEnum axis, const bool otpw) {
_tmc_say_axis(axis);
Updates to TMC support
2018-01-10 02:05:37 +01:00
SERIAL_ECHOPGM(" axis temperature prewarn triggered: ");
serialprintPGM(otpw ? PSTR("true") : PSTR("false"));
SERIAL_EOL();
}
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
void _tmc_say_otpw_cleared(const TMC_AxisEnum axis) {
_tmc_say_axis(axis);
Updates to TMC support
2018-01-10 02:05:37 +01:00
SERIAL_ECHOLNPGM(" prewarn flag cleared");
}
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
void _tmc_say_pwmthrs(const TMC_AxisEnum axis, const uint32_t thrs) {
_tmc_say_axis(axis);
Updates to TMC support
2018-01-10 02:05:37 +01:00
SERIAL_ECHOLNPAIR(" stealthChop max speed set to ", thrs);
}
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) {
_tmc_say_axis(axis);
Updates to TMC support
2018-01-10 02:05:37 +01:00
SERIAL_ECHOPGM(" driver homing sensitivity set to ");
[1.1.x] Enable Z axis and delta sensorless homing (#9532)
2018-02-08 09:02:48 +01:00
SERIAL_PRINTLN(sgt, DEC);
Updates to TMC support
2018-01-10 02:05:37 +01:00
}
#if ENABLED(TMC_DEBUG)
Make enums into implicit char
2018-03-07 04:50:29 +01:00
enum TMC_debug_enum : char {
Updates to TMC support
2018-01-10 02:05:37 +01:00
TMC_CODES,
TMC_ENABLED,
TMC_CURRENT,
TMC_RMS_CURRENT,
TMC_MAX_CURRENT,
TMC_IRUN,
TMC_IHOLD,
TMC_CS_ACTUAL,
TMC_PWM_SCALE,
TMC_VSENSE,
TMC_STEALTHCHOP,
TMC_MICROSTEPS,
TMC_TSTEP,
TMC_TPWMTHRS,
TMC_TPWMTHRS_MMS,
TMC_OTPW,
TMC_OTPW_TRIGGERED,
TMC_TOFF,
TMC_TBL,
TMC_HEND,
TMC_HSTRT,
TMC_SGT
};
Make enums into implicit char
2018-03-07 04:50:29 +01:00
enum TMC_drv_status_enum : char {
Updates to TMC support
2018-01-10 02:05:37 +01:00
TMC_DRV_CODES,
TMC_STST,
TMC_OLB,
TMC_OLA,
TMC_S2GB,
TMC_S2GA,
TMC_DRV_OTPW,
TMC_OT,
TMC_STALLGUARD,
TMC_DRV_CS_ACTUAL,
TMC_FSACTIVE,
TMC_SG_RESULT,
TMC_DRV_STATUS_HEX,
TMC_T157,
TMC_T150,
TMC_T143,
TMC_T120,
TMC_STEALTH,
TMC_S2VSB,
TMC_S2VSA
};
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
static void drv_status_print_hex(const TMC_AxisEnum axis, const uint32_t drv_status) {
_tmc_say_axis(axis);
Updates to TMC support
2018-01-10 02:05:37 +01:00
SERIAL_ECHOPGM(" = 0x");
for (int B = 24; B >= 8; B -= 8){
SERIAL_PRINT((drv_status >> (B + 4)) & 0xF, HEX);
SERIAL_PRINT((drv_status >> B) & 0xF, HEX);
SERIAL_CHAR(':');
}
SERIAL_PRINT((drv_status >> 4) & 0xF, HEX);
SERIAL_PRINT((drv_status) & 0xF, HEX);
SERIAL_EOL();
}
#if ENABLED(HAVE_TMC2130)
static void tmc_status(TMC2130Stepper &st, const TMC_debug_enum i) {
switch(i) {
case TMC_PWM_SCALE: SERIAL_PRINT(st.PWM_SCALE(), DEC); break;
case TMC_TSTEP: SERIAL_ECHO(st.TSTEP()); break;
case TMC_SGT: SERIAL_PRINT(st.sgt(), DEC); break;
case TMC_STEALTHCHOP: serialprintPGM(st.stealthChop() ? PSTR("true") : PSTR("false")); break;
default: break;
}
}
static void tmc_parse_drv_status(TMC2130Stepper &st, const TMC_drv_status_enum i) {
switch(i) {
case TMC_STALLGUARD: if (st.stallguard()) SERIAL_CHAR('X'); break;
case TMC_SG_RESULT: SERIAL_PRINT(st.sg_result(), DEC); break;
case TMC_FSACTIVE: if (st.fsactive()) SERIAL_CHAR('X'); break;
default: break;
}
}
#endif
#if ENABLED(HAVE_TMC2208)
static void tmc_status(TMC2208Stepper &st, const TMC_debug_enum i) {
switch(i) {
Support DISTINCT_E_FACTORS in tmc_util.cpp
2018-03-07 01:34:43 +01:00
case TMC_TSTEP: { uint32_t data = 0; st.TSTEP(&data); SERIAL_PROTOCOL(data); break; }
Updates to TMC support
2018-01-10 02:05:37 +01:00
case TMC_PWM_SCALE: SERIAL_PRINT(st.pwm_scale_sum(), DEC); break;
case TMC_STEALTHCHOP: serialprintPGM(st.stealth() ? PSTR("true") : PSTR("false")); break;
case TMC_S2VSA: if (st.s2vsa()) SERIAL_CHAR('X'); break;
case TMC_S2VSB: if (st.s2vsb()) SERIAL_CHAR('X'); break;
default: break;
}
}
static void tmc_parse_drv_status(TMC2208Stepper &st, const TMC_drv_status_enum i) {
switch(i) {
case TMC_T157: if (st.t157()) SERIAL_CHAR('X'); break;
case TMC_T150: if (st.t150()) SERIAL_CHAR('X'); break;
case TMC_T143: if (st.t143()) SERIAL_CHAR('X'); break;
case TMC_T120: if (st.t120()) SERIAL_CHAR('X'); break;
default: break;
}
}
#endif
template <typename TMC>
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
static void tmc_status(TMC &st, const TMC_AxisEnum axis, const TMC_debug_enum i, const float spmm) {
Updates to TMC support
2018-01-10 02:05:37 +01:00
SERIAL_ECHO('\t');
switch(i) {
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
case TMC_CODES: _tmc_say_axis(axis); break;
Updates to TMC support
2018-01-10 02:05:37 +01:00
case TMC_ENABLED: serialprintPGM(st.isEnabled() ? PSTR("true") : PSTR("false")); break;
case TMC_CURRENT: SERIAL_ECHO(st.getCurrent()); break;
[1.1.x] Enable Z axis and delta sensorless homing (#9532)
2018-02-08 09:02:48 +01:00
case TMC_RMS_CURRENT: SERIAL_PROTOCOL(st.rms_current()); break;
Updates to TMC support
2018-01-10 02:05:37 +01:00
case TMC_MAX_CURRENT: SERIAL_PRINT((float)st.rms_current() * 1.41, 0); break;
case TMC_IRUN:
SERIAL_PRINT(st.irun(), DEC);
SERIAL_ECHOPGM("/31");
break;
case TMC_IHOLD:
SERIAL_PRINT(st.ihold(), DEC);
SERIAL_ECHOPGM("/31");
break;
case TMC_CS_ACTUAL:
SERIAL_PRINT(st.cs_actual(), DEC);
SERIAL_ECHOPGM("/31");
break;
case TMC_VSENSE: serialprintPGM(st.vsense() ? PSTR("1=.18") : PSTR("0=.325")); break;
case TMC_MICROSTEPS: SERIAL_ECHO(st.microsteps()); break;
case TMC_TPWMTHRS: {
uint32_t tpwmthrs_val = st.TPWMTHRS();
SERIAL_ECHO(tpwmthrs_val);
}
break;
case TMC_TPWMTHRS_MMS: {
uint32_t tpwmthrs_val = st.TPWMTHRS();
tpwmthrs_val ? SERIAL_ECHO(12650000UL * st.microsteps() / (256 * tpwmthrs_val * spmm)) : SERIAL_CHAR('-');
}
break;
case TMC_OTPW: serialprintPGM(st.otpw() ? PSTR("true") : PSTR("false")); break;
case TMC_OTPW_TRIGGERED: serialprintPGM(st.getOTPW() ? PSTR("true") : PSTR("false")); break;
case TMC_TOFF: SERIAL_PRINT(st.toff(), DEC); break;
case TMC_TBL: SERIAL_PRINT(st.blank_time(), DEC); break;
case TMC_HEND: SERIAL_PRINT(st.hysterisis_end(), DEC); break;
case TMC_HSTRT: SERIAL_PRINT(st.hysterisis_start(), DEC); break;
default: tmc_status(st, i); break;
}
}
template <typename TMC>
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
static void tmc_parse_drv_status(TMC &st, const TMC_AxisEnum axis, const TMC_drv_status_enum i) {
Updates to TMC support
2018-01-10 02:05:37 +01:00
SERIAL_CHAR('\t');
switch(i) {
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
case TMC_DRV_CODES: _tmc_say_axis(axis); break;
Updates to TMC support
2018-01-10 02:05:37 +01:00
case TMC_STST: if (st.stst()) SERIAL_CHAR('X'); break;
case TMC_OLB: if (st.olb()) SERIAL_CHAR('X'); break;
case TMC_OLA: if (st.ola()) SERIAL_CHAR('X'); break;
case TMC_S2GB: if (st.s2gb()) SERIAL_CHAR('X'); break;
case TMC_S2GA: if (st.s2ga()) SERIAL_CHAR('X'); break;
case TMC_DRV_OTPW: if (st.otpw()) SERIAL_CHAR('X'); break;
case TMC_OT: if (st.ot()) SERIAL_CHAR('X'); break;
Support DISTINCT_E_FACTORS in tmc_util.cpp
2018-03-07 01:34:43 +01:00
case TMC_DRV_CS_ACTUAL: SERIAL_PRINT(st.cs_actual(), DEC); break;
Move extended_axis_codes to PROGMEM
2018-03-07 04:03:57 +01:00
case TMC_DRV_STATUS_HEX:drv_status_print_hex(axis, st.DRV_STATUS()); break;
Updates to TMC support
2018-01-10 02:05:37 +01:00
default: tmc_parse_drv_status(st, i); break;
}
}
static void tmc_debug_loop(const TMC_debug_enum i) {
#if X_IS_TRINAMIC
tmc_status(stepperX, TMC_X, i, planner.axis_steps_per_mm[X_AXIS]);
#endif
#if X2_IS_TRINAMIC
tmc_status(stepperX2, TMC_X2, i, planner.axis_steps_per_mm[X_AXIS]);
#endif
#if Y_IS_TRINAMIC
tmc_status(stepperY, TMC_Y, i, planner.axis_steps_per_mm[Y_AXIS]);
#endif
#if Y2_IS_TRINAMIC
tmc_status(stepperY2, TMC_Y2, i, planner.axis_steps_per_mm[Y_AXIS]);
#endif
#if Z_IS_TRINAMIC
tmc_status(stepperZ, TMC_Z, i, planner.axis_steps_per_mm[Z_AXIS]);
#endif
#if Z2_IS_TRINAMIC
tmc_status(stepperZ2, TMC_Z2, i, planner.axis_steps_per_mm[Z_AXIS]);
#endif
#if E0_IS_TRINAMIC
tmc_status(stepperE0, TMC_E0, i, planner.axis_steps_per_mm[E_AXIS]);
#endif
#if E1_IS_TRINAMIC
Support DISTINCT_E_FACTORS in tmc_util.cpp
2018-03-07 01:34:43 +01:00
tmc_status(stepperE1, TMC_E1, i, planner.axis_steps_per_mm[E_AXIS
#if ENABLED(DISTINCT_E_FACTORS)
+ 1
#endif
]);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
#if E2_IS_TRINAMIC
Support DISTINCT_E_FACTORS in tmc_util.cpp
2018-03-07 01:34:43 +01:00
tmc_status(stepperE2, TMC_E2, i, planner.axis_steps_per_mm[E_AXIS
#if ENABLED(DISTINCT_E_FACTORS)
+ 2
#endif
]);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
#if E3_IS_TRINAMIC
Support DISTINCT_E_FACTORS in tmc_util.cpp
2018-03-07 01:34:43 +01:00
tmc_status(stepperE3, TMC_E3, i, planner.axis_steps_per_mm[E_AXIS
#if ENABLED(DISTINCT_E_FACTORS)
+ 3
#endif
]);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
#if E4_IS_TRINAMIC
Support DISTINCT_E_FACTORS in tmc_util.cpp
2018-03-07 01:34:43 +01:00
tmc_status(stepperE4, TMC_E4, i, planner.axis_steps_per_mm[E_AXIS
#if ENABLED(DISTINCT_E_FACTORS)
+ 4
#endif
]);
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif
SERIAL_EOL();
}
static void drv_status_loop(const TMC_drv_status_enum i) {
#if X_IS_TRINAMIC
tmc_parse_drv_status(stepperX, TMC_X, i);
#endif
#if X2_IS_TRINAMIC
tmc_parse_drv_status(stepperX2, TMC_X2, i);
#endif
#if Y_IS_TRINAMIC
tmc_parse_drv_status(stepperY, TMC_Y, i);
#endif
#if Y2_IS_TRINAMIC
tmc_parse_drv_status(stepperY2, TMC_Y2, i);
#endif
#if Z_IS_TRINAMIC
tmc_parse_drv_status(stepperZ, TMC_Z, i);
#endif
#if Z2_IS_TRINAMIC
tmc_parse_drv_status(stepperZ2, TMC_Z2, i);
#endif
#if E0_IS_TRINAMIC
tmc_parse_drv_status(stepperE0, TMC_E0, i);
#endif
#if E1_IS_TRINAMIC
tmc_parse_drv_status(stepperE1, TMC_E1, i);
#endif
#if E2_IS_TRINAMIC
tmc_parse_drv_status(stepperE2, TMC_E2, i);
#endif
#if E3_IS_TRINAMIC
tmc_parse_drv_status(stepperE3, TMC_E3, i);
#endif
#if E4_IS_TRINAMIC
tmc_parse_drv_status(stepperE4, TMC_E4, i);
#endif
SERIAL_EOL();
}
/**
* M122 report functions
*/
void tmc_set_report_status(const bool status) {
if ((report_tmc_status = status))
SERIAL_ECHOLNPGM("axis:pwm_scale |status_response|");
}
void tmc_report_all() {
#define TMC_REPORT(LABEL, ITEM) do{ SERIAL_ECHOPGM(LABEL); tmc_debug_loop(ITEM); }while(0)
#define DRV_REPORT(LABEL, ITEM) do{ SERIAL_ECHOPGM(LABEL); drv_status_loop(ITEM); }while(0)
TMC_REPORT("\t", TMC_CODES);
TMC_REPORT("Enabled\t", TMC_ENABLED);
TMC_REPORT("Set current", TMC_CURRENT);
TMC_REPORT("RMS current", TMC_RMS_CURRENT);
TMC_REPORT("MAX current", TMC_MAX_CURRENT);
TMC_REPORT("Run current", TMC_IRUN);
TMC_REPORT("Hold current", TMC_IHOLD);
TMC_REPORT("CS actual\t", TMC_CS_ACTUAL);
TMC_REPORT("PWM scale", TMC_PWM_SCALE);
TMC_REPORT("vsense\t", TMC_VSENSE);
TMC_REPORT("stealthChop", TMC_STEALTHCHOP);
TMC_REPORT("msteps\t", TMC_MICROSTEPS);
TMC_REPORT("tstep\t", TMC_TSTEP);
TMC_REPORT("pwm\nthreshold\t", TMC_TPWMTHRS);
TMC_REPORT("[mm/s]\t", TMC_TPWMTHRS_MMS);
TMC_REPORT("OT prewarn", TMC_OTPW);
TMC_REPORT("OT prewarn has\n"
"been triggered", TMC_OTPW_TRIGGERED);
TMC_REPORT("off time\t", TMC_TOFF);
TMC_REPORT("blank time", TMC_TBL);
TMC_REPORT("hysterisis\n-end\t", TMC_HEND);
TMC_REPORT("-start\t", TMC_HSTRT);
TMC_REPORT("Stallguard thrs", TMC_SGT);
DRV_REPORT("DRVSTATUS", TMC_DRV_CODES);
#if ENABLED(HAVE_TMC2130)
DRV_REPORT("stallguard\t", TMC_STALLGUARD);
DRV_REPORT("sg_result\t", TMC_SG_RESULT);
DRV_REPORT("fsactive\t", TMC_FSACTIVE);
#endif
DRV_REPORT("stst\t", TMC_STST);
DRV_REPORT("olb\t", TMC_OLB);
DRV_REPORT("ola\t", TMC_OLA);
DRV_REPORT("s2gb\t", TMC_S2GB);
DRV_REPORT("s2ga\t", TMC_S2GA);
DRV_REPORT("otpw\t", TMC_DRV_OTPW);
DRV_REPORT("ot\t", TMC_OT);
#if ENABLED(HAVE_TMC2208)
DRV_REPORT("157C\t", TMC_T157);
DRV_REPORT("150C\t", TMC_T150);
DRV_REPORT("143C\t", TMC_T143);
DRV_REPORT("120C\t", TMC_T120);
DRV_REPORT("s2vsa\t", TMC_S2VSA);
DRV_REPORT("s2vsb\t", TMC_S2VSB);
#endif
DRV_REPORT("Driver registers:", TMC_DRV_STATUS_HEX);
SERIAL_EOL();
}
#endif // TMC_DEBUG
#if ENABLED(SENSORLESS_HOMING)
void tmc_sensorless_homing(TMC2130Stepper &st, bool enable/*=true*/) {
#if ENABLED(STEALTHCHOP)
st.coolstep_min_speed(enable ? 1024UL * 1024UL - 1UL : 0);
st.stealthChop(!enable);
#endif
st.diag1_stall(enable ? 1 : 0);
}
#endif // SENSORLESS_HOMING
Init CS pins before loading settings
2018-02-10 18:16:08 +01:00
#if ENABLED(HAVE_TMC2130)
#define SET_CS_PIN(st) OUT_WRITE(st##_CS_PIN, HIGH)
void tmc_init_cs_pins() {
#if ENABLED(X_IS_TMC2130)
SET_CS_PIN(X);
#endif
#if ENABLED(Y_IS_TMC2130)
SET_CS_PIN(Y);
#endif
#if ENABLED(Z_IS_TMC2130)
SET_CS_PIN(Z);
#endif
#if ENABLED(X2_IS_TMC2130)
SET_CS_PIN(X2);
#endif
#if ENABLED(Y2_IS_TMC2130)
SET_CS_PIN(Y2);
#endif
#if ENABLED(Z2_IS_TMC2130)
SET_CS_PIN(Z2);
#endif
#if ENABLED(E0_IS_TMC2130)
SET_CS_PIN(E0);
#endif
#if ENABLED(E1_IS_TMC2130)
SET_CS_PIN(E1);
#endif
#if ENABLED(E2_IS_TMC2130)
SET_CS_PIN(E2);
#endif
#if ENABLED(E3_IS_TMC2130)
SET_CS_PIN(E3);
#endif
#if ENABLED(E4_IS_TMC2130)
SET_CS_PIN(E4);
#endif
}
#endif // HAVE_TMC2130
Updates to TMC support
2018-01-10 02:05:37 +01:00
#endif // HAS_TRINAMIC
Reference in New Issue Copy Permalink