From 081ab35e82a47886504324c30c1984aa5ec83086 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Sun, 4 Mar 2018 21:13:23 -0600
Subject: [PATCH] Remove some trailing whitespace

---
 Marlin/I2CPositionEncoder.cpp                          |  2 +-
 Marlin/Marlin_main.cpp                                 |  2 +-
 .../Creality/Ender-4/Configuration.h                   | 10 +++++-----
 .../delta/Hatchbox_Alpha/Configuration.h               |  7 +++----
 4 files changed, 10 insertions(+), 11 deletions(-)

diff --git a/Marlin/I2CPositionEncoder.cpp b/Marlin/I2CPositionEncoder.cpp
index 22f8f100e..03c886e3a 100644
--- a/Marlin/I2CPositionEncoder.cpp
+++ b/Marlin/I2CPositionEncoder.cpp
@@ -180,7 +180,7 @@
             errPrst[errPrstIdx++] = error; // Error must persist for I2CPE_ERR_PRST_ARRAY_SIZE error cycles. This also serves to improve the average accuracy
             if (errPrstIdx >= I2CPE_ERR_PRST_ARRAY_SIZE) {
               float sumP = 0;
-              LOOP_L_N(i, I2CPE_ERR_PRST_ARRAY_SIZE) sumP += errPrst[i]; 
+              LOOP_L_N(i, I2CPE_ERR_PRST_ARRAY_SIZE) sumP += errPrst[i];
               const int32_t errorP = int32_t(sumP * (1.0 / (I2CPE_ERR_PRST_ARRAY_SIZE)));
               SERIAL_ECHO(axis_codes[encoderAxis]);
               SERIAL_ECHOPAIR(" - err detected: ", errorP * planner.steps_to_mm[encoderAxis]);
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 1423a64f2..a493ff780 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -3475,7 +3475,7 @@ inline void gcode_G4() {
    */
   inline void gcode_G10() {
     #if EXTRUDERS > 1
-      const bool rs = parser.boolval('S');      
+      const bool rs = parser.boolval('S');
     #endif
     fwretract.retract(true
       #if EXTRUDERS > 1
diff --git a/Marlin/example_configurations/Creality/Ender-4/Configuration.h b/Marlin/example_configurations/Creality/Ender-4/Configuration.h
index fb3b67efc..1f583f407 100644
--- a/Marlin/example_configurations/Creality/Ender-4/Configuration.h
+++ b/Marlin/example_configurations/Creality/Ender-4/Configuration.h
@@ -416,17 +416,17 @@
 #if ENABLED(PIDTEMPBED)
 
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
-  
- //Ender-4
+
+  // Ender-4
   #define  DEFAULT_bedKp 426.68
   #define  DEFAULT_bedKi 78.92
   #define  DEFAULT_bedKd 576.71
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-//  #define  DEFAULT_bedKp 10.00
-//  #define  DEFAULT_bedKi .023
-//  #define  DEFAULT_bedKd 305.4
+  //#define  DEFAULT_bedKp 10.00
+  //#define  DEFAULT_bedKi .023
+  //#define  DEFAULT_bedKd 305.4
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from pidautotune
diff --git a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
index cae83e5ea..58d45995c 100644
--- a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
+++ b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
@@ -388,7 +388,7 @@
   //#define  DEFAULT_Kp 63.0
   //#define  DEFAULT_Ki 2.25
   //#define  DEFAULT_Kd 440
-  
+
   // E3D-v6
   #define  DEFAULT_Kp 18.55
   #define  DEFAULT_Ki 2.71
@@ -433,13 +433,12 @@
   //#define  DEFAULT_bedKp 97.1
   //#define  DEFAULT_bedKi 1.41
   //#define  DEFAULT_bedKd 1675.16
-  
+
   //HatchBox Alpha
   #define  DEFAULT_bedKp 72.11
   #define  DEFAULT_bedKi 7.1
   #define  DEFAULT_bedKd 488.31
-  
-  
+
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #endif // PIDTEMPBED