MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge pull request #4693 from thinkyhead/rc_pins_cleanup_aug23

Browse Source 
Cleanup of pins files, Conditionals
This commit is contained in:
Scott Lahteine 2016-08-25 21:35:36 -05:00 committed by GitHub
commit 0c892357a7
35 changed files with 1563 additions and 1044 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/Conditionals_LCD.h
View File

@ -22,7 +22,7 @@
/** /**
* Conditionals_LCD.h * Conditionals_LCD.h
* LCD Defines that depend on configuration but are not editable. * Conditionals that need to be set before Configuration_adv.h or pins.h
*/ */
#ifndef CONDITIONALS_LCD_H // Get the LCD defines which are needed first #ifndef CONDITIONALS_LCD_H // Get the LCD defines which are needed first
@ -316,4 +316,6 @@
#define TOOL_E_INDEX current_block->active_extruder #define TOOL_E_INDEX current_block->active_extruder
#endif #endif
#define PROBE_SELECTED (ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_ENDSTOP || ENABLED(Z_PROBE_SLED))
#endif //CONDITIONALS_LCD_H #endif //CONDITIONALS_LCD_H

2
Marlin/Conditionals_post.h
View File

@ -586,8 +586,6 @@
#endif #endif
#endif #endif
#define PROBE_SELECTED (ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_ENDSTOP || ENABLED(Z_PROBE_SLED))
#define PROBE_PIN_CONFIGURED (HAS_Z_MIN_PROBE_PIN || (HAS_Z_MIN && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN))) #define PROBE_PIN_CONFIGURED (HAS_Z_MIN_PROBE_PIN || (HAS_Z_MIN && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)))
#define HAS_BED_PROBE (PROBE_SELECTED && PROBE_PIN_CONFIGURED) #define HAS_BED_PROBE (PROBE_SELECTED && PROBE_PIN_CONFIGURED)

4
Marlin/example_configurations/Hephestos/Configuration.h
View File

@ -517,11 +517,11 @@
// Setting the wrong pin may have unexpected and potentially disastrous consequences. // Setting the wrong pin may have unexpected and potentially disastrous consequences.
// Use with caution and do your homework. // Use with caution and do your homework.
// //
//#define Z_MIN_PROBE_ENDSTOP #define Z_MIN_PROBE_ENDSTOP
// Enable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to use the Z_MIN_PIN for your Z_MIN_PROBE. // Enable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to use the Z_MIN_PIN for your Z_MIN_PROBE.
// The Z_MIN_PIN will then be used for both Z-homing and probing. // The Z_MIN_PIN will then be used for both Z-homing and probing.
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
// To use a probe you must enable one of the two options above! // To use a probe you must enable one of the two options above!

4
Marlin/example_configurations/Hephestos_2/Configuration.h
View File

@ -519,11 +519,11 @@
// Setting the wrong pin may have unexpected and potentially disastrous consequences. // Setting the wrong pin may have unexpected and potentially disastrous consequences.
// Use with caution and do your homework. // Use with caution and do your homework.
// //
//#define Z_MIN_PROBE_ENDSTOP #define Z_MIN_PROBE_ENDSTOP
// Enable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to use the Z_MIN_PIN for your Z_MIN_PROBE. // Enable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to use the Z_MIN_PIN for your Z_MIN_PROBE.
// The Z_MIN_PIN will then be used for both Z-homing and probing. // The Z_MIN_PIN will then be used for both Z-homing and probing.
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
// To use a probe you must enable one of the two options above! // To use a probe you must enable one of the two options above!

47
Marlin/pins_3DRAG.h
View File

@ -42,20 +42,35 @@
#include "pins_RAMPS.h" #include "pins_RAMPS.h"
#define HEATER_2_PIN 6 //
// Limit Switches
#undef Z_ENABLE_PIN //
#define Z_ENABLE_PIN 63
#undef Z_MAX_PIN #undef Z_MAX_PIN
#define Z_MAX_PIN -1 #define Z_MAX_PIN -1
//
// Steppers
//
#undef Z_ENABLE_PIN
#define Z_ENABLE_PIN 63
//
// SD Card
//
#undef SDSS #undef SDSS
#define SDSS 25//53 #define SDSS 25//53
//
// Heaters / Fans
//
#define HEATER_2_PIN 6
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
#undef BEEPER_PIN #undef BEEPER_PIN
#define BEEPER_PIN -1 #define BEEPER_PIN -1
#undef LCD_PINS_RS #undef LCD_PINS_RS
#undef LCD_PINS_ENABLE #undef LCD_PINS_ENABLE
@ -63,23 +78,23 @@
#undef LCD_PINS_D5 #undef LCD_PINS_D5
#undef LCD_PINS_D6 #undef LCD_PINS_D6
#undef LCD_PINS_D7 #undef LCD_PINS_D7
#define LCD_PINS_RS 27 #define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 29 #define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 37 #define LCD_PINS_D4 37
#define LCD_PINS_D5 35 #define LCD_PINS_D5 35
#define LCD_PINS_D6 33 #define LCD_PINS_D6 33
#define LCD_PINS_D7 31 #define LCD_PINS_D7 31
// Buttons // Buttons
#undef BTN_EN1 #undef BTN_EN1
#undef BTN_EN2 #undef BTN_EN2
#undef BTN_ENC #undef BTN_ENC
#define BTN_EN1 16 #define BTN_EN1 16
#define BTN_EN2 17 #define BTN_EN2 17
#define BTN_ENC 23 #define BTN_ENC 23
#else #else
#define BEEPER_PIN 33 #define BEEPER_PIN 33
#endif // ULTRA_LCD && NEWPANEL #endif // ULTRA_LCD && NEWPANEL

58
Marlin/pins_5DPRINT.h
View File

@ -35,45 +35,59 @@
#define LARGE_FLASH true #define LARGE_FLASH true
//
// Limit Switches
//
#define X_STOP_PIN 37
#define Y_STOP_PIN 36
#define Z_STOP_PIN 39
//
// Steppers
//
#define X_STEP_PIN 0 #define X_STEP_PIN 0
#define X_DIR_PIN 1 #define X_DIR_PIN 1
#define X_ENABLE_PIN 23 #define X_ENABLE_PIN 23
#define X_STOP_PIN 37
#define Y_STEP_PIN 2 #define Y_STEP_PIN 2
#define Y_DIR_PIN 3 #define Y_DIR_PIN 3
#define Y_ENABLE_PIN 19 #define Y_ENABLE_PIN 19
#define Y_STOP_PIN 36
#define Z_STEP_PIN 4 #define Z_STEP_PIN 4
#define Z_DIR_PIN 5 #define Z_DIR_PIN 5
#define Z_ENABLE_PIN 18 #define Z_ENABLE_PIN 18
#define Z_STOP_PIN 39
#define E0_STEP_PIN 6 #define E0_STEP_PIN 6
#define E0_DIR_PIN 7 #define E0_DIR_PIN 7
#define E0_ENABLE_PIN 17 #define E0_ENABLE_PIN 17
#define HEATER_0_PIN 21 // Extruder // Microstepping pins - Mapping not from fastio.h (?)
#define HEATER_BED_PIN 20 // Bed #define X_MS1_PIN 25
#define X_MS2_PIN 26
#define Y_MS1_PIN 9
#define Y_MS2_PIN 8
#define Z_MS1_PIN 7
#define Z_MS2_PIN 6
#define E0_MS1_PIN 5
#define E0_MS2_PIN 4
//
// Temperature Sensors
//
#define TEMP_0_PIN 1 // Analog
#define TEMP_BED_PIN 0 // Analog
//
// Heaters / Fans
//
#define HEATER_0_PIN 21
#define HEATER_BED_PIN 20
// You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h // You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h
// for the fan and Teensyduino uses a different pin mapping. // for the fan and Teensyduino uses a different pin mapping.
#define FAN_PIN 16 // Fan #define FAN_PIN 16
#define TEMP_0_PIN 1 // Extruder / Analog pin numbering //
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering // SD Card
//
// The SDSS pin uses a different pin mapping from file fastio.h
#define SDSS 20 #define SDSS 20
// Microstepping pins
// Note that the pin mapping is not from fastio.h
// See Sd2PinMap.h for the pin configurations ???
#define X_MS1_PIN 25
#define X_MS2_PIN 26
#define Y_MS1_PIN 9
#define Y_MS2_PIN 8
#define Z_MS1_PIN 7
#define Z_MS2_PIN 6
#define E0_MS1_PIN 5
#define E0_MS2_PIN 4

43
Marlin/pins_99.h
View File

@ -23,31 +23,46 @@
/** /**
* Board 99 pin assignments * Board 99 pin assignments
*/ */
#define BOARD_NAME "99 Unknown" #define BOARD_NAME "99 Unknown"
//
// Limit Switches
//
#define X_STOP_PIN 16
#define Y_STOP_PIN 67
#define Z_STOP_PIN 59
//
// Steppers
//
#define X_STEP_PIN 2 #define X_STEP_PIN 2
#define X_DIR_PIN 3 #define X_DIR_PIN 3
#define X_ENABLE_PIN -1 #define X_ENABLE_PIN -1
#define X_STOP_PIN 16
#define Y_STEP_PIN 5 #define Y_STEP_PIN 5
#define Y_DIR_PIN 6 #define Y_DIR_PIN 6
#define Y_ENABLE_PIN -1 #define Y_ENABLE_PIN -1
#define Y_STOP_PIN 67
#define Z_STEP_PIN 62 #define Z_STEP_PIN 62
#define Z_DIR_PIN 63 #define Z_DIR_PIN 63
#define Z_ENABLE_PIN -1 #define Z_ENABLE_PIN -1
#define Z_STOP_PIN 59
#define E0_STEP_PIN 65 #define E0_STEP_PIN 65
#define E0_DIR_PIN 66 #define E0_DIR_PIN 66
#define E0_ENABLE_PIN -1 #define E0_ENABLE_PIN -1
//
// Temperature Sensors
//
#define TEMP_0_PIN 6 // ANALOG INPUT - NOT DIGITAL OUTPUT
#define TEMP_BED_PIN 10
//
// Heaters / Fans
//
#define HEATER_0_PIN 13
#define HEATER_BED_PIN 4
#define SDSS 53 #define SDSS 53
#define PS_ON_PIN 9 #define PS_ON_PIN 9
#define HEATER_0_PIN 13
#define TEMP_0_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define HEATER_BED_PIN 4
#define TEMP_BED_PIN 10

155
Marlin/pins_A4JP.h
View File

@ -30,39 +30,15 @@
#define BOARD_NAME "AJ4P" #define BOARD_NAME "AJ4P"
// Servo support //
// Servos
//
#define SERVO0_PIN 22 // Motor header MX1 #define SERVO0_PIN 22 // Motor header MX1
#define SERVO1_PIN 23 // Motor header MX2 #define SERVO1_PIN 23 // Motor header MX2
#define SERVO2_PIN 24 // Motor header MX3 #define SERVO2_PIN 24 // Motor header MX3
#define SERVO3_PIN 5 // PWM header pin 5 #define SERVO3_PIN 5 // PWM header pin 5
#if ENABLED(Z_PROBE_SLED) #define SLED_PIN -1
#define SLED_PIN -1
#endif
//Fan_2 2
/*****************
#if ENABLED(ULTRA_LCD)
#define KILL_PIN -1 //was 80 Glen maybe a mistake
#endif // ULTRA_LCD */
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 44
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 70
#define DOGLCD_CS 71
#define LCD_SCREEN_ROT_180
#define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
#if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 22
#define STAT_LED_BLUE 32
#endif
#endif // VIKI2/miniVIKI
#define FILWIDTH_PIN 3 // ANALOG NUMBERING #define FILWIDTH_PIN 3 // ANALOG NUMBERING
@ -71,57 +47,81 @@
************************************************/ ************************************************/
#define LARGE_FLASH true #define LARGE_FLASH true
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_MIN_PIN 12
#define X_MAX_PIN 24
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_MIN_PIN 11
#define Y_MAX_PIN 23
#define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_MIN_PIN 10
#define Z_MAX_PIN 30
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define HEATER_BED_PIN 3 //
#define TEMP_BED_PIN 7 //2014/02/04 0:T0 / 1:T1 / 2:T2 / 7:T3 // Limit Switches
#define HEATER_0_PIN 9 //
#define TEMP_0_PIN 0 #define X_MIN_PIN 12
#define HEATER_1_PIN 7 #define X_MAX_PIN 24
#define Y_MIN_PIN 11
#define Y_MAX_PIN 23
#define Z_MIN_PIN 10
#define Z_MAX_PIN 30
#define E0_STEP_PIN 34 //
#define E0_DIR_PIN 43 // Z Probe (when not Z_MIN_PIN)
#define E0_ENABLE_PIN 26 //
#define E0_MS1_PIN 65 #ifndef Z_MIN_PROBE_PIN
#define E0_MS2_PIN 66 #define Z_MIN_PROBE_PIN 30
#define E1_STEP_PIN 33 #endif
#define E1_DIR_PIN 42
#define E1_ENABLE_PIN 25
#define E1_MS1_PIN 63
#define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38 //
// Steppers
//
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_STEP_PIN 33
#define E1_DIR_PIN 42
#define E1_ENABLE_PIN 25
#define E1_MS1_PIN 63
#define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping #define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
//
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 7
#define HEATER_BED_PIN 3
#define FAN_PIN 8
#define FAN0_PIN 6
#define FAN1_PIN 2
#define TEMP_0_PIN 0
#define TEMP_BED_PIN 7
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 8
#define PS_ON_PIN 4 #define PS_ON_PIN 4
#define FAN_0_PIN 6 //Glen
#define FAN_1_PIN 2 //Glen
// 2015/12/23
//
// LCD / Controller
//
#define LCD_PINS_RS 70 //ext2_5 #define LCD_PINS_RS 70 //ext2_5
#define LCD_PINS_ENABLE 71 //ext2_7 #define LCD_PINS_ENABLE 71 //ext2_7
#define LCD_PINS_D4 72 ///////Ext2 9 ? #define LCD_PINS_D4 72 ///////Ext2 9 ?
@ -139,3 +139,18 @@
#define BTN_DOWN 85 //ext2_6 #define BTN_DOWN 85 //ext2_6
#define HOME_PIN BTN_HOME #define HOME_PIN BTN_HOME
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 44
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 70
#define DOGLCD_CS 71
#define LCD_SCREEN_ROT_180
#define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
#if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 22
#define STAT_LED_BLUE 32
#endif
#endif // VIKI2/miniVIKI

84
Marlin/pins_AZTEEG_X3_PRO.h
View File

@ -28,21 +28,16 @@
#include "pins_RAMPS.h" #include "pins_RAMPS.h"
#undef FAN_PIN
#define FAN_PIN 6 //Part Cooling System
#undef BEEPER_PIN
#define BEEPER_PIN 33
#define CONTROLLERFAN_PIN 4 //Pin used for the fan to cool motherboard (-1 to disable)
//Fans/Water Pump to cool the hotend cool side.
#define EXTRUDER_0_AUTO_FAN_PIN 5
#define EXTRUDER_1_AUTO_FAN_PIN 5
#define EXTRUDER_2_AUTO_FAN_PIN 5
#define EXTRUDER_3_AUTO_FAN_PIN 5
// //
//This section is to swap the MIN and MAX pins because the X3 Pro comes with only // Tested this pin with bed leveling on a Delta with 1 servo.
//MIN endstops soldered onto the board. Delta code wants the homing endstops to be // Physical wire attachment on EXT1: GND, 5V, D47.
//the MAX so I swapped them here. //
#undef SERVO0_PIN
#define SERVO0_PIN 47
//
// Swap the MIN and MAX endstop pins because the X3 Pro comes with only
// MIN endstop pin headers soldered onto the board.
// //
#if ENABLED(DELTA) #if ENABLED(DELTA)
#undef X_MIN_PIN #undef X_MIN_PIN
@ -60,10 +55,16 @@
#define Z_MAX_PIN 18 #define Z_MAX_PIN 18
#endif #endif
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN #ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19 #define Z_MIN_PROBE_PIN 18
#endif #endif
//
// Steppers
//
#define E2_STEP_PIN 23 #define E2_STEP_PIN 23
#define E2_DIR_PIN 25 #define E2_DIR_PIN 25
#define E2_ENABLE_PIN 40 #define E2_ENABLE_PIN 40
@ -76,19 +77,9 @@
#define E4_DIR_PIN 37 #define E4_DIR_PIN 37
#define E4_ENABLE_PIN 42 #define E4_ENABLE_PIN 42
#undef HEATER_1_PIN //
#undef HEATER_2_PIN // Temperature Sensors
#undef HEATER_3_PIN //
#define HEATER_1_PIN 9
#define HEATER_2_PIN 16
#define HEATER_3_PIN 17
#define HEATER_4_PIN 4
#define HEATER_5_PIN 5
#define HEATER_6_PIN 6
#define HEATER_7_PIN 11
#undef TEMP_2_PIN
#undef TEMP_3_PIN
#define TEMP_2_PIN 12 // ANALOG NUMBERING #define TEMP_2_PIN 12 // ANALOG NUMBERING
#define TEMP_3_PIN 11 // ANALOG NUMBERING #define TEMP_3_PIN 11 // ANALOG NUMBERING
#define TEMP_4_PIN 10 // ANALOG NUMBERING #define TEMP_4_PIN 10 // ANALOG NUMBERING
@ -96,17 +87,36 @@
#define TC2 5 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro #define TC2 5 // ANALOG NUMBERING Thermo couple on Azteeg X3Pro
// //
// These Servo pins are for when they are defined. Tested for usage with bed leveling // Heaters / Fans
// on a Delta with 1 servo. Running through the Z servo endstop in code.
// Physical wire attachment was done on EXT1 on the GND, 5V, and D47 pins.
// //
#undef SERVO0_PIN #define HEATER_2_PIN 16
#define SERVO0_PIN 47 #define HEATER_3_PIN 17
#define HEATER_4_PIN 4
#define HEATER_5_PIN 5
#define HEATER_6_PIN 6
#define HEATER_7_PIN 11
#undef FAN_PIN
#define FAN_PIN 6 //Part Cooling System
#define CONTROLLERFAN_PIN 4 //Pin used for the fan to cool motherboard (-1 to disable)
// Fans/Water Pump to cool the hotend cool side.
#define EXTRUDER_0_AUTO_FAN_PIN 5
#define EXTRUDER_1_AUTO_FAN_PIN 5
#define EXTRUDER_2_AUTO_FAN_PIN 5
#define EXTRUDER_3_AUTO_FAN_PIN 5
//
// LCD / Controller
//
#undef BEEPER_PIN
#define BEEPER_PIN 33
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#undef SD_DETECT_PIN #undef SD_DETECT_PIN
#define SD_DETECT_PIN 49 // For easy adapter board #define SD_DETECT_PIN 49 // For easy adapter board
#elif ENABLED(TEMP_STAT_LEDS) #else
#define STAT_LED_RED 32 #define STAT_LED_RED 32
#define STAT_LED_BLUE 35 #define STAT_LED_BLUE 35
#endif #endif

10
Marlin/pins_BQ_ZUM_MEGA_3D.h
View File

@ -40,6 +40,9 @@
#undef X_MAX_PIN #undef X_MAX_PIN
#define X_MAX_PIN 79 // 2 #define X_MAX_PIN 79 // 2
#undef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19 // IND_S_5V
#undef Z_ENABLE_PIN #undef Z_ENABLE_PIN
#define Z_ENABLE_PIN 77 // 62 #define Z_ENABLE_PIN 77 // 62
@ -54,10 +57,3 @@
#undef PS_ON_PIN // 12 #undef PS_ON_PIN // 12
#define PS_ON_PIN 81 // External Power Supply #define PS_ON_PIN 81 // External Power Supply
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
#undef Z_MIN_PIN
#undef Z_MAX_PIN
#define Z_MIN_PIN 19 // IND_S_5V
#define Z_MAX_PIN 18 // Z-MIN Label
#endif

25
Marlin/pins_BRAINWAVE.h
View File

@ -33,22 +33,29 @@
#define BOARD_NAME "Brainwave" #define BOARD_NAME "Brainwave"
//
// Limit Switches
//
#define X_STOP_PIN 7
#define Y_STOP_PIN 6
#define Z_STOP_PIN 5
//
// Steppers
//
#define X_STEP_PIN 27 #define X_STEP_PIN 27
#define X_DIR_PIN 29 #define X_DIR_PIN 29
#define X_ENABLE_PIN 28 #define X_ENABLE_PIN 28
#define X_STOP_PIN 7
#define X_ATT_PIN 26 #define X_ATT_PIN 26
#define Y_STEP_PIN 31 #define Y_STEP_PIN 31
#define Y_DIR_PIN 33 #define Y_DIR_PIN 33
#define Y_ENABLE_PIN 32 #define Y_ENABLE_PIN 32
#define Y_STOP_PIN 6
#define Y_ATT_PIN 30 #define Y_ATT_PIN 30
#define Z_STEP_PIN 17 #define Z_STEP_PIN 17
#define Z_DIR_PIN 19 #define Z_DIR_PIN 19
#define Z_ENABLE_PIN 18 #define Z_ENABLE_PIN 18
#define Z_STOP_PIN 5
#define Z_ATT_PIN 16 #define Z_ATT_PIN 16
#define E0_STEP_PIN 21 #define E0_STEP_PIN 21
@ -56,11 +63,17 @@
#define E0_ENABLE_PIN 22 #define E0_ENABLE_PIN 22
#define E0_ATT_PIN 20 #define E0_ATT_PIN 20
//
// Temperature Sensors
//
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering
//
// Heaters / Fans
//
#define HEATER_0_PIN 4 // Extruder #define HEATER_0_PIN 4 // Extruder
#define HEATER_BED_PIN 38 // Bed #define HEATER_BED_PIN 38 // Bed
#define FAN_PIN 3 // Fan #define FAN_PIN 3 // Fan
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define LED_PIN 39 #define LED_PIN 39

30
Marlin/pins_BRAINWAVE_PRO.h
View File

@ -41,13 +41,23 @@
#define LARGE_FLASH true #define LARGE_FLASH true
//
// Limit Switches
//
#define X_STOP_PIN 47 #define X_STOP_PIN 47
#define Y_STOP_PIN 18 #define Y_STOP_PIN 18
#define Z_MAX_PIN 36 #define Z_MAX_PIN 36
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN #ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 17 #define Z_MIN_PROBE_PIN 17
#endif #endif
//
// Steppers
//
#define X_STEP_PIN 33 #define X_STEP_PIN 33
#define X_DIR_PIN 32 #define X_DIR_PIN 32
#define X_ENABLE_PIN 11 #define X_ENABLE_PIN 11
@ -64,14 +74,24 @@
#define E0_DIR_PIN 34 #define E0_DIR_PIN 34
#define E0_ENABLE_PIN 13 #define E0_ENABLE_PIN 13
#define HEATER_0_PIN 15 //
#define HEATER_BED_PIN 14 // Bed // Temperature Sensors
#define FAN_PIN 16 // Fan, PWM //
#define TEMP_0_PIN 2 // Extruder / Analog pin numbering #define TEMP_0_PIN 2 // Extruder / Analog pin numbering
#define TEMP_1_PIN 1 // Spare / Analog pin numbering #define TEMP_1_PIN 1 // Spare / Analog pin numbering
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering #define TEMP_BED_PIN 0 // Bed / Analog pin numbering
//
// Heaters / Fans
//
#define HEATER_0_PIN 15
#define HEATER_BED_PIN 14 // Bed
#define FAN_PIN 16 // Fan, PWM
//
// LCD / Controller
//
#define SDSS 20 #define SDSS 20
#define LED_PIN 19
#define SD_DETECT_PIN 12 #define SD_DETECT_PIN 12
#define LED_PIN 19

88
Marlin/pins_CHEAPTRONIC.h
View File

@ -31,57 +31,59 @@
#define BOARD_NAME "Cheaptronic v1.0" #define BOARD_NAME "Cheaptronic v1.0"
#define LARGE_FLASH true #define LARGE_FLASH true
// X motor stepper //
#define X_STEP_PIN 14 // Limit Switches
#define X_DIR_PIN 15 //
#define X_ENABLE_PIN 24 #define X_STOP_PIN 3
#define Y_STOP_PIN 2
#define Z_STOP_PIN 5
// Y motor stepper //
#define Y_STEP_PIN 35 // Steppers
#define Y_DIR_PIN 36 //
#define Y_ENABLE_PIN 31 #define X_STEP_PIN 14
#define X_DIR_PIN 15
#define X_ENABLE_PIN 24
// Z motor stepper #define Y_STEP_PIN 35
#define Z_STEP_PIN 40 #define Y_DIR_PIN 36
#define Z_DIR_PIN 41 #define Y_ENABLE_PIN 31
#define Z_ENABLE_PIN 37
// XYZ endstops #define Z_STEP_PIN 40
#define X_STOP_PIN 3 #define Z_DIR_PIN 41
#define Y_STOP_PIN 2 #define Z_ENABLE_PIN 37
#define Z_STOP_PIN 5
// Extruder 0 stepper #define E0_STEP_PIN 26
#define E0_STEP_PIN 26 #define E0_DIR_PIN 28
#define E0_DIR_PIN 28 #define E0_ENABLE_PIN 25
#define E0_ENABLE_PIN 25
// Extruder 1 stepper #define E1_STEP_PIN 33
#define E1_STEP_PIN 33 #define E1_DIR_PIN 34
#define E1_DIR_PIN 34 #define E1_ENABLE_PIN 30
#define E1_ENABLE_PIN 30
#define HEATER_0_PIN 19 // EXTRUDER 1
#define HEATER_1_PIN 23 // EXTRUDER 2
#define HEATER_BED_PIN 22
//
// Temperature sensors // Temperature sensors
#define TEMP_0_PIN 15 //
#define TEMP_1_PIN 14 #define TEMP_0_PIN 15
#define TEMP_BED_PIN 13 #define TEMP_1_PIN 14
#define TEMP_BED_PIN 13
//
// Heaters / Fans
//
#define HEATER_0_PIN 19 // EXTRUDER 1
#define HEATER_1_PIN 23 // EXTRUDER 2
#define HEATER_BED_PIN 22
// Cheaptronic v1.0 doesn't support LCD // Cheaptronic v1.0 doesn't support LCD
#define LCD_PINS_RS -1 #define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1 #define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1 #define LCD_PINS_D4 -1
#define LCD_PINS_D5 -1 #define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1 #define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1 #define LCD_PINS_D7 -1
// Cheaptronic v1.0 doesn't support keypad // Cheaptronic v1.0 doesn't support keypad
#define BTN_EN1 -1 #define BTN_EN1 -1
#define BTN_EN2 -1 #define BTN_EN2 -1
#define BTN_ENC -1 #define BTN_ENC -1
// Cheaptronic v1.0 doesn't use this

134
Marlin/pins_CNCONTROLS_11.h
View File

@ -6,54 +6,65 @@
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif #endif
#define BOARD_NAME "CN Controls V11" #define BOARD_NAME "CN Controls V11"
//#define LARGE_FLASH true //#define LARGE_FLASH true
#define X_ENABLE_PIN 35 //
#define X_STEP_PIN 34 // Limit Switches
#define X_DIR_PIN 36 //
#define X_MIN_PIN 43 #define X_STOP_PIN 43
#define X_MAX_PIN -1 #define Y_STOP_PIN 45
#define Z_STOP_PIN 42
#define Y_ENABLE_PIN 38 //
#define Y_STEP_PIN 37 // Steppers
#define Y_DIR_PIN 39 //
#define Y_MIN_PIN 45 #define X_STEP_PIN 34
#define Y_MAX_PIN -1 #define X_DIR_PIN 36
#define X_ENABLE_PIN 35
#define Z_ENABLE_PIN 41 #define Y_STEP_PIN 37
#define Z_STEP_PIN 40 #define Y_DIR_PIN 39
#define Z_DIR_PIN 48 #define Y_ENABLE_PIN 38
#define Z_MIN_PIN 42
#define Z_MAX_PIN -1
#define E0_ENABLE_PIN 3 #define Z_STEP_PIN 40
#define E0_STEP_PIN 29 #define Z_DIR_PIN 48
#define E0_DIR_PIN 28 #define Z_ENABLE_PIN 41
#define HEATER_0_PIN 5
#define TEMP_0_PIN 0 // ANALOG INPUT !!
#define E1_ENABLE_PIN 60 #define E0_STEP_PIN 29
#define E1_STEP_PIN 61 #define E0_DIR_PIN 28
#define E1_DIR_PIN 62 #define E0_ENABLE_PIN 3
#define HEATER_1_PIN 58
#define TEMP_1_PIN 3 // 3 for tool2 -> 2 for chambertemp
#define E2_ENABLE_PIN 16 #define E1_STEP_PIN 61
#define E2_STEP_PIN 15 #define E1_DIR_PIN 62
#define E2_DIR_PIN 14 #define E1_ENABLE_PIN 60
#define HEATER_2_PIN 64
#define TEMP_2_PIN 2 // 9 for tool3 -> 2 for chambertemp
#define E3_ENABLE_PIN 47 #define E2_STEP_PIN 15
#define E3_STEP_PIN 44 #define E2_DIR_PIN 14
#define E3_DIR_PIN 49 #define E2_ENABLE_PIN 16
#define HEATER_3_PIN 46
#define TEMP_3_PIN 11 // 11 for tool4 -> 2 for chambertemp
#define HEATER_BED_PIN 2 #define E3_STEP_PIN 44
#define TEMP_BED_PIN 1 // ANALOG INPUT !! #define E3_DIR_PIN 49
#define E3_ENABLE_PIN 47
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // ANALOG INPUT !!
#define TEMP_1_PIN 3 // 3 for tool2 -> 2 for chambertemp
#define TEMP_2_PIN 2 // 9 for tool3 -> 2 for chambertemp
#define TEMP_3_PIN 11 // 11 for tool4 -> 2 for chambertemp
#define TEMP_BED_PIN 1 // ANALOG INPUT !!
//
// Heaters / Fans
//
#define HEATER_0_PIN 5
#define HEATER_1_PIN 58
#define HEATER_2_PIN 64
#define HEATER_3_PIN 46
#define HEATER_BED_PIN 2
// Tools // Tools
@ -72,30 +83,37 @@
//#define SPARE_IO 12 //#define SPARE_IO 12
//#define FAN_PIN 7 // common PWM pin for all tools //#define FAN_PIN 7 // common PWM pin for all tools
// User interface //
#define BEEPER_PIN 6 // SD Card
//
#define SDSS 53
#define SD_DETECT_PIN 13
//
// LCD / Controller
//
#define BEEPER_PIN 6
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 26 #define DOGLCD_A0 26
#define DOGLCD_CS 24 #define DOGLCD_CS 24
#define DOGLCD_MOSI -1 #define DOGLCD_MOSI -1
#define DOGLCD_SCK -1 #define DOGLCD_SCK -1
// The encoder and click button #define BTN_EN1 23
#define BTN_EN1 23 #define BTN_EN2 25
#define BTN_EN2 25 #define BTN_ENC 27
#define BTN_ENC 27
// Hardware buttons for manual movement of XYZ // Hardware buttons for manual movement of XYZ
#define SHIFT_OUT 19 #define SHIFT_OUT 19
#define SHIFT_LD 18 #define SHIFT_LD 18
#define SHIFT_CLK 17 #define SHIFT_CLK 17
//#define UI1 31 //#define UI1 31
//#define UI2 22 //#define UI2 22
// Other //
#define SDSS 53 // Misc. Functions
#define SD_DETECT_PIN 13 //
#define STAT_LED_BLUE -1 #define STAT_LED_BLUE -1
#define STAT_LED_RED 31 #define STAT_LED_RED 31

159
Marlin/pins_CNCONTROLS_12.h
View File

@ -10,96 +10,115 @@
//#define LARGE_FLASH true //#define LARGE_FLASH true
#define X_ENABLE_PIN 26 //
#define X_STEP_PIN 25 // Limit Switches
#define X_DIR_PIN 27 //
#define X_MIN_PIN 19 #define X_STOP_PIN 19
#define X_MAX_PIN -1 #define Y_STOP_PIN 22
#define Z_STOP_PIN 23
#define Y_ENABLE_PIN 29 //
#define Y_STEP_PIN 28 // Steppers
#define Y_DIR_PIN 30 //
#define Y_MIN_PIN 22 #define X_STEP_PIN 25
#define Y_MAX_PIN -1 #define X_DIR_PIN 27
#define X_ENABLE_PIN 26
#define Z_ENABLE_PIN 32 #define Y_STEP_PIN 28
#define Z_STEP_PIN 31 #define Y_DIR_PIN 30
#define Z_DIR_PIN 33 #define Y_ENABLE_PIN 29
#define Z_MIN_PIN 23
#define Z_MAX_PIN -1
#define E0_ENABLE_PIN 58 #define Z_STEP_PIN 31
#define E0_STEP_PIN 57 #define Z_DIR_PIN 33
#define E0_DIR_PIN 55 #define Z_ENABLE_PIN 32
#define HEATER_0_PIN 11
#define TEMP_0_PIN 0 // ANALOG INPUT !!
#define E1_ENABLE_PIN 60 #define E0_STEP_PIN 57
#define E1_STEP_PIN 61 #define E0_DIR_PIN 55
#define E1_DIR_PIN 62 #define E0_ENABLE_PIN 58
#define HEATER_1_PIN 9
#define TEMP_1_PIN 9 // 9 for tool2 -> 13 for chambertemp
#define E2_ENABLE_PIN 44 #define E1_STEP_PIN 61
#define E2_STEP_PIN 46 #define E1_DIR_PIN 62
#define E2_DIR_PIN 66 #define E1_ENABLE_PIN 60
#define HEATER_2_PIN 6
#define TEMP_2_PIN 13 // 10 for tool3 -> 13 for chambertemp
#define E3_ENABLE_PIN 47 #define E2_STEP_PIN 46
#define E3_STEP_PIN 45 #define E2_DIR_PIN 66
#define E3_DIR_PIN 69 #define E2_ENABLE_PIN 44
#define HEATER_3_PIN 3
#define TEMP_3_PIN 11 // 11 for tool4 -> 13 for chambertemp
#define HEATER_BED_PIN 24 #define E3_STEP_PIN 45
#define TEMP_BED_PIN 14 // ANALOG INPUT !! #define E3_DIR_PIN 69
#define E3_ENABLE_PIN 47
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // ANALOG INPUT !!
#define TEMP_1_PIN 9 // 9 for tool2 -> 13 for chambertemp
#define TEMP_2_PIN 13 // 10 for tool3 -> 13 for chambertemp
#define TEMP_3_PIN 11 // 11 for tool4 -> 13 for chambertemp
#define TEMP_BED_PIN 14 // ANALOG INPUT !!
//#define TEMP_CHAMBER_PIN 13 // ANALOG INPUT !!
//
// Heaters / Fans
//
#define HEATER_0_PIN 11
#define HEATER_1_PIN 9
#define HEATER_2_PIN 6
#define HEATER_3_PIN 3
#define HEATER_BED_PIN 24
#define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
//#define PWM_1_PIN 12
//#define PWM_2_PIN 13
//#define SPARE_IO 17
// Tools // Tools
//#define TOOL_0_PIN 56 //#define TOOL_0_PIN 56
//#define TOOL_0_PWM_PIN 10 // red warning led at dual extruder //#define TOOL_0_PWM_PIN 10 // red warning led at dual extruder
//#define TOOL_1_PIN 59 //#define TOOL_1_PIN 59
//#define TOOL_1_PWM_PIN 8 // lights at dual extruder //#define TOOL_1_PWM_PIN 8 // lights at dual extruder
//#define TOOL_2_PIN 4 //#define TOOL_2_PIN 4
//#define TOOL_2_PWM_PIN 5 //#define TOOL_2_PWM_PIN 5
//#define TOOL_3_PIN 14 //#define TOOL_3_PIN 14
//#define TOOL_3_PWM_PIN 2 //#define TOOL_3_PWM_PIN 2
// Common I/O // Common I/O
//#define TEMP_CHAMBER_PIN 13 // ANALOG INPUT !! //
#define FIL_RUNOUT_PIN 18 // LCD / Controller
//#define PWM_1_PIN 12 //
//#define PWM_2_PIN 13 #define BEEPER_PIN 16
//#define SPARE_IO 17
#define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
// User interface
#define BEEPER_PIN 16
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 39 #define DOGLCD_A0 39
#define DOGLCD_CS 35 #define DOGLCD_CS 35
#define DOGLCD_MOSI 48 #define DOGLCD_MOSI 48
#define DOGLCD_SCK 49 #define DOGLCD_SCK 49
#define LCD_SCREEN_ROT_180 #define LCD_SCREEN_ROT_180
// The encoder and click button // The encoder and click button
#define BTN_EN1 36 #define BTN_EN1 36
#define BTN_EN2 34 #define BTN_EN2 34
#define BTN_ENC 38 #define BTN_ENC 38
// Hardware buttons for manual movement of XYZ // Hardware buttons for manual movement of XYZ
#define SHIFT_OUT 42 #define SHIFT_OUT 42
#define SHIFT_LD 41 #define SHIFT_LD 41
#define SHIFT_CLK 40 #define SHIFT_CLK 40
//#define UI1 43 //#define UI1 43
//#define UI2 37 //#define UI2 37
#define STAT_LED_BLUE -1
#define STAT_LED_RED 10 // TOOL_0_PWM_PIN
//
// SD Card
//
#define SDSS 53
#define SD_DETECT_PIN 15
// Other // Other
#define SDSS 53 #define FIL_RUNOUT_PIN 18
#define SD_DETECT_PIN 15
#define STAT_LED_BLUE -1
#define STAT_LED_RED 10 // TOOL_0_PWM_PIN

82
Marlin/pins_ELEFU_3.h
View File

@ -28,58 +28,82 @@
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu." #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif #endif
#define BOARD_NAME "Elefu Ra v3" #define BOARD_NAME "Elefu Ra v3"
//
// Limit Switches
//
#define X_MIN_PIN 35
#define X_MAX_PIN 34
#define Y_MIN_PIN 33
#define Y_MAX_PIN 32
#define Z_MIN_PIN 31
#define Z_MAX_PIN 30
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 30
#endif
//
// Steppers
//
#define X_STEP_PIN 49 #define X_STEP_PIN 49
#define X_DIR_PIN 13 #define X_DIR_PIN 13
#define X_ENABLE_PIN 48 #define X_ENABLE_PIN 48
#define X_MIN_PIN 35
#define X_MAX_PIN 34
#define Y_STEP_PIN 11 #define Y_STEP_PIN 11
#define Y_DIR_PIN 9 #define Y_DIR_PIN 9
#define Y_ENABLE_PIN 12 #define Y_ENABLE_PIN 12
#define Y_MIN_PIN 33
#define Y_MAX_PIN 32
#define Z_STEP_PIN 7 #define Z_STEP_PIN 7
#define Z_DIR_PIN 6 #define Z_DIR_PIN 6
#define Z_ENABLE_PIN 8 #define Z_ENABLE_PIN 8
#define Z_MIN_PIN 31
#define Z_MAX_PIN 30
#define E2_STEP_PIN 43
#define E2_DIR_PIN 47
#define E2_ENABLE_PIN 42
#define E1_STEP_PIN 18
#define E1_DIR_PIN 19
#define E1_ENABLE_PIN 38
#define E0_STEP_PIN 40 #define E0_STEP_PIN 40
#define E0_DIR_PIN 41 #define E0_DIR_PIN 41
#define E0_ENABLE_PIN 37 #define E0_ENABLE_PIN 37
#define FAN_PIN 16 //5V PWM #define E1_STEP_PIN 18
#define E1_DIR_PIN 19
#define E1_ENABLE_PIN 38
#define PS_ON_PIN 10 //Set to -1 if using a manual switch on the PWRSW Connector #define E2_STEP_PIN 43
#define SLEEP_WAKE_PIN 26 //This feature still needs work #define E2_DIR_PIN 47
#define E2_ENABLE_PIN 42
#define HEATER_0_PIN 45 //12V PWM1 //
#define HEATER_1_PIN 46 //12V PWM2 // Temperature Sensors
#define HEATER_2_PIN 17 //12V PWM3 //
#define HEATER_BED_PIN 44 //DOUBLE 12V PWM #define TEMP_0_PIN 3 // ANALOG NUMBERING
#define TEMP_0_PIN 3 //ANALOG NUMBERING #define TEMP_1_PIN 2 // ANALOG NUMBERING
#define TEMP_1_PIN 2 //ANALOG NUMBERING #define TEMP_2_PIN 1 // ANALOG NUMBERING
#define TEMP_2_PIN 1 //ANALOG NUMBERING #define TEMP_BED_PIN 0 // ANALOG NUMBERING
#define TEMP_BED_PIN 0 //ANALOG NUMBERING
#define BEEPER_PIN 36 //
// Heaters / Fans
//
#define HEATER_0_PIN 45 // 12V PWM1
#define HEATER_1_PIN 46 // 12V PWM2
#define HEATER_2_PIN 17 // 12V PWM3
#define HEATER_BED_PIN 44 // DOUBLE 12V PWM
// M240 Triggers a camera by emulating a Canon RC-1 Remote #define FAN_PIN 16 // 5V PWM
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
//
// Misc. Functions
//
#define PS_ON_PIN 10 // Set to -1 if using a manual switch on the PWRSW Connector
#define SLEEP_WAKE_PIN 26 // This feature still needs work
#define PHOTOGRAPH_PIN 29 #define PHOTOGRAPH_PIN 29
//
// LCD / Controller
//
#define BEEPER_PIN 36
#if ENABLED(RA_CONTROL_PANEL) #if ENABLED(RA_CONTROL_PANEL)
#define SDSS 53 #define SDSS 53

62
Marlin/pins_GEN3_MONOLITHIC.h
View File

@ -31,39 +31,45 @@
#define BOARD_NAME "Gen3 Monolithic" #define BOARD_NAME "Gen3 Monolithic"
#define DEBUG_PIN 0 #define DEBUG_PIN 0
// x axis //
#define X_STEP_PIN 15 // Limit Switches
#define X_DIR_PIN 18 //
#define X_MIN_PIN 20 #define X_STOP_PIN 20
// Alex Checar #define X_STOP_PIN 20 #define Y_STOP_PIN 25
#define X_ENABLE_PIN 24 // actually uses Y_enable_pin #define Z_STOP_PIN 30
#define X_MAX_PIN -1
// y axis //
#define Y_STEP_PIN 23 // Steppers
#define Y_DIR_PIN 22 //
#define Y_MIN_PIN 25 #define X_STEP_PIN 15
// Alex Checar #define Y_STOP_PIN 25 #define X_DIR_PIN 18
#define Y_ENABLE_PIN 24 // shared with X_enable_pin #define X_ENABLE_PIN 24 // actually uses Y_enable_pin
#define Y_MAX_PIN -1
// z axis #define Y_STEP_PIN 23
#define Z_STEP_PIN 27 #define Y_DIR_PIN 22
#define Z_DIR_PIN 28 #define Y_ENABLE_PIN 24 // shared with X_enable_pin
#define Z_MIN_PIN 30
// Alex Checar #define Z_STOP_PIN 30
#define Z_ENABLE_PIN 29
#define Z_MAX_PIN -1
// extruder pins #define Z_STEP_PIN 27
#define E0_STEP_PIN 12 #define Z_DIR_PIN 28
#define E0_DIR_PIN 17 #define Z_ENABLE_PIN 29
#define E0_STEP_PIN 12
#define E0_DIR_PIN 17
#define E0_ENABLE_PIN 3 #define E0_ENABLE_PIN 3
#define HEATER_0_PIN 16 //
#define TEMP_0_PIN 0 // Temperature Sensors
//
#define TEMP_0_PIN 0
// pin for controlling the PSU. //
#define PS_ON_PIN 14 // Alex, Do this work on the card? // Heaters
//
#define HEATER_0_PIN 16
//
// Etc.
//
#define PS_ON_PIN 14 // Alex, does this work on the card?
// Alex extras from Gen3+ // Alex extras from Gen3+

46
Marlin/pins_GEN3_PLUS.h
View File

@ -30,31 +30,47 @@
#define BOARD_NAME "Gen3+" #define BOARD_NAME "Gen3+"
//
// Limit Switches
//
#define X_STOP_PIN 20
#define Y_STOP_PIN 25
#define Z_STOP_PIN 30
//
// Steppers
//
#define X_STEP_PIN 15 #define X_STEP_PIN 15
#define X_DIR_PIN 18 #define X_DIR_PIN 18
#define X_STOP_PIN 20 #define X_ENABLE_PIN 19
#define Y_STEP_PIN 23 #define Y_STEP_PIN 23
#define Y_DIR_PIN 22 #define Y_DIR_PIN 22
#define Y_STOP_PIN 25 #define Y_ENABLE_PIN 24
#define Z_STEP_PIN 27 #define Z_STEP_PIN 27
#define Z_DIR_PIN 28 #define Z_DIR_PIN 28
#define Z_STOP_PIN 30 #define Z_ENABLE_PIN 29
#define E0_STEP_PIN 17 #define E0_STEP_PIN 17
#define E0_DIR_PIN 21 #define E0_DIR_PIN 21
#define PS_ON_PIN 14
#define HEATER_0_PIN 12 // (extruder)
#define HEATER_BED_PIN 16 // (bed)
#define X_ENABLE_PIN 19
#define Y_ENABLE_PIN 24
#define Z_ENABLE_PIN 29
#define E0_ENABLE_PIN 13 #define E0_ENABLE_PIN 13
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder) #define PS_ON_PIN 14
#define TEMP_BED_PIN 5 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define SDSS 4 //
// Temperature Sensors
//
#define TEMP_0_PIN 0 // ANALOG INPUT (pin 33 extruder)
#define TEMP_BED_PIN 5 // ANALOG INPUT (pin 34 bed)
//
// Heaters
//
#define HEATER_0_PIN 12
#define HEATER_BED_PIN 16
//
// SD Card
//
#define SDSS 4

73
Marlin/pins_GEN6.h
View File

@ -34,42 +34,57 @@
#define BOARD_NAME "Gen6" #define BOARD_NAME "Gen6"
#endif #endif
//x axis pins //
#define X_STEP_PIN 15 // Limit Switches
#define X_DIR_PIN 18 //
#define X_ENABLE_PIN 19 #define X_STOP_PIN 20
#define X_STOP_PIN 20 #define Y_STOP_PIN 25
#define Z_STOP_PIN 30
//y axis pins //
#define Y_STEP_PIN 23 // Steppers
#define Y_DIR_PIN 22 //
#define Y_ENABLE_PIN 24 #define X_STEP_PIN 15
#define Y_STOP_PIN 25 #define X_DIR_PIN 18
#define X_ENABLE_PIN 19
//z axis pins #define Y_STEP_PIN 23
#define Z_STEP_PIN 27 #define Y_DIR_PIN 22
#define Z_DIR_PIN 28 #define Y_ENABLE_PIN 24
#define Z_ENABLE_PIN 29
#define Z_STOP_PIN 30
//extruder pins #define Z_STEP_PIN 27
#define E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715 #define Z_DIR_PIN 28
#define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715 #define Z_ENABLE_PIN 29
#define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715
#define TEMP_0_PIN 5 //changed @ rkoeppl 20110410
#define HEATER_0_PIN 14 //changed @ rkoeppl 20110410 #define E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715
#define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715
#define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715
//
// Temperature Sensor
//
#define TEMP_0_PIN 5 //changed @ rkoeppl 20110410
//
// Heaters
//
#define HEATER_0_PIN 14 //changed @ rkoeppl 20110410
#if !MB(GEN6) #if !MB(GEN6)
#define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410 #define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410
#define TEMP_BED_PIN 0 //changed @ rkoeppl 20110410 #define TEMP_BED_PIN 0 //changed @ rkoeppl 20110410
#endif #endif
#define SDSS 17 //
//our pin for debugging. // SD Card
//
#define SDSS 17
#define DEBUG_PIN 0 //
// Misc. Functions
//
#define DEBUG_PIN 0
//our RS485 pins // RS485 pins
#define TX_ENABLE_PIN 12 #define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13 #define RX_ENABLE_PIN 13

98
Marlin/pins_GEN7_12.h
View File

@ -36,52 +36,68 @@
#define GEN7_VERSION 12 // v1.x #define GEN7_VERSION 12 // v1.x
#endif #endif
//x axis pins //
#define X_STEP_PIN 19 // Limit Switches
#define X_DIR_PIN 18 //
#define X_ENABLE_PIN 24 #define X_STOP_PIN 7
#define X_STOP_PIN 7 #define Y_STOP_PIN 5
#define Z_MIN_PIN 1
#define Z_MAX_PIN 0
//y axis pins //
#define Y_STEP_PIN 23 // Z Probe (when not Z_MIN_PIN)
#define Y_DIR_PIN 22 //
#define Y_ENABLE_PIN 24 #ifndef Z_MIN_PROBE_PIN
#define Y_STOP_PIN 5 #define Z_MIN_PROBE_PIN 0
//z axis pins
#define Z_STEP_PIN 26
#define Z_DIR_PIN 25
#define Z_ENABLE_PIN 24
#define Z_MIN_PIN 1
#define Z_MAX_PIN 0
//extruder pins
#define E0_STEP_PIN 28
#define E0_DIR_PIN 27
#define E0_ENABLE_PIN 24
#define TEMP_0_PIN 1
#define TEMP_BED_PIN 2
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 3
// Gen7 v1.3 removed the fan pin
#if GEN7_VERSION < 13
#define FAN_PIN 31
#endif #endif
#define PS_ON_PIN 15 //
// Steppers
//
#define X_STEP_PIN 19
#define X_DIR_PIN 18
#define X_ENABLE_PIN 24
//All these generations of Gen7 supply thermistor power #define Y_STEP_PIN 23
//via PS_ON, so ignore bad thermistor readings #define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24
#define Z_STEP_PIN 26
#define Z_DIR_PIN 25
#define Z_ENABLE_PIN 24
#define E0_STEP_PIN 28
#define E0_DIR_PIN 27
#define E0_ENABLE_PIN 24
//
// Temperature Sensors
//
#define TEMP_0_PIN 1
#define TEMP_BED_PIN 2
//
// Heaters / Fans
//
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 3
#if GEN7_VERSION < 13 // Gen7 v1.3 removed the fan pin
#define FAN_PIN 31
#endif
//
// Misc. Functions
//
#define PS_ON_PIN 15
// All these generations of Gen7 supply thermistor power
// via PS_ON, so ignore bad thermistor readings
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE #define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
//our pin for debugging. #define DEBUG_PIN 0
#define DEBUG_PIN 0
//our RS485 pins // RS485 pins
#define TX_ENABLE_PIN 12 #define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13 #define RX_ENABLE_PIN 13

57
Marlin/pins_LEAPFROG.h
View File

@ -30,44 +30,63 @@
#define BOARD_NAME "Leapfrog" #define BOARD_NAME "Leapfrog"
//
// Limit Switches
//
#define X_MIN_PIN 47
#define X_MAX_PIN 2
#define Y_MIN_PIN 48
#define Y_MAX_PIN 15
#define Z_MIN_PIN 49
#define Z_MAX_PIN -1
//
// Steppers
//
#define X_STEP_PIN 28 #define X_STEP_PIN 28
#define X_DIR_PIN 63 #define X_DIR_PIN 63
#define X_ENABLE_PIN 29 #define X_ENABLE_PIN 29
#define X_MIN_PIN 47
#define X_MAX_PIN 2 //Max endstops default to disabled "-1", set to commented value to enable.
#define Y_STEP_PIN 14 // A6 #define Y_STEP_PIN 14 // A6
#define Y_DIR_PIN 15 // A0 #define Y_DIR_PIN 15 // A0
#define Y_ENABLE_PIN 39 #define Y_ENABLE_PIN 39
#define Y_MIN_PIN 48
#define Y_MAX_PIN 15
#define Z_STEP_PIN 31 // A2 #define Z_STEP_PIN 31 // A2
#define Z_DIR_PIN 32 // A6 #define Z_DIR_PIN 32 // A6
#define Z_ENABLE_PIN 30 // A1 #define Z_ENABLE_PIN 30 // A1
#define Z_MIN_PIN 49
#define Z_MAX_PIN -1
#define E0_STEP_PIN 34 //34 #define E0_STEP_PIN 34 // 34
#define E0_DIR_PIN 35 //35 #define E0_DIR_PIN 35 // 35
#define E0_ENABLE_PIN 33 //33 #define E0_ENABLE_PIN 33 // 33
#define E1_STEP_PIN 37 //37 #define E1_STEP_PIN 37 // 37
#define E1_DIR_PIN 40 //40 #define E1_DIR_PIN 40 // 40
#define E1_ENABLE_PIN 36 //36 #define E1_ENABLE_PIN 36 // 36
//
// Misc. Functions
//
#define SDSS 11 #define SDSS 11
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 7 #define SOL1_PIN 16
#define SOL1_PIN 16 #define SOL2_PIN 17
#define SOL2_PIN 17
#define HEATER_0_PIN 9 //
#define HEATER_1_PIN 8 // 12 // Temperature Sensors
#define HEATER_2_PIN 11 //-1 // 13 //
#define TEMP_0_PIN 13 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_0_PIN 13 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN 15 // 1 #define TEMP_1_PIN 15 // 1
#define HEATER_BED_PIN 10 // 14/15
#define TEMP_BED_PIN 14 // 1,2 or I2C #define TEMP_BED_PIN 14 // 1,2 or I2C
//
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8 // 12
#define HEATER_2_PIN 11 // 13
#define HEATER_BED_PIN 10 // 14/15
#define FAN_PIN 7
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ /* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */

138
Marlin/pins_MEGACONTROLLER.h
View File

@ -34,79 +34,109 @@
#define BOARD_NAME "Mega Controller" #define BOARD_NAME "Mega Controller"
#define SERVO0_PIN 30 //
#define SERVO1_PIN 31 // Servos
#define SERVO2_PIN 32 //
#define SERVO3_PIN 33 #define SERVO0_PIN 30
#define SERVO1_PIN 31
#define SERVO2_PIN 32
#define SERVO3_PIN 33
#define X_STEP_PIN 62//A8 //
#define X_DIR_PIN 63//A9 // Limit Switches
#define X_ENABLE_PIN 61//A7 //
#define X_MIN_PIN 43 #define X_MIN_PIN 43
#define X_MAX_PIN 42 //Max endstops default to disabled "-1", set to commented value to enable. #define X_MAX_PIN 42
#define Y_MIN_PIN 38
#define Y_MAX_PIN 41
#define Z_MIN_PIN 40
#define Z_MAX_PIN 37
#define Y_STEP_PIN 65 // A11 //
#define Y_DIR_PIN 66 // A12 // Z Probe (when not Z_MIN_PIN)
#define Y_ENABLE_PIN 64//A10 //
#define Y_MIN_PIN 38 #ifndef Z_MIN_PROBE_PIN
#define Y_MAX_PIN 41 #define Z_MIN_PROBE_PIN 37
#endif
#define Z_STEP_PIN 68 // A14 //
#define Z_DIR_PIN 69 // A15 // Steppers
#define Z_ENABLE_PIN 67 // A13 //
#define Z_MIN_PIN 40 #define X_STEP_PIN 62 // A8
#define Z_MAX_PIN 37 #define X_DIR_PIN 63 // A9
#define X_ENABLE_PIN 61 // A7
#define E0_STEP_PIN 23 #define Y_STEP_PIN 65 // A11
#define E0_DIR_PIN 24 #define Y_DIR_PIN 66 // A12
#define E0_ENABLE_PIN 22 #define Y_ENABLE_PIN 64 // A10
#define E1_STEP_PIN 26 #define Z_STEP_PIN 68 // A14
#define E1_DIR_PIN 27 #define Z_DIR_PIN 69 // A15
#define E1_ENABLE_PIN 25 #define Z_ENABLE_PIN 67 // A13
#define SDSS 53 #define E0_STEP_PIN 23
#define LED_PIN 13 #define E0_DIR_PIN 24
#define E0_ENABLE_PIN 22
#define FAN_PIN 39 #define E1_STEP_PIN 26
#define FAN1_PIN 35 #define E1_DIR_PIN 27
#define FAN2_PIN 36 #define E1_ENABLE_PIN 25
#define FAN_SOFT_PWM
#define CONTROLLERFAN_PIN FAN2_PIN
#define HEATER_0_PIN 29 // EXTRUDER 1 //
#define HEATER_1_PIN 34 // EXTRUDER 2 // Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
//
// Temperature Sensors
//
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 4 // ANALOG NUMBERING #define TEMP_0_PIN 4 // ANALOG NUMBERING
#else #else
#define TEMP_0_PIN 0 // ANALOG NUMBERING #define TEMP_0_PIN 0 // ANALOG NUMBERING
#endif #endif
#if TEMP_SENSOR_1 == -1 #if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 5 // ANALOG NUMBERING #define TEMP_1_PIN 5 // ANALOG NUMBERING
#else #else
#define TEMP_1_PIN 2 // ANALOG NUMBERING #define TEMP_1_PIN 2 // ANALOG NUMBERING
#endif #endif
#define TEMP_2_PIN 3 // ANALOG NUMBERING #define TEMP_2_PIN 3 // ANALOG NUMBERING
#define HEATER_BED_PIN 28 // BED
#if TEMP_SENSOR_BED == -1 #if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 6 // ANALOG NUMBERING #define TEMP_BED_PIN 6 // ANALOG NUMBERING
#else #else
#define TEMP_BED_PIN 1 // ANALOG NUMBERING #define TEMP_BED_PIN 1 // ANALOG NUMBERING
#endif #endif
#if ENABLED(MINIPANEL) //
#define BEEPER_PIN 46 // Heaters / Fans
// Pins for DOGM SPI LCD Support //
#define DOGLCD_A0 47 #define HEATER_0_PIN 29
#define DOGLCD_CS 45 #define HEATER_1_PIN 34
#define LCD_PIN_BL 44 // backlight LED on PA3 #define HEATER_BED_PIN 28
#define KILL_PIN 12 #define FAN_PIN 39
#define FAN1_PIN 35
#define FAN2_PIN 36
#define CONTROLLERFAN_PIN FAN2_PIN
#define FAN_SOFT_PWM
//
// LCD / Controller
//
#if ENABLED(MINIPANEL)
#define BEEPER_PIN 46
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 47
#define DOGLCD_CS 45
#define LCD_PIN_BL 44 // backlight LED on PA3
#define KILL_PIN 12
// GLCD features // GLCD features
//#define LCD_CONTRAST 190 //#define LCD_CONTRAST 190
// Uncomment screen orientation // Uncomment screen orientation
@ -114,10 +144,10 @@
//#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270 //#define LCD_SCREEN_ROT_270
#define BTN_EN1 48 #define BTN_EN1 48
#define BTN_EN2 11 #define BTN_EN2 11
#define BTN_ENC 10 #define BTN_ENC 10
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#endif // MINIPANEL #endif // MINIPANEL

51
Marlin/pins_MEGATRONICS.h
View File

@ -31,23 +31,37 @@
#define BOARD_NAME "Megatronics" #define BOARD_NAME "Megatronics"
#define LARGE_FLASH true #define LARGE_FLASH true
//
// Limit Switches
//
#define X_MIN_PIN 41
#define X_MAX_PIN 37
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19
#endif
//
// Steppers
//
#define X_STEP_PIN 26 #define X_STEP_PIN 26
#define X_DIR_PIN 28 #define X_DIR_PIN 28
#define X_ENABLE_PIN 24 #define X_ENABLE_PIN 24
#define X_MIN_PIN 41
#define X_MAX_PIN 37
#define Y_STEP_PIN 60 // A6 #define Y_STEP_PIN 60 // A6
#define Y_DIR_PIN 61 // A7 #define Y_DIR_PIN 61 // A7
#define Y_ENABLE_PIN 22 #define Y_ENABLE_PIN 22
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_STEP_PIN 54 // A0 #define Z_STEP_PIN 54 // A0
#define Z_DIR_PIN 55 // A1 #define Z_DIR_PIN 55 // A1
#define Z_ENABLE_PIN 56 // A2 #define Z_ENABLE_PIN 56 // A2
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define E0_STEP_PIN 31 #define E0_STEP_PIN 31
#define E0_DIR_PIN 32 #define E0_DIR_PIN 32
@ -57,16 +71,16 @@
#define E1_DIR_PIN 36 #define E1_DIR_PIN 36
#define E1_ENABLE_PIN 30 #define E1_ENABLE_PIN 30
//
// Misc. Functions
//
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 7 // IO pin. Buffer needed
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#define HEATER_0_PIN 9 //
#define HEATER_1_PIN 8 // Temperature Sensors
#define HEATER_BED_PIN 10 // BED //
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 8 // ANALOG NUMBERING #define TEMP_0_PIN 8 // ANALOG NUMBERING
#else #else
@ -75,7 +89,18 @@
#define TEMP_1_PIN 15 // ANALOG NUMBERING #define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // ANALOG NUMBERING
// AUX-4 //
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8
#define HEATER_BED_PIN 10
#define FAN_PIN 7 // IO pin. Buffer needed
//
// LCD / Controller
//
#define BEEPER_PIN 33 #define BEEPER_PIN 33
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)

123
Marlin/pins_MEGATRONICS_2.h
View File

@ -31,74 +31,101 @@
#define BOARD_NAME "Megatronics v2.0" #define BOARD_NAME "Megatronics v2.0"
#define LARGE_FLASH true #define LARGE_FLASH true
#define X_STEP_PIN 26 //
#define X_DIR_PIN 27 // Limit Switches
#define X_ENABLE_PIN 25 //
#define X_MIN_PIN 37 #define X_MIN_PIN 37
#define X_MAX_PIN 40 #define X_MAX_PIN 40
#define Y_MIN_PIN 41
#define Y_MAX_PIN 38
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define Y_STEP_PIN 4 // A6 //
#define Y_DIR_PIN 54 // A0 // Z Probe (when not Z_MIN_PIN)
#define Y_ENABLE_PIN 5 //
#define Y_MIN_PIN 41 #ifndef Z_MIN_PROBE_PIN
#define Y_MAX_PIN 38 #define Z_MIN_PROBE_PIN 19
#endif
#define Z_STEP_PIN 56 // A2 //
#define Z_DIR_PIN 60 // A6 // Steppers
#define Z_ENABLE_PIN 55 // A1 //
#define Z_MIN_PIN 18 #define X_STEP_PIN 26
#define Z_MAX_PIN 19 #define X_DIR_PIN 27
#define X_ENABLE_PIN 25
#define E0_STEP_PIN 35 #define Y_STEP_PIN 4 // A6
#define E0_DIR_PIN 36 #define Y_DIR_PIN 54 // A0
#define E0_ENABLE_PIN 34 #define Y_ENABLE_PIN 5
#define E1_STEP_PIN 29 #define Z_STEP_PIN 56 // A2
#define E1_DIR_PIN 39 #define Z_DIR_PIN 60 // A6
#define E1_ENABLE_PIN 28 #define Z_ENABLE_PIN 55 // A1
#define E2_STEP_PIN 23 #define E0_STEP_PIN 35
#define E2_DIR_PIN 24 #define E0_DIR_PIN 36
#define E2_ENABLE_PIN 22 #define E0_ENABLE_PIN 34
#define SDSS 53 #define E1_STEP_PIN 29
#define LED_PIN 13 #define E1_DIR_PIN 39
#define E1_ENABLE_PIN 28
#define FAN_PIN 7 #define E2_STEP_PIN 23
#define FAN2_PIN 6 #define E2_DIR_PIN 24
#define PS_ON_PIN 12 #define E2_ENABLE_PIN 22
#define HEATER_0_PIN 9 // EXTRUDER 1 //
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
//
// Temperature Sensors
//
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 4 // ANALOG NUMBERING #define TEMP_0_PIN 4 // ANALOG NUMBERING
#else #else
#define TEMP_0_PIN 13 // ANALOG NUMBERING #define TEMP_0_PIN 13 // ANALOG NUMBERING
#endif #endif
#define HEATER_1_PIN 8 // EXTRUDER 2
#if TEMP_SENSOR_1 == -1 #if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 8 // ANALOG NUMBERING #define TEMP_1_PIN 8 // ANALOG NUMBERING
#else #else
#define TEMP_1_PIN 15 // ANALOG NUMBERING #define TEMP_1_PIN 15 // ANALOG NUMBERING
#endif #endif
#define HEATER_BED_PIN 10 // BED
#if TEMP_SENSOR_BED == -1 #if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 8 // ANALOG NUMBERING #define TEMP_BED_PIN 8 // ANALOG NUMBERING
#else #else
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // ANALOG NUMBERING
#endif #endif
#define BEEPER_PIN 64 //
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8
#define HEATER_BED_PIN 10
#define LCD_PINS_RS 14 #define FAN_PIN 7
#define LCD_PINS_ENABLE 15 #define FAN1_PIN 6
#define LCD_PINS_D4 30
#define LCD_PINS_D5 31 //
#define LCD_PINS_D6 32 // LCD / Controller
#define LCD_PINS_D7 33 //
#define BEEPER_PIN 64
#define LCD_PINS_RS 14
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 30
#define LCD_PINS_D5 31
#define LCD_PINS_D6 32
#define LCD_PINS_D7 33
// Buttons are directly attached using keypad // Buttons are directly attached using keypad
#define BTN_EN1 61 #define BTN_EN1 61
#define BTN_EN2 59 #define BTN_EN2 59
#define BTN_ENC 43 #define BTN_ENC 43

134
Marlin/pins_MEGATRONICS_3.h
View File

@ -38,33 +38,45 @@
#define LARGE_FLASH true #define LARGE_FLASH true
#if ENABLED(Z_PROBE_SLED) //
#define SLED_PIN -1 // Servos
#endif //
// Servo support
#define SERVO0_PIN 46 // AUX3-6 #define SERVO0_PIN 46 // AUX3-6
#define SERVO1_PIN 47 // AUX3-5 #define SERVO1_PIN 47 // AUX3-5
#define SERVO2_PIN 48 // AUX3-4 #define SERVO2_PIN 48 // AUX3-4
#define SERVO3_PIN 49 // AUX3-3 #define SERVO3_PIN 49 // AUX3-3
//
// Limit Switches
//
#define X_MIN_PIN 37
#define X_MAX_PIN 40
#define Y_MIN_PIN 41
#define Y_MAX_PIN 38
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19
#endif
//
// Steppers
//
#define X_STEP_PIN 58 #define X_STEP_PIN 58
#define X_DIR_PIN 57 #define X_DIR_PIN 57
#define X_ENABLE_PIN 59 #define X_ENABLE_PIN 59
#define X_MIN_PIN 37
#define X_MAX_PIN 40
#define Y_STEP_PIN 5 #define Y_STEP_PIN 5
#define Y_DIR_PIN 17 #define Y_DIR_PIN 17
#define Y_ENABLE_PIN 4 #define Y_ENABLE_PIN 4
#define Y_MIN_PIN 41
#define Y_MAX_PIN 38
#define Z_STEP_PIN 16 #define Z_STEP_PIN 16
#define Z_DIR_PIN 11 #define Z_DIR_PIN 11
#define Z_ENABLE_PIN 3 #define Z_ENABLE_PIN 3
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define E0_STEP_PIN 28 #define E0_STEP_PIN 28
#define E0_DIR_PIN 27 #define E0_DIR_PIN 27
@ -78,70 +90,80 @@
#define E2_DIR_PIN 60 #define E2_DIR_PIN 60
#define E2_ENABLE_PIN 23 #define E2_ENABLE_PIN 23
#define SDSS 53 //
#define LED_PIN 13 // Misc. Functions
//
#define PS_ON_PIN 12 #define SDSS 53
#define LED_PIN 13
#define HEATER_0_PIN 2 #define PS_ON_PIN 12
#define HEATER_1_PIN 9 #define SLED_PIN -1
#define HEATER_2_PIN 8
#define HEATER_BED_PIN 10
#define FAN_PIN 6
#define FAN2_PIN 7
//
// Temperature Sensors
//
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 11 // ANALOG NUMBERING #define TEMP_0_PIN 11 // ANALOG NUMBERING
#else #else
#define TEMP_0_PIN 15 // ANALOG NUMBERING #define TEMP_0_PIN 15 // ANALOG NUMBERING
#endif #endif
#if TEMP_SENSOR_1 == -1 #if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 10 // ANALOG NUMBERING #define TEMP_1_PIN 10 // ANALOG NUMBERING
#else #else
#define TEMP_1_PIN 13 // ANALOG NUMBERING #define TEMP_1_PIN 13 // ANALOG NUMBERING
#endif #endif
#if TEMP_SENSOR_2 == -1 #if TEMP_SENSOR_2 == -1
#define TEMP_2_PIN 9 // ANALOG NUMBERING #define TEMP_2_PIN 9 // ANALOG NUMBERING
#else #else
#define TEMP_2_PIN 12 // ANALOG NUMBERING #define TEMP_2_PIN 12 // ANALOG NUMBERING
#endif #endif
#if TEMP_SENSOR_BED == -1 #if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 8 // ANALOG NUMBERING #define TEMP_BED_PIN 8 // ANALOG NUMBERING
#else #else
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // ANALOG NUMBERING
#endif #endif
/** //
* Controllers and LCDs // Heaters / Fans
*/ //
#define BEEPER_PIN 61 #define HEATER_0_PIN 2
#define HEATER_1_PIN 9
#define HEATER_2_PIN 8
#define HEATER_BED_PIN 10
#define BTN_EN1 44 #define FAN_PIN 6
#define BTN_EN2 45 #define FAN1_PIN 7
#define BTN_ENC 33
//
// LCD / Controller
//
#define BEEPER_PIN 61
#define BTN_EN1 44
#define BTN_EN2 45
#define BTN_ENC 33
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 56 // CS chip select / SS chip slave select #define LCD_PINS_RS 56 // CS chip select / SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock #define LCD_PINS_D4 52 // SCK (CLK) clock
#define SD_DETECT_PIN 35 #define SD_DETECT_PIN 35
#else #else
#define LCD_PINS_RS 32 #define LCD_PINS_RS 32
#define LCD_PINS_ENABLE 31 #define LCD_PINS_ENABLE 31
#define LCD_PINS_D4 14 #define LCD_PINS_D4 14
#define LCD_PINS_D5 30 #define LCD_PINS_D5 30
#define LCD_PINS_D6 39 #define LCD_PINS_D6 39
#define LCD_PINS_D7 15 #define LCD_PINS_D7 15
#define SHIFT_CLK 43 #define SHIFT_CLK 43
#define SHIFT_LD 35 #define SHIFT_LD 35
#define SHIFT_OUT 34 #define SHIFT_OUT 34
#define SHIFT_EN 44 #define SHIFT_EN 44
#if ENABLED(MEGATRONICS_31) #if ENABLED(MEGATRONICS_31)
#define SD_DETECT_PIN 56 #define SD_DETECT_PIN 56
#else #else
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1
#endif #endif
#endif #endif

138
Marlin/pins_MINIRAMBO.h
View File

@ -31,52 +31,53 @@
#define BOARD_NAME "Mini Rambo" #define BOARD_NAME "Mini Rambo"
#define LARGE_FLASH true #define LARGE_FLASH true
#define X_STEP_PIN 37 //
#define X_DIR_PIN 48 // Limit Switches
#define X_MIN_PIN 12 //
#define X_MAX_PIN 30 #define X_MIN_PIN 12
#define X_ENABLE_PIN 29 #define X_MAX_PIN 30
#define X_MS1_PIN 40 #define Y_MIN_PIN 11
#define X_MS2_PIN 41 #define Y_MAX_PIN 24
#define Z_MIN_PIN 10
#define Z_MAX_PIN 23
#define Y_STEP_PIN 36 //
#define Y_DIR_PIN 49 // Z Probe (when not Z_MIN_PIN)
#define Y_MIN_PIN 11 //
#define Y_MAX_PIN 24 #ifndef Z_MIN_PROBE_PIN
#define Y_ENABLE_PIN 28 #define Z_MIN_PROBE_PIN 23
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_MIN_PIN 10
#define Z_MAX_PIN 23
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define HEATER_BED_PIN 4
#define TEMP_BED_PIN 2
#define HEATER_0_PIN 3
#define TEMP_0_PIN 0
#define HEATER_1_PIN 7
#define TEMP_1_PIN 1
#if ENABLED(BARICUDA)
#define HEATER_2_PIN 6
#endif #endif
#define E0_STEP_PIN 34 //
#define E0_DIR_PIN 43 // Steppers
#define E0_ENABLE_PIN 26 //
#define E0_MS1_PIN 65 #define X_STEP_PIN 37
#define E0_MS2_PIN 66 #define X_DIR_PIN 48
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define E1_STEP_PIN -1 #define Y_STEP_PIN 36
#define E1_DIR_PIN -1 #define Y_DIR_PIN 49
#define E1_ENABLE_PIN -1 #define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_STEP_PIN -1
#define E1_DIR_PIN -1
#define E1_ENABLE_PIN -1
#define MOTOR_CURRENT_PWM_XY_PIN 46 #define MOTOR_CURRENT_PWM_XY_PIN 46
#define MOTOR_CURRENT_PWM_Z_PIN 45 #define MOTOR_CURRENT_PWM_Z_PIN 45
@ -84,33 +85,56 @@
//Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range //Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#define MOTOR_CURRENT_PWM_RANGE 2000 #define MOTOR_CURRENT_PWM_RANGE 2000
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
#define SDSS 53
#define LED_PIN 13
#define FAN_PIN 8
#define FAN_1_PIN 6
//
// Temperature Sensors
//
#define TEMP_0_PIN 0
#define TEMP_1_PIN 1
#define TEMP_BED_PIN 2
//
// Heaters / Fans
//
#define HEATER_0_PIN 3
#define HEATER_1_PIN 7
#define HEATER_2_PIN 6
#define HEATER_BED_PIN 4
#define FAN_PIN 8
#define FAN1_PIN 6
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#define KILL_PIN 32 #define KILL_PIN 32
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
// Beeper on AUX-4 // Beeper on AUX-4
#define BEEPER_PIN 84 #define BEEPER_PIN 84
#define LCD_PINS_RS 82 #define LCD_PINS_RS 82
#define LCD_PINS_ENABLE 18 #define LCD_PINS_ENABLE 18
#define LCD_PINS_D4 19 #define LCD_PINS_D4 19
#define LCD_PINS_D5 70 #define LCD_PINS_D5 70
#define LCD_PINS_D6 85 #define LCD_PINS_D6 85
#define LCD_PINS_D7 71 #define LCD_PINS_D7 71
//buttons are directly attached using AUX-2 //buttons are directly attached using AUX-2
#define BTN_EN1 14 #define BTN_EN1 14
#define BTN_EN2 72 #define BTN_EN2 72
#define BTN_ENC 9 // the click #define BTN_ENC 9 // the click
#define SD_DETECT_PIN 15 #define SD_DETECT_PIN 15
#endif //NEWPANEL #endif //NEWPANEL
#endif //ULTRA_LCD #endif //ULTRA_LCD

121
Marlin/pins_MINITRONICS.h
View File

@ -28,82 +28,95 @@
#error "Oops! Make sure you have 'Minitronics' selected from the 'Tools -> Boards' menu." #error "Oops! Make sure you have 'Minitronics' selected from the 'Tools -> Boards' menu."
#endif #endif
#if HOTENDS > 2
#error "Minitronics supports up to 2 hotends. Comment this line to keep going."
#endif
#define BOARD_NAME "Minitronics v1.0 / v1.1" #define BOARD_NAME "Minitronics v1.0 / v1.1"
#define LARGE_FLASH true #define LARGE_FLASH true
#define X_STEP_PIN 48 //
#define X_DIR_PIN 47 // Limit Switches
#define X_ENABLE_PIN 49 //
#define X_MIN_PIN 5 #define X_MIN_PIN 5
#define X_MAX_PIN 2 #define X_MAX_PIN 2
#define Y_MIN_PIN 2
#define Y_MAX_PIN 15
#define Z_MIN_PIN 6
#define Z_MAX_PIN -1
#define Y_STEP_PIN 39 // A6 //
#define Y_DIR_PIN 40 // A0 // Steppers
#define Y_ENABLE_PIN 38 //
#define Y_MIN_PIN 2 #define X_STEP_PIN 48
#define Y_MAX_PIN 15 #define X_DIR_PIN 47
#define X_ENABLE_PIN 49
#define Z_STEP_PIN 42 // A2 #define Y_STEP_PIN 39 // A6
#define Z_DIR_PIN 43 // A6 #define Y_DIR_PIN 40 // A0
#define Z_ENABLE_PIN 41 // A1 #define Y_ENABLE_PIN 38
#define Z_MIN_PIN 6
#define Z_MAX_PIN -1
#define E0_STEP_PIN 45 #define Z_STEP_PIN 42 // A2
#define E0_DIR_PIN 44 #define Z_DIR_PIN 43 // A6
#define E0_ENABLE_PIN 27 #define Z_ENABLE_PIN 41 // A1
#define E1_STEP_PIN 36 #define E0_STEP_PIN 45
#define E1_DIR_PIN 35 #define E0_DIR_PIN 44
#define E1_ENABLE_PIN 37 #define E0_ENABLE_PIN 27
#define E2_STEP_PIN -1 #define E1_STEP_PIN 36
#define E2_DIR_PIN -1 #define E1_DIR_PIN 35
#define E2_ENABLE_PIN -1 #define E1_ENABLE_PIN 37
#define SDSS 16 //
#define LED_PIN 46 // Temperature Sensors
//
#define SDSS 16
#define LED_PIN 46
#define FAN_PIN 9 #define TEMP_0_PIN 7 // ANALOG NUMBERING
#define TEMP_1_PIN 6 // ANALOG NUMBERING
#define TEMP_BED_PIN 6 // ANALOG NUMBERING
#define TEMP_0_PIN 7 // ANALOG NUMBERING //
#define TEMP_1_PIN 6 // ANALOG NUMBERING // Heaters / Fans
#define TEMP_BED_PIN 6 // ANALOG NUMBERING //
#define HEATER_0_PIN 7 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_BED_PIN 3 // BED
#define HEATER_0_PIN 7 // EXTRUDER 1 #define FAN_PIN 9
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_BED_PIN 3 // BED
/** //
* Controllers and LCDs // LCD / Controller
*/ //
#define BEEPER_PIN -1 #define BEEPER_PIN -1
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 15 // CS chip select /SS chip slave select #define LCD_PINS_RS 15 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 11 // SID (MOSI) #define LCD_PINS_ENABLE 11 // SID (MOSI)
#define LCD_PINS_D4 10 // SCK (CLK) clock #define LCD_PINS_D4 10 // SCK (CLK) clock
#define BTN_EN1 18 #define BTN_EN1 18
#define BTN_EN2 17 #define BTN_EN2 17
#define BTN_ENC 25 #define BTN_ENC 25
#define SD_DETECT_PIN 30 #define SD_DETECT_PIN 30
#else #else
#define LCD_PINS_RS -1 #define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1 #define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1 #define LCD_PINS_D4 -1
#define LCD_PINS_D5 -1 #define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1 #define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1 #define LCD_PINS_D7 -1
// Buttons are directly attached using keypad // Buttons are directly attached using keypad
#define BTN_EN1 -1 #define BTN_EN1 -1
#define BTN_EN2 -1 #define BTN_EN2 -1
#define BTN_ENC -1 #define BTN_ENC -1
#define SD_DETECT_PIN -1 // Minitronics doesn't use this #define SD_DETECT_PIN -1 // Minitronics doesn't use this
#endif #endif

134
Marlin/pins_RAMBO.h
View File

@ -32,85 +32,97 @@
#define LARGE_FLASH true #define LARGE_FLASH true
// Servo support //
#define SERVO0_PIN 22 // Motor header MX1 // Servos
#define SERVO1_PIN 23 // Motor header MX2 //
#define SERVO2_PIN 24 // Motor header MX3 #define SERVO0_PIN 22 // Motor header MX1
#define SERVO3_PIN 5 // PWM header pin 5 #define SERVO1_PIN 23 // Motor header MX2
#define SERVO2_PIN 24 // Motor header MX3
#define SERVO3_PIN 5 // PWM header pin 5
#if ENABLED(Z_PROBE_SLED) #if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1 #define SLED_PIN -1
#endif #endif
#define X_MIN_PIN 12 //
#define X_MAX_PIN 24 // Limit Switches
#define Y_MIN_PIN 11 //
#define Y_MAX_PIN 23 #define X_MIN_PIN 12
#define Z_MIN_PIN 10 #define X_MAX_PIN 24
#define Z_MAX_PIN 30 #define Y_MIN_PIN 11
#define Y_MAX_PIN 23
#define Z_MIN_PIN 10
#define Z_MAX_PIN 30
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN #ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 10 #define Z_MIN_PROBE_PIN 30
#endif #endif
#define X_STEP_PIN 37 //
#define X_DIR_PIN 48 // Steppers
#define X_ENABLE_PIN 29 //
#define X_MS1_PIN 40 #define X_STEP_PIN 37
#define X_MS2_PIN 41 #define X_DIR_PIN 48
#define X_ENABLE_PIN 29
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_STEP_PIN 36 #define Y_STEP_PIN 36
#define Y_DIR_PIN 49 #define Y_DIR_PIN 49
#define Y_ENABLE_PIN 28 #define Y_ENABLE_PIN 28
#define Y_MS1_PIN 69 #define Y_MS1_PIN 69
#define Y_MS2_PIN 39 #define Y_MS2_PIN 39
#define Z_STEP_PIN 35 #define Z_STEP_PIN 35
#define Z_DIR_PIN 47 #define Z_DIR_PIN 47
#define Z_ENABLE_PIN 27 #define Z_ENABLE_PIN 27
#define Z_MS1_PIN 68 #define Z_MS1_PIN 68
#define Z_MS2_PIN 67 #define Z_MS2_PIN 67
#define HEATER_BED_PIN 3 #define E0_STEP_PIN 34
#define TEMP_BED_PIN 2 #define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define HEATER_0_PIN 9 #define E1_STEP_PIN 33
#define TEMP_0_PIN 0 #define E1_DIR_PIN 42
#define E1_ENABLE_PIN 25
#define E1_MS1_PIN 63
#define E1_MS2_PIN 64
#define HEATER_1_PIN 7 #define DIGIPOTSS_PIN 38
#define TEMP_1_PIN 1
#if ENABLED(BARICUDA)
#define HEATER_2_PIN 6
#endif
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_STEP_PIN 33
#define E1_DIR_PIN 42
#define E1_ENABLE_PIN 25
#define E1_MS1_PIN 63
#define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping #define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
//
// Temperature Sensors
//
#define TEMP_0_PIN 0
#define TEMP_1_PIN 1
#define TEMP_BED_PIN 2
//
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 7
#define HEATER_2_PIN 6
#define HEATER_BED_PIN 3
#define FAN_PIN 8
#define FAN1_PIN 6
#define FAN2_PIN 2
//
// Misc. Functions
//
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 8
#define FILWIDTH_PIN 3 // ANALOG NUMBERING #define FILWIDTH_PIN 3 // ANALOG NUMBERING
#define PS_ON_PIN 4
/**********************************************************
Fan Pins
Fan_0 8
Fan_1 6
Fan_2 2
***********************************************************/
#define PS_ON_PIN 4
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)

47
Marlin/pins_RAMPS.h
View File

@ -54,6 +54,9 @@
#define LARGE_FLASH true #define LARGE_FLASH true
//
// Servos
//
#ifdef IS_RAMPS_13 #ifdef IS_RAMPS_13
#define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI #define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI
#else #else
@ -63,6 +66,9 @@
#define SERVO2_PIN 5 #define SERVO2_PIN 5
#define SERVO3_PIN 4 #define SERVO3_PIN 4
//
// Limit Switches
//
#define X_MIN_PIN 3 #define X_MIN_PIN 3
#ifndef X_MAX_PIN #ifndef X_MAX_PIN
#define X_MAX_PIN 2 #define X_MAX_PIN 2
@ -71,10 +77,17 @@
#define Y_MAX_PIN 15 #define Y_MAX_PIN 15
#define Z_MIN_PIN 18 #define Z_MIN_PIN 18
#define Z_MAX_PIN 19 #define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN #ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 32 #define Z_MIN_PROBE_PIN 32
#endif #endif
//
// Steppers
//
#define X_STEP_PIN 54 #define X_STEP_PIN 54
#define X_DIR_PIN 55 #define X_DIR_PIN 55
#define X_ENABLE_PIN 38 #define X_ENABLE_PIN 38
@ -95,6 +108,16 @@
#define E1_DIR_PIN 34 #define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30 #define E1_ENABLE_PIN 30
//
// Temperature Sensors
//
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
//
// Misc. Functions
//
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
@ -105,15 +128,11 @@
#define FIL_RUNOUT_PIN 4 #define FIL_RUNOUT_PIN 4
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#define TEMP_0_PIN 13 // ANALOG NUMBERING #define SLED_PIN -1
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1
#endif
//
// Augmentation for auto-assigning RAMPS plugs // Augmentation for auto-assigning RAMPS plugs
//
#if DISABLED(IS_RAMPS_EEB) && DISABLED(IS_RAMPS_EEF) && DISABLED(IS_RAMPS_EFB) && DISABLED(IS_RAMPS_EFF) && DISABLED(IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D) #if DISABLED(IS_RAMPS_EEB) && DISABLED(IS_RAMPS_EEF) && DISABLED(IS_RAMPS_EFB) && DISABLED(IS_RAMPS_EFF) && DISABLED(IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D)
#if HOTENDS > 1 #if HOTENDS > 1
#if TEMP_SENSOR_BED #if TEMP_SENSOR_BED
@ -128,10 +147,9 @@
#endif #endif
#endif #endif
/** //
* Hi Voltage PWM Pin Assignments // Heaters / Fans
*/ //
#ifndef MOSFET_D_PIN #ifndef MOSFET_D_PIN
#define MOSFET_D_PIN -1 #define MOSFET_D_PIN -1
#endif #endif
@ -175,10 +193,9 @@
#define FAN_PIN 4 // IO pin. Buffer needed #define FAN_PIN 4 // IO pin. Buffer needed
#endif #endif
/** //
* LCD Controller Pin Assignments // LCD / Controller
*/ //
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)

55
Marlin/pins_RAMPS_OLD.h
View File

@ -33,45 +33,68 @@
// Uncomment the following line for RAMPS v1.0 // Uncomment the following line for RAMPS v1.0
//#define RAMPS_V_1_0 //#define RAMPS_V_1_0
//
// Limit Switches
//
#define X_MIN_PIN 3
#define X_MAX_PIN 2
#define Y_MIN_PIN 16
#define Y_MAX_PIN 17
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19
#endif
//
// Steppers
//
#define X_STEP_PIN 26 #define X_STEP_PIN 26
#define X_DIR_PIN 28 #define X_DIR_PIN 28
#define X_ENABLE_PIN 24 #define X_ENABLE_PIN 24
#define X_MIN_PIN 3
#define X_MAX_PIN 2
#define Y_STEP_PIN 38 #define Y_STEP_PIN 38
#define Y_DIR_PIN 40 #define Y_DIR_PIN 40
#define Y_ENABLE_PIN 36 #define Y_ENABLE_PIN 36
#define Y_MIN_PIN 16
#define Y_MAX_PIN 17
#define Z_STEP_PIN 44 #define Z_STEP_PIN 44
#define Z_DIR_PIN 46 #define Z_DIR_PIN 46
#define Z_ENABLE_PIN 42 #define Z_ENABLE_PIN 42
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define E0_STEP_PIN 32 #define E0_STEP_PIN 32
#define E0_DIR_PIN 34 #define E0_DIR_PIN 34
#define E0_ENABLE_PIN 30 #define E0_ENABLE_PIN 30
//
// Misc. Functions
//
#define SDPOWER 48 #define SDPOWER 48
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#if ENABLED(RAMPS_V_1_0) // RAMPS_V_1_0 //
#define HEATER_0_PIN 12 // RAMPS 1.0 // Temperature Sensors
#define HEATER_BED_PIN -1 // RAMPS 1.0 //
#define FAN_PIN 11 // RAMPS 1.0
#else // RAMPS_V_1_1 or RAMPS_V_1_2
#define HEATER_0_PIN 10 // RAMPS 1.1
#define HEATER_BED_PIN 8 // RAMPS 1.1
#define FAN_PIN 9 // RAMPS 1.1
#endif
#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
//
// Heaters / Fans
//
#if ENABLED(RAMPS_V_1_0)
#define HEATER_0_PIN 12
#define HEATER_BED_PIN -1
#define FAN_PIN 11
#else // RAMPS_V_1_1 or RAMPS_V_1_2
#define HEATER_0_PIN 10
#define HEATER_BED_PIN 8
#define FAN_PIN 9
#endif
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#define MAX6675_SS 66// Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS 66// Do not use pin 53 if there is even the remote possibility of using Display/SD card

60
Marlin/pins_RUMBA.h
View File

@ -35,27 +35,37 @@
#define DEFAULT_MACHINE_NAME "Rumba" #define DEFAULT_MACHINE_NAME "Rumba"
#define BOARD_NAME "Rumba" #define BOARD_NAME "Rumba"
//
// Limit Switches
//
#define X_MIN_PIN 37
#define X_MAX_PIN 36
#define Y_MIN_PIN 35
#define Y_MAX_PIN 34
#define Z_MIN_PIN 33
#define Z_MAX_PIN 32
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 32
#endif
//
// Steppers
//
#define X_STEP_PIN 17 #define X_STEP_PIN 17
#define X_DIR_PIN 16 #define X_DIR_PIN 16
#define X_ENABLE_PIN 48 #define X_ENABLE_PIN 48
#define X_MIN_PIN 37
#define X_MAX_PIN 36
#define Y_STEP_PIN 54 #define Y_STEP_PIN 54
#define Y_DIR_PIN 47 #define Y_DIR_PIN 47
#define Y_ENABLE_PIN 55 #define Y_ENABLE_PIN 55
#define Y_MIN_PIN 35
#define Y_MAX_PIN 34
#define Z_STEP_PIN 57 #define Z_STEP_PIN 57
#define Z_DIR_PIN 56 #define Z_DIR_PIN 56
#define Z_ENABLE_PIN 62 #define Z_ENABLE_PIN 62
#define Z_MIN_PIN 33
#define Z_MAX_PIN 32
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 33
#endif
#define E0_STEP_PIN 23 #define E0_STEP_PIN 23
#define E0_DIR_PIN 22 #define E0_DIR_PIN 22
@ -69,18 +79,17 @@
#define E2_DIR_PIN 28 #define E2_DIR_PIN 28
#define E2_ENABLE_PIN 39 #define E2_ENABLE_PIN 39
//
// Misc. Functions
//
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 7
#define FAN1_PIN 8
#define PS_ON_PIN 45 #define PS_ON_PIN 45
#define KILL_PIN 46 #define KILL_PIN 46
#define HEATER_0_PIN 2 // EXTRUDER 1 //
#define HEATER_1_PIN 3 // EXTRUDER 2 // Temperature Sensors
#define HEATER_2_PIN 6 // EXTRUDER 3 //
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 6 // ANALOG NUMBERING - connector *K1* on RUMBA thermocouple ADD ON is used #define TEMP_0_PIN 6 // ANALOG NUMBERING - connector *K1* on RUMBA thermocouple ADD ON is used
#else #else
@ -99,10 +108,21 @@
#define TEMP_2_PIN 13 // ANALOG NUMBERING - default connector for thermistor *T2* on rumba board is used #define TEMP_2_PIN 13 // ANALOG NUMBERING - default connector for thermistor *T2* on rumba board is used
#endif #endif
//optional for extruder 4 or chamber: #define TEMP_X_PIN 12 // ANALOG NUMBERING - default connector for thermistor *T3* on rumba board is used //
//optional FAN1 can be used as 4th heater output: #define HEATER_3_PIN 8 // EXTRUDER 4 // Heaters / Fans
//
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_2_PIN 6
#define HEATER_3_PIN 8
#define HEATER_BED_PIN 9
#define FAN_PIN 7
#define FAN1_PIN 8
//optional for extruder 4 or chamber:
// #define TEMP_X_PIN 12 // ANALOG NUMBERING - default connector for thermistor *T3* on rumba board is used
#define HEATER_BED_PIN 9 // BED
#if TEMP_SENSOR_BED == -1 #if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple #define TEMP_BED_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple
#else #else

69
Marlin/pins_SETHI.h
View File

@ -34,53 +34,62 @@
#define GEN7_VERSION 12 // v1.x #define GEN7_VERSION 12 // v1.x
#endif #endif
//x axis pins //
#define X_STEP_PIN 19 // Limit Switches
#define X_DIR_PIN 18 //
#define X_ENABLE_PIN 24 #define X_STOP_PIN 2
#define X_STOP_PIN 2 #define Y_STOP_PIN 0
#define Z_MIN_PIN 1
#define Z_MAX_PIN 0
//y axis pins //
#define Y_STEP_PIN 23 // Steppers
#define Y_DIR_PIN 22 //
#define Y_ENABLE_PIN 24 #define X_STEP_PIN 19
#define Y_STOP_PIN 0 #define X_DIR_PIN 18
#define X_ENABLE_PIN 24
//z axis pins #define Y_STEP_PIN 23
#define Z_STEP_PIN 26 #define Y_DIR_PIN 22
#define Z_DIR_PIN 25 #define Y_ENABLE_PIN 24
#define Z_ENABLE_PIN 24
#define Z_MIN_PIN 1
#define Z_MAX_PIN 0
//extruder pins #define Z_STEP_PIN 26
#define E0_STEP_PIN 28 #define Z_DIR_PIN 25
#define E0_DIR_PIN 27 #define Z_ENABLE_PIN 24
#define E0_ENABLE_PIN 24
#define TEMP_0_PIN 1 #define E0_STEP_PIN 28
#define TEMP_BED_PIN 2 #define E0_DIR_PIN 27
#define E0_ENABLE_PIN 24
#define HEATER_0_PIN 4 //
#define HEATER_BED_PIN 3 // Temperature Sensors
//
#define TEMP_0_PIN 1
#define TEMP_BED_PIN 2
//
// Heaters / Fans
//
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 3
#if (GEN7_VERSION >= 13) #if (GEN7_VERSION >= 13)
// Gen7 v1.3 removed the fan pin // Gen7 v1.3 removed the fan pin
#define FAN_PIN -1 #define FAN_PIN -1
#else #else
#define FAN_PIN 31 #define FAN_PIN 31
#endif #endif
#define PS_ON_PIN 15 #define PS_ON_PIN 15
//All these generations of Gen7 supply thermistor power //All these generations of Gen7 supply thermistor power
//via PS_ON, so ignore bad thermistor readings //via PS_ON, so ignore bad thermistor readings
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE #define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
//our pin for debugging. //our pin for debugging.
#define DEBUG_PIN 0 #define DEBUG_PIN 0
//our RS485 pins //our RS485 pins
#define TX_ENABLE_PIN 12 #define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13 #define RX_ENABLE_PIN 13

104
Marlin/pins_ULTIMAIN_2.h
View File

@ -32,43 +32,35 @@
#define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin" #define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
#define BOARD_NAME "Ultimaker 2.x" #define BOARD_NAME "Ultimaker 2.x"
#define X_STEP_PIN 25 //
#define X_DIR_PIN 23 // Limit Switches
#define X_STOP_PIN 22 //
#define X_ENABLE_PIN 27 #define X_STOP_PIN 22
#define Y_STOP_PIN 26
#define Z_STOP_PIN 29
#define Y_STEP_PIN 32 //
#define Y_DIR_PIN 33 // Steppers
#define Y_STOP_PIN 26 //
#define Y_ENABLE_PIN 31 #define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_ENABLE_PIN 27
#define Z_STEP_PIN 35 #define Y_STEP_PIN 32
#define Z_DIR_PIN 36 #define Y_DIR_PIN 33
#define Z_STOP_PIN 29 #define Y_ENABLE_PIN 31
#define Z_ENABLE_PIN 34
#define HEATER_BED_PIN 4 #define Z_STEP_PIN 35
#define TEMP_BED_PIN 10 #define Z_DIR_PIN 36
#define Z_ENABLE_PIN 34
#define HEATER_0_PIN 2 #define E0_STEP_PIN 42
#define TEMP_0_PIN 8 #define E0_DIR_PIN 43
#define E0_ENABLE_PIN 37
#define HEATER_1_PIN 3 #define E1_STEP_PIN 49
#define TEMP_1_PIN 9 #define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
#define E0_STEP_PIN 42
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 37
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
#define SDSS 53
#define LED_PIN 8
#define FAN_PIN 7
#define SAFETY_TRIGGERED_PIN 28 //PIN to detect the safety circuit has triggered
#define MAIN_VOLTAGE_MEASURE_PIN 14 //Analogue PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
#define MOTOR_CURRENT_PWM_XY_PIN 44 #define MOTOR_CURRENT_PWM_XY_PIN 44
#define MOTOR_CURRENT_PWM_Z_PIN 45 #define MOTOR_CURRENT_PWM_Z_PIN 45
@ -77,18 +69,42 @@
#define MOTOR_CURRENT_PWM_RANGE 2000 #define MOTOR_CURRENT_PWM_RANGE 2000
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
#define BEEPER_PIN 18 //
// Temperature Sensors
//
#define TEMP_0_PIN 8
#define TEMP_1_PIN 9
#define TEMP_BED_PIN 10
#define LCD_PINS_RS 20 //
#define LCD_PINS_ENABLE 15 // Heaters / Fans
#define LCD_PINS_D4 14 //
#define LCD_PINS_D5 21 #define HEATER_0_PIN 2
#define LCD_PINS_D6 5 #define HEATER_1_PIN 3
#define LCD_PINS_D7 6 #define HEATER_BED_PIN 4
//buttons are directly attached #define FAN_PIN 7
#define BTN_EN1 40
#define BTN_EN2 41
#define BTN_ENC 19
#define SD_DETECT_PIN 39 //
// SD Card
//
#define SDSS 53
#define SD_DETECT_PIN 39
#define LED_PIN 8
#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered
#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
#define BEEPER_PIN 18
#define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 14
#define LCD_PINS_D5 21
#define LCD_PINS_D6 5
#define LCD_PINS_D7 6
// Buttons are directly attached
#define BTN_EN1 40
#define BTN_EN2 41
#define BTN_ENC 19

83
Marlin/pins_ULTIMAKER.h
View File

@ -34,49 +34,74 @@
#define LARGE_FLASH true #define LARGE_FLASH true
#define SERVO0_PIN 13 // untested //
// Servos
//
#define SERVO0_PIN 13 // untested
#define X_STEP_PIN 25 //
#define X_DIR_PIN 23 // Limit Switches
#define X_MIN_PIN 22 //
#define X_MAX_PIN 24 #define X_MIN_PIN 22
#define X_ENABLE_PIN 27 #define X_MAX_PIN 24
#define Y_MIN_PIN 26
#define Y_MAX_PIN 28
#define Z_MIN_PIN 30
#define Z_MAX_PIN 32
#define Y_STEP_PIN 31 //
#define Y_DIR_PIN 33 // Z Probe (when not Z_MIN_PIN)
#define Y_MIN_PIN 26 //
#define Y_MAX_PIN 28 #ifndef Z_MIN_PROBE_PIN
#define Y_ENABLE_PIN 29 #define Z_MIN_PROBE_PIN 32
#endif
#define Z_STEP_PIN 37 //
#define Z_DIR_PIN 39 // Steppers
#define Z_MIN_PIN 30 //
#define Z_MAX_PIN 32 #define X_STEP_PIN 25
#define Z_ENABLE_PIN 35 #define X_DIR_PIN 23
#define X_ENABLE_PIN 27
#define HEATER_BED_PIN 4 #define Y_STEP_PIN 31
#define TEMP_BED_PIN 10 #define Y_DIR_PIN 33
#define Y_ENABLE_PIN 29
#define HEATER_0_PIN 2 #define Z_STEP_PIN 37
#define TEMP_0_PIN 8 #define Z_DIR_PIN 39
#define Z_ENABLE_PIN 35
#define HEATER_1_PIN 3 #define E0_STEP_PIN 43
#define TEMP_1_PIN 9 #define E0_DIR_PIN 45
#define E0_ENABLE_PIN 41
#define E0_STEP_PIN 43 #define E1_STEP_PIN 49
#define E0_DIR_PIN 45 #define E1_DIR_PIN 47
#define E0_ENABLE_PIN 41 #define E1_ENABLE_PIN 48
#define E1_STEP_PIN 49 //
#define E1_DIR_PIN 47 // Temperature Sensors
#define E1_ENABLE_PIN 48 //
#define TEMP_0_PIN 8
#define TEMP_1_PIN 9
#define TEMP_BED_PIN 10
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 7 #define FAN_PIN 7
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing. #define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing.
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#define BEEPER_PIN 18 #define BEEPER_PIN 18

85
Marlin/pins_ULTIMAKER_OLD.h
View File

@ -34,41 +34,64 @@
#define LARGE_FLASH true #define LARGE_FLASH true
#define X_STEP_PIN 25 //
#define X_DIR_PIN 23 // Limit Switches
#define X_MIN_PIN 15 //
#define X_MAX_PIN 14 #define X_MIN_PIN 15
#define X_ENABLE_PIN 27 #define X_MAX_PIN 14
#define Y_MIN_PIN 17
#define Y_MAX_PIN 16
#define Z_MIN_PIN 19
#define Z_MAX_PIN 18
#define Y_STEP_PIN 31 //
#define Y_DIR_PIN 33 // Z Probe (when not Z_MIN_PIN)
#define Y_MIN_PIN 17 //
#define Y_MAX_PIN 16 #ifndef Z_MIN_PROBE_PIN
#define Y_ENABLE_PIN 29 #define Z_MIN_PROBE_PIN 18
#endif
#define Z_STEP_PIN 37 //
#define Z_DIR_PIN 39 // Steppers
#define Z_MIN_PIN 19 //
#define Z_MAX_PIN 18 #define X_STEP_PIN 25
#define Z_ENABLE_PIN 35 #define X_DIR_PIN 23
#define X_ENABLE_PIN 27
#define TEMP_0_PIN 8 #define Y_STEP_PIN 31
#define TEMP_1_PIN 1 #define Y_DIR_PIN 33
#define Y_ENABLE_PIN 29
#define HEATER_0_PIN 2 #define Z_STEP_PIN 37
#define HEATER_1_PIN 1 #define Z_DIR_PIN 39
#define Z_ENABLE_PIN 35
#define E0_STEP_PIN 43 #define E0_STEP_PIN 43
#define E0_DIR_PIN 45 #define E0_DIR_PIN 45
#define E0_ENABLE_PIN 41 #define E0_ENABLE_PIN 41
#define E1_STEP_PIN -1 #define E1_STEP_PIN -1
#define E1_DIR_PIN -1 #define E1_DIR_PIN -1
#define E1_ENABLE_PIN -1 #define E1_ENABLE_PIN -1
#define LCD_PINS_RS 24 //
#define LCD_PINS_ENABLE 22 // Temperature Sensors
#define LCD_PINS_D4 36 //
#define LCD_PINS_D5 34 #define TEMP_0_PIN 8
#define LCD_PINS_D6 32 #define TEMP_1_PIN 1
#define LCD_PINS_D7 30
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define HEATER_1_PIN 1
//
// LCD / Controller
//
#define LCD_PINS_RS 24
#define LCD_PINS_ENABLE 22
#define LCD_PINS_D4 36
#define LCD_PINS_D5 34
#define LCD_PINS_D6 32
#define LCD_PINS_D7 30