MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

More misc UBL fixes and update gMax examples (#6632)

Browse Source 
I think I forgot to Sync before I committed last time.   Some UBL
changes did not stick.

Also, update the gMax configuaration.h file so other than unique numbers
and settings, it exactly matches the default configuration.h file.
This commit is contained in:
Roxy-3D 2017-05-07 19:02:24 -05:00 committed by GitHub
parent d92fa40c62
commit 110afff415
3 changed files with 42 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

44
Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h
View File

@ -532,21 +532,51 @@
#define DEFAULT_ZJERK 1.0 #define DEFAULT_ZJERK 1.0
#define DEFAULT_EJERK 4.0 #define DEFAULT_EJERK 4.0
//===========================================================================
//============================= Z Probe Options =============================
//===========================================================================
// @section probes
//
// See http://marlinfw.org/configuration/probes.html
//
/** /**
* =========================================================================== * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
* ============================= Z Probe Options =============================
* ===========================================================================
* @section probes
* *
* Enable this option for a probe connected to the Z Min endstop pin.
*/
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/**
* Z_MIN_PROBE_ENDSTOP
* *
* Enable this option for a probe connected to any pin except Z-Min.
* (By default Marlin assumes the Z-Max endstop pin.)
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below.
*
* - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors.
*
* - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin:
* - For simple switches connect...
* - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32.
*
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/
//#define Z_MIN_PROBE_ENDSTOP
//#define Z_MIN_PROBE_PIN Z_MAX_PIN
/**
* Probe Type * Probe Type
* Probes are sensors/switches that are activated / deactivated before/after use.
* *
* Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
* You must activate one of these to use Auto Bed Leveling below. * You must activate one of these to use Auto Bed Leveling below.
*
* Use M851 to set the Z probe vertical offset from the nozzle. Store with M500.
*/ */
/** /**

6
Marlin/ubl.cpp
View File

@ -136,7 +136,7 @@
void unified_bed_leveling::display_map(const int map_type) { void unified_bed_leveling::display_map(const int map_type) {
const bool map0 = map_type == 0; const bool map0 = map_type == 0;
const uint8_t spaces = 9; const uint8_t spaces = 11;
if (map0) { if (map0) {
SERIAL_PROTOCOLLNPGM("\nBed Topography Report:\n"); SERIAL_PROTOCOLLNPGM("\nBed Topography Report:\n");
@ -145,7 +145,7 @@
serial_echo_xy(GRID_MAX_POINTS_X - 1, GRID_MAX_POINTS_Y - 1); serial_echo_xy(GRID_MAX_POINTS_X - 1, GRID_MAX_POINTS_Y - 1);
SERIAL_EOL; SERIAL_EOL;
serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MAX_Y); serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MAX_Y);
SERIAL_ECHO_SP(spaces * (GRID_MAX_POINTS_X - 2)); SERIAL_ECHO_SP(spaces * (GRID_MAX_POINTS_X - 2)-3);
serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MAX_Y); serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MAX_Y);
SERIAL_EOL; SERIAL_EOL;
} }
@ -190,7 +190,7 @@
if (map0) { if (map0) {
serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MIN_Y); serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MIN_Y);
SERIAL_ECHO_SP(spaces * (GRID_MAX_POINTS_X - 2) + 4); SERIAL_ECHO_SP(spaces * (GRID_MAX_POINTS_X - 2) + 1);
serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MIN_Y); serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MIN_Y);
SERIAL_EOL; SERIAL_EOL;
serial_echo_xy(0, 0); serial_echo_xy(0, 0);

3
Marlin/ubl_motion.cpp
View File

@ -225,7 +225,8 @@
const float e_normalized_dist = e_position / on_axis_distance, const float e_normalized_dist = e_position / on_axis_distance,
z_normalized_dist = z_position / on_axis_distance; z_normalized_dist = z_position / on_axis_distance;
int current_xi = cell_start_xi, current_yi = cell_start_yi; int current_xi = cell_start_xi,
current_yi = cell_start_yi;
const float m = dy / dx, const float m = dy / dx,
c = start[Y_AXIS] - m * start[X_AXIS]; c = start[Y_AXIS] - m * start[X_AXIS];