diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index f19dc3db0..8df5c4cbd 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -144,10 +144,6 @@
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
   // #define Z_DUAL_ENDSTOPS
 
   #if ENABLED(Z_DUAL_ENDSTOPS)
diff --git a/Marlin/configurator/config/Configuration_adv.h b/Marlin/configurator/config/Configuration_adv.h
index 7a12bec5b..12780282c 100644
--- a/Marlin/configurator/config/Configuration_adv.h
+++ b/Marlin/configurator/config/Configuration_adv.h
@@ -144,10 +144,6 @@
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
   // #define Z_DUAL_ENDSTOPS
 
   #if ENABLED(Z_DUAL_ENDSTOPS)
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 36064d3ce..23703c304 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -152,10 +152,6 @@
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
   // #define Z_DUAL_ENDSTOPS
 
   #if ENABLED(Z_DUAL_ENDSTOPS)
diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h
index 2fac324e9..0f914c127 100644
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@@ -152,10 +152,6 @@
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
   // #define Z_DUAL_ENDSTOPS
 
   #if ENABLED(Z_DUAL_ENDSTOPS)
diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h
index 2a034dc53..09cba2f6e 100644
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@@ -152,10 +152,6 @@
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
   // #define Z_DUAL_ENDSTOPS
 
   #if ENABLED(Z_DUAL_ENDSTOPS)
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index e68085ba7..bfe8e4113 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -144,10 +144,6 @@
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
   // #define Z_DUAL_ENDSTOPS
 
   #if ENABLED(Z_DUAL_ENDSTOPS)
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index e2c4571a2..7dc95ec6d 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -152,10 +152,6 @@
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
   // #define Z_DUAL_ENDSTOPS
 
   #if ENABLED(Z_DUAL_ENDSTOPS)
diff --git a/Marlin/example_configurations/TAZ4/Configuration_adv.h b/Marlin/example_configurations/TAZ4/Configuration_adv.h
index 400f44f34..637c6dd99 100644
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@@ -152,10 +152,6 @@
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
   // #define Z_DUAL_ENDSTOPS
 
   #if ENABLED(Z_DUAL_ENDSTOPS)
diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h
index d4a047343..cac0df63c 100644
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@@ -152,10 +152,6 @@
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
   // #define Z_DUAL_ENDSTOPS
 
   #if ENABLED(Z_DUAL_ENDSTOPS)
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
index f53723952..b3e713fc6 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
@@ -152,10 +152,6 @@
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
   // #define Z_DUAL_ENDSTOPS
 
   #if ENABLED(Z_DUAL_ENDSTOPS)
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 923e10792..bff8210b4 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -152,10 +152,6 @@
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
   // #define Z_DUAL_ENDSTOPS
 
   #if ENABLED(Z_DUAL_ENDSTOPS)
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index e2899efde..803c302ba 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -152,10 +152,6 @@
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
   // #define Z_DUAL_ENDSTOPS
 
   #if ENABLED(Z_DUAL_ENDSTOPS)
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index e40f082bf..c75f76997 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -152,10 +152,6 @@
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
   // #define Z_DUAL_ENDSTOPS
 
   #if ENABLED(Z_DUAL_ENDSTOPS)
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 112bd9e9a..c77a775e1 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -152,10 +152,6 @@
   // Play a little bit with small adjustments (0.5mm) and check the behaviour.
   // The M119 (endstops report) will start reporting the Z2 Endstop as well.
 
-  #define Z2_STEP_PIN E2_STEP_PIN           // Stepper to be used to Z2 axis.
-  #define Z2_DIR_PIN E2_DIR_PIN
-  #define Z2_ENABLE_PIN E2_ENABLE_PIN
-
   // #define Z_DUAL_ENDSTOPS
 
   #if ENABLED(Z_DUAL_ENDSTOPS)