Follow-up the PR #3662 (Rewritten FILAMENT_CHANGE_ENABLE feature)
This commit is contained in:
Scott Lahteine 2016-07-02 17:16:09 -07:00 committed by GitHub
commit 1236a3b3ab

View File

@ -551,16 +551,30 @@ const unsigned int dropsegments = 5; //everything with less than this number of
// Add support for experimental filament exchange support M600; requires display // Add support for experimental filament exchange support M600; requires display
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
//#define FILAMENTCHANGEENABLE // #define FILAMENT_CHANGE_FEATURE // Enable filament exchange menu and M600 g-code (used for runout sensor too)
#if ENABLED(FILAMENTCHANGEENABLE) #if ENABLED(FILAMENT_CHANGE_FEATURE)
#define FILAMENTCHANGE_XPOS 30 #define FILAMENT_CHANGE_X_POS 30 // X position of hotend
#define FILAMENTCHANGE_YPOS 10 #define FILAMENT_CHANGE_Y_POS 10 // Y position of hotend
#define FILAMENTCHANGE_ZADD 10 #define FILAMENT_CHANGE_Z_ADD 10 // Z addition of hotend (lift)
#define FILAMENTCHANGE_FIRSTRETRACT -1 #define FILAMENT_CHANGE_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
//#define FILAMENTCHANGE_FINALRETRACT -100 #define FILAMENT_CHANGE_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers)
//#define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD #define FILAMENT_CHANGE_RETRACT_LENGTH 1 // Initial retract in mm
//#define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop // It is a short retract used immediately after print interrupt before move to filament exchange position
//#define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop #define FILAMENT_CHANGE_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
//#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
// Longer length for bowden printers to unload filament from whole bowden tube,
// shorter lenght for printers without bowden to unload filament from extruder only,
// 0 to disable unloading for manual unloading
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // Load filament length over hotend in mm
// Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
// Short or zero length for printers without bowden where loading is not used
#define FILAMENT_CHANGE_LOAD_FEEDRATE 10 // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
#define FILAMENT_CHANGE_EXTRUDE_LENGTH 50 // Extrude filament length in mm after filament is load over the hotend,
// 0 to disable for manual extrusion
// Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
// or until outcoming filament color is not clear for filament color change
#define FILAMENT_CHANGE_EXTRUDE_FEEDRATE 3 // Extrude filament feedrate in mm/s - must be slower than load feedrate
#endif #endif
#endif #endif