MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge pull request #9538 from shaktee/bibo-cyclops-1.1x

Browse Source 
[1.1.x] BIBO Cyclops
This commit is contained in:
Scott Lahteine 2018-02-08 21:00:59 -06:00 committed by GitHub
commit 169515404d
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
3 changed files with 1808 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Marlin/example_configurations/BIBO/TouchX/Configuration_adv.h
View File

@ -64,8 +64,8 @@
* THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
*/
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
@ -79,7 +79,7 @@
* and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
* below 2.
*/
#define WATCH_TEMP_PERIOD 45 // Seconds
#define WATCH_TEMP_PERIOD 20 // Seconds
#define WATCH_TEMP_INCREASE 2 // Degrees Celsius
#endif
@ -87,7 +87,7 @@
* Thermal Protection parameters for the bed are just as above for hotends.
*/
#if ENABLED(THERMAL_PROTECTION_BED)
#define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
#define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
/**

1798
Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h Normal file
View File

File diff suppressed because it is too large Load Diff

12
Marlin/example_configurations/BIBO/TouchX/Configuration.h → Marlin/example_configurations/BIBO/TouchX/default/Configuration.h
View File

@ -543,14 +543,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
* Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/
#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,400,93.6}
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 93.6 }
/**
* Default Max Feed Rate (mm/s)
* Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/
#define DEFAULT_MAX_FEEDRATE {350, 350, 10, 25}
#define DEFAULT_MAX_FEEDRATE { 350, 350, 10, 25 }
/**
* Default Max Acceleration (change/s) change = mm/s
@ -558,7 +558,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
* Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/
#define DEFAULT_MAX_ACCELERATION {1100,1100,300,5000}
#define DEFAULT_MAX_ACCELERATION { 1100, 1100, 300, 5000 }
/**
* Default Acceleration (change/s) change = mm/s
@ -568,9 +568,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
* M204 R Retract Acceleration
* M204 T Travel Acceleration
*/
#define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration in mm/s^2 for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
#define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves
/**
* Default Jerk (mm/s)