diff --git a/Marlin/language.h b/Marlin/language.h index d092726d2..c5a3d5008 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -71,6 +71,13 @@ #define MSG_EXTRUDE "Extrude" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "Move Axis" + #define MSG_MOVE_X "Move X" + #define MSG_MOVE_Y "Move Y" + #define MSG_MOVE_Z "Move Z" + #define MSG_MOVE_E "Extruder" + #define MSG_MOVE_01MM "Move 0.1mm" + #define MSG_MOVE_1MM "Move 1mm" + #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED "Speed" #define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE1 "Nozzle2" @@ -140,6 +147,12 @@ #define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" + #define MSG_BABYSTEP_X "Babystep X" + #define MSG_BABYSTEP_Y "Babystep Y" + #define MSG_BABYSTEP_Z "Babystep Z" + #define MSG_ENDSTOP_ABORT "Endstop abort" + #define MSG_CONTRAST "Contrast" + // Serial Console Messages #define MSG_Enqueing "enqueing \"" @@ -211,6 +224,9 @@ #define MSG_ENDSTOPS_HIT "endstops hit: " #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" + #define MSG_BABYSTEPPING_X "Babystepping X" + #define MSG_BABYSTEPPING_Y "Babystepping Y" + #define MSG_BABYSTEPPING_Z "Babystepping Z" #endif @@ -236,6 +252,13 @@ #define MSG_EXTRUDE "Ekstruzja" #define MSG_RETRACT "Cofanie" #define MSG_MOVE_AXIS "Ruch osi" + #define MSG_MOVE_X "Move X" + #define MSG_MOVE_Y "Move Y" + #define MSG_MOVE_Z "Move Z" + #define MSG_MOVE_E "Extruder" + #define MSG_MOVE_01MM "Move 0.1mm" + #define MSG_MOVE_1MM "Move 1mm" + #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED "Predkosc" #define MSG_NOZZLE "Dysza" #define MSG_NOZZLE1 "Dysza2" @@ -308,6 +331,11 @@ #define MSG_ZPROBE_OUT "Probkuj Z poza lozem" #define MSG_POSITION_UNKNOWN "Domuj X/Y przed Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" + #define MSG_BABYSTEP_X "Babystep X" + #define MSG_BABYSTEP_Y "Babystep Y" + #define MSG_BABYSTEP_Z "Babystep Z" + #define MSG_ENDSTOP_ABORT "Endstop abort" + #define MSG_CONTRAST "Contrast" // Serial Console Messages @@ -380,6 +408,9 @@ #define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: " #define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje" #define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje" + #define MSG_BABYSTEPPING_X "Babystepping X" + #define MSG_BABYSTEPPING_Y "Babystepping Y" + #define MSG_BABYSTEPPING_Z "Babystepping Z" #endif @@ -406,6 +437,13 @@ #define MSG_PREHEAT_PLA "Prechauffage PLA" #define MSG_PREHEAT_ABS "Prechauffage ABS" #define MSG_MOVE_AXIS "Deplacer un axe" + #define MSG_MOVE_X "Move X" + #define MSG_MOVE_Y "Move Y" + #define MSG_MOVE_Z "Move Z" + #define MSG_MOVE_E "Extruder" + #define MSG_MOVE_01MM "Move 0.1mm" + #define MSG_MOVE_1MM "Move 1mm" + #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED " Vitesse" #define MSG_NOZZLE "Buse" #define MSG_NOZZLE1 "Buse2" @@ -476,6 +514,11 @@ #define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" + #define MSG_BABYSTEP_X "Babystep X" + #define MSG_BABYSTEP_Y "Babystep Y" + #define MSG_BABYSTEP_Z "Babystep Z" + #define MSG_ENDSTOP_ABORT "Endstop abort" + #define MSG_CONTRAST "Contrast" // Serial Console Messages @@ -548,6 +591,9 @@ #define MSG_ENDSTOPS_HIT "Fin de course atteint: " #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee" #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee" + #define MSG_BABYSTEPPING_X "Babystepping X" + #define MSG_BABYSTEPPING_Y "Babystepping Y" + #define MSG_BABYSTEPPING_Z "Babystepping Z" #endif @@ -575,6 +621,13 @@ #define MSG_EXTRUDE "Extrude" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "Achsen bewegen" + #define MSG_MOVE_X "X bewegen" + #define MSG_MOVE_Y "Y bewegen" + #define MSG_MOVE_Z "Z bewegen" + #define MSG_MOVE_E "Extruder" + #define MSG_MOVE_01MM "0.1mm bewegen" + #define MSG_MOVE_1MM "1mm bewegen" + #define MSG_MOVE_10MM "10mm bewegen" #define MSG_SPEED "Geschw" #define MSG_NOZZLE "Düse" #define MSG_NOZZLE1 "Düse2" @@ -647,6 +700,11 @@ #define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" + #define MSG_BABYSTEP_X "Babystep X" + #define MSG_BABYSTEP_Y "Babystep Y" + #define MSG_BABYSTEP_Z "Babystep Z" + #define MSG_ENDSTOP_ABORT "Endstop abort" + #define MSG_CONTRAST "Contrast" // Serial Console Messages @@ -719,6 +777,9 @@ #define MSG_ENDSTOPS_HIT "endstops hit: " #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" + #define MSG_BABYSTEPPING_X "Babystepping X" + #define MSG_BABYSTEPPING_Y "Babystepping Y" + #define MSG_BABYSTEPPING_Z "Babystepping Z" #endif @@ -744,6 +805,13 @@ #define MSG_EXTRUDE "Extruir" #define MSG_RETRACT "Retraer" #define MSG_MOVE_AXIS "Mover Ejes" + #define MSG_MOVE_X "Move X" + #define MSG_MOVE_Y "Move Y" + #define MSG_MOVE_Z "Move Z" + #define MSG_MOVE_E "Extruder" + #define MSG_MOVE_01MM "Move 0.1mm" + #define MSG_MOVE_1MM "Move 1mm" + #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED "Velocidad" #define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE1 "Nozzle2" @@ -822,6 +890,11 @@ #define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" + #define MSG_BABYSTEP_X "Babystep X" + #define MSG_BABYSTEP_Y "Babystep Y" + #define MSG_BABYSTEP_Z "Babystep Z" + #define MSG_ENDSTOP_ABORT "Endstop abort" + #define MSG_CONTRAST "Contrast" // Serial Console Messages @@ -893,6 +966,9 @@ #define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " #define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" #define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" + #define MSG_BABYSTEPPING_X "Babystepping X" + #define MSG_BABYSTEPPING_Y "Babystepping Y" + #define MSG_BABYSTEPPING_Z "Babystepping Z" #endif @@ -917,6 +993,13 @@ #define MSG_EXTRUDE " Экструзия " #define MSG_RETRACT " Откат" #define MSG_MOVE_AXIS " Движение по осям \x7E" + #define MSG_MOVE_X "Move X" + #define MSG_MOVE_Y "Move Y" + #define MSG_MOVE_Z "Move Z" + #define MSG_MOVE_E "Extruder" + #define MSG_MOVE_01MM "Move 0.1mm" + #define MSG_MOVE_1MM "Move 1mm" + #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED " Скорость:" #define MSG_NOZZLE " \002 Фильера:" #define MSG_NOZZLE1 " \002 Фильера2:" @@ -987,6 +1070,11 @@ #define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" + #define MSG_BABYSTEP_X "Babystep X" + #define MSG_BABYSTEP_Y "Babystep Y" + #define MSG_BABYSTEP_Z "Babystep Z" + #define MSG_ENDSTOP_ABORT "Endstop abort" + #define MSG_CONTRAST "Contrast" // Serial Console Messages @@ -1057,6 +1145,9 @@ #define MSG_ENDSTOPS_HIT "концевик сработал: " #define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии" #define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии" + #define MSG_BABYSTEPPING_X "Babystepping X" + #define MSG_BABYSTEPPING_Y "Babystepping Y" + #define MSG_BABYSTEPPING_Z "Babystepping Z" #endif @@ -1082,6 +1173,13 @@ #define MSG_EXTRUDE "Estrudi" #define MSG_RETRACT "Ritrai" #define MSG_MOVE_AXIS "Muovi Asse" + #define MSG_MOVE_X "Move X" + #define MSG_MOVE_Y "Move Y" + #define MSG_MOVE_Z "Move Z" + #define MSG_MOVE_E "Extruder" + #define MSG_MOVE_01MM "Move 0.1mm" + #define MSG_MOVE_1MM "Move 1mm" + #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED "Velcità" #define MSG_NOZZLE "Ugello" #define MSG_NOZZLE1 "Ugello2" @@ -1152,6 +1250,11 @@ #define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" + #define MSG_BABYSTEP_X "Babystep X" + #define MSG_BABYSTEP_Y "Babystep Y" + #define MSG_BABYSTEP_Z "Babystep Z" + #define MSG_ENDSTOP_ABORT "Endstop abort" + #define MSG_CONTRAST "Contrast" // Serial Console Messages @@ -1224,6 +1327,9 @@ #define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: " #define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda" #define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga" + #define MSG_BABYSTEPPING_X "Babystepping X" + #define MSG_BABYSTEPPING_Y "Babystepping Y" + #define MSG_BABYSTEPPING_Z "Babystepping Z" #endif @@ -1251,6 +1357,13 @@ #define MSG_PREHEAT_PLA " pre-aquecer PLA" #define MSG_PREHEAT_ABS " pre-aquecer ABS" #define MSG_MOVE_AXIS " Mover eixo \x7E" + #define MSG_MOVE_X "Move X" + #define MSG_MOVE_Y "Move Y" + #define MSG_MOVE_Z "Move Z" + #define MSG_MOVE_E "Extruder" + #define MSG_MOVE_01MM "Move 0.1mm" + #define MSG_MOVE_1MM "Move 1mm" + #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED " Velocidade:" #define MSG_NOZZLE " \002Nozzle:" #define MSG_NOZZLE1 " \002Nozzle2:" @@ -1326,6 +1439,11 @@ #define MSG_ZPROBE_OUT "Sonda fora da mesa" #define MSG_POSITION_UNKNOWN "Home X/Y antes de Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" + #define MSG_BABYSTEP_X "Babystep X" + #define MSG_BABYSTEP_Y "Babystep Y" + #define MSG_BABYSTEP_Z "Babystep Z" + #define MSG_ENDSTOP_ABORT "Endstop abort" + #define MSG_CONTRAST "Contrast" // Serial Console Messages @@ -1398,7 +1516,9 @@ #define MSG_ENDSTOPS_HIT "O ponto final foi tocado: " #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada" #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada" - + #define MSG_BABYSTEPPING_X "Babystepping X" + #define MSG_BABYSTEPPING_Y "Babystepping Y" + #define MSG_BABYSTEPPING_Z "Babystepping Z" #endif @@ -1427,6 +1547,13 @@ #define MSG_EXTRUDE "Pursota" #define MSG_RETRACT "Veda takaisin" #define MSG_MOVE_AXIS "Liikuta akseleita" + #define MSG_MOVE_X "Move X" + #define MSG_MOVE_Y "Move Y" + #define MSG_MOVE_Z "Move Z" + #define MSG_MOVE_E "Extruder" + #define MSG_MOVE_01MM "Move 0.1mm" + #define MSG_MOVE_1MM "Move 1mm" + #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED "Nopeus" #define MSG_NOZZLE "Suutin" #define MSG_NOZZLE1 "Suutin2" @@ -1496,6 +1623,11 @@ #define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" + #define MSG_BABYSTEP_X "Babystep X" + #define MSG_BABYSTEP_Y "Babystep Y" + #define MSG_BABYSTEP_Z "Babystep Z" + #define MSG_ENDSTOP_ABORT "Endstop abort" + #define MSG_CONTRAST "Contrast" // Serial Console Messages @@ -1568,6 +1700,11 @@ #define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: " #define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty" #define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty" + #define MSG_BABYSTEPPING_X "Babystepping X" + #define MSG_BABYSTEPPING_Y "Babystepping Y" + #define MSG_BABYSTEPPING_Z "Babystepping Z" + #define MSG_ENDSTOP_ABORT "Endstop abort" + #define MSG_CONTRAST "Contrast" #endif @@ -1592,6 +1729,13 @@ #define MSG_EXTRUDE "Extruir" #define MSG_RETRACT "Retraer" #define MSG_MOVE_AXIS "Mover Eixes" + #define MSG_MOVE_X "Move X" + #define MSG_MOVE_Y "Move Y" + #define MSG_MOVE_Z "Move Z" + #define MSG_MOVE_E "Extruder" + #define MSG_MOVE_01MM "Move 0.1mm" + #define MSG_MOVE_1MM "Move 1mm" + #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED "Velocidat" #define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE1 "Nozzle2" @@ -1670,6 +1814,11 @@ #define MSG_ZPROBE_OUT "ZProbe Outside Bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" + #define MSG_BABYSTEP_X "Babystep X" + #define MSG_BABYSTEP_Y "Babystep Y" + #define MSG_BABYSTEP_Z "Babystep Z" + #define MSG_ENDSTOP_ABORT "Endstop abort" + #define MSG_CONTRAST "Contrast" // Serial Console Messages @@ -1741,6 +1890,10 @@ #define MSG_ENDSTOPS_HIT "S'ha tocau a fin de carril: " #define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria privada" #define MSG_ERR_LONG_EXTRUDE_STOP " extrusion masiau larga privada" + #define MSG_BABYSTEPPING_X "Babystepping X" + #define MSG_BABYSTEPPING_Y "Babystepping Y" + #define MSG_BABYSTEPPING_Z "Babystepping Z" #endif + #endif // ifndef LANGUAGE_H diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 84a3ebf7f..269becf8e 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -344,7 +344,7 @@ static void lcd_babystep_x() } if (lcdDrawUpdate) { - lcd_implementation_drawedit(PSTR("Babystepping X"),""); + lcd_implementation_drawedit(PSTR(MSG_BABYSTEPPING_X),""); } if (LCD_CLICKED) { @@ -364,7 +364,7 @@ static void lcd_babystep_y() } if (lcdDrawUpdate) { - lcd_implementation_drawedit(PSTR("Babystepping Y"),""); + lcd_implementation_drawedit(PSTR(MSG_BABYSTEPPING_Y),""); } if (LCD_CLICKED) { @@ -384,7 +384,7 @@ static void lcd_babystep_z() } if (lcdDrawUpdate) { - lcd_implementation_drawedit(PSTR("Babystepping Z"),""); + lcd_implementation_drawedit(PSTR(MSG_BABYSTEPPING_Z),""); } if (LCD_CLICKED) { @@ -415,10 +415,10 @@ static void lcd_tune_menu() #ifdef BABYSTEPPING #ifdef BABYSTEP_XY - MENU_ITEM(submenu, "Babystep X", lcd_babystep_x); - MENU_ITEM(submenu, "Babystep Y", lcd_babystep_y); + MENU_ITEM(submenu, MSG_BABYSTEP_X, lcd_babystep_x); + MENU_ITEM(submenu, MSG_BABYSTEP_Y, lcd_babystep_y); #endif //BABYSTEP_XY - MENU_ITEM(submenu, "Babystep Z", lcd_babystep_z); + MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z); #endif #ifdef FILAMENTCHANGEENABLE MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600")); @@ -573,12 +573,12 @@ static void lcd_move_menu_axis() { START_MENU(); MENU_ITEM(back, MSG_MOVE_AXIS, lcd_move_menu); - MENU_ITEM(submenu, "Move X", lcd_move_x); - MENU_ITEM(submenu, "Move Y", lcd_move_y); + MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_x); + MENU_ITEM(submenu, MSG_MOVE_Y, lcd_move_y); if (move_menu_scale < 10.0) { - MENU_ITEM(submenu, "Move Z", lcd_move_z); - MENU_ITEM(submenu, "Extruder", lcd_move_e); + MENU_ITEM(submenu, MSG_MOVE_Z, lcd_move_z); + MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e); } END_MENU(); } @@ -603,9 +603,9 @@ static void lcd_move_menu() { START_MENU(); MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu); - MENU_ITEM(submenu, "Move 10mm", lcd_move_menu_10mm); - MENU_ITEM(submenu, "Move 1mm", lcd_move_menu_1mm); - MENU_ITEM(submenu, "Move 0.1mm", lcd_move_menu_01mm); + MENU_ITEM(submenu, MSG_MOVE_10MM, lcd_move_menu_10mm); + MENU_ITEM(submenu, MSG_MOVE_1MM, lcd_move_menu_1mm); + MENU_ITEM(submenu, MSG_MOVE_01MM, lcd_move_menu_01mm); //TODO:X,Y,Z,E END_MENU(); } @@ -727,7 +727,7 @@ static void lcd_control_motion_menu() MENU_ITEM_EDIT(float51, MSG_ZSTEPS, &axis_steps_per_unit[Z_AXIS], 5, 9999); MENU_ITEM_EDIT(float51, MSG_ESTEPS, &axis_steps_per_unit[E_AXIS], 5, 9999); #ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED - MENU_ITEM_EDIT(bool, "Endstop abort", &abort_on_endstop_hit); + MENU_ITEM_EDIT(bool, MSG_ENDSTOP_ABORT, &abort_on_endstop_hit); #endif END_MENU(); } @@ -746,7 +746,7 @@ static void lcd_set_contrast() } if (lcdDrawUpdate) { - lcd_implementation_drawedit(PSTR("Contrast"), itostr2(lcd_contrast)); + lcd_implementation_drawedit(PSTR(MSG_CONTRAST), itostr2(lcd_contrast)); } if (LCD_CLICKED) {