MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge pull request #10178 from thinkyhead/bf1_auto_reset_stepper_timeout

Browse Source 
[1.1.x] Automatically reset stepper timeout
This commit is contained in:
Scott Lahteine 2018-03-21 19:25:15 -05:00 committed by GitHub
commit 1e41d157a3
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
7 changed files with 46 additions and 62 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/Marlin.h
View File

@ -207,8 +207,8 @@ void clear_command_queue();
#endif
#endif
extern millis_t previous_cmd_ms;
inline void refresh_cmd_timeout() { previous_cmd_ms = millis(); }
extern millis_t previous_move_ms;
inline void reset_stepper_timeout() { previous_move_ms = millis(); }
/**
* Feedrate scaling and conversion

48
Marlin/Marlin_main.cpp
View File

@ -522,7 +522,7 @@ const char axis_codes[XYZE] = { 'X', 'Y', 'Z', 'E' };
static int serial_count; // = 0;
// Inactivity shutdown
millis_t previous_cmd_ms; // = 0;
millis_t previous_move_ms; // = 0;
static millis_t max_inactive_time; // = 0;
static millis_t stepper_inactive_time = (DEFAULT_STEPPER_DEACTIVE_TIME) * 1000UL;
@ -1539,8 +1539,6 @@ inline void buffer_line_to_destination(const float &fr_mm_s) {
if (DEBUGGING(LEVELING)) DEBUG_POS("prepare_uninterpolated_move_to_destination", destination);
#endif
refresh_cmd_timeout();
#if UBL_SEGMENTED
// ubl segmented line will do z-only moves in single segment
ubl.prepare_segmented_line_to(destination, MMS_SCALED(fr_mm_s ? fr_mm_s : feedrate_mm_s));
@ -1705,7 +1703,6 @@ static void setup_for_endstop_or_probe_move() {
saved_feedrate_mm_s = feedrate_mm_s;
saved_feedrate_percentage = feedrate_percentage;
feedrate_percentage = 100;
refresh_cmd_timeout();
}
static void clean_up_after_endstop_or_probe_move() {
@ -1714,7 +1711,6 @@ static void clean_up_after_endstop_or_probe_move() {
#endif
feedrate_mm_s = saved_feedrate_mm_s;
feedrate_percentage = saved_feedrate_percentage;
refresh_cmd_timeout();
}
#if HAS_AXIS_UNHOMED_ERR
@ -2227,9 +2223,6 @@ static void clean_up_after_endstop_or_probe_move() {
if (DEBUGGING(LEVELING)) DEBUG_POS(">>> run_z_probe", current_position);
#endif
// Prevent stepper_inactive_time from running out and EXTRUDER_RUNOUT_PREVENT from extruding
refresh_cmd_timeout();
// Double-probing does a fast probe followed by a slow probe
#if MULTIPLE_PROBING == 2
@ -3360,7 +3353,6 @@ inline void gcode_G0_G1(
// Send the arc to the planner
plan_arc(destination, arc_offset, clockwise);
refresh_cmd_timeout();
}
else {
// Bad arguments
@ -3373,8 +3365,7 @@ inline void gcode_G0_G1(
#endif // ARC_SUPPORT
void dwell(millis_t time) {
refresh_cmd_timeout();
time += previous_cmd_ms;
time += millis();
while (PENDING(millis(), time)) idle();
}
@ -6236,10 +6227,9 @@ inline void gcode_G92() {
wait_for_user = true;
stepper.synchronize();
refresh_cmd_timeout();
if (ms > 0) {
ms += previous_cmd_ms; // wait until this time for a click
ms += millis(); // wait until this time for a click
while (PENDING(millis(), ms) && wait_for_user) idle();
}
else {
@ -7198,8 +7188,6 @@ inline void gcode_M42() {
}
if (probe_inverting != deploy_state) SERIAL_PROTOCOLLNPGM("WARNING - INVERTING setting probably backwards");
refresh_cmd_timeout();
if (deploy_state != stow_state) {
SERIAL_PROTOCOLLNPGM("BLTouch clone detected");
if (deploy_state) {
@ -7226,8 +7214,7 @@ inline void gcode_M42() {
safe_delay(2);
if (0 == j % (500 * 1)) // keep cmd_timeout happy
refresh_cmd_timeout();
if (0 == j % (500 * 1)) reset_stepper_timeout(); // Keep steppers powered
if (deploy_state != READ(PROBE_TEST_PIN)) { // probe triggered
@ -7921,7 +7908,7 @@ inline void gcode_M109() {
}
idle();
refresh_cmd_timeout(); // to prevent stepper_inactive_time from running out
reset_stepper_timeout(); // Keep steppers powered
const float temp = thermalManager.degHotend(target_extruder);
@ -8058,7 +8045,7 @@ inline void gcode_M109() {
}
idle();
refresh_cmd_timeout(); // to prevent stepper_inactive_time from running out
reset_stepper_timeout(); // Keep steppers powered
const float temp = thermalManager.degBed();
@ -12199,6 +12186,8 @@ void process_next_command() {
#endif
}
reset_stepper_timeout(); // Keep steppers powered
// Parse the next command in the queue
parser.parse(current_command);
process_parsed_command();
@ -12226,7 +12215,6 @@ void flush_and_request_resend() {
* B<int> Block queue space remaining
*/
void ok_to_send() {
refresh_cmd_timeout();
if (!send_ok[cmd_queue_index_r]) return;
SERIAL_PROTOCOLPGM(MSG_OK);
#if ENABLED(ADVANCED_OK)
@ -13074,7 +13062,6 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
*/
void prepare_move_to_destination() {
clamp_to_software_endstops(destination);
refresh_cmd_timeout();
#if ENABLED(PREVENT_COLD_EXTRUSION) || ENABLED(PREVENT_LENGTHY_EXTRUDE)
@ -13504,7 +13491,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
const millis_t ms = millis();
if (max_inactive_time && ELAPSED(ms, previous_cmd_ms + max_inactive_time)) {
if (max_inactive_time && ELAPSED(ms, previous_move_ms + max_inactive_time)) {
SERIAL_ERROR_START();
SERIAL_ECHOLNPAIR(MSG_KILL_INACTIVE_TIME, parser.command_ptr);
kill(PSTR(MSG_KILLED));
@ -13517,8 +13504,10 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
#define MOVE_AWAY_TEST true
#endif
if (MOVE_AWAY_TEST && stepper_inactive_time && ELAPSED(ms, previous_cmd_ms + stepper_inactive_time)
&& !ignore_stepper_queue && !planner.blocks_queued()) {
if (stepper_inactive_time) {
if (planner.has_blocks_queued())
previous_move_ms = ms; // reset_stepper_timeout to keep steppers powered
else if (MOVE_AWAY_TEST && !ignore_stepper_queue && ELAPSED(ms, previous_move_ms + stepper_inactive_time)) {
#if ENABLED(DISABLE_INACTIVE_X)
disable_X();
#endif
@ -13535,6 +13524,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
if (ubl.lcd_map_control) ubl.lcd_map_control = defer_return_to_status = false;
#endif
}
}
#ifdef CHDK // Check if pin should be set to LOW after M240 set it to HIGH
if (chdkActive && ELAPSED(ms, chdkHigh + CHDK_DELAY)) {
@ -13592,8 +13582,8 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
#if ENABLED(EXTRUDER_RUNOUT_PREVENT)
if (thermalManager.degHotend(active_extruder) > EXTRUDER_RUNOUT_MINTEMP
&& ELAPSED(ms, previous_cmd_ms + (EXTRUDER_RUNOUT_SECONDS) * 1000UL)
&& !planner.blocks_queued()
&& ELAPSED(ms, previous_move_ms + (EXTRUDER_RUNOUT_SECONDS) * 1000UL)
&& !planner.has_blocks_queued()
) {
#if ENABLED(SWITCHING_EXTRUDER)
const bool oldstatus = E0_ENABLE_READ;
@ -13617,8 +13607,6 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
}
#endif // !SWITCHING_EXTRUDER
previous_cmd_ms = ms; // refresh_cmd_timeout()
const float olde = current_position[E_AXIS];
current_position[E_AXIS] += EXTRUDER_RUNOUT_EXTRUDE;
planner.buffer_line_kinematic(current_position, MMM_TO_MMS(EXTRUDER_RUNOUT_SPEED), active_extruder);
@ -13644,6 +13632,8 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
#endif // E_STEPPERS > 1
}
#endif // !SWITCHING_EXTRUDER
previous_move_ms = ms; // reset_stepper_timeout to keep steppers powered
}
#endif // EXTRUDER_RUNOUT_PREVENT
@ -13702,7 +13692,7 @@ void idle(
#if ENABLED(I2C_POSITION_ENCODERS)
static millis_t i2cpem_next_update_ms;
if (planner.blocks_queued() && ELAPSED(millis(), i2cpem_next_update_ms)) {
if (planner.has_blocks_queued() && ELAPSED(millis(), i2cpem_next_update_ms)) {
I2CPEM.update();
i2cpem_next_update_ms = millis() + I2CPE_MIN_UPD_TIME_MS;
}

4
Marlin/planner.cpp
View File

@ -457,7 +457,7 @@ void Planner::check_axes_activity() {
#endif
#endif
if (blocks_queued()) {
if (has_blocks_queued()) {
#if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++)
@ -1536,7 +1536,7 @@ void Planner::buffer_segment(const float &a, const float &b, const float &c, con
//*/
// Always split the first move into two (if not homing or probing)
if (!blocks_queued()) {
if (!has_blocks_queued()) {
#define _BETWEEN(A) (position[A##_AXIS] + target[A##_AXIS]) >> 1
const int32_t between[ABCE] = { _BETWEEN(A), _BETWEEN(B), _BETWEEN(C), _BETWEEN(E) };

8
Marlin/planner.h
View File

@ -508,14 +508,14 @@ class Planner {
/**
* Does the buffer have any blocks queued?
*/
static bool blocks_queued() { return (block_buffer_head != block_buffer_tail); }
static inline bool has_blocks_queued() { return (block_buffer_head != block_buffer_tail); }
/**
* "Discard" the block and "release" the memory.
* Called when the current block is no longer needed.
*/
FORCE_INLINE static void discard_current_block() {
if (blocks_queued())
if (has_blocks_queued())
block_buffer_tail = BLOCK_MOD(block_buffer_tail + 1);
}
@ -524,7 +524,7 @@ class Planner {
* Called after an interrupted move to throw away the rest of the move.
*/
FORCE_INLINE static bool discard_continued_block() {
const bool discard = blocks_queued() && TEST(block_buffer[block_buffer_tail].flag, BLOCK_BIT_CONTINUED);
const bool discard = has_blocks_queued() && TEST(block_buffer[block_buffer_tail].flag, BLOCK_BIT_CONTINUED);
if (discard) discard_current_block();
return discard;
}
@ -535,7 +535,7 @@ class Planner {
* WARNING: Called from Stepper ISR context!
*/
static block_t* get_current_block() {
if (blocks_queued()) {
if (has_blocks_queued()) {
block_t * const block = &block_buffer[block_buffer_tail];
// If the block has no trapezoid calculated, it's unsafe to execute.

4
Marlin/stepper.cpp
View File

@ -1112,7 +1112,7 @@ void Stepper::init() {
/**
* Block until all buffered steps are executed / cleaned
*/
void Stepper::synchronize() { while (planner.blocks_queued() || cleaning_buffer_counter) idle(); }
void Stepper::synchronize() { while (planner.has_blocks_queued() || cleaning_buffer_counter) idle(); }
/**
* Set the stepper positions directly in steps
@ -1212,7 +1212,7 @@ void Stepper::finish_and_disable() {
void Stepper::quick_stop() {
cleaning_buffer_counter = 5000;
DISABLE_STEPPER_DRIVER_INTERRUPT();
while (planner.blocks_queued()) planner.discard_current_block();
while (planner.has_blocks_queued()) planner.discard_current_block();
current_block = NULL;
ENABLE_STEPPER_DRIVER_INTERRUPT();
#if ENABLED(ULTRA_LCD)

2
Marlin/ubl_G29.cpp
View File

@ -774,7 +774,7 @@
wait_for_release();
while (!is_lcd_clicked()) {
idle();
refresh_cmd_timeout();
reset_stepper_timeout(); // Keep steppers powered
if (encoder_diff) {
do_blocking_move_to_z(current_position[Z_AXIS] + float(encoder_diff) * multiplier);
encoder_diff = 0;

8
Marlin/ultralcd.cpp
View File

@ -1880,7 +1880,6 @@ void kill_screen(const char* lcd_msg) {
// Encoder knob or keypad buttons adjust the Z position
//
if (encoderPosition) {
refresh_cmd_timeout();
const float z = current_position[Z_AXIS] + float((int32_t)encoderPosition) * (MBL_Z_STEP);
line_to_z(constrain(z, -(LCD_PROBE_Z_RANGE) * 0.5, (LCD_PROBE_Z_RANGE) * 0.5));
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
@ -2403,7 +2402,6 @@ void kill_screen(const char* lcd_msg) {
stepper.cleaning_buffer_counter = 0;
set_current_from_steppers_for_axis(ALL_AXES);
sync_plan_position();
refresh_cmd_timeout();
}
void _lcd_ubl_output_map_lcd() {
@ -2418,10 +2416,7 @@ void kill_screen(const char* lcd_msg) {
if (encoderPosition) {
step_scaler += (int32_t)encoderPosition;
x_plot += step_scaler / (ENCODER_STEPS_PER_MENU_ITEM);
if (abs(step_scaler) >= ENCODER_STEPS_PER_MENU_ITEM)
step_scaler = 0;
refresh_cmd_timeout();
if (abs(step_scaler) >= ENCODER_STEPS_PER_MENU_ITEM) step_scaler = 0;
encoderPosition = 0;
lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
}
@ -2903,7 +2898,6 @@ void kill_screen(const char* lcd_msg) {
if (use_click()) { return lcd_goto_previous_menu_no_defer(); }
ENCODER_DIRECTION_NORMAL();
if (encoderPosition && !processing_manual_move) {
refresh_cmd_timeout();
// Start with no limits to movement
float min = current_position[axis] - 1000,