MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add code_value_short and SERIAL_CHAR

Browse Source
This commit is contained in:
Scott Lahteine 2015-04-03 21:43:30 -07:00
parent e0d4368cb5
commit 1e5c18bb14
5 changed files with 122 additions and 114 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
Marlin/Marlin.h
View File

@ -62,31 +62,33 @@
#define MYSERIAL MSerial #define MYSERIAL MSerial
#endif #endif
#define SERIAL_PROTOCOL(x) (MYSERIAL.print(x)) #define SERIAL_CHAR(x) MYSERIAL.write(x)
#define SERIAL_PROTOCOL_F(x,y) (MYSERIAL.print(x,y)) #define SERIAL_EOL SERIAL_CHAR('\n')
#define SERIAL_PROTOCOLPGM(x) (serialprintPGM(PSTR(x)))
#define SERIAL_PROTOCOLLN(x) (MYSERIAL.print(x),MYSERIAL.write('\n')) #define SERIAL_PROTOCOLCHAR(x) SERIAL_CHAR(x)
#define SERIAL_PROTOCOLLNPGM(x) (serialprintPGM(PSTR(x)),MYSERIAL.write('\n')) #define SERIAL_PROTOCOL(x) MYSERIAL.print(x)
#define SERIAL_PROTOCOL_F(x,y) MYSERIAL.print(x,y)
#define SERIAL_PROTOCOLPGM(x) serialprintPGM(PSTR(x))
#define SERIAL_PROTOCOLLN(x) do{ MYSERIAL.print(x),MYSERIAL.write('\n'); }while(0)
#define SERIAL_PROTOCOLLNPGM(x) do{ serialprintPGM(PSTR(x)),MYSERIAL.write('\n'); }while(0)
extern const char errormagic[] PROGMEM; extern const char errormagic[] PROGMEM;
extern const char echomagic[] PROGMEM; extern const char echomagic[] PROGMEM;
#define SERIAL_ERROR_START (serialprintPGM(errormagic)) #define SERIAL_ERROR_START serialprintPGM(errormagic)
#define SERIAL_ERROR(x) SERIAL_PROTOCOL(x) #define SERIAL_ERROR(x) SERIAL_PROTOCOL(x)
#define SERIAL_ERRORPGM(x) SERIAL_PROTOCOLPGM(x) #define SERIAL_ERRORPGM(x) SERIAL_PROTOCOLPGM(x)
#define SERIAL_ERRORLN(x) SERIAL_PROTOCOLLN(x) #define SERIAL_ERRORLN(x) SERIAL_PROTOCOLLN(x)
#define SERIAL_ERRORLNPGM(x) SERIAL_PROTOCOLLNPGM(x) #define SERIAL_ERRORLNPGM(x) SERIAL_PROTOCOLLNPGM(x)
#define SERIAL_ECHO_START (serialprintPGM(echomagic)) #define SERIAL_ECHO_START serialprintPGM(echomagic)
#define SERIAL_ECHO(x) SERIAL_PROTOCOL(x) #define SERIAL_ECHO(x) SERIAL_PROTOCOL(x)
#define SERIAL_ECHOPGM(x) SERIAL_PROTOCOLPGM(x) #define SERIAL_ECHOPGM(x) SERIAL_PROTOCOLPGM(x)
#define SERIAL_ECHOLN(x) SERIAL_PROTOCOLLN(x) #define SERIAL_ECHOLN(x) SERIAL_PROTOCOLLN(x)
#define SERIAL_ECHOLNPGM(x) SERIAL_PROTOCOLLNPGM(x) #define SERIAL_ECHOLNPGM(x) SERIAL_PROTOCOLLNPGM(x)
#define SERIAL_ECHOPAIR(name,value) (serial_echopair_P(PSTR(name),(value))) #define SERIAL_ECHOPAIR(name,value) do{ serial_echopair_P(PSTR(name),(value)); }while(0)
#define SERIAL_EOL MYSERIAL.write('\n')
void serial_echopair_P(const char *s_P, float v); void serial_echopair_P(const char *s_P, float v);
void serial_echopair_P(const char *s_P, double v); void serial_echopair_P(const char *s_P, double v);

3
Marlin/MarlinSerial.cpp
View File

@ -268,8 +268,7 @@ void MarlinSerial::printFloat(double number, uint8_t digits) {
print(int_part); print(int_part);
// Print the decimal point, but only if there are digits beyond // Print the decimal point, but only if there are digits beyond
if (digits > 0) if (digits > 0) print('.');
print(".");
// Extract digits from the remainder one at a time // Extract digits from the remainder one at a time
while (digits-- > 0) { while (digits-- > 0) {

189
Marlin/Marlin_main.cpp
View File

@ -242,7 +242,7 @@ static unsigned long max_inactive_time = 0;
static unsigned long stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME*1000l; static unsigned long stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME*1000l;
unsigned long starttime = 0; ///< Print job start time unsigned long starttime = 0; ///< Print job start time
unsigned long stoptime = 0; ///< Print job stop time unsigned long stoptime = 0; ///< Print job stop time
static uint8_t tmp_extruder; static uint8_t target_extruder;
bool Stopped = false; bool Stopped = false;
bool CooldownNoWait = true; bool CooldownNoWait = true;
bool target_direction; bool target_direction;
@ -856,7 +856,9 @@ float code_value() {
return ret; return ret;
} }
long code_value_long() { return (strtol(strchr_pointer + 1, NULL, 10)); } long code_value_long() { return strtol(strchr_pointer + 1, NULL, 10); }
int16_t code_value_short() { return (int16_t)strtol(strchr_pointer + 1, NULL, 10); }
bool code_seen(char code) { bool code_seen(char code) {
strchr_pointer = strchr(cmdbuffer[bufindr], code); strchr_pointer = strchr(cmdbuffer[bufindr], code);
@ -1409,9 +1411,9 @@ inline void sync_plan_position() {
for (int y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) { for (int y = 0; y < AUTO_BED_LEVELING_GRID_POINTS; y++) {
for (int x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) { for (int x = 0; x < AUTO_BED_LEVELING_GRID_POINTS; x++) {
SERIAL_PROTOCOL_F(bed_level[x][y], 2); SERIAL_PROTOCOL_F(bed_level[x][y], 2);
SERIAL_PROTOCOLPGM(" "); SERIAL_PROTOCOLCHAR(' ');
} }
SERIAL_ECHOLN(""); SERIAL_EOL;
} }
} }
@ -1684,7 +1686,7 @@ inline void gcode_G2_G3(bool clockwise) {
* G4: Dwell S<seconds> or P<milliseconds> * G4: Dwell S<seconds> or P<milliseconds>
*/ */
inline void gcode_G4() { inline void gcode_G4() {
unsigned long codenum=0; unsigned long codenum = 0;
LCD_MESSAGEPGM(MSG_DWELL); LCD_MESSAGEPGM(MSG_DWELL);
@ -1710,7 +1712,7 @@ inline void gcode_G4() {
inline void gcode_G10_G11(bool doRetract=false) { inline void gcode_G10_G11(bool doRetract=false) {
#if EXTRUDERS > 1 #if EXTRUDERS > 1
if (doRetract) { if (doRetract) {
retracted_swap[active_extruder] = (code_seen('S') && code_value_long() == 1); // checks for swap retract argument retracted_swap[active_extruder] = (code_seen('S') && code_value_short() == 1); // checks for swap retract argument
} }
#endif #endif
retract(doRetract retract(doRetract
@ -2028,7 +2030,7 @@ inline void gcode_G28() {
inline void gcode_G29() { inline void gcode_G29() {
static int probe_point = -1; static int probe_point = -1;
MeshLevelingState state = code_seen('S') || code_seen('s') ? (MeshLevelingState)code_value_long() : MeshReport; MeshLevelingState state = code_seen('S') || code_seen('s') ? (MeshLevelingState)code_value_short() : MeshReport;
if (state < 0 || state > 2) { if (state < 0 || state > 2) {
SERIAL_PROTOCOLLNPGM("S out of range (0-2)."); SERIAL_PROTOCOLLNPGM("S out of range (0-2).");
return; return;
@ -2039,7 +2041,7 @@ inline void gcode_G28() {
if (mbl.active) { if (mbl.active) {
SERIAL_PROTOCOLPGM("Num X,Y: "); SERIAL_PROTOCOLPGM("Num X,Y: ");
SERIAL_PROTOCOL(MESH_NUM_X_POINTS); SERIAL_PROTOCOL(MESH_NUM_X_POINTS);
SERIAL_PROTOCOLPGM(","); SERIAL_PROTOCOLCHAR(',');
SERIAL_PROTOCOL(MESH_NUM_Y_POINTS); SERIAL_PROTOCOL(MESH_NUM_Y_POINTS);
SERIAL_PROTOCOLPGM("\nZ search height: "); SERIAL_PROTOCOLPGM("\nZ search height: ");
SERIAL_PROTOCOL(MESH_HOME_SEARCH_Z); SERIAL_PROTOCOL(MESH_HOME_SEARCH_Z);
@ -2155,7 +2157,7 @@ inline void gcode_G28() {
return; return;
} }
int verbose_level = code_seen('V') || code_seen('v') ? code_value_long() : 1; int verbose_level = code_seen('V') || code_seen('v') ? code_value_short() : 1;
if (verbose_level < 0 || verbose_level > 4) { if (verbose_level < 0 || verbose_level > 4) {
SERIAL_ECHOLNPGM("?(V)erbose Level is implausible (0-4)."); SERIAL_ECHOLNPGM("?(V)erbose Level is implausible (0-4).");
return; return;
@ -2177,19 +2179,19 @@ inline void gcode_G28() {
int auto_bed_leveling_grid_points = AUTO_BED_LEVELING_GRID_POINTS; int auto_bed_leveling_grid_points = AUTO_BED_LEVELING_GRID_POINTS;
#ifndef DELTA #ifndef DELTA
if (code_seen('P')) auto_bed_leveling_grid_points = code_value_long(); if (code_seen('P')) auto_bed_leveling_grid_points = code_value_short();
if (auto_bed_leveling_grid_points < 2) { if (auto_bed_leveling_grid_points < 2) {
SERIAL_PROTOCOLPGM("?Number of probed (P)oints is implausible (2 minimum).\n"); SERIAL_PROTOCOLPGM("?Number of probed (P)oints is implausible (2 minimum).\n");
return; return;
} }
#endif #endif
xy_travel_speed = code_seen('S') ? code_value_long() : XY_TRAVEL_SPEED; xy_travel_speed = code_seen('S') ? code_value_short() : XY_TRAVEL_SPEED;
int left_probe_bed_position = code_seen('L') ? code_value_long() : LEFT_PROBE_BED_POSITION, int left_probe_bed_position = code_seen('L') ? code_value_short() : LEFT_PROBE_BED_POSITION,
right_probe_bed_position = code_seen('R') ? code_value_long() : RIGHT_PROBE_BED_POSITION, right_probe_bed_position = code_seen('R') ? code_value_short() : RIGHT_PROBE_BED_POSITION,
front_probe_bed_position = code_seen('F') ? code_value_long() : FRONT_PROBE_BED_POSITION, front_probe_bed_position = code_seen('F') ? code_value_short() : FRONT_PROBE_BED_POSITION,
back_probe_bed_position = code_seen('B') ? code_value_long() : BACK_PROBE_BED_POSITION; back_probe_bed_position = code_seen('B') ? code_value_short() : BACK_PROBE_BED_POSITION;
bool left_out_l = left_probe_bed_position < MIN_PROBE_X, bool left_out_l = left_probe_bed_position < MIN_PROBE_X,
left_out = left_out_l || left_probe_bed_position > right_probe_bed_position - MIN_PROBE_EDGE, left_out = left_out_l || left_probe_bed_position > right_probe_bed_position - MIN_PROBE_EDGE,
@ -2393,7 +2395,7 @@ inline void gcode_G28() {
if (diff >= 0.0) if (diff >= 0.0)
SERIAL_PROTOCOLPGM(" +"); // Include + for column alignment SERIAL_PROTOCOLPGM(" +"); // Include + for column alignment
else else
SERIAL_PROTOCOLPGM(" "); SERIAL_PROTOCOLCHAR(' ');
SERIAL_PROTOCOL_F(diff, 5); SERIAL_PROTOCOL_F(diff, 5);
} // xx } // xx
SERIAL_EOL; SERIAL_EOL;
@ -2517,11 +2519,11 @@ inline void gcode_G92() {
unsigned long codenum = 0; unsigned long codenum = 0;
bool hasP = false, hasS = false; bool hasP = false, hasS = false;
if (code_seen('P')) { if (code_seen('P')) {
codenum = code_value(); // milliseconds to wait codenum = code_value_short(); // milliseconds to wait
hasP = codenum > 0; hasP = codenum > 0;
} }
if (code_seen('S')) { if (code_seen('S')) {
codenum = code_value() * 1000; // seconds to wait codenum = code_value_short() * 1000UL; // seconds to wait
hasS = codenum > 0; hasS = codenum > 0;
} }
char* starpos = strchr(src, '*'); char* starpos = strchr(src, '*');
@ -2633,7 +2635,7 @@ inline void gcode_M17() {
*/ */
inline void gcode_M26() { inline void gcode_M26() {
if (card.cardOK && code_seen('S')) if (card.cardOK && code_seen('S'))
card.setIndex(code_value_long()); card.setIndex(code_value_short());
} }
/** /**
@ -2724,7 +2726,7 @@ inline void gcode_M31() {
card.openFile(namestartpos, true, !call_procedure); card.openFile(namestartpos, true, !call_procedure);
if (code_seen('S') && strchr_pointer < namestartpos) // "S" (must occur _before_ the filename!) if (code_seen('S') && strchr_pointer < namestartpos) // "S" (must occur _before_ the filename!)
card.setIndex(code_value_long()); card.setIndex(code_value_short());
card.startFileprint(); card.startFileprint();
if (!call_procedure) if (!call_procedure)
@ -2752,11 +2754,11 @@ inline void gcode_M31() {
*/ */
inline void gcode_M42() { inline void gcode_M42() {
if (code_seen('S')) { if (code_seen('S')) {
int pin_status = code_value(), int pin_status = code_value_short(),
pin_number = LED_PIN; pin_number = LED_PIN;
if (code_seen('P') && pin_status >= 0 && pin_status <= 255) if (code_seen('P') && pin_status >= 0 && pin_status <= 255)
pin_number = code_value(); pin_number = code_value_short();
for (int8_t i = 0; i < (int8_t)(sizeof(sensitive_pins) / sizeof(*sensitive_pins)); i++) { for (int8_t i = 0; i < (int8_t)(sizeof(sensitive_pins) / sizeof(*sensitive_pins)); i++) {
if (sensitive_pins[i] == pin_number) { if (sensitive_pins[i] == pin_number) {
@ -2815,7 +2817,7 @@ inline void gcode_M42() {
int verbose_level = 1, n_samples = 10, n_legs = 0; int verbose_level = 1, n_samples = 10, n_legs = 0;
if (code_seen('V') || code_seen('v')) { if (code_seen('V') || code_seen('v')) {
verbose_level = code_value(); verbose_level = code_value_short();
if (verbose_level < 0 || verbose_level > 4 ) { if (verbose_level < 0 || verbose_level > 4 ) {
SERIAL_PROTOCOLPGM("?Verbose Level not plausible (0-4).\n"); SERIAL_PROTOCOLPGM("?Verbose Level not plausible (0-4).\n");
return; return;
@ -2826,7 +2828,7 @@ inline void gcode_M42() {
SERIAL_PROTOCOLPGM("M48 Z-Probe Repeatability test\n"); SERIAL_PROTOCOLPGM("M48 Z-Probe Repeatability test\n");
if (code_seen('P') || code_seen('p') || code_seen('n')) { // `n` for legacy support only - please use `P`! if (code_seen('P') || code_seen('p') || code_seen('n')) { // `n` for legacy support only - please use `P`!
n_samples = code_value(); n_samples = code_value_short();
if (n_samples < 4 || n_samples > 50) { if (n_samples < 4 || n_samples > 50) {
SERIAL_PROTOCOLPGM("?Sample size not plausible (4-50).\n"); SERIAL_PROTOCOLPGM("?Sample size not plausible (4-50).\n");
return; return;
@ -2859,7 +2861,7 @@ inline void gcode_M42() {
} }
if (code_seen('L') || code_seen('l')) { if (code_seen('L') || code_seen('l')) {
n_legs = code_value(); n_legs = code_value_short();
if (n_legs == 1) n_legs = 2; if (n_legs == 1) n_legs = 2;
if (n_legs < 0 || n_legs > 15) { if (n_legs < 0 || n_legs > 15) {
SERIAL_PROTOCOLPGM("?Number of legs in movement not plausible (0-15).\n"); SERIAL_PROTOCOLPGM("?Number of legs in movement not plausible (0-15).\n");
@ -3041,12 +3043,15 @@ inline void gcode_M42() {
inline void gcode_M104() { inline void gcode_M104() {
if (setTargetedHotend(104)) return; if (setTargetedHotend(104)) return;
if (code_seen('S')) setTargetHotend(code_value(), tmp_extruder); if (code_seen('S')) {
float temp = code_value();
setTargetHotend(temp, target_extruder);
#ifdef DUAL_X_CARRIAGE #ifdef DUAL_X_CARRIAGE
if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && tmp_extruder == 0) if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0)
setTargetHotend1(code_value() == 0.0 ? 0.0 : code_value() + duplicate_extruder_temp_offset); setTargetHotend1(temp == 0.0 ? 0.0 : temp + duplicate_extruder_temp_offset);
#endif #endif
setWatch(); setWatch();
}
} }
/** /**
@ -3057,9 +3062,9 @@ inline void gcode_M105() {
#if HAS_TEMP_0 #if HAS_TEMP_0
SERIAL_PROTOCOLPGM("ok T:"); SERIAL_PROTOCOLPGM("ok T:");
SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1); SERIAL_PROTOCOL_F(degHotend(target_extruder),1);
SERIAL_PROTOCOLPGM(" /"); SERIAL_PROTOCOLPGM(" /");
SERIAL_PROTOCOL_F(degTargetHotend(tmp_extruder),1); SERIAL_PROTOCOL_F(degTargetHotend(target_extruder),1);
#if HAS_TEMP_BED #if HAS_TEMP_BED
SERIAL_PROTOCOLPGM(" B:"); SERIAL_PROTOCOLPGM(" B:");
SERIAL_PROTOCOL_F(degBed(),1); SERIAL_PROTOCOL_F(degBed(),1);
@ -3069,7 +3074,7 @@ inline void gcode_M105() {
for (int8_t cur_extruder = 0; cur_extruder < EXTRUDERS; ++cur_extruder) { for (int8_t cur_extruder = 0; cur_extruder < EXTRUDERS; ++cur_extruder) {
SERIAL_PROTOCOLPGM(" T"); SERIAL_PROTOCOLPGM(" T");
SERIAL_PROTOCOL(cur_extruder); SERIAL_PROTOCOL(cur_extruder);
SERIAL_PROTOCOLPGM(":"); SERIAL_PROTOCOLCHAR(':');
SERIAL_PROTOCOL_F(degHotend(cur_extruder),1); SERIAL_PROTOCOL_F(degHotend(cur_extruder),1);
SERIAL_PROTOCOLPGM(" /"); SERIAL_PROTOCOLPGM(" /");
SERIAL_PROTOCOL_F(degTargetHotend(cur_extruder),1); SERIAL_PROTOCOL_F(degTargetHotend(cur_extruder),1);
@ -3081,16 +3086,16 @@ inline void gcode_M105() {
SERIAL_PROTOCOLPGM(" @:"); SERIAL_PROTOCOLPGM(" @:");
#ifdef EXTRUDER_WATTS #ifdef EXTRUDER_WATTS
SERIAL_PROTOCOL((EXTRUDER_WATTS * getHeaterPower(tmp_extruder))/127); SERIAL_PROTOCOL((EXTRUDER_WATTS * getHeaterPower(target_extruder))/127);
SERIAL_PROTOCOLPGM("W"); SERIAL_PROTOCOLCHAR('W');
#else #else
SERIAL_PROTOCOL(getHeaterPower(tmp_extruder)); SERIAL_PROTOCOL(getHeaterPower(target_extruder));
#endif #endif
SERIAL_PROTOCOLPGM(" B@:"); SERIAL_PROTOCOLPGM(" B@:");
#ifdef BED_WATTS #ifdef BED_WATTS
SERIAL_PROTOCOL((BED_WATTS * getHeaterPower(-1))/127); SERIAL_PROTOCOL((BED_WATTS * getHeaterPower(-1))/127);
SERIAL_PROTOCOLPGM("W"); SERIAL_PROTOCOLCHAR('W');
#else #else
SERIAL_PROTOCOL(getHeaterPower(-1)); SERIAL_PROTOCOL(getHeaterPower(-1));
#endif #endif
@ -3105,7 +3110,7 @@ inline void gcode_M105() {
for (int8_t cur_extruder = 0; cur_extruder < EXTRUDERS; ++cur_extruder) { for (int8_t cur_extruder = 0; cur_extruder < EXTRUDERS; ++cur_extruder) {
SERIAL_PROTOCOLPGM(" T"); SERIAL_PROTOCOLPGM(" T");
SERIAL_PROTOCOL(cur_extruder); SERIAL_PROTOCOL(cur_extruder);
SERIAL_PROTOCOLPGM(":"); SERIAL_PROTOCOLCHAR(':');
SERIAL_PROTOCOL_F(degHotend(cur_extruder),1); SERIAL_PROTOCOL_F(degHotend(cur_extruder),1);
SERIAL_PROTOCOLPGM("C->"); SERIAL_PROTOCOLPGM("C->");
SERIAL_PROTOCOL_F(rawHotendTemp(cur_extruder)/OVERSAMPLENR,0); SERIAL_PROTOCOL_F(rawHotendTemp(cur_extruder)/OVERSAMPLENR,0);
@ -3120,7 +3125,7 @@ inline void gcode_M105() {
/** /**
* M106: Set Fan Speed * M106: Set Fan Speed
*/ */
inline void gcode_M106() { fanSpeed = code_seen('S') ? constrain(code_value(), 0, 255) : 255; } inline void gcode_M106() { fanSpeed = code_seen('S') ? constrain(code_value_short(), 0, 255) : 255; }
/** /**
* M107: Fan Off * M107: Fan Off
@ -3139,10 +3144,11 @@ inline void gcode_M109() {
CooldownNoWait = code_seen('S'); CooldownNoWait = code_seen('S');
if (CooldownNoWait || code_seen('R')) { if (CooldownNoWait || code_seen('R')) {
setTargetHotend(code_value(), tmp_extruder); float temp = code_value();
setTargetHotend(temp, target_extruder);
#ifdef DUAL_X_CARRIAGE #ifdef DUAL_X_CARRIAGE
if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && tmp_extruder == 0) if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0)
setTargetHotend1(code_value() == 0.0 ? 0.0 : code_value() + duplicate_extruder_temp_offset); setTargetHotend1(temp == 0.0 ? 0.0 : temp + duplicate_extruder_temp_offset);
#endif #endif
} }
@ -3158,7 +3164,7 @@ inline void gcode_M109() {
unsigned long timetemp = millis(); unsigned long timetemp = millis();
/* See if we are heating up or cooling down */ /* See if we are heating up or cooling down */
target_direction = isHeatingHotend(tmp_extruder); // true if heating, false if cooling target_direction = isHeatingHotend(target_extruder); // true if heating, false if cooling
cancel_heatup = false; cancel_heatup = false;
@ -3169,15 +3175,15 @@ inline void gcode_M109() {
while((!cancel_heatup)&&((residencyStart == -1) || while((!cancel_heatup)&&((residencyStart == -1) ||
(residencyStart >= 0 && (((unsigned int) (millis() - residencyStart)) < (TEMP_RESIDENCY_TIME * 1000UL)))) ) (residencyStart >= 0 && (((unsigned int) (millis() - residencyStart)) < (TEMP_RESIDENCY_TIME * 1000UL)))) )
#else #else
while ( target_direction ? (isHeatingHotend(tmp_extruder)) : (isCoolingHotend(tmp_extruder)&&(CooldownNoWait==false)) ) while ( target_direction ? (isHeatingHotend(target_extruder)) : (isCoolingHotend(target_extruder)&&(CooldownNoWait==false)) )
#endif //TEMP_RESIDENCY_TIME #endif //TEMP_RESIDENCY_TIME
{ // while loop { // while loop
if (millis() > timetemp + 1000UL) { //Print temp & remaining time every 1s while waiting if (millis() > timetemp + 1000UL) { //Print temp & remaining time every 1s while waiting
SERIAL_PROTOCOLPGM("T:"); SERIAL_PROTOCOLPGM("T:");
SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1); SERIAL_PROTOCOL_F(degHotend(target_extruder),1);
SERIAL_PROTOCOLPGM(" E:"); SERIAL_PROTOCOLPGM(" E:");
SERIAL_PROTOCOL((int)tmp_extruder); SERIAL_PROTOCOL((int)target_extruder);
#ifdef TEMP_RESIDENCY_TIME #ifdef TEMP_RESIDENCY_TIME
SERIAL_PROTOCOLPGM(" W:"); SERIAL_PROTOCOLPGM(" W:");
if (residencyStart > -1) { if (residencyStart > -1) {
@ -3198,9 +3204,9 @@ inline void gcode_M109() {
#ifdef TEMP_RESIDENCY_TIME #ifdef TEMP_RESIDENCY_TIME
// start/restart the TEMP_RESIDENCY_TIME timer whenever we reach target temp for the first time // start/restart the TEMP_RESIDENCY_TIME timer whenever we reach target temp for the first time
// or when current temp falls outside the hysteresis after target temp was reached // or when current temp falls outside the hysteresis after target temp was reached
if ((residencyStart == -1 && target_direction && (degHotend(tmp_extruder) >= (degTargetHotend(tmp_extruder)-TEMP_WINDOW))) || if ((residencyStart == -1 && target_direction && (degHotend(target_extruder) >= (degTargetHotend(target_extruder)-TEMP_WINDOW))) ||
(residencyStart == -1 && !target_direction && (degHotend(tmp_extruder) <= (degTargetHotend(tmp_extruder)+TEMP_WINDOW))) || (residencyStart == -1 && !target_direction && (degHotend(target_extruder) <= (degTargetHotend(target_extruder)+TEMP_WINDOW))) ||
(residencyStart > -1 && labs(degHotend(tmp_extruder) - degTargetHotend(tmp_extruder)) > TEMP_HYSTERESIS) ) (residencyStart > -1 && labs(degHotend(target_extruder) - degTargetHotend(target_extruder)) > TEMP_HYSTERESIS) )
{ {
residencyStart = millis(); residencyStart = millis();
} }
@ -3538,9 +3544,9 @@ inline void gcode_M121() { enable_endstops(true); }
*/ */
inline void gcode_M150() { inline void gcode_M150() {
SendColors( SendColors(
code_seen('R') ? (byte)code_value() : 0, code_seen('R') ? (byte)code_value_short() : 0,
code_seen('U') ? (byte)code_value() : 0, code_seen('U') ? (byte)code_value_short() : 0,
code_seen('B') ? (byte)code_value() : 0 code_seen('B') ? (byte)code_value_short() : 0
); );
} }
@ -3552,9 +3558,9 @@ inline void gcode_M121() { enable_endstops(true); }
* D<millimeters> * D<millimeters>
*/ */
inline void gcode_M200() { inline void gcode_M200() {
tmp_extruder = active_extruder; int tmp_extruder = active_extruder;
if (code_seen('T')) { if (code_seen('T')) {
tmp_extruder = code_value(); tmp_extruder = code_value_short();
if (tmp_extruder >= EXTRUDERS) { if (tmp_extruder >= EXTRUDERS) {
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHO(MSG_M200_INVALID_EXTRUDER); SERIAL_ECHO(MSG_M200_INVALID_EXTRUDER);
@ -3625,27 +3631,23 @@ inline void gcode_M203() {
* Also sets minimum segment time in ms (B20000) to prevent buffer under-runs and M20 minimum feedrate * Also sets minimum segment time in ms (B20000) to prevent buffer under-runs and M20 minimum feedrate
*/ */
inline void gcode_M204() { inline void gcode_M204() {
if (code_seen('S')) // Kept for legacy compatibility. Should NOT BE USED for new developments. if (code_seen('S')) { // Kept for legacy compatibility. Should NOT BE USED for new developments.
{
acceleration = code_value(); acceleration = code_value();
travel_acceleration = acceleration; travel_acceleration = acceleration;
SERIAL_ECHOPAIR("Setting Printing and Travelling Acceleration: ", acceleration ); SERIAL_ECHOPAIR("Setting Print and Travel Acceleration: ", acceleration );
SERIAL_EOL; SERIAL_EOL;
} }
if (code_seen('P')) if (code_seen('P')) {
{
acceleration = code_value(); acceleration = code_value();
SERIAL_ECHOPAIR("Setting Printing Acceleration: ", acceleration ); SERIAL_ECHOPAIR("Setting Print Acceleration: ", acceleration );
SERIAL_EOL; SERIAL_EOL;
} }
if (code_seen('R')) if (code_seen('R')) {
{
retract_acceleration = code_value(); retract_acceleration = code_value();
SERIAL_ECHOPAIR("Setting Retract Acceleration: ", retract_acceleration ); SERIAL_ECHOPAIR("Setting Retract Acceleration: ", retract_acceleration );
SERIAL_EOL; SERIAL_EOL;
} }
if (code_seen('T')) if (code_seen('T')) {
{
travel_acceleration = code_value(); travel_acceleration = code_value();
SERIAL_ECHOPAIR("Setting Travel Acceleration: ", travel_acceleration ); SERIAL_ECHOPAIR("Setting Travel Acceleration: ", travel_acceleration );
SERIAL_EOL; SERIAL_EOL;
@ -3748,7 +3750,7 @@ inline void gcode_M206() {
*/ */
inline void gcode_M209() { inline void gcode_M209() {
if (code_seen('S')) { if (code_seen('S')) {
int t = code_value(); int t = code_value_short();
switch(t) { switch(t) {
case 0: case 0:
autoretract_enabled = false; autoretract_enabled = false;
@ -3777,23 +3779,23 @@ inline void gcode_M206() {
inline void gcode_M218() { inline void gcode_M218() {
if (setTargetedHotend(218)) return; if (setTargetedHotend(218)) return;
if (code_seen('X')) extruder_offset[X_AXIS][tmp_extruder] = code_value(); if (code_seen('X')) extruder_offset[X_AXIS][target_extruder] = code_value();
if (code_seen('Y')) extruder_offset[Y_AXIS][tmp_extruder] = code_value(); if (code_seen('Y')) extruder_offset[Y_AXIS][target_extruder] = code_value();
#ifdef DUAL_X_CARRIAGE #ifdef DUAL_X_CARRIAGE
if (code_seen('Z')) extruder_offset[Z_AXIS][tmp_extruder] = code_value(); if (code_seen('Z')) extruder_offset[Z_AXIS][target_extruder] = code_value();
#endif #endif
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_HOTEND_OFFSET); SERIAL_ECHOPGM(MSG_HOTEND_OFFSET);
for (tmp_extruder = 0; tmp_extruder < EXTRUDERS; tmp_extruder++) { for (int e = 0; e < EXTRUDERS; e++) {
SERIAL_ECHO(" "); SERIAL_CHAR(' ');
SERIAL_ECHO(extruder_offset[X_AXIS][tmp_extruder]); SERIAL_ECHO(extruder_offset[X_AXIS][e]);
SERIAL_ECHO(","); SERIAL_CHAR(',');
SERIAL_ECHO(extruder_offset[Y_AXIS][tmp_extruder]); SERIAL_ECHO(extruder_offset[Y_AXIS][e]);
#ifdef DUAL_X_CARRIAGE #ifdef DUAL_X_CARRIAGE
SERIAL_ECHO(","); SERIAL_CHAR(',');
SERIAL_ECHO(extruder_offset[Z_AXIS][tmp_extruder]); SERIAL_ECHO(extruder_offset[Z_AXIS][e]);
#endif #endif
} }
SERIAL_EOL; SERIAL_EOL;
@ -3816,7 +3818,7 @@ inline void gcode_M221() {
int sval = code_value(); int sval = code_value();
if (code_seen('T')) { if (code_seen('T')) {
if (setTargetedHotend(221)) return; if (setTargetedHotend(221)) return;
extruder_multiply[tmp_extruder] = sval; extruder_multiply[target_extruder] = sval;
} }
else { else {
extruder_multiply[active_extruder] = sval; extruder_multiply[active_extruder] = sval;
@ -4047,7 +4049,7 @@ inline void gcode_M226() {
* M250: Read and optionally set the LCD contrast * M250: Read and optionally set the LCD contrast
*/ */
inline void gcode_M250() { inline void gcode_M250() {
if (code_seen('C')) lcd_setcontrast(code_value_long() & 0x3F); if (code_seen('C')) lcd_setcontrast(code_value_short() & 0x3F);
SERIAL_PROTOCOLPGM("lcd contrast value: "); SERIAL_PROTOCOLPGM("lcd contrast value: ");
SERIAL_PROTOCOL(lcd_contrast); SERIAL_PROTOCOL(lcd_contrast);
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
@ -4073,8 +4075,8 @@ inline void gcode_M226() {
* C<cycles> * C<cycles>
*/ */
inline void gcode_M303() { inline void gcode_M303() {
int e = code_seen('E') ? code_value_long() : 0; int e = code_seen('E') ? code_value_short() : 0;
int c = code_seen('C') ? code_value_long() : 5; int c = code_seen('C') ? code_value_short() : 5;
float temp = code_seen('S') ? code_value() : (e < 0 ? 70.0 : 150.0); float temp = code_seen('S') ? code_value() : (e < 0 ? 70.0 : 150.0);
PID_autotune(temp, e, c); PID_autotune(temp, e, c);
} }
@ -4483,13 +4485,13 @@ inline void gcode_M503() {
if (code_seen('R')) duplicate_extruder_temp_offset = code_value(); if (code_seen('R')) duplicate_extruder_temp_offset = code_value();
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_HOTEND_OFFSET); SERIAL_ECHOPGM(MSG_HOTEND_OFFSET);
SERIAL_ECHO(" "); SERIAL_CHAR(' ');
SERIAL_ECHO(extruder_offset[X_AXIS][0]); SERIAL_ECHO(extruder_offset[X_AXIS][0]);
SERIAL_ECHO(","); SERIAL_CHAR(',');
SERIAL_ECHO(extruder_offset[Y_AXIS][0]); SERIAL_ECHO(extruder_offset[Y_AXIS][0]);
SERIAL_ECHO(" "); SERIAL_CHAR(' ');
SERIAL_ECHO(duplicate_extruder_x_offset); SERIAL_ECHO(duplicate_extruder_x_offset);
SERIAL_ECHO(","); SERIAL_CHAR(',');
SERIAL_ECHOLN(extruder_offset[Y_AXIS][1]); SERIAL_ECHOLN(extruder_offset[Y_AXIS][1]);
break; break;
case DXC_FULL_CONTROL_MODE: case DXC_FULL_CONTROL_MODE:
@ -4562,7 +4564,7 @@ inline void gcode_M907() {
* S# determines MS1 or MS2, X# sets the pin high/low. * S# determines MS1 or MS2, X# sets the pin high/low.
*/ */
inline void gcode_M351() { inline void gcode_M351() {
if (code_seen('S')) switch(code_value_long()) { if (code_seen('S')) switch(code_value_short()) {
case 1: case 1:
for(int i=0;i<NUM_AXIS;i++) if (code_seen(axis_codes[i])) microstep_ms(i, code_value(), -1); for(int i=0;i<NUM_AXIS;i++) if (code_seen(axis_codes[i])) microstep_ms(i, code_value(), -1);
if (code_seen('B')) microstep_ms(4, code_value(), -1); if (code_seen('B')) microstep_ms(4, code_value(), -1);
@ -4588,21 +4590,26 @@ inline void gcode_M999() {
} }
inline void gcode_T() { inline void gcode_T() {
tmp_extruder = code_value(); int tmp_extruder = code_value();
if (tmp_extruder >= EXTRUDERS) { if (tmp_extruder >= EXTRUDERS) {
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHO("T"); SERIAL_CHAR('T');
SERIAL_ECHO(tmp_extruder); SERIAL_ECHO(tmp_extruder);
SERIAL_ECHOLN(MSG_INVALID_EXTRUDER); SERIAL_ECHOLN(MSG_INVALID_EXTRUDER);
} }
else { else {
target_extruder = tmp_extruder;
#if EXTRUDERS > 1 #if EXTRUDERS > 1
bool make_move = false; bool make_move = false;
#endif #endif
if (code_seen('F')) { if (code_seen('F')) {
#if EXTRUDERS > 1 #if EXTRUDERS > 1
make_move = true; make_move = true;
#endif #endif
next_feedrate = code_value(); next_feedrate = code_value();
if (next_feedrate > 0.0) feedrate = next_feedrate; if (next_feedrate > 0.0) feedrate = next_feedrate;
} }
@ -4692,7 +4699,7 @@ inline void gcode_T() {
void process_commands() { void process_commands() {
if (code_seen('G')) { if (code_seen('G')) {
int gCode = code_value_long(); int gCode = code_value_short();
switch(gCode) { switch(gCode) {
@ -4767,7 +4774,7 @@ void process_commands() {
} }
else if (code_seen('M')) { else if (code_seen('M')) {
switch( code_value_long() ) { switch(code_value_short()) {
#ifdef ULTIPANEL #ifdef ULTIPANEL
case 0: // M0 - Unconditional stop - Wait for user button press on LCD case 0: // M0 - Unconditional stop - Wait for user button press on LCD
case 1: // M1 - Conditional stop - Wait for user button press on LCD case 1: // M1 - Conditional stop - Wait for user button press on LCD
@ -5922,10 +5929,10 @@ void setPwmFrequency(uint8_t pin, int val)
#endif //FAST_PWM_FAN #endif //FAST_PWM_FAN
bool setTargetedHotend(int code){ bool setTargetedHotend(int code){
tmp_extruder = active_extruder; target_extruder = active_extruder;
if(code_seen('T')) { if (code_seen('T')) {
tmp_extruder = code_value(); target_extruder = code_value_short();
if(tmp_extruder >= EXTRUDERS) { if (target_extruder >= EXTRUDERS) {
SERIAL_ECHO_START; SERIAL_ECHO_START;
switch(code){ switch(code){
case 104: case 104:
@ -5944,7 +5951,7 @@ bool setTargetedHotend(int code){
SERIAL_ECHO(MSG_M221_INVALID_EXTRUDER); SERIAL_ECHO(MSG_M221_INVALID_EXTRUDER);
break; break;
} }
SERIAL_ECHOLN(tmp_extruder); SERIAL_ECHOLN(target_extruder);
return true; return true;
} }
} }

12
Marlin/cardreader.cpp
View File

@ -249,7 +249,7 @@ void CardReader::openFile(char* name, bool read, bool replace_current/*=true*/)
if (!myDir.open(curDir, subdirname, O_READ)) { if (!myDir.open(curDir, subdirname, O_READ)) {
SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL); SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(subdirname); SERIAL_PROTOCOL(subdirname);
SERIAL_PROTOCOLLNPGM("."); SERIAL_PROTOCOLCHAR('.');
return; return;
} }
else { else {
@ -287,14 +287,14 @@ void CardReader::openFile(char* name, bool read, bool replace_current/*=true*/)
else { else {
SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL); SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(fname); SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLLNPGM("."); SERIAL_PROTOCOLCHAR('.');
} }
} }
else { //write else { //write
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) { if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) {
SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL); SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(fname); SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLLNPGM("."); SERIAL_PROTOCOLCHAR('.');
} }
else { else {
saving = true; saving = true;
@ -330,7 +330,7 @@ void CardReader::removeFile(char* name) {
if (!myDir.open(curDir, subdirname, O_READ)) { if (!myDir.open(curDir, subdirname, O_READ)) {
SERIAL_PROTOCOLPGM("open failed, File: "); SERIAL_PROTOCOLPGM("open failed, File: ");
SERIAL_PROTOCOL(subdirname); SERIAL_PROTOCOL(subdirname);
SERIAL_PROTOCOLLNPGM("."); SERIAL_PROTOCOLCHAR('.');
return; return;
} }
else { else {
@ -360,7 +360,7 @@ void CardReader::removeFile(char* name) {
else { else {
SERIAL_PROTOCOLPGM("Deletion failed, File: "); SERIAL_PROTOCOLPGM("Deletion failed, File: ");
SERIAL_PROTOCOL(fname); SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLLNPGM("."); SERIAL_PROTOCOLCHAR('.');
} }
} }
@ -368,7 +368,7 @@ void CardReader::getStatus() {
if (cardOK) { if (cardOK) {
SERIAL_PROTOCOLPGM(MSG_SD_PRINTING_BYTE); SERIAL_PROTOCOLPGM(MSG_SD_PRINTING_BYTE);
SERIAL_PROTOCOL(sdpos); SERIAL_PROTOCOL(sdpos);
SERIAL_PROTOCOLPGM("/"); SERIAL_PROTOCOLCHAR('/');
SERIAL_PROTOCOLLN(filesize); SERIAL_PROTOCOLLN(filesize);
} }
else { else {

4
Marlin/vector_3.cpp
View File

@ -125,9 +125,9 @@ void matrix_3x3::debug(const char title[]) {
int count = 0; int count = 0;
for(int i=0; i<3; i++) { for(int i=0; i<3; i++) {
for(int j=0; j<3; j++) { for(int j=0; j<3; j++) {
if (matrix[count] >= 0.0) SERIAL_PROTOCOLPGM("+"); if (matrix[count] >= 0.0) SERIAL_PROTOCOLCHAR('+');
SERIAL_PROTOCOL_F(matrix[count], 6); SERIAL_PROTOCOL_F(matrix[count], 6);
SERIAL_PROTOCOLPGM(" "); SERIAL_PROTOCOLCHAR(' ');
count++; count++;
} }
SERIAL_EOL; SERIAL_EOL;