First MPCNC specific configuration
This commit is contained in:
parent
0640bd0282
commit
262d20aeb6
|
|
@ -90,7 +90,7 @@
|
|||
// boot image unmodified. For an example have a look at the bq Hephestos 2
|
||||
// example configuration folder.
|
||||
//
|
||||
//#define SHOW_CUSTOM_BOOTSCREEN
|
||||
#define SHOW_CUSTOM_BOOTSCREEN
|
||||
// @section machine
|
||||
|
||||
/**
|
||||
|
|
@ -119,12 +119,12 @@
|
|||
// The following define selects which electronics board you have.
|
||||
// Please choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_MKS_13
|
||||
#endif
|
||||
|
||||
// Optional custom name for your RepStrap or other custom machine
|
||||
// Displayed in the LCD "Ready" message
|
||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
||||
#define CUSTOM_MACHINE_NAME "MPCNC"
|
||||
|
||||
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
|
||||
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
|
||||
|
|
@ -286,7 +286,7 @@
|
|||
*
|
||||
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_0 999
|
||||
#define TEMP_SENSOR_1 0
|
||||
#define TEMP_SENSOR_2 0
|
||||
#define TEMP_SENSOR_3 0
|
||||
|
|
@ -473,9 +473,9 @@
|
|||
#define USE_XMIN_PLUG
|
||||
#define USE_YMIN_PLUG
|
||||
#define USE_ZMIN_PLUG
|
||||
//#define USE_XMAX_PLUG
|
||||
//#define USE_YMAX_PLUG
|
||||
//#define USE_ZMAX_PLUG
|
||||
#define USE_XMAX_PLUG
|
||||
#define USE_YMAX_PLUG
|
||||
#define USE_ZMAX_PLUG
|
||||
|
||||
// coarse Endstop Settings
|
||||
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
|
||||
|
|
@ -529,14 +529,14 @@
|
|||
* Override with M92
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 }
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 800, 200 }
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
* Override with M203
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 190, 190, 30, 25 }
|
||||
|
||||
/**
|
||||
* Default Max Acceleration (change/s) change = mm/s
|
||||
|
|
@ -544,7 +544,7 @@
|
|||
* Override with M201
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
|
||||
#define DEFAULT_MAX_ACCELERATION { 500, 500, 35, 10000 }
|
||||
|
||||
/**
|
||||
* Default Acceleration (change/s) change = mm/s
|
||||
|
|
@ -554,9 +554,9 @@
|
|||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves
|
||||
|
||||
/**
|
||||
* Default Jerk (mm/s)
|
||||
|
|
@ -566,9 +566,9 @@
|
|||
* When changing speed and direction, if the difference is less than the
|
||||
* value set here, it may happen instantaneously.
|
||||
*/
|
||||
#define DEFAULT_XJERK 10.0
|
||||
#define DEFAULT_YJERK 10.0
|
||||
#define DEFAULT_ZJERK 0.3
|
||||
#define DEFAULT_XJERK 4.0
|
||||
#define DEFAULT_YJERK 4.0
|
||||
#define DEFAULT_ZJERK 0.2
|
||||
#define DEFAULT_EJERK 5.0
|
||||
|
||||
//===========================================================================
|
||||
|
|
@ -626,7 +626,7 @@
|
|||
* A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
|
||||
* (e.g., an inductive probe or a nozzle-based probe-switch.)
|
||||
*/
|
||||
//#define FIX_MOUNTED_PROBE
|
||||
#define FIX_MOUNTED_PROBE
|
||||
|
||||
/**
|
||||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
|
|
@ -780,8 +780,8 @@
|
|||
// @section machine
|
||||
|
||||
// The size of the print bed
|
||||
#define X_BED_SIZE 200
|
||||
#define Y_BED_SIZE 200
|
||||
#define X_BED_SIZE 800
|
||||
#define Y_BED_SIZE 800
|
||||
|
||||
// Travel limits (mm) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
|
|
@ -801,7 +801,7 @@
|
|||
*/
|
||||
|
||||
// Min software endstops curtail movement below minimum coordinate bounds
|
||||
#define MIN_SOFTWARE_ENDSTOPS
|
||||
//#define MIN_SOFTWARE_ENDSTOPS
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS)
|
||||
#define MIN_SOFTWARE_ENDSTOP_X
|
||||
#define MIN_SOFTWARE_ENDSTOP_Y
|
||||
|
|
@ -809,7 +809,7 @@
|
|||
#endif
|
||||
|
||||
// Max software endstops curtail movement above maximum coordinate bounds
|
||||
#define MAX_SOFTWARE_ENDSTOPS
|
||||
//#define MAX_SOFTWARE_ENDSTOPS
|
||||
#if ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#define MAX_SOFTWARE_ENDSTOP_X
|
||||
#define MAX_SOFTWARE_ENDSTOP_Y
|
||||
|
|
@ -1113,7 +1113,7 @@
|
|||
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
||||
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
|
||||
//
|
||||
//#define EEPROM_SETTINGS // Enable for M500 and M501 commands
|
||||
#define EEPROM_SETTINGS // Enable for M500 and M501 commands
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
|
||||
|
|
@ -1283,7 +1283,7 @@
|
|||
*
|
||||
* :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' }
|
||||
*/
|
||||
#define LCD_LANGUAGE en
|
||||
#define LCD_LANGUAGE de
|
||||
|
||||
/**
|
||||
* LCD Character Set
|
||||
|
|
@ -1329,7 +1329,7 @@
|
|||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
#define SDSUPPORT
|
||||
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
|
|
@ -1377,7 +1377,7 @@
|
|||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
//#define REVERSE_ENCODER_DIRECTION
|
||||
#define REVERSE_ENCODER_DIRECTION
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction for navigating LCD menus.
|
||||
|
|
@ -1392,7 +1392,7 @@
|
|||
//
|
||||
// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
|
||||
//
|
||||
//#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
|
||||
//
|
||||
// SPEAKER/BUZZER
|
||||
|
|
@ -1400,7 +1400,7 @@
|
|||
// If you have a speaker that can produce tones, enable it here.
|
||||
// By default Marlin assumes you have a buzzer with a fixed frequency.
|
||||
//
|
||||
//#define SPEAKER
|
||||
#define SPEAKER
|
||||
|
||||
//
|
||||
// The duration and frequency for the UI feedback sound.
|
||||
|
|
@ -1481,7 +1481,7 @@
|
|||
// RepRapDiscount FULL GRAPHIC Smart Controller
|
||||
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
|
||||
//
|
||||
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
|
||||
//
|
||||
// MakerLab Mini Panel with graphic
|
||||
|
|
|
|||
|
|
@ -274,7 +274,7 @@
|
|||
* in X2. Dual endstop offsets can be set at runtime with 'M666 X<offset> Y<offset> Z<offset>'.
|
||||
*/
|
||||
|
||||
//#define X_DUAL_STEPPER_DRIVERS
|
||||
#define X_DUAL_STEPPER_DRIVERS
|
||||
#if ENABLED(X_DUAL_STEPPER_DRIVERS)
|
||||
#define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions
|
||||
//#define X_DUAL_ENDSTOPS
|
||||
|
|
@ -284,7 +284,7 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
//#define Y_DUAL_STEPPER_DRIVERS
|
||||
#define Y_DUAL_STEPPER_DRIVERS
|
||||
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
|
||||
#define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions
|
||||
//#define Y_DUAL_ENDSTOPS
|
||||
|
|
@ -474,13 +474,13 @@
|
|||
//#define LCD_INFO_MENU
|
||||
|
||||
// Scroll a longer status message into view
|
||||
//#define STATUS_MESSAGE_SCROLLING
|
||||
#define STATUS_MESSAGE_SCROLLING
|
||||
|
||||
// On the Info Screen, display XY with one decimal place when possible
|
||||
//#define LCD_DECIMAL_SMALL_XY
|
||||
|
||||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
#define LCD_TIMEOUT_TO_STATUS 30000
|
||||
|
||||
/**
|
||||
* LED Control Menu
|
||||
|
|
@ -743,7 +743,7 @@
|
|||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
//#define G38_PROBE_TARGET
|
||||
#define G38_PROBE_TARGET
|
||||
#if ENABLED(G38_PROBE_TARGET)
|
||||
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
|
||||
#endif
|
||||
|
|
@ -1282,15 +1282,15 @@
|
|||
*
|
||||
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
|
||||
*/
|
||||
//#define SPINDLE_LASER_ENABLE
|
||||
#define SPINDLE_LASER_ENABLE
|
||||
#if ENABLED(SPINDLE_LASER_ENABLE)
|
||||
|
||||
#define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed
|
||||
#define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power
|
||||
#define SPINDLE_LASER_ENABLE_INVERT true // set to "true" if the on/off function is reversed
|
||||
#define SPINDLE_LASER_PWM false // set to true if your controller supports setting the speed/power
|
||||
#define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower
|
||||
#define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power
|
||||
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop
|
||||
#define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction
|
||||
#define SPINDLE_DIR_CHANGE false // set to true if your spindle controller supports changing spindle direction
|
||||
#define SPINDLE_INVERT_DIR false
|
||||
#define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,74 @@
|
|||
/**
|
||||
* Made with Marlin Bitmap Converter
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*
|
||||
* This bitmap from the file 'binary_kitchen_bw_border.png'
|
||||
*/
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 64
|
||||
#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ................................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ................................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ................................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ................................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ................................................................
|
||||
0x00,0x00,0x7F,0xE0,0x00,0x00,0x00,0x00, // .................##########.....................................
|
||||
0x00,0x01,0xFF,0xF8,0x00,0x00,0x00,0x00, // ...............##############...................................
|
||||
0x00,0x03,0xFF,0xFC,0x7F,0x80,0x00,0x00, // ..............################...########.......................
|
||||
0x00,0x07,0xFF,0xFE,0xFF,0xE0,0x00,0x00, // .............##################.###########.....................
|
||||
0x00,0x07,0xFF,0xFF,0x7F,0xF0,0x00,0x00, // .............###################.###########....................
|
||||
0x00,0x07,0xFF,0xFF,0xFF,0xF0,0x00,0x00, // .............###############################....................
|
||||
0x00,0x07,0xFF,0xFF,0xFF,0xF8,0x00,0x00, // .............################################...................
|
||||
0x00,0x07,0xFF,0xFF,0xFF,0xF8,0x00,0x00, // .............################################...................
|
||||
0x00,0x07,0xFF,0xFF,0xFF,0xF0,0x00,0x00, // .............###############################....................
|
||||
0x00,0x03,0xFF,0xFF,0xFF,0xF0,0x00,0x00, // ..............##############################....................
|
||||
0x00,0x01,0xFF,0xFF,0xFF,0xE0,0x00,0x00, // ...............############################.....................
|
||||
0x00,0x00,0x7F,0xFF,0xFF,0x80,0x00,0x00, // .................########################.......................
|
||||
0x00,0x00,0x03,0xFF,0xFE,0x00,0x00,0x00, // ......................#################.........................
|
||||
0x00,0x00,0x0F,0xFF,0xFF,0x00,0x00,0x00, // ....................####################........................
|
||||
0x00,0x00,0x0F,0xFF,0xFF,0x00,0x00,0x00, // ....................####################........................
|
||||
0x00,0x00,0x1F,0xFF,0xFF,0x80,0x00,0x00, // ...................######################.......................
|
||||
0x00,0x00,0x1F,0xFF,0xFF,0x80,0x00,0x00, // ...................######################.......................
|
||||
0x00,0x00,0x1F,0xFF,0xFF,0x80,0x00,0x00, // ...................######################.......................
|
||||
0x00,0x00,0x1F,0x8F,0x3F,0x80,0x00,0x00, // ...................######...####..#######.......................
|
||||
0x00,0x00,0x1F,0x8E,0x1F,0x80,0x00,0x00, // ...................######...###....######.......................
|
||||
0x00,0x00,0x1F,0x8C,0x0F,0x80,0x00,0x00, // ...................######...##......#####.......................
|
||||
0x00,0x00,0x1F,0x8C,0x0F,0x80,0x00,0x00, // ...................######...##......#####.......................
|
||||
0x00,0x00,0x1F,0x8C,0x0F,0x80,0x00,0x00, // ...................######...##......#####.......................
|
||||
0x00,0x00,0x1F,0x8C,0x0F,0x80,0x00,0x00, // ...................######...##......#####.......................
|
||||
0x00,0x00,0x1F,0x8C,0x0F,0x00,0x00,0x00, // ...................######...##......####........................
|
||||
0x00,0x00,0x1F,0x8C,0x0F,0x00,0x00,0x00, // ...................######...##......####........................
|
||||
0x00,0x00,0x1F,0x8E,0x1F,0x00,0x00,0x00, // ...................######...###....#####........................
|
||||
0x00,0x00,0x1F,0x9F,0x3F,0x00,0x00,0x00, // ...................######..#####..######........................
|
||||
0x1F,0x00,0x1F,0xFF,0xFF,0x00,0x00,0x08, // ...#####...........#####################....................#...
|
||||
0x11,0xC0,0x1F,0xFF,0xFF,0x00,0x01,0xA0, // ...#...###.........#####################...............##.#.....
|
||||
0x1E,0x78,0x00,0x00,0x00,0x00,0x0F,0xC0, // ...####..####.......................................######......
|
||||
0x3F,0xCE,0x00,0x00,0x00,0x00,0x3F,0x80, // ..########..###...................................#######.......
|
||||
0x19,0xF3,0xC0,0x00,0x00,0x00,0xFF,0x00, // ...##..#####..####..............................########........
|
||||
0x0F,0x7E,0x60,0x00,0x01,0x87,0xF8,0x00, // ....####.######..##....................##....########...........
|
||||
0x01,0xCF,0x98,0x00,0x03,0x9F,0xE0,0x00, // .......###..#####..##.................###..########.............
|
||||
0x00,0x73,0xF8,0x00,0x03,0xFF,0x80,0x00, // .........###..#######.................###########...............
|
||||
0x00,0x1E,0x78,0x00,0x0F,0xFC,0x00,0x00, // ...........####..####...............##########..................
|
||||
0x00,0x03,0xFF,0x00,0x3F,0xF0,0x00,0x00, // ..............##########..........##########....................
|
||||
0x00,0x00,0xF1,0xC0,0xFF,0xE0,0x00,0x00, // ................####...###......###########.....................
|
||||
0x00,0x00,0x00,0x73,0xFF,0xE0,0x00,0x00, // .........................###..#############.....................
|
||||
0x00,0x00,0x00,0x1F,0xFE,0xF0,0x00,0x00, // ...........................############.####....................
|
||||
0x00,0x00,0x00,0x3F,0xF8,0x20,0x00,0x00, // ..........................###########.....#.....................
|
||||
0x00,0x00,0x00,0xFF,0xF0,0x00,0x00,0x00, // ........................############............................
|
||||
0x00,0x00,0x07,0xFF,0x1C,0x00,0x00,0x00, // .....................###########...###..........................
|
||||
0x00,0x00,0x0F,0xF8,0x07,0x80,0x00,0x00, // ....................#########........####.......................
|
||||
0x00,0x02,0x8F,0xE0,0x00,0xE0,0x00,0x00, // ..............#.#...#######.............###.....................
|
||||
0x00,0x04,0x5F,0x80,0x00,0x3C,0x00,0x00, // .............#...#.######.................####..................
|
||||
0x00,0x04,0x64,0x00,0x00,0x07,0xC0,0x00, // .............#...##..#.......................#####..............
|
||||
0x00,0x07,0x40,0x00,0x00,0x01,0xE0,0x00, // .............###.#.............................####.............
|
||||
0x00,0x00,0x80,0x00,0x00,0x00,0xE0,0x00, // ................#...............................###.............
|
||||
0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00, // ..............#.................................................
|
||||
0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00, // ...........##...................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ................................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ................................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ................................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ................................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ................................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ................................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 // ................................................................
|
||||
};
|
||||
|
|
@ -53,6 +53,52 @@
|
|||
|
||||
#include "pins_RAMPS.h"
|
||||
|
||||
//
|
||||
// TBA
|
||||
// Define global dummy pin
|
||||
//
|
||||
#define DUMMY_PIN 5
|
||||
|
||||
//
|
||||
// TBA
|
||||
// Set E0 to dummy port, set E1 to E0 and E2 to E1
|
||||
// This is used to mirror X and Y axes
|
||||
//
|
||||
#undef E0_STEP_PIN
|
||||
#undef E0_DIR_PIN
|
||||
#undef E0_ENABLE_PIN
|
||||
#undef E0_CS_PIN
|
||||
|
||||
#undef E1_STEP_PIN
|
||||
#undef E1_DIR_PIN
|
||||
#undef E1_ENABLE_PIN
|
||||
#undef E1_CS_PIN
|
||||
|
||||
#define E0_STEP_PIN DUMMY_PIN
|
||||
#define E0_DIR_PIN DUMMY_PIN
|
||||
#define E0_ENABLE_PIN DUMMY_PIN
|
||||
#define E0_CS_PIN DUMMY_PIN
|
||||
|
||||
#define E1_STEP_PIN 26
|
||||
#define E1_DIR_PIN 28
|
||||
#define E1_ENABLE_PIN 24
|
||||
#define E1_CS_PIN 42
|
||||
|
||||
#define E2_STEP_PIN 36
|
||||
#define E2_DIR_PIN 34
|
||||
#define E2_ENABLE_PIN 30
|
||||
#define E2_CS_PIN 44
|
||||
|
||||
//
|
||||
// TBA
|
||||
// Set Spindle pin to E0 (tuned on with M03)
|
||||
//
|
||||
#undef HEATER_0_PIN
|
||||
#define HEATER_0_PIN DUMMY_PIN
|
||||
|
||||
#undef SPINDLE_LASER_ENABLE_PIN
|
||||
#define SPINDLE_LASER_ENABLE_PIN 10
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
|
|
|
|||
Loading…
Reference in New Issue