From 27b2e2e786926099eb1d49db9f72b044b23760ab Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 17 Apr 2016 23:13:07 -0700 Subject: [PATCH] Document some variables --- Marlin/Marlin_main.cpp | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index ba352eee3..1f4863d1f 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -284,7 +284,11 @@ bool volumetric_enabled = false; float filament_size[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(DEFAULT_NOMINAL_FILAMENT_DIA); float volumetric_multiplier[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(1.0); +// The distance that XYZ has been offset by G92. Reset by G28. float position_shift[3] = { 0 }; + +// This offset is added to the configured home position. +// Set by M206, M428, or menu item. Saved to EEPROM. float home_offset[3] = { 0 }; // Software Endstops. Default to configured limits. @@ -295,23 +299,36 @@ float sw_endstop_max[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS }; int fanSpeeds[FAN_COUNT] = { 0 }; #endif +// The active extruder (tool). Set with T command. uint8_t active_extruder = 0; + +// Relative Mode. Enable with G91, disable with G90. +static bool relative_mode = false; + bool cancel_heatup = false; const char errormagic[] PROGMEM = "Error:"; const char echomagic[] PROGMEM = "echo:"; const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'}; -static bool relative_mode = false; //Determines Absolute or Relative Coordinates static int serial_count = 0; -static char* seen_pointer; ///< A pointer to find chars in the command string (X, Y, Z, E, etc.) -const char* queued_commands_P = NULL; /* pointer to the current line in the active sequence of commands, or NULL when none */ + +// GCode parameter pointer used by code_seen(), code_value(), etc. +static char* seen_pointer; + +// Next Immediate GCode Command pointer. NULL if none. +const char* queued_commands_P = NULL; + const int sensitive_pins[] = SENSITIVE_PINS; ///< Sensitive pin list for M42 + // Inactivity shutdown millis_t previous_cmd_ms = 0; static millis_t max_inactive_time = 0; static millis_t stepper_inactive_time = (DEFAULT_STEPPER_DEACTIVE_TIME) * 1000UL; + +// Print Job Timer Stopwatch print_job_timer = Stopwatch(); + static uint8_t target_extruder; #if ENABLED(AUTO_BED_LEVELING_FEATURE)