Update for translations language_pl.h

This commit is contained in:
android444 2016-12-14 17:32:33 +01:00 committed by GitHub
parent 7ca4f16a5c
commit 3363d2c937

View File

@ -53,12 +53,12 @@
#define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero")
#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA")
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" All")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" wsz.")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stol PLA")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA")
#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS")
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" All")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" wsz.")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stol ABS")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS")
#define MSG_COOLDOWN _UxGT("Chlodzenie")
@ -116,7 +116,7 @@
#define MSG_MOTION _UxGT("Ruch")
#define MSG_VOLUMETRIC _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E w mm3")
#define MSG_FILAMENT_DIAM _UxGT("Śr. fil.")
#define MSG_FILAMENT_DIAM _UxGT("Sr. fil.")
#define MSG_CONTRAST _UxGT("Kontrast LCD")
#define MSG_STORE_EPROM _UxGT("Zapisz w pamieci")
#define MSG_LOAD_EPROM _UxGT("Wczytaj z pamieci")
@ -128,7 +128,7 @@
#define MSG_PAUSE_PRINT _UxGT("Pauza")
#define MSG_RESUME_PRINT _UxGT("Wznowienie")
#define MSG_STOP_PRINT _UxGT("Stop")
#define MSG_CARD_MENU _UxGT("Menu karty SD")
#define MSG_CARD_MENU _UxGT("Karta SD")
#define MSG_NO_CARD _UxGT("Brak karty")
#define MSG_DWELL _UxGT("Uspij...")
#define MSG_USERWAIT _UxGT("Oczekiwanie...")
@ -179,7 +179,7 @@
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibruj X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibruj Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibruj Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibruj środek")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibruj srodek")
#define MSG_INFO_MENU _UxGT("O drukarce")
#define MSG_INFO_PRINTER_MENU _UxGT("Info drukarki")
@ -187,14 +187,14 @@
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistory")
#define MSG_INFO_EXTRUDERS _UxGT("Ekstrudery")
#define MSG_INFO_BAUDRATE _UxGT("Prędkosc USB")
#define MSG_INFO_BAUDRATE _UxGT("Predkosc USB")
#define MSG_INFO_PROTOCOL _UxGT("Protokol")
#define MSG_LIGHTS_ON _UxGT("Oswietlenie wl.")
#define MSG_LIGHTS_OFF _UxGT("Oswietlenie wyl.")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Wydrukowano")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukończono")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Ukonczono")
#define MSG_INFO_PRINT_TIME _UxGT("Czas druku")
#define MSG_INFO_PRINT_LONGEST _UxGT("Najdl. druk")
#define MSG_INFO_PRINT_FILAMENT _UxGT("Uzyty fil.")
@ -210,8 +210,8 @@
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("Zasilacz")
#define MSG_DRIVE_STRENGTH _UxGT("Siła silnika")
#define MSG_DAC_PERCENT _UxGT("Siła %")
#define MSG_DRIVE_STRENGTH _UxGT("Sila silnika")
#define MSG_DAC_PERCENT _UxGT("Sila %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ZMIEN FILAMENT")