Merge github.com:ErikZalm/Marlin into Marlin_v1

Conflicts:
	Marlin/language.h
This commit is contained in:
Guillaume Seguin 2013-07-23 21:46:41 +02:00
commit 34da3a0a3f
14 changed files with 622 additions and 226 deletions

View File

@ -37,6 +37,7 @@
// 63 = Melzi // 63 = Melzi
// 64 = STB V1.1 // 64 = STB V1.1
// 65 = Azteeg X1 // 65 = Azteeg X1
// 66 = Melzi with ATmega1284 (MaKr3d version)
// 7 = Ultimaker // 7 = Ultimaker
// 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare) // 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare)
// 77 = 3Drag Controller // 77 = 3Drag Controller
@ -126,6 +127,7 @@
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) // 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) // 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
// 10 is 100k RS thermistor 198-961 (4.7k pullup) // 10 is 100k RS thermistor 198-961 (4.7k pullup)
// 60 is 100k Maker's Tool Works Kapton Bed Thermister
// //
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k // 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
// (but gives greater accuracy and more stable PID) // (but gives greater accuracy and more stable PID)
@ -258,11 +260,11 @@
#ifndef ENDSTOPPULLUPS #ifndef ENDSTOPPULLUPS
// fine Enstop settings: Individual Pullups. will be ignored if ENDSTOPPULLUPS is defined // fine Enstop settings: Individual Pullups. will be ignored if ENDSTOPPULLUPS is defined
#define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
#define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX
#define ENDSTOPPULLUP_ZMAX // #define ENDSTOPPULLUP_ZMAX
#define ENDSTOPPULLUP_XMIN // #define ENDSTOPPULLUP_XMIN
#define ENDSTOPPULLUP_YMIN // #define ENDSTOPPULLUP_YMIN
// #define ENDSTOPPULLUP_ZMIN // #define ENDSTOPPULLUP_ZMIN
#endif #endif
@ -394,6 +396,10 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
//#define ULTIMAKERCONTROLLER //as available from the ultimaker online store. //#define ULTIMAKERCONTROLLER //as available from the ultimaker online store.
//#define ULTIPANEL //the ultipanel as on thingiverse //#define ULTIPANEL //the ultipanel as on thingiverse
// The MaKr3d Makr-Panel with graphic controller and SD support
// http://reprap.org/wiki/MaKr3d_MaKrPanel
//#define MAKRPANEL
// The RepRapDiscount Smart Controller (white PCB) // The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
//#define REPRAP_DISCOUNT_SMART_CONTROLLER //#define REPRAP_DISCOUNT_SMART_CONTROLLER
@ -419,6 +425,14 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
//#define RA_CONTROL_PANEL //#define RA_CONTROL_PANEL
//automatic expansion //automatic expansion
#if defined (MAKRPANEL)
#define DOGLCD
#define SDSUPPORT
#define ULTIPANEL
#define NEWPANEL
#define DEFAULT_LCD_CONTRAST 17
#endif
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD #define DOGLCD
#define U8GLIB_ST7920 #define U8GLIB_ST7920
@ -505,6 +519,13 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
#endif #endif
#endif #endif
// default LCD contrast for dogm-like LCD displays
#ifdef DOGLCD
# ifndef DEFAULT_LCD_CONTRAST
# define DEFAULT_LCD_CONTRAST 32
# endif
#endif
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
//#define FAST_PWM_FAN //#define FAST_PWM_FAN

View File

@ -37,7 +37,7 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size)
// the default values are used whenever there is a change to the data, to prevent // the default values are used whenever there is a change to the data, to prevent
// wrong data being written to the variables. // wrong data being written to the variables.
// ALSO: always make sure the variables in the Store and retrieve sections are in the same order. // ALSO: always make sure the variables in the Store and retrieve sections are in the same order.
#define EEPROM_VERSION "V07" #define EEPROM_VERSION "V08"
#ifdef EEPROM_SETTINGS #ifdef EEPROM_SETTINGS
void Config_StoreSettings() void Config_StoreSettings()
@ -78,6 +78,10 @@ void Config_StoreSettings()
EEPROM_WRITE_VAR(i,dummy); EEPROM_WRITE_VAR(i,dummy);
EEPROM_WRITE_VAR(i,dummy); EEPROM_WRITE_VAR(i,dummy);
#endif #endif
#ifndef DOGLCD
int lcd_contrast = 32;
#endif
EEPROM_WRITE_VAR(i,lcd_contrast);
char ver2[4]=EEPROM_VERSION; char ver2[4]=EEPROM_VERSION;
i=EEPROM_OFFSET; i=EEPROM_OFFSET;
EEPROM_WRITE_VAR(i,ver2); // validate data EEPROM_WRITE_VAR(i,ver2); // validate data
@ -198,6 +202,10 @@ void Config_RetrieveSettings()
EEPROM_READ_VAR(i,Kp); EEPROM_READ_VAR(i,Kp);
EEPROM_READ_VAR(i,Ki); EEPROM_READ_VAR(i,Ki);
EEPROM_READ_VAR(i,Kd); EEPROM_READ_VAR(i,Kd);
#ifndef DOGLCD
int lcd_contrast;
#endif
EEPROM_READ_VAR(i,lcd_contrast);
// Call updatePID (similar to when we have processed M301) // Call updatePID (similar to when we have processed M301)
updatePID(); updatePID();
@ -244,6 +252,9 @@ void Config_ResetDefault()
absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP; absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP;
absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED; absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
#endif #endif
#ifdef DOGLCD
lcd_contrast = DEFAULT_LCD_CONTRAST;
#endif
#ifdef PIDTEMP #ifdef PIDTEMP
Kp = DEFAULT_Kp; Kp = DEFAULT_Kp;
Ki = scalePID_i(DEFAULT_Ki); Ki = scalePID_i(DEFAULT_Ki);

View File

@ -18,12 +18,6 @@
//#define WATCH_TEMP_PERIOD 40000 //40 seconds //#define WATCH_TEMP_PERIOD 40000 //40 seconds
//#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds //#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds
// Wait for Cooldown
// This defines if the M109 call should not block if it is cooling down.
// example: From a current temp of 220, you set M109 S200.
// if CooldownNoWait is defined M109 will not wait for the cooldown to finish
#define CooldownNoWait true
#ifdef PIDTEMP #ifdef PIDTEMP
// this adds an experimental additional term to the heatingpower, proportional to the extrusion speed. // this adds an experimental additional term to the heatingpower, proportional to the extrusion speed.
// if Kc is choosen well, the additional required power due to increased melting should be compensated. // if Kc is choosen well, the additional required power due to increased melting should be compensated.
@ -152,6 +146,31 @@
#define EXTRUDERS 1 #define EXTRUDERS 1
#endif #endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which
// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage
// allowing faster printing speeds.
//#define DUAL_X_CARRIAGE
#ifdef DUAL_X_CARRIAGE
// Configuration for second X-carriage
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
// the second x-carriage always homes to the maximum endstop.
#define X2_MIN_POS 88 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
#define X2_MAX_POS 350.45 // set maximum to the distance between toolheads when both heads are homed
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
// without modifying the firmware (through the "M218 T1 X???" command).
// Remember: you should set the second extruder x-offset to 0 in your slicer.
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
#define X2_ENABLE_PIN 29
#define X2_STEP_PIN 25
#define X2_DIR_PIN 23
#endif // DUAL_X_CARRIAGE
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
#define X_HOME_RETRACT_MM 5 #define X_HOME_RETRACT_MM 5
#define Y_HOME_RETRACT_MM 5 #define Y_HOME_RETRACT_MM 5

View File

@ -114,6 +114,12 @@ MCU ?= atmega644p
else ifeq ($(HARDWARE_MOTHERBOARD),63) else ifeq ($(HARDWARE_MOTHERBOARD),63)
HARDWARE_VARIANT ?= Sanguino HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega644p MCU ?= atmega644p
else ifeq ($(HARDWARE_MOTHERBOARD),65)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
else ifeq ($(HARDWARE_MOTHERBOARD),66)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
#Ultimaker #Ultimaker
else ifeq ($(HARDWARE_MOTHERBOARD),7) else ifeq ($(HARDWARE_MOTHERBOARD),7)

View File

@ -96,7 +96,11 @@ void process_commands();
void manage_inactivity(); void manage_inactivity();
#if defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1 #if defined(DUAL_X_CARRIAGE) && defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1 \
&& defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1
#define enable_x() do { WRITE(X_ENABLE_PIN, X_ENABLE_ON); WRITE(X2_ENABLE_PIN, X_ENABLE_ON); } while (0)
#define disable_x() do { WRITE(X_ENABLE_PIN,!X_ENABLE_ON); WRITE(X2_ENABLE_PIN,!X_ENABLE_ON); } while (0)
#elif defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1
#define enable_x() WRITE(X_ENABLE_PIN, X_ENABLE_ON) #define enable_x() WRITE(X_ENABLE_PIN, X_ENABLE_ON)
#define disable_x() WRITE(X_ENABLE_PIN,!X_ENABLE_ON) #define disable_x() WRITE(X_ENABLE_PIN,!X_ENABLE_ON)
#else #else

View File

@ -67,17 +67,9 @@
// G91 - Use Relative Coordinates // G91 - Use Relative Coordinates
// G92 - Set current position to cordinates given // G92 - Set current position to cordinates given
//RepRap M Codes // M Codes
// M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled) // M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled)
// M1 - Same as M0 // M1 - Same as M0
// M104 - Set extruder target temp
// M105 - Read current temp
// M106 - Fan on
// M107 - Fan off
// M109 - Wait for extruder current temp to reach target temp.
// M114 - Display current position
//Custom M Codes
// M17 - Enable/Power all stepper motors // M17 - Enable/Power all stepper motors
// M18 - Disable all stepper motors; same as M84 // M18 - Disable all stepper motors; same as M84
// M20 - List SD card // M20 - List SD card
@ -92,6 +84,7 @@
// M29 - Stop SD write // M29 - Stop SD write
// M30 - Delete file from SD (M30 filename.g) // M30 - Delete file from SD (M30 filename.g)
// M31 - Output time since last M109 or SD card start to serial // M31 - Output time since last M109 or SD card start to serial
// M32 - Select file and start SD print (Can be used when printing from SD card)
// M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used. // M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used.
// M80 - Turn on Power Supply // M80 - Turn on Power Supply
// M81 - Turn off Power Supply // M81 - Turn off Power Supply
@ -101,6 +94,12 @@
// or use S<seconds> to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout. // or use S<seconds> to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout.
// M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default) // M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
// M92 - Set axis_steps_per_unit - same syntax as G92 // M92 - Set axis_steps_per_unit - same syntax as G92
// M104 - Set extruder target temp
// M105 - Read current temp
// M106 - Fan on
// M107 - Fan off
// M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating
// Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling
// M114 - Output current position to serial port // M114 - Output current position to serial port
// M115 - Capabilities string // M115 - Capabilities string
// M117 - display message // M117 - display message
@ -110,7 +109,8 @@
// M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil) // M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
// M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil) // M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
// M140 - Set bed target temp // M140 - Set bed target temp
// M190 - Wait for bed current temp to reach target temp. // M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating
// Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
// M200 - Set filament diameter // M200 - Set filament diameter
// M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) // M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
// M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!! // M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!!
@ -125,6 +125,7 @@
// M220 S<factor in percent>- set speed factor override percentage // M220 S<factor in percent>- set speed factor override percentage
// M221 S<factor in percent>- set extrude factor override percentage // M221 S<factor in percent>- set extrude factor override percentage
// M240 - Trigger a camera to take a photograph // M240 - Trigger a camera to take a photograph
// M250 - Set LCD contrast C<contrast value> (value 0..63)
// M280 - set servo position absolute. P: servo index, S: angle or microseconds // M280 - set servo position absolute. P: servo index, S: angle or microseconds
// M300 - Play beepsound S<frequency Hz> P<duration ms> // M300 - Play beepsound S<frequency Hz> P<duration ms>
// M301 - Set PID parameters P I and D // M301 - Set PID parameters P I and D
@ -245,6 +246,9 @@ bool Stopped=false;
Servo servos[NUM_SERVOS]; Servo servos[NUM_SERVOS];
#endif #endif
bool CooldownNoWait = true;
bool target_direction;
//=========================================================================== //===========================================================================
//=============================ROUTINES============================= //=============================ROUTINES=============================
//=========================================================================== //===========================================================================
@ -425,6 +429,7 @@ void setup()
servo_init(); servo_init();
lcd_init(); lcd_init();
_delay_ms(1000); // wait 1sec to display the splash screen
#if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1 #if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1
SET_OUTPUT(CONTROLLERFAN_PIN); //Set pin used for driver cooling fan SET_OUTPUT(CONTROLLERFAN_PIN); //Set pin used for driver cooling fan
@ -676,7 +681,44 @@ XYZ_CONSTS_FROM_CONFIG(float, max_length, MAX_LENGTH);
XYZ_CONSTS_FROM_CONFIG(float, home_retract_mm, HOME_RETRACT_MM); XYZ_CONSTS_FROM_CONFIG(float, home_retract_mm, HOME_RETRACT_MM);
XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR); XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR);
#ifdef DUAL_X_CARRIAGE
#if EXTRUDERS == 1 || defined(COREXY) \
|| !defined(X2_ENABLE_PIN) || !defined(X2_STEP_PIN) || !defined(X2_DIR_PIN) \
|| !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS) \
|| !defined(X_MAX_PIN) || X_MAX_PIN < 0
#error "Missing or invalid definitions for DUAL_X_CARRIAGE mode."
#endif
#if X_HOME_DIR != -1 || X2_HOME_DIR != 1
#error "Please use canonical x-carriage assignment" // the x-carriages are defined by their homing directions
#endif
static float x_home_pos(int extruder) {
if (extruder == 0)
return base_home_pos(X_AXIS) + add_homeing[X_AXIS];
else
// In dual carriage mode the extruder offset provides an override of the
// second X-carriage offset when homed - otherwise X2_HOME_POS is used.
// This allow soft recalibration of the second extruder offset position without firmware reflash
// (through the M218 command).
return (extruder_offset[X_AXIS][1] > 0) ? extruder_offset[X_AXIS][1] : X2_HOME_POS;
}
static int x_home_dir(int extruder) {
return (extruder == 0) ? X_HOME_DIR : X2_HOME_DIR;
}
static float inactive_x_carriage_pos = X2_MAX_POS;
#endif
static void axis_is_at_home(int axis) { static void axis_is_at_home(int axis) {
#ifdef DUAL_X_CARRIAGE
if (axis == X_AXIS && active_extruder != 0) {
current_position[X_AXIS] = x_home_pos(active_extruder);
min_pos[X_AXIS] = X2_MIN_POS;
max_pos[X_AXIS] = max(extruder_offset[X_AXIS][1], X2_MAX_POS);
return;
}
#endif
current_position[axis] = base_home_pos(axis) + add_homeing[axis]; current_position[axis] = base_home_pos(axis) + add_homeing[axis];
min_pos[axis] = base_min_pos(axis) + add_homeing[axis]; min_pos[axis] = base_min_pos(axis) + add_homeing[axis];
max_pos[axis] = base_max_pos(axis) + add_homeing[axis]; max_pos[axis] = base_max_pos(axis) + add_homeing[axis];
@ -685,30 +727,38 @@ static void axis_is_at_home(int axis) {
static void homeaxis(int axis) { static void homeaxis(int axis) {
#define HOMEAXIS_DO(LETTER) \ #define HOMEAXIS_DO(LETTER) \
((LETTER##_MIN_PIN > -1 && LETTER##_HOME_DIR==-1) || (LETTER##_MAX_PIN > -1 && LETTER##_HOME_DIR==1)) ((LETTER##_MIN_PIN > -1 && LETTER##_HOME_DIR==-1) || (LETTER##_MAX_PIN > -1 && LETTER##_HOME_DIR==1))
if (axis==X_AXIS ? HOMEAXIS_DO(X) : if (axis==X_AXIS ? HOMEAXIS_DO(X) :
axis==Y_AXIS ? HOMEAXIS_DO(Y) : axis==Y_AXIS ? HOMEAXIS_DO(Y) :
axis==Z_AXIS ? HOMEAXIS_DO(Z) : axis==Z_AXIS ? HOMEAXIS_DO(Z) :
0) { 0) {
int axis_home_dir = home_dir(axis);
#ifdef DUAL_X_CARRIAGE
if (axis == X_AXIS)
axis_home_dir = x_home_dir(active_extruder);
#endif
// Engage Servo endstop if enabled // Engage Servo endstop if enabled
#ifdef SERVO_ENDSTOPS[axis] > -1 #ifdef SERVO_ENDSTOPS
if (SERVO_ENDSTOPS[axis] > -1) {
servos[servo_endstops[axis]].write(servo_endstop_angles[axis * 2]); servos[servo_endstops[axis]].write(servo_endstop_angles[axis * 2]);
}
#endif #endif
current_position[axis] = 0; current_position[axis] = 0;
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
destination[axis] = 1.5 * max_length(axis) * home_dir(axis); destination[axis] = 1.5 * max_length(axis) * axis_home_dir;
feedrate = homing_feedrate[axis]; feedrate = homing_feedrate[axis];
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
st_synchronize(); st_synchronize();
current_position[axis] = 0; current_position[axis] = 0;
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
destination[axis] = -home_retract_mm(axis) * home_dir(axis); destination[axis] = -home_retract_mm(axis) * axis_home_dir;
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
st_synchronize(); st_synchronize();
destination[axis] = 2*home_retract_mm(axis) * home_dir(axis); destination[axis] = 2*home_retract_mm(axis) * axis_home_dir;
feedrate = homing_feedrate[axis]/2 ; feedrate = homing_feedrate[axis]/2 ;
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
st_synchronize(); st_synchronize();
@ -719,8 +769,10 @@ static void homeaxis(int axis) {
endstops_hit_on_purpose(); endstops_hit_on_purpose();
// Retract Servo endstop if enabled // Retract Servo endstop if enabled
#ifdef SERVO_ENDSTOPS[axis] > -1 #ifdef SERVO_ENDSTOPS
if (SERVO_ENDSTOPS[axis] > -1) {
servos[servo_endstops[axis]].write(servo_endstop_angles[axis * 2 + 1]); servos[servo_endstops[axis]].write(servo_endstop_angles[axis * 2 + 1]);
}
#endif #endif
} }
} }
@ -859,8 +911,14 @@ void process_commands()
{ {
current_position[X_AXIS] = 0;current_position[Y_AXIS] = 0; current_position[X_AXIS] = 0;current_position[Y_AXIS] = 0;
#ifndef DUAL_X_CARRIAGE
int x_axis_home_dir = home_dir(X_AXIS);
#else
int x_axis_home_dir = x_home_dir(active_extruder);
#endif
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
destination[X_AXIS] = 1.5 * X_MAX_LENGTH * X_HOME_DIR;destination[Y_AXIS] = 1.5 * Y_MAX_LENGTH * Y_HOME_DIR; destination[X_AXIS] = 1.5 * max_length(X_AXIS) * x_axis_home_dir;destination[Y_AXIS] = 1.5 * max_length(Y_AXIS) * home_dir(Y_AXIS);
feedrate = homing_feedrate[X_AXIS]; feedrate = homing_feedrate[X_AXIS];
if(homing_feedrate[Y_AXIS]<feedrate) if(homing_feedrate[Y_AXIS]<feedrate)
feedrate =homing_feedrate[Y_AXIS]; feedrate =homing_feedrate[Y_AXIS];
@ -885,6 +943,13 @@ void process_commands()
if((home_all_axis) || (code_seen(axis_codes[X_AXIS]))) if((home_all_axis) || (code_seen(axis_codes[X_AXIS])))
{ {
#ifdef DUAL_X_CARRIAGE
int tmp_extruder = active_extruder;
active_extruder = !active_extruder;
HOMEAXIS(X);
inactive_x_carriage_pos = current_position[X_AXIS];
active_extruder = tmp_extruder;
#endif
HOMEAXIS(X); HOMEAXIS(X);
} }
@ -917,7 +982,7 @@ void process_commands()
} }
} }
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
#endif // DELTA #endif // else DELTA
#ifdef ENDSTOPS_ONLY_FOR_HOMING #ifdef ENDSTOPS_ONLY_FOR_HOMING
enable_endstops(false); enable_endstops(false);
@ -1057,6 +1122,19 @@ void process_commands()
card.removeFile(strchr_pointer + 4); card.removeFile(strchr_pointer + 4);
} }
break; break;
case 32: //M32 - Select file and start SD print
if(card.sdprinting) {
st_synchronize();
card.closefile();
card.sdprinting = false;
}
starpos = (strchr(strchr_pointer + 4,'*'));
if(starpos!=NULL)
*(starpos-1)='\0';
card.openFile(strchr_pointer + 4,true);
card.startFileprint();
starttime=millis();
break;
case 928: //M928 - Start SD write case 928: //M928 - Start SD write
starpos = (strchr(strchr_pointer + 5,'*')); starpos = (strchr(strchr_pointer + 5,'*'));
if(starpos != NULL){ if(starpos != NULL){
@ -1159,7 +1237,13 @@ void process_commands()
#ifdef AUTOTEMP #ifdef AUTOTEMP
autotemp_enabled=false; autotemp_enabled=false;
#endif #endif
if (code_seen('S')) setTargetHotend(code_value(), tmp_extruder); if (code_seen('S')) {
setTargetHotend(code_value(), tmp_extruder);
CooldownNoWait = true;
} else if (code_seen('R')) {
setTargetHotend(code_value(), tmp_extruder);
CooldownNoWait = false;
}
#ifdef AUTOTEMP #ifdef AUTOTEMP
if (code_seen('S')) autotemp_min=code_value(); if (code_seen('S')) autotemp_min=code_value();
if (code_seen('B')) autotemp_max=code_value(); if (code_seen('B')) autotemp_max=code_value();
@ -1174,7 +1258,7 @@ void process_commands()
codenum = millis(); codenum = millis();
/* See if we are heating up or cooling down */ /* See if we are heating up or cooling down */
bool target_direction = isHeatingHotend(tmp_extruder); // true if heating, false if cooling target_direction = isHeatingHotend(tmp_extruder); // true if heating, false if cooling
#ifdef TEMP_RESIDENCY_TIME #ifdef TEMP_RESIDENCY_TIME
long residencyStart; long residencyStart;
@ -1230,9 +1314,18 @@ void process_commands()
case 190: // M190 - Wait for bed heater to reach target. case 190: // M190 - Wait for bed heater to reach target.
#if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1 #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
LCD_MESSAGEPGM(MSG_BED_HEATING); LCD_MESSAGEPGM(MSG_BED_HEATING);
if (code_seen('S')) setTargetBed(code_value()); if (code_seen('S')) {
setTargetBed(code_value());
CooldownNoWait = true;
} else if (code_seen('R')) {
setTargetBed(code_value());
CooldownNoWait = false;
}
codenum = millis(); codenum = millis();
while(isHeatingBed())
target_direction = isHeatingBed(); // true if heating, false if cooling
while ( target_direction ? (isHeatingBed()) : (isCoolingBed()&&(CooldownNoWait==false)) )
{ {
if(( millis() - codenum) > 1000 ) //Print Temp Reading every 1 second while heating up. if(( millis() - codenum) > 1000 ) //Print Temp Reading every 1 second while heating up.
{ {
@ -1716,6 +1809,18 @@ void process_commands()
#endif #endif
} }
break; break;
#ifdef DOGLCD
case 250: // M250 Set LCD contrast value: C<value> (value 0..63)
{
if (code_seen('C')) {
lcd_setcontrast( ((int)code_value())&63 );
}
SERIAL_PROTOCOLPGM("lcd contrast value: ");
SERIAL_PROTOCOL(lcd_contrast);
SERIAL_PROTOCOLLN("");
}
break;
#endif
#ifdef PREVENT_DANGEROUS_EXTRUDE #ifdef PREVENT_DANGEROUS_EXTRUDE
case 302: // allow cold extrudes, or set the minimum extrude temperature case 302: // allow cold extrudes, or set the minimum extrude temperature
{ {
@ -1973,6 +2078,20 @@ void process_commands()
if(tmp_extruder != active_extruder) { if(tmp_extruder != active_extruder) {
// Save current position to return to after applying extruder offset // Save current position to return to after applying extruder offset
memcpy(destination, current_position, sizeof(destination)); memcpy(destination, current_position, sizeof(destination));
#ifdef DUAL_X_CARRIAGE
// only apply Y extruder offset in dual x carriage mode (x offset is already used in determining home pos)
current_position[Y_AXIS] = current_position[Y_AXIS] -
extruder_offset[Y_AXIS][active_extruder] +
extruder_offset[Y_AXIS][tmp_extruder];
float tmp_x_pos = current_position[X_AXIS];
// Set the new active extruder and position
active_extruder = tmp_extruder;
axis_is_at_home(X_AXIS); //this function updates X min/max values.
current_position[X_AXIS] = inactive_x_carriage_pos;
inactive_x_carriage_pos = tmp_x_pos;
#else
// Offset extruder (only by XY) // Offset extruder (only by XY)
int i; int i;
for(i = 0; i < 2; i++) { for(i = 0; i < 2; i++) {
@ -1982,6 +2101,7 @@ void process_commands()
} }
// Set the new active extruder and position // Set the new active extruder and position
active_extruder = tmp_extruder; active_extruder = tmp_extruder;
#endif //else DUAL_X_CARRIAGE
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
// Move to the old position if 'F' was in the parameters // Move to the old position if 'F' was in the parameters
if(make_move && Stopped == false) { if(make_move && Stopped == false) {
@ -2226,6 +2346,9 @@ void controllerFan()
|| !READ(E2_ENABLE_PIN) || !READ(E2_ENABLE_PIN)
#endif #endif
#if EXTRUDER > 1 #if EXTRUDER > 1
#if defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1
|| !READ(X2_ENABLE_PIN)
#endif
|| !READ(E1_ENABLE_PIN) || !READ(E1_ENABLE_PIN)
#endif #endif
|| !READ(E0_ENABLE_PIN)) //If any of the drivers are enabled... || !READ(E0_ENABLE_PIN)) //If any of the drivers are enabled...

View File

@ -206,7 +206,6 @@ void CardReader::startFileprint()
if(cardOK) if(cardOK)
{ {
sdprinting = true; sdprinting = true;
} }
} }

View File

@ -74,16 +74,28 @@
#define FONT_STATUSMENU u8g_font_6x9 #define FONT_STATUSMENU u8g_font_6x9
int lcd_contrast;
// LCD selection // LCD selection
#ifdef U8GLIB_ST7920 #ifdef U8GLIB_ST7920
//U8GLIB_ST7920_128X64_RRD u8g(0,0,0); //U8GLIB_ST7920_128X64_RRD u8g(0,0,0);
U8GLIB_ST7920_128X64_RRD u8g(0); U8GLIB_ST7920_128X64_RRD u8g(0);
#elif defined(MAKRPANEL)
// The MaKrPanel display, ST7565 controller as well
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
#else #else
// for regular DOGM128 display with HW-SPI
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0 U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
#endif #endif
static void lcd_implementation_init() static void lcd_implementation_init()
{ {
#ifdef LCD_PIN_BL
pinMode(LCD_PIN_BL, OUTPUT); // Enable LCD backlight
digitalWrite(LCD_PIN_BL, HIGH);
#endif
u8g.setContrast(lcd_contrast);
// Uncomment this if you have the first generation (V1.10) of STBs board // Uncomment this if you have the first generation (V1.10) of STBs board
// pinMode(17, OUTPUT); // Enable LCD backlight // pinMode(17, OUTPUT); // Enable LCD backlight
// digitalWrite(17, HIGH); // digitalWrite(17, HIGH);
@ -117,14 +129,14 @@ static void lcd_implementation_init()
u8g.setFont(u8g_font_6x10_marlin); u8g.setFont(u8g_font_6x10_marlin);
u8g.drawStr(62,10,"MARLIN"); u8g.drawStr(62,10,"MARLIN");
u8g.setFont(u8g_font_5x8); u8g.setFont(u8g_font_5x8);
u8g.drawStr(62,19,"V1.0.0 RC2"); u8g.drawStr(62,19,"V1.0.0 RC2-mm");
u8g.setFont(u8g_font_6x10_marlin); u8g.setFont(u8g_font_6x10_marlin);
u8g.drawStr(62,28,"by ErikZalm"); u8g.drawStr(62,28,"by ErikZalm");
u8g.drawStr(62,41,"DOGM128 LCD"); u8g.drawStr(62,41,"DOGM128 LCD");
u8g.setFont(u8g_font_5x8); u8g.setFont(u8g_font_5x8);
u8g.drawStr(62,48,"enhancements"); u8g.drawStr(62,48,"enhancements");
u8g.setFont(u8g_font_5x8); u8g.setFont(u8g_font_5x8);
u8g.drawStr(62,55,"by STB"); u8g.drawStr(62,55,"by STB, MM");
u8g.drawStr(62,61,"uses u"); u8g.drawStr(62,61,"uses u");
u8g.drawStr90(92,57,"8"); u8g.drawStr90(92,57,"8");
u8g.drawStr(100,61,"glib"); u8g.drawStr(100,61,"glib");

View File

@ -103,6 +103,7 @@
#define MSG_RECTRACT "Rectract" #define MSG_RECTRACT "Rectract"
#define MSG_TEMPERATURE "Temperature" #define MSG_TEMPERATURE "Temperature"
#define MSG_MOTION "Motion" #define MSG_MOTION "Motion"
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Store memory" #define MSG_STORE_EPROM "Store memory"
#define MSG_LOAD_EPROM "Load memory" #define MSG_LOAD_EPROM "Load memory"
#define MSG_RESTORE_FAILSAFE "Restore Failsafe" #define MSG_RESTORE_FAILSAFE "Restore Failsafe"
@ -264,6 +265,7 @@
#define MSG_RECTRACT "Wycofanie" #define MSG_RECTRACT "Wycofanie"
#define MSG_TEMPERATURE "Temperatura" #define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Ruch" #define MSG_MOTION "Ruch"
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Zapisz w pamieci" #define MSG_STORE_EPROM "Zapisz w pamieci"
#define MSG_LOAD_EPROM "Wczytaj z pamieci" #define MSG_LOAD_EPROM "Wczytaj z pamieci"
#define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne" #define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne"
@ -429,6 +431,7 @@
#define MSG_TEMPERATURE_WIDE " Temperature \x7E" #define MSG_TEMPERATURE_WIDE " Temperature \x7E"
#define MSG_TEMPERATURE_RTN " Temperature \003" #define MSG_TEMPERATURE_RTN " Temperature \003"
#define MSG_MOTION_WIDE " Mouvement \x7E" #define MSG_MOTION_WIDE " Mouvement \x7E"
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM " Sauvegarder memoire" #define MSG_STORE_EPROM " Sauvegarder memoire"
#define MSG_LOAD_EPROM " Lire memoire" #define MSG_LOAD_EPROM " Lire memoire"
#define MSG_RESTORE_FAILSAFE " Restaurer memoire" #define MSG_RESTORE_FAILSAFE " Restaurer memoire"
@ -541,7 +544,7 @@
#define MSG_SD_INSERTED "SDKarte erkannt" #define MSG_SD_INSERTED "SDKarte erkannt"
#define MSG_SD_REMOVED "SDKarte entfernt" #define MSG_SD_REMOVED "SDKarte entfernt"
#define MSG_MAIN "Hauptmneü" #define MSG_MAIN "Hauptmenü"
#define MSG_AUTOSTART "Autostart" #define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Stepper abschalten" #define MSG_DISABLE_STEPPERS "Stepper abschalten"
#define MSG_AUTO_HOME "Auto Nullpunkt" #define MSG_AUTO_HOME "Auto Nullpunkt"
@ -562,7 +565,7 @@
#define MSG_NOZZLE2 "Düse3" #define MSG_NOZZLE2 "Düse3"
#define MSG_BED "Bett" #define MSG_BED "Bett"
#define MSG_FAN_SPEED "Lüftergeschw." #define MSG_FAN_SPEED "Lüftergeschw."
#define MSG_FLOW "Fluß" #define MSG_FLOW "Fluss"
#define MSG_CONTROL "Einstellungen" #define MSG_CONTROL "Einstellungen"
#define MSG_MIN "\002 Min" #define MSG_MIN "\002 Min"
#define MSG_MAX "\002 Max" #define MSG_MAX "\002 Max"
@ -595,6 +598,7 @@
#define MSG_WATCH "Beobachten" #define MSG_WATCH "Beobachten"
#define MSG_TEMPERATURE "Temperatur" #define MSG_TEMPERATURE "Temperatur"
#define MSG_MOTION "Bewegung" #define MSG_MOTION "Bewegung"
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "EPROM speichern" #define MSG_STORE_EPROM "EPROM speichern"
#define MSG_LOAD_EPROM "EPROM laden" #define MSG_LOAD_EPROM "EPROM laden"
#define MSG_RESTORE_FAILSAFE "Standardkonfig." #define MSG_RESTORE_FAILSAFE "Standardkonfig."
@ -703,90 +707,97 @@
#define WELCOME_MSG MACHINE_NAME "Lista." #define WELCOME_MSG MACHINE_NAME "Lista."
#define MSG_SD_INSERTED "Tarjeta SD Colocada" #define MSG_SD_INSERTED "Tarjeta SD Colocada"
#define MSG_SD_REMOVED "Tarjeta SD Retirada" #define MSG_SD_REMOVED "Tarjeta SD Retirada"
#define MSG_MAIN " Menu Principal \003" #define MSG_MAIN "Menu Principal"
#define MSG_AUTOSTART " Autostart" #define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS "Apagar Motores" #define MSG_DISABLE_STEPPERS "Apagar Motores"
#define MSG_AUTO_HOME " Llevar Ejes al Cero" #define MSG_AUTO_HOME "Llevar al Origen" // "Llevar Ejes al Cero"
#define MSG_SET_ORIGIN "Establecer Cero" #define MSG_SET_ORIGIN "Establecer Cero"
#define MSG_PREHEAT_PLA "Precalentar PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"
#define MSG_PREHEAT_ABS "Precalentar ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"
#define MSG_COOLDOWN "Enfriar" #define MSG_COOLDOWN "Enfriar"
#define MSG_SWITCH_PS_ON "Switch Power On" #define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SWITCH_PS_OFF "Switch Power Off" #define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_EXTRUDE "Extruir" #define MSG_EXTRUDE "Extruir"
#define MSG_RETRACT "Retraer" #define MSG_RETRACT "Retraer"
#define MSG_PREHEAT_PLA " Precalentar PLA" #define MSG_MOVE_AXIS "Mover Ejes"
#define MSG_PREHEAT_PLA_SETTINGS " Ajustar temp. PLA" #define MSG_SPEED "Velocidad"
#define MSG_PREHEAT_ABS " Precalentar ABS" #define MSG_NOZZLE "Nozzle"
#define MSG_PREHEAT_ABS_SETTINGS " Ajustar temp. ABS" #define MSG_NOZZLE1 "Nozzle2"
#define MSG_MOVE_AXIS " Mover Ejes \x7E" #define MSG_NOZZLE2 "Nozzle3"
#define MSG_SPEED " Velocidad:" #define MSG_BED "Base"
#define MSG_NOZZLE " \002Fusor:" #define MSG_FAN_SPEED "Ventilador"
#define MSG_NOZZLE1 " \002Fusor2:" #define MSG_FLOW "Flujo"
#define MSG_NOZZLE2 " \002Fusor3:" #define MSG_CONTROL "Control"
#define MSG_BED " \002Base:" #define MSG_MIN "\002 Min"
#define MSG_FAN_SPEED " Ventilador:" #define MSG_MAX "\002 Max"
#define MSG_FLOW " Flujo:" #define MSG_FACTOR "\002 Fact"
#define MSG_CONTROL " Control \003" #define MSG_AUTOTEMP "Autotemp"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
#define MSG_FACTOR " \002 Fact:"
#define MSG_AUTOTEMP " Autotemp:"
#define MSG_ON "On" #define MSG_ON "On"
#define MSG_OFF "Off" #define MSG_OFF "Off"
#define MSG_PID_P " PID-P: " #define MSG_PID_P "PID-P"
#define MSG_PID_I " PID-I: " #define MSG_PID_I "PID-I"
#define MSG_PID_D " PID-D: " #define MSG_PID_D "PID-D"
#define MSG_PID_C " PID-C: " #define MSG_PID_C "PID-C"
#define MSG_ACC " Acc:" #define MSG_ACC "Acel"
#define MSG_VXY_JERK " Vxy-agit: " #define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-agit" #define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-agit" #define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax" #define MSG_VMAX "Vmax"
#define MSG_X "x:" #define MSG_X "x"
#define MSG_Y "y:" #define MSG_Y "y"
#define MSG_Z "z:" #define MSG_Z "z"
#define MSG_E "e:" #define MSG_E "e"
#define MSG_VMIN " Vmin:" #define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN " VTrav min:" #define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax" #define MSG_AMAX "Amax"
#define MSG_A_RETRACT " A-retrac.:" #define MSG_A_RETRACT "A-retrac."
#define MSG_XSTEPS " Xpasos/mm:" #define MSG_XSTEPS "X pasos/mm"
#define MSG_YSTEPS " Ypasos/mm:" #define MSG_YSTEPS "Y pasos/mm"
#define MSG_ZSTEPS " Zpasos/mm:" #define MSG_ZSTEPS "Z pasos/mm"
#define MSG_ESTEPS " Epasos/mm:" #define MSG_ESTEPS "E pasos/mm"
#define MSG_MAIN_WIDE " Menu Principal \003" #define MSG_RECTRACT "Retraer"
#define MSG_RECTRACT_WIDE " Retraer \x7E" #define MSG_TEMPERATURE "Temperatura"
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E" #define MSG_MOTION "Movimiento"
#define MSG_TEMPERATURE_RTN " Temperatura \003"
#define MSG_MOTION_WIDE " Movimiento \x7E"
#define MSG_STORE_EPROM "Guardar Memoria" #define MSG_STORE_EPROM "Guardar Memoria"
#define MSG_LOAD_EPROM "Cargar Memoria" #define MSG_LOAD_EPROM "Cargar Memoria"
#define MSG_RESTORE_FAILSAFE "Rest. de emergencia" #define MSG_RESTORE_FAILSAFE "Rest. de emergencia"
#define MSG_REFRESH "\004Volver a cargar" #define MSG_REFRESH "Volver a cargar"
#define MSG_WATCH " Monitorizar \003" #define MSG_WATCH "Monitorizar"
#define MSG_PREPARE " Preparar \x7E" #define MSG_PREPARE "Preparar"
#define MSG_PREPARE_ALT " Preparar \003" #define MSG_TUNE "Ajustar"
#define MSG_CONTROL_ARROW " Control \x7E" #define MSG_PAUSE_PRINT "Pausar Impresion"
#define MSG_RETRACT_ARROW " Retraer \x7E" #define MSG_RESUME_PRINT "Reanudar Impresion"
#define MSG_TUNE " Ajustar \x7E" #define MSG_STOP_PRINT "Detener Impresion"
#define MSG_PAUSE_PRINT " Pausar Impresion \x7E" #define MSG_CARD_MENU "Menu de SD"
#define MSG_RESUME_PRINT " Reanudar Impresion \x7E"
#define MSG_STOP_PRINT " Detener Impresion \x7E"
#define MSG_CARD_MENU " Menu de SD \x7E"
#define MSG_NO_CARD "No hay Tarjeta SD" #define MSG_NO_CARD "No hay Tarjeta SD"
#define MSG_DWELL "Reposo..." #define MSG_DWELL "Reposo..."
#define MSG_USERWAIT "Esperando Ordenes..." #define MSG_USERWAIT "Esperando Ordenes..."
#define MSG_RESUMING "Resumiendo Impresion"
#define MSG_NO_MOVE "Sin movimiento" #define MSG_NO_MOVE "Sin movimiento"
#define MSG_PART_RELEASE "Desacople Parcial"
#define MSG_KILLED "PARADA DE EMERGENCIA. " #define MSG_KILLED "PARADA DE EMERGENCIA. "
#define MSG_STOPPED "PARADA." #define MSG_STOPPED "PARADA."
#define MSG_STEPPER_RELEASED "Desacoplada." #define MSG_CONTROL_RETRACT "Retraer mm"
#define MSG_CONTROL_RETRACT " Retraer mm:" #define MSG_CONTROL_RETRACTF "Retraer F"
#define MSG_CONTROL_RETRACTF " Retraer F:" #define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:" #define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:" #define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:" #define MSG_AUTORETRACT "AutoRetr."
#define MSG_AUTORETRACT " AutoRetr.:"
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Iniciando. Tarjeta-SD"
#define MSG_CNG_SDCARD "Cambiar Tarjeta-SD"
#define MSG_RECTRACT_WIDE "Retraer"
#define MSG_TEMPERATURE_WIDE "Temperatura"
#define MSG_TEMPERATURE_RTN "Temperatura"
#define MSG_MAIN_WIDE "Menu Principal"
#define MSG_MOTION_WIDE "Movimiento"
#define MSG_PREPARE_ALT "Preparar"
#define MSG_CONTROL_ARROW "Control"
#define MSG_RETRACT_ARROW "Retraer"
#define MSG_PART_RELEASE "Desacople Parcial"
#define MSG_STEPPER_RELEASED "Desacoplada."
// Serial Console Messages // Serial Console Messages
#define MSG_Enqueing "En cola \"" #define MSG_Enqueing "En cola \""
@ -831,11 +842,11 @@
#define MSG_Y_MIN "y_min: " #define MSG_Y_MIN "y_min: "
#define MSG_Y_MAX "y_max: " #define MSG_Y_MAX "y_max: "
#define MSG_Z_MIN "z_min: " #define MSG_Z_MIN "z_min: "
#define MSG_Z_MAX "z_max: "
#define MSG_M119_REPORT "Comprobando fines de carrera." #define MSG_M119_REPORT "Comprobando fines de carrera."
#define MSG_ENDSTOP_HIT "PULSADO" #define MSG_ENDSTOP_HIT "PULSADO"
#define MSG_ENDSTOP_OPEN "abierto" #define MSG_ENDSTOP_OPEN "abierto"
#define MSG_HOTEND_OFFSET "Despl. Hotend:" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." #define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" #define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" #define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
@ -918,6 +929,7 @@
#define MSG_RECTRACT " Откат подачи \x7E" #define MSG_RECTRACT " Откат подачи \x7E"
#define MSG_TEMPERATURE " Температура \x7E" #define MSG_TEMPERATURE " Температура \x7E"
#define MSG_MOTION " Скорости \x7E" #define MSG_MOTION " Скорости \x7E"
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM " Сохранить настройки" #define MSG_STORE_EPROM " Сохранить настройки"
#define MSG_LOAD_EPROM " Загрузить настройки" #define MSG_LOAD_EPROM " Загрузить настройки"
#define MSG_RESTORE_FAILSAFE " Сброс настроек " #define MSG_RESTORE_FAILSAFE " Сброс настроек "
@ -1075,6 +1087,7 @@
#define MSG_RECTRACT "Ritrai" #define MSG_RECTRACT "Ritrai"
#define MSG_TEMPERATURE "Temperatura" #define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento" #define MSG_MOTION "Movimento"
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Salva in EEPROM" #define MSG_STORE_EPROM "Salva in EEPROM"
#define MSG_LOAD_EPROM "Carica da EEPROM" #define MSG_LOAD_EPROM "Carica da EEPROM"
#define MSG_RESTORE_FAILSAFE "Impostaz. default" #define MSG_RESTORE_FAILSAFE "Impostaz. default"
@ -1409,6 +1422,7 @@
#define MSG_RECTRACT "Veda takaisin" #define MSG_RECTRACT "Veda takaisin"
#define MSG_TEMPERATURE "Lampotila" #define MSG_TEMPERATURE "Lampotila"
#define MSG_MOTION "Liike" #define MSG_MOTION "Liike"
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Tallenna muistiin" #define MSG_STORE_EPROM "Tallenna muistiin"
#define MSG_LOAD_EPROM "Lataa muistista" #define MSG_LOAD_EPROM "Lataa muistista"
#define MSG_RESTORE_FAILSAFE "Palauta oletus" #define MSG_RESTORE_FAILSAFE "Palauta oletus"

View File

@ -856,13 +856,13 @@
#if MOTHERBOARD == 64 #if MOTHERBOARD == 64
#define STB #define STB
#endif #endif
#if MOTHERBOARD == 63 #if MOTHERBOARD == 63 || MOTHERBOARD == 66
#define MELZI #define MELZI
#endif #endif
#if MOTHERBOARD == 65 #if MOTHERBOARD == 65
#define AZTEEG_X1 #define AZTEEG_X1
#endif #endif
#if MOTHERBOARD == 62 || MOTHERBOARD == 63 || MOTHERBOARD == 64 || MOTHERBOARD == 65 #if MOTHERBOARD == 62 || MOTHERBOARD == 63 || MOTHERBOARD == 64 || MOTHERBOARD == 65 || MOTHERBOARD == 66
#undef MOTHERBOARD #undef MOTHERBOARD
#define MOTHERBOARD 6 #define MOTHERBOARD 6
#define SANGUINOLOLU_V_1_2 #define SANGUINOLOLU_V_1_2
@ -904,6 +904,8 @@
#ifdef STB #ifdef STB
#define FAN_PIN 4 #define FAN_PIN 4
// Uncomment this if you have the first generation (V1.10) of STBs board
#define LCD_PIN_BL 17 // LCD backlight LED
#endif #endif
#ifdef AZTEEG_X1 #ifdef AZTEEG_X1
@ -988,6 +990,27 @@
#endif //Newpanel #endif //Newpanel
#endif //Ultipanel #endif //Ultipanel
#ifdef MAKRPANEL
#define BEEPER 29
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 30
#define DOGLCD_CS 17
#define LCD_PIN_BL 28 // backlight LED on PA3
// GLCD features
#define LCD_CONTRAST 1
// Uncomment screen orientation
#define LCD_SCREEN_ROT_0
// #define LCD_SCREEN_ROT_90
// #define LCD_SCREEN_ROT_180
// #define LCD_SCREEN_ROT_270
//The encoder and click button
#define BTN_EN1 11
#define BTN_EN2 10
#define BTN_ENC 16 //the click switch
//not connected to a pin
#define SDCARDDETECT -1
#endif //Makrpanel
#endif #endif

View File

@ -348,10 +348,20 @@ ISR(TIMER1_COMPA_vect)
// Set the direction bits (X_AXIS=A_AXIS and Y_AXIS=B_AXIS for COREXY) // Set the direction bits (X_AXIS=A_AXIS and Y_AXIS=B_AXIS for COREXY)
if((out_bits & (1<<X_AXIS))!=0){ if((out_bits & (1<<X_AXIS))!=0){
#ifdef DUAL_X_CARRIAGE
if (active_extruder != 0)
WRITE(X2_DIR_PIN,INVERT_X_DIR);
else
#endif
WRITE(X_DIR_PIN, INVERT_X_DIR); WRITE(X_DIR_PIN, INVERT_X_DIR);
count_direction[X_AXIS]=-1; count_direction[X_AXIS]=-1;
} }
else{ else{
#ifdef DUAL_X_CARRIAGE
if (active_extruder != 0)
WRITE(X2_DIR_PIN,!INVERT_X_DIR);
else
#endif
WRITE(X_DIR_PIN, !INVERT_X_DIR); WRITE(X_DIR_PIN, !INVERT_X_DIR);
count_direction[X_AXIS]=1; count_direction[X_AXIS]=1;
} }
@ -371,6 +381,11 @@ ISR(TIMER1_COMPA_vect)
if ((((out_bits & (1<<X_AXIS)) != 0)&&(out_bits & (1<<Y_AXIS)) != 0)) { //-X occurs for -A and -B if ((((out_bits & (1<<X_AXIS)) != 0)&&(out_bits & (1<<Y_AXIS)) != 0)) { //-X occurs for -A and -B
#endif #endif
CHECK_ENDSTOPS CHECK_ENDSTOPS
{
#ifdef DUAL_X_CARRIAGE
// with 2 x-carriages, endstops are only checked in the homing direction for the active extruder
if ((active_extruder == 0 && X_HOME_DIR == -1) || (active_extruder != 0 && X2_HOME_DIR == -1))
#endif
{ {
#if defined(X_MIN_PIN) && X_MIN_PIN > -1 #if defined(X_MIN_PIN) && X_MIN_PIN > -1
bool x_min_endstop=(READ(X_MIN_PIN) != X_ENDSTOPS_INVERTING); bool x_min_endstop=(READ(X_MIN_PIN) != X_ENDSTOPS_INVERTING);
@ -383,8 +398,14 @@ ISR(TIMER1_COMPA_vect)
#endif #endif
} }
} }
}
else { // +direction else { // +direction
CHECK_ENDSTOPS CHECK_ENDSTOPS
{
#ifdef DUAL_X_CARRIAGE
// with 2 x-carriages, endstops are only checked in the homing direction for the active extruder
if ((active_extruder == 0 && X_HOME_DIR == 1) || (active_extruder != 0 && X2_HOME_DIR == 1))
#endif
{ {
#if defined(X_MAX_PIN) && X_MAX_PIN > -1 #if defined(X_MAX_PIN) && X_MAX_PIN > -1
bool x_max_endstop=(READ(X_MAX_PIN) != X_ENDSTOPS_INVERTING); bool x_max_endstop=(READ(X_MAX_PIN) != X_ENDSTOPS_INVERTING);
@ -397,6 +418,7 @@ ISR(TIMER1_COMPA_vect)
#endif #endif
} }
} }
}
#ifndef COREXY #ifndef COREXY
if ((out_bits & (1<<Y_AXIS)) != 0) { // -direction if ((out_bits & (1<<Y_AXIS)) != 0) { // -direction
@ -507,9 +529,19 @@ ISR(TIMER1_COMPA_vect)
counter_x += current_block->steps_x; counter_x += current_block->steps_x;
if (counter_x > 0) { if (counter_x > 0) {
#ifdef DUAL_X_CARRIAGE
if (active_extruder != 0)
WRITE(X2_STEP_PIN,!INVERT_X_STEP_PIN);
else
#endif
WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN); WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN);
counter_x -= current_block->step_event_count; counter_x -= current_block->step_event_count;
count_position[X_AXIS]+=count_direction[X_AXIS]; count_position[X_AXIS]+=count_direction[X_AXIS];
#ifdef DUAL_X_CARRIAGE
if (active_extruder != 0)
WRITE(X2_STEP_PIN,INVERT_X_STEP_PIN);
else
#endif
WRITE(X_STEP_PIN, INVERT_X_STEP_PIN); WRITE(X_STEP_PIN, INVERT_X_STEP_PIN);
} }
@ -685,6 +717,9 @@ void st_init()
#if defined(X_DIR_PIN) && X_DIR_PIN > -1 #if defined(X_DIR_PIN) && X_DIR_PIN > -1
SET_OUTPUT(X_DIR_PIN); SET_OUTPUT(X_DIR_PIN);
#endif #endif
#if defined(X2_DIR_PIN) && X2_DIR_PIN > -1
SET_OUTPUT(X2_DIR_PIN);
#endif
#if defined(Y_DIR_PIN) && Y_DIR_PIN > -1 #if defined(Y_DIR_PIN) && Y_DIR_PIN > -1
SET_OUTPUT(Y_DIR_PIN); SET_OUTPUT(Y_DIR_PIN);
#endif #endif
@ -711,6 +746,10 @@ void st_init()
SET_OUTPUT(X_ENABLE_PIN); SET_OUTPUT(X_ENABLE_PIN);
if(!X_ENABLE_ON) WRITE(X_ENABLE_PIN,HIGH); if(!X_ENABLE_ON) WRITE(X_ENABLE_PIN,HIGH);
#endif #endif
#if defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1
SET_OUTPUT(X2_ENABLE_PIN);
if(!X_ENABLE_ON) WRITE(X2_ENABLE_PIN,HIGH);
#endif
#if defined(Y_ENABLE_PIN) && Y_ENABLE_PIN > -1 #if defined(Y_ENABLE_PIN) && Y_ENABLE_PIN > -1
SET_OUTPUT(Y_ENABLE_PIN); SET_OUTPUT(Y_ENABLE_PIN);
if(!Y_ENABLE_ON) WRITE(Y_ENABLE_PIN,HIGH); if(!Y_ENABLE_ON) WRITE(Y_ENABLE_PIN,HIGH);
@ -788,6 +827,11 @@ void st_init()
WRITE(X_STEP_PIN,INVERT_X_STEP_PIN); WRITE(X_STEP_PIN,INVERT_X_STEP_PIN);
disable_x(); disable_x();
#endif #endif
#if defined(X2_STEP_PIN) && (X2_STEP_PIN > -1)
SET_OUTPUT(X2_STEP_PIN);
WRITE(X2_STEP_PIN,INVERT_X_STEP_PIN);
disable_x();
#endif
#if defined(Y_STEP_PIN) && (Y_STEP_PIN > -1) #if defined(Y_STEP_PIN) && (Y_STEP_PIN > -1)
SET_OUTPUT(Y_STEP_PIN); SET_OUTPUT(Y_STEP_PIN);
WRITE(Y_STEP_PIN,INVERT_Y_STEP_PIN); WRITE(Y_STEP_PIN,INVERT_Y_STEP_PIN);

View File

@ -8,6 +8,8 @@
#include "stepper.h" #include "stepper.h"
#include "ConfigurationStore.h" #include "ConfigurationStore.h"
int8_t encoderDiff; /* encoderDiff is updated from interrupt context and added to encoderPosition every LCD update */
/* Configuration settings */ /* Configuration settings */
int plaPreheatHotendTemp; int plaPreheatHotendTemp;
int plaPreheatHPBTemp; int plaPreheatHPBTemp;
@ -48,6 +50,9 @@ static void lcd_control_temperature_menu();
static void lcd_control_temperature_preheat_pla_settings_menu(); static void lcd_control_temperature_preheat_pla_settings_menu();
static void lcd_control_temperature_preheat_abs_settings_menu(); static void lcd_control_temperature_preheat_abs_settings_menu();
static void lcd_control_motion_menu(); static void lcd_control_motion_menu();
#ifdef DOGLCD
static void lcd_set_contrast();
#endif
static void lcd_control_retract_menu(); static void lcd_control_retract_menu();
static void lcd_sdcard_menu(); static void lcd_sdcard_menu();
@ -123,13 +128,11 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
#ifndef REPRAPWORLD_KEYPAD #ifndef REPRAPWORLD_KEYPAD
volatile uint8_t buttons;//Contains the bits of the currently pressed buttons. volatile uint8_t buttons;//Contains the bits of the currently pressed buttons.
#else #else
volatile uint16_t buttons;//Contains the bits of the currently pressed buttons (extended). volatile uint8_t buttons_reprapworld_keypad; // to store the reprapworld_keypad shiftregister values
#endif #endif
uint8_t currentMenuViewOffset; /* scroll offset in the current menu */ uint8_t currentMenuViewOffset; /* scroll offset in the current menu */
uint32_t blocking_enc; uint32_t blocking_enc;
uint8_t lastEncoderBits; uint8_t lastEncoderBits;
int8_t encoderDiff; /* encoderDiff is updated from interrupt context and added to encoderPosition every LCD update */
uint32_t encoderPosition; uint32_t encoderPosition;
#if (SDCARDDETECT > 0) #if (SDCARDDETECT > 0)
bool lcd_oldcardstatus; bool lcd_oldcardstatus;
@ -174,8 +177,8 @@ static void lcd_status_screen()
} }
// Dead zone at 100% feedrate // Dead zone at 100% feedrate
if (feedmultiply < 100 && (feedmultiply + int(encoderPosition)) > 100 || if ((feedmultiply < 100 && (feedmultiply + int(encoderPosition)) > 100) ||
feedmultiply > 100 && (feedmultiply + int(encoderPosition)) < 100) (feedmultiply > 100 && (feedmultiply + int(encoderPosition)) < 100))
{ {
encoderPosition = 0; encoderPosition = 0;
feedmultiply = 100; feedmultiply = 100;
@ -364,9 +367,9 @@ static void lcd_move_x()
if (encoderPosition != 0) if (encoderPosition != 0)
{ {
current_position[X_AXIS] += float((int)encoderPosition) * move_menu_scale; current_position[X_AXIS] += float((int)encoderPosition) * move_menu_scale;
if (current_position[X_AXIS] < X_MIN_POS) if (min_software_endstops && current_position[X_AXIS] < X_MIN_POS)
current_position[X_AXIS] = X_MIN_POS; current_position[X_AXIS] = X_MIN_POS;
if (current_position[X_AXIS] > X_MAX_POS) if (max_software_endstops && current_position[X_AXIS] > X_MAX_POS)
current_position[X_AXIS] = X_MAX_POS; current_position[X_AXIS] = X_MAX_POS;
encoderPosition = 0; encoderPosition = 0;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600, active_extruder); plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600, active_extruder);
@ -388,9 +391,9 @@ static void lcd_move_y()
if (encoderPosition != 0) if (encoderPosition != 0)
{ {
current_position[Y_AXIS] += float((int)encoderPosition) * move_menu_scale; current_position[Y_AXIS] += float((int)encoderPosition) * move_menu_scale;
if (current_position[Y_AXIS] < Y_MIN_POS) if (min_software_endstops && current_position[Y_AXIS] < Y_MIN_POS)
current_position[Y_AXIS] = Y_MIN_POS; current_position[Y_AXIS] = Y_MIN_POS;
if (current_position[Y_AXIS] > Y_MAX_POS) if (max_software_endstops && current_position[Y_AXIS] > Y_MAX_POS)
current_position[Y_AXIS] = Y_MAX_POS; current_position[Y_AXIS] = Y_MAX_POS;
encoderPosition = 0; encoderPosition = 0;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600, active_extruder); plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600, active_extruder);
@ -412,12 +415,12 @@ static void lcd_move_z()
if (encoderPosition != 0) if (encoderPosition != 0)
{ {
current_position[Z_AXIS] += float((int)encoderPosition) * move_menu_scale; current_position[Z_AXIS] += float((int)encoderPosition) * move_menu_scale;
if (current_position[Z_AXIS] < Z_MIN_POS) if (min_software_endstops && current_position[Z_AXIS] < Z_MIN_POS)
current_position[Z_AXIS] = Z_MIN_POS; current_position[Z_AXIS] = Z_MIN_POS;
if (current_position[Z_AXIS] > Z_MAX_POS) if (max_software_endstops && current_position[Z_AXIS] > Z_MAX_POS)
current_position[Z_AXIS] = Z_MAX_POS; current_position[Z_AXIS] = Z_MAX_POS;
encoderPosition = 0; encoderPosition = 0;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 60, active_extruder); plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[Z_AXIS]/60, active_extruder);
lcdDrawUpdate = 1; lcdDrawUpdate = 1;
} }
if (lcdDrawUpdate) if (lcdDrawUpdate)
@ -499,6 +502,10 @@ static void lcd_control_menu()
MENU_ITEM(back, MSG_MAIN, lcd_main_menu); MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu); MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu);
MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu); MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu);
#ifdef DOGLCD
// MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63);
MENU_ITEM(submenu, MSG_CONTRAST, lcd_set_contrast);
#endif
#ifdef FWRETRACT #ifdef FWRETRACT
MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu); MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu);
#endif #endif
@ -610,6 +617,31 @@ static void lcd_control_motion_menu()
END_MENU(); END_MENU();
} }
#ifdef DOGLCD
static void lcd_set_contrast()
{
if (encoderPosition != 0)
{
lcd_contrast -= encoderPosition;
if (lcd_contrast < 0) lcd_contrast = 0;
else if (lcd_contrast > 63) lcd_contrast = 63;
encoderPosition = 0;
lcdDrawUpdate = 1;
u8g.setContrast(lcd_contrast);
}
if (lcdDrawUpdate)
{
lcd_implementation_drawedit(PSTR("Contrast"), itostr2(lcd_contrast));
}
if (LCD_CLICKED)
{
lcd_quick_feedback();
currentMenu = lcd_control_menu;
encoderPosition = 0;
}
}
#endif
#ifdef FWRETRACT #ifdef FWRETRACT
static void lcd_control_retract_menu() static void lcd_control_retract_menu()
{ {
@ -743,6 +775,26 @@ menu_edit_type(float, float52, ftostr52, 100)
menu_edit_type(unsigned long, long5, ftostr5, 0.01) menu_edit_type(unsigned long, long5, ftostr5, 0.01)
#ifdef REPRAPWORLD_KEYPAD #ifdef REPRAPWORLD_KEYPAD
static void reprapworld_keypad_move_z_up() {
encoderPosition = 1;
move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
lcd_move_z();
}
static void reprapworld_keypad_move_z_down() {
encoderPosition = -1;
move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
lcd_move_z();
}
static void reprapworld_keypad_move_x_left() {
encoderPosition = -1;
move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
lcd_move_x();
}
static void reprapworld_keypad_move_x_right() {
encoderPosition = 1;
move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
lcd_move_x();
}
static void reprapworld_keypad_move_y_down() { static void reprapworld_keypad_move_y_down() {
encoderPosition = 1; encoderPosition = 1;
move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP; move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
@ -754,9 +806,7 @@ menu_edit_type(unsigned long, long5, ftostr5, 0.01)
lcd_move_y(); lcd_move_y();
} }
static void reprapworld_keypad_move_home() { static void reprapworld_keypad_move_home() {
//enquecommand_P((PSTR("G28"))); // move all axis home enquecommand_P((PSTR("G28"))); // move all axis home
// TODO gregor: move all axis home, i have currently only one axis on my prusa i3
enquecommand_P((PSTR("G28 Y")));
} }
#endif #endif
@ -885,6 +935,18 @@ void lcd_update()
{ {
#ifdef ULTIPANEL #ifdef ULTIPANEL
#ifdef REPRAPWORLD_KEYPAD #ifdef REPRAPWORLD_KEYPAD
if (REPRAPWORLD_KEYPAD_MOVE_Z_UP) {
reprapworld_keypad_move_z_up();
}
if (REPRAPWORLD_KEYPAD_MOVE_Z_DOWN) {
reprapworld_keypad_move_z_down();
}
if (REPRAPWORLD_KEYPAD_MOVE_X_LEFT) {
reprapworld_keypad_move_x_left();
}
if (REPRAPWORLD_KEYPAD_MOVE_X_RIGHT) {
reprapworld_keypad_move_x_right();
}
if (REPRAPWORLD_KEYPAD_MOVE_Y_DOWN) { if (REPRAPWORLD_KEYPAD_MOVE_Y_DOWN) {
reprapworld_keypad_move_y_down(); reprapworld_keypad_move_y_down();
} }
@ -969,6 +1031,14 @@ void lcd_reset_alert_level()
lcd_status_message_level = 0; lcd_status_message_level = 0;
} }
#ifdef DOGLCD
void lcd_setcontrast(uint8_t value)
{
lcd_contrast = value & 63;
u8g.setContrast(lcd_contrast);
}
#endif
#ifdef ULTIPANEL #ifdef ULTIPANEL
/* Warning: This function is called from interrupt context */ /* Warning: This function is called from interrupt context */
void lcd_buttons_update() void lcd_buttons_update()
@ -981,6 +1051,7 @@ void lcd_buttons_update()
if((blocking_enc<millis()) && (READ(BTN_ENC)==0)) if((blocking_enc<millis()) && (READ(BTN_ENC)==0))
newbutton |= EN_C; newbutton |= EN_C;
#endif #endif
buttons = newbutton;
#ifdef REPRAPWORLD_KEYPAD #ifdef REPRAPWORLD_KEYPAD
// for the reprapworld_keypad // for the reprapworld_keypad
uint8_t newbutton_reprapworld_keypad=0; uint8_t newbutton_reprapworld_keypad=0;
@ -993,9 +1064,8 @@ void lcd_buttons_update()
WRITE(SHIFT_CLK,HIGH); WRITE(SHIFT_CLK,HIGH);
WRITE(SHIFT_CLK,LOW); WRITE(SHIFT_CLK,LOW);
} }
newbutton |= ((~newbutton_reprapworld_keypad) << REPRAPWORLD_BTN_OFFSET); //invert it, because a pressed switch produces a logical 0 buttons_reprapworld_keypad=~newbutton_reprapworld_keypad; //invert it, because a pressed switch produces a logical 0
#endif #endif
buttons = newbutton;
#else //read it from the shift register #else //read it from the shift register
uint8_t newbutton=0; uint8_t newbutton=0;
WRITE(SHIFT_LD,LOW); WRITE(SHIFT_LD,LOW);

View File

@ -12,6 +12,11 @@
void lcd_setalertstatuspgm(const char* message); void lcd_setalertstatuspgm(const char* message);
void lcd_reset_alert_level(); void lcd_reset_alert_level();
#ifdef DOGLCD
extern int lcd_contrast;
void lcd_setcontrast(uint8_t value);
#endif
static unsigned char blink = 0; // Variable for visualisation of fan rotation in GLCD static unsigned char blink = 0; // Variable for visualisation of fan rotation in GLCD
#define LCD_MESSAGEPGM(x) lcd_setstatuspgm(PSTR(x)) #define LCD_MESSAGEPGM(x) lcd_setstatuspgm(PSTR(x))
@ -22,6 +27,10 @@
#ifdef ULTIPANEL #ifdef ULTIPANEL
void lcd_buttons_update(); void lcd_buttons_update();
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
#ifdef REPRAPWORLD_KEYPAD
extern volatile uint8_t buttons_reprapworld_keypad; // to store the keypad shiftregister values
#endif
#else #else
FORCE_INLINE void lcd_buttons_update() {} FORCE_INLINE void lcd_buttons_update() {}
#endif #endif
@ -37,6 +46,45 @@
void lcd_buzz(long duration,uint16_t freq); void lcd_buzz(long duration,uint16_t freq);
bool lcd_clicked(); bool lcd_clicked();
#ifdef NEWPANEL
#define EN_C (1<<BLEN_C)
#define EN_B (1<<BLEN_B)
#define EN_A (1<<BLEN_A)
#define LCD_CLICKED (buttons&EN_C)
#ifdef REPRAPWORLD_KEYPAD
#define EN_REPRAPWORLD_KEYPAD_F3 (1<<BLEN_REPRAPWORLD_KEYPAD_F3)
#define EN_REPRAPWORLD_KEYPAD_F2 (1<<BLEN_REPRAPWORLD_KEYPAD_F2)
#define EN_REPRAPWORLD_KEYPAD_F1 (1<<BLEN_REPRAPWORLD_KEYPAD_F1)
#define EN_REPRAPWORLD_KEYPAD_UP (1<<BLEN_REPRAPWORLD_KEYPAD_UP)
#define EN_REPRAPWORLD_KEYPAD_RIGHT (1<<BLEN_REPRAPWORLD_KEYPAD_RIGHT)
#define EN_REPRAPWORLD_KEYPAD_MIDDLE (1<<BLEN_REPRAPWORLD_KEYPAD_MIDDLE)
#define EN_REPRAPWORLD_KEYPAD_DOWN (1<<BLEN_REPRAPWORLD_KEYPAD_DOWN)
#define EN_REPRAPWORLD_KEYPAD_LEFT (1<<BLEN_REPRAPWORLD_KEYPAD_LEFT)
#define LCD_CLICKED ((buttons&EN_C) || (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_F1))
#define REPRAPWORLD_KEYPAD_MOVE_Z_UP (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_F2)
#define REPRAPWORLD_KEYPAD_MOVE_Z_DOWN (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_F3)
#define REPRAPWORLD_KEYPAD_MOVE_X_LEFT (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_LEFT)
#define REPRAPWORLD_KEYPAD_MOVE_X_RIGHT (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_RIGHT)
#define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_DOWN)
#define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_UP)
#define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_MIDDLE)
#endif //REPRAPWORLD_KEYPAD
#else
//atomatic, do not change
#define B_LE (1<<BL_LE)
#define B_UP (1<<BL_UP)
#define B_MI (1<<BL_MI)
#define B_DW (1<<BL_DW)
#define B_RI (1<<BL_RI)
#define B_ST (1<<BL_ST)
#define EN_B (1<<BLEN_B)
#define EN_A (1<<BLEN_A)
#define LCD_CLICKED ((buttons&B_MI)||(buttons&B_ST))
#endif//NEWPANEL
#else //no lcd #else //no lcd
FORCE_INLINE void lcd_update() {} FORCE_INLINE void lcd_update() {}
FORCE_INLINE void lcd_init() {} FORCE_INLINE void lcd_init() {}

View File

@ -41,6 +41,8 @@ Features:
* Heater power reporting. Useful for PID monitoring. * Heater power reporting. Useful for PID monitoring.
* PID tuning * PID tuning
* CoreXY kinematics (www.corexy.com/theory.html) * CoreXY kinematics (www.corexy.com/theory.html)
* Delta kinematics
* Dual X-carriage support for multiple extruder systems
* Configurable serial port to support connection of wireless adaptors. * Configurable serial port to support connection of wireless adaptors.
* Automatic operation of extruder/cold-end cooling fans based on nozzle temperature * Automatic operation of extruder/cold-end cooling fans based on nozzle temperature
* RC Servo Support, specify angle or duration for continuous rotation servos. * RC Servo Support, specify angle or duration for continuous rotation servos.
@ -142,17 +144,9 @@ Implemented G Codes:
* G91 - Use Relative Coordinates * G91 - Use Relative Coordinates
* G92 - Set current position to cordinates given * G92 - Set current position to cordinates given
RepRap M Codes M Codes
* M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled) * M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled)
* M1 - Same as M0 * M1 - Same as M0
* M104 - Set extruder target temp
* M105 - Read current temp
* M106 - Fan on
* M107 - Fan off
* M109 - Wait for extruder current temp to reach target temp.
* M114 - Display current position
Custom M Codes
* M17 - Enable/Power all stepper motors * M17 - Enable/Power all stepper motors
* M18 - Disable all stepper motors; same as M84 * M18 - Disable all stepper motors; same as M84
* M20 - List SD card * M20 - List SD card
@ -167,6 +161,7 @@ Custom M Codes
* M29 - Stop SD write * M29 - Stop SD write
* M30 - Delete file from SD (M30 filename.g) * M30 - Delete file from SD (M30 filename.g)
* M31 - Output time since last M109 or SD card start to serial * M31 - Output time since last M109 or SD card start to serial
* M32 - Select file and start SD print (Can be used when printing from SD card)
* M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used. * M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used.
* M80 - Turn on Power Supply * M80 - Turn on Power Supply
* M81 - Turn off Power Supply * M81 - Turn off Power Supply
@ -175,6 +170,12 @@ Custom M Codes
* M84 - Disable steppers until next move, or use S<seconds> to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout. * M84 - Disable steppers until next move, or use S<seconds> to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout.
* M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default) * M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
* M92 - Set axis_steps_per_unit - same syntax as G92 * M92 - Set axis_steps_per_unit - same syntax as G92
* M104 - Set extruder target temp
* M105 - Read current temp
* M106 - Fan on
* M107 - Fan off
* M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating
* Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling
* M114 - Output current position to serial port * M114 - Output current position to serial port
* M115 - Capabilities string * M115 - Capabilities string
* M117 - display message * M117 - display message
@ -184,7 +185,8 @@ Custom M Codes
* M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil) * M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil) * M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M140 - Set bed target temp * M140 - Set bed target temp
* M190 - Wait for bed current temp to reach target temp. * M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating
* Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
* M200 - Set filament diameter * M200 - Set filament diameter
* M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) * M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
* M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!! * M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!!