Clean up autostart handling

Marlin/Marlin_main.cpp

@@ -1200,7 +1200,6 @@ inline void get_serial_commands() {
                 leds.set_off();
               #endif
             #endif // PRINTER_EVENT_LEDS
-            card.checkautostart(true);
           }
         }
         else if (n == -1) {
@@ -14413,7 +14412,7 @@ void loop() {
 
   #if ENABLED(SDSUPPORT)
 
-    card.checkautostart(false);
+    card.checkautostart();
 
     #if ENABLED(ULTIPANEL)
       if (abort_sd_printing) {

Marlin/cardreader.cpp

@@ -54,15 +54,13 @@ CardReader::CardReader() {
   workDirDepth = 0;
   ZERO(workDirParents);
 
-  autostart_stilltocheck = true; //the SD start is delayed, because otherwise the serial cannot answer fast enough to make contact with the host software.
-  autostart_index = 0;
+  // Disable autostart until card is initialized
+  autostart_index = -1;
 
   //power to SD reader
   #if SDPOWER > -1
     OUT_WRITE(SDPOWER, HIGH);
-  #endif // SDPOWER
-
-  next_autostart_ms = millis() + 5000;
+  #endif
 }
 
 char *createFilename(char *buffer, const dir_t &p) { //buffer > 12characters
@@ -566,40 +564,42 @@ void CardReader::write_command(char *buf) {
   }
 }
 
-void CardReader::checkautostart(bool force) {
-  if (!force && (!autostart_stilltocheck || PENDING(millis(), next_autostart_ms)))
-    return;
+//
+// Run the next autostart file. Called:
+// - On boot after successful card init
+// - After finishing the previous autostart file
+// - From the LCD command to run the autostart file
+//
 
-  autostart_stilltocheck = false;
+void CardReader::checkautostart() {
 
-  if (!cardOK) {
-    initsd();
-    if (!cardOK) return; // fail
-  }
+  if (autostart_index < 0 || sdprinting) return;
 
+  if (!cardOK) initsd();
+
+  if (cardOK) {
     char autoname[10];
     sprintf_P(autoname, PSTR("auto%i.g"), autostart_index);
-  for (int8_t i = 0; i < (int8_t)strlen(autoname); i++) autoname[i] = tolower(autoname[i]);
-
     dir_t p;
-
     root.rewind();
-
-  bool found = false;
     while (root.readDir(p, NULL) > 0) {
       for (int8_t i = (int8_t)strlen((char*)p.name); i--;) p.name[i] = tolower(p.name[i]);
       if (p.name[9] != '~' && strncmp((char*)p.name, autoname, 5) == 0) {
         openAndPrintFile(autoname);
-      found = true;
-    }
-  }
-  if (!found)
-    autostart_index = -1;
-  else
         autostart_index++;
+        return;
+      }
+    }
+  }
+  autostart_index = -1;
 }
 
-void CardReader::closefile(bool store_location) {
+void CardReader::beginautostart() {
+  autostart_index = 0;
+  setroot();
+}
+
+void CardReader::closefile(const bool store_location) {
   file.sync();
   file.close();
   saving = logging = false;

Marlin/cardreader.h

@@ -41,16 +41,14 @@ public:
 
   void initsd();
   void write_command(char *buf);
-  // Files auto[0-9].g on the sd card are performed in sequence.
-  // This is to delay autostart and hence the initialisation of
-  // the sd card to some seconds after the normal init, so the
-  // device is available soon after a reset.
 
-  void checkautostart(bool x);
+  void beginautostart();
+  void checkautostart();
+
   void openFile(char* name, const bool read, const bool subcall=false);
   void openLogFile(char* name);
   void removeFile(const char * const name);
-  void closefile(bool store_location=false);
+  void closefile(const bool store_location=false);
   void release();
   void openAndPrintFile(const char *name);
   void startFileprint();
@@ -189,9 +187,6 @@ private:
   char proc_filenames[SD_PROCEDURE_DEPTH][MAXPATHNAMELENGTH];
   uint32_t filesize, sdpos;
 
-  millis_t next_autostart_ms;
-  bool autostart_stilltocheck; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware.
-
   LsAction lsAction; //stored for recursion.
   uint16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory.
   char* diveDirName;

Marlin/ultralcd.cpp

@@ -1802,11 +1802,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
   #if ENABLED(SDSUPPORT) && ENABLED(MENU_ADDAUTOSTART)
 
-    void lcd_autostart_sd() {
-      card.autostart_index = 0;
-      card.setroot();
-      card.checkautostart(true);
-    }
+    void lcd_autostart_sd() { card.beginautostart(); }
 
   #endif
 
@@ -5136,9 +5132,12 @@ void lcd_update() {
       lcd_sd_status = sd_status;
 
       if (sd_status) {
-        safe_delay(1000); // some boards need a delay or the LCD won't show the new status
+        safe_delay(500); // Some boards need a delay to get settled
         card.initsd();
-        if (old_sd_status != 2) LCD_MESSAGEPGM(MSG_SD_INSERTED);
+        if (old_sd_status == 2)
+          card.beginautostart();  // Initial boot
+        else
+          LCD_MESSAGEPGM(MSG_SD_INSERTED);
       }
       else {
         card.release();