diff --git a/Marlin/language_it.h b/Marlin/language_it.h index d529e5871..80d64132e 100644 --- a/Marlin/language_it.h +++ b/Marlin/language_it.h @@ -75,6 +75,8 @@ #define MSG_MOVE_AXIS _UxGT("Muovi Asse") #define MSG_BED_LEVELING _UxGT("Livella piano") #define MSG_LEVEL_BED _UxGT("Livella piano") +#define MSG_LEVEL_CORNERS _UxGT("Livella spigoli") +#define MSG_NEXT_CORNER _UxGT("Prossimo spigolo") #define MSG_EDITING_STOPPED _UxGT("Modifica Mesh Fermata") #define MSG_USER_MENU _UxGT("Comandi Utente") @@ -85,7 +87,7 @@ #define MSG_UBL_MANUAL_MESH _UxGT("Mesh Manuale") #define MSG_UBL_BC_INSERT _UxGT("Metti spessore & misura") #define MSG_UBL_BC_INSERT2 _UxGT("Misura") -#define MSG_UBL_BC_REMOVE _UxGT("Rimuovi & misura piatto") +#define MSG_UBL_BC_REMOVE _UxGT("Rimuovi e misura piatto") #define MSG_UBL_MOVING_TO_NEXT _UxGT("Spostamento sucessivo") #define MSG_UBL_ACTIVATE_MESH _UxGT("Attiva UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Disattiva UBL") @@ -93,6 +95,7 @@ #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp Ugello") #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_MESH_EDIT _UxGT("Modifica Mesh") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Modif Custom Mesh") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Ritocca Mesh") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh") @@ -132,11 +135,34 @@ #define MSG_UBL_STORAGE_SLOT _UxGT("Slot di memoria") #define MSG_UBL_LOAD_MESH _UxGT("Carica Mesh Piatto") #define MSG_UBL_SAVE_MESH _UxGT("Salva Mesh Piatto") +#define MSG_MESH_LOADED _UxGT("Mesh %i caricata") +#define MSG_MESH_SAVED _UxGT("Mesh %i salvata") +#define MSG_NO_STORAGE _UxGT("Nessuna memoria") #define MSG_UBL_SAVE_ERROR _UxGT("Err: Salvataggio UBL") #define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ripristino UBL") #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Fermato") #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL passo passo") +#define MSG_LED_CONTROL _UxGT("Controllo LED") +#define MSG_LEDS_ON _UxGT("Luci On") +#define MSG_LEDS_OFF _UxGT("Luci Off") +#define MSG_LED_PRESETS _UxGT("Preset luci") +#define MSG_SET_LEDS_RED _UxGT("Rosso") +#define MSG_SET_LEDS_ORANGE _UxGT("Arancione") +#define MSG_SET_LEDS_YELLOW _UxGT("Giallo") +#define MSG_SET_LEDS_GREEN _UxGT("Verde") +#define MSG_SET_LEDS_BLUE _UxGT("Blu") +#define MSG_SET_LEDS_INDIGO _UxGT("Indaco") +#define MSG_SET_LEDS_VIOLET _UxGT("Viola") +#define MSG_SET_LEDS_WHITE _UxGT("Bianco") +#define MSG_SET_LEDS_DEFAULT _UxGT("Predefinito") +#define MSG_CUSTOM_LEDS _UxGT("Luci personalizzate") +#define MSG_INTENSITY_R _UxGT("Intensita rosso") +#define MSG_INTENSITY_G _UxGT("Intensita verde") +#define MSG_INTENSITY_B _UxGT("Intensita blu") +#define MSG_INTENSITY_W _UxGT("Intensita bianco") +#define MSG_LED_BRIGHTNESS _UxGT("Luminosita") + #define MSG_MOVING _UxGT("In movimento...") #define MSG_FREE_XY _UxGT("XY liberi") #define MSG_MOVE_X _UxGT("Muovi X") @@ -150,7 +176,8 @@ #define MSG_BED_Z _UxGT("piatto Z") #define MSG_NOZZLE _UxGT("Ugello") #define MSG_BED _UxGT("Piatto") -#define MSG_FAN_SPEED _UxGT("Velocità ventola") +#define MSG_FAN_SPEED _UxGT("Velocita ventola") +#define MSG_EXTRA_FAN_SPEED _UxGT("Magg vel ventola") #define MSG_FLOW _UxGT("Flusso") #define MSG_CONTROL _UxGT("Controllo") #define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") @@ -205,6 +232,8 @@ #define MSG_FILAMENT _UxGT("Filamento") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_FILAMENT_DIAM _UxGT("Diam. filo") +#define MSG_FILAMENT_UNLOAD _UxGT("Rimuovi mm") +#define MSG_FILAMENT_LOAD _UxGT("Carica mm") #define MSG_ADVANCE_K _UxGT("K Avanzamento") #define MSG_CONTRAST _UxGT("Contrasto LCD") #define MSG_STORE_EEPROM _UxGT("Salva in memoria") @@ -235,11 +264,16 @@ #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Scamb. UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") +#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") #define MSG_AUTORETRACT _UxGT("AutoRitrai") #define MSG_FILAMENTCHANGE _UxGT("Cambia filamento") +#define MSG_FILAMENTLOAD _UxGT("Carica filamento") +#define MSG_FILAMENTUNLOAD _UxGT("Rimuovi filamento") +#define MSG_FILAMENTUNLOAD_ALL _UxGT("Rimuovi tutto") #define MSG_INIT_SDCARD _UxGT("Iniz. SD-Card") #define MSG_CNG_SDCARD _UxGT("Cambia SD-Card") #define MSG_ZPROBE_OUT _UxGT("Z probe out. bed") +#define MSG_SKEW_FACTOR _UxGT("Fattore distorsione") #define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch") #define MSG_BLTOUCH_RESET _UxGT("Resetta BLTouch") @@ -274,8 +308,12 @@ #define MSG_DELTA_CALIBRATE_Y _UxGT("Calibra Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Calibra Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibra Center") +#define MSG_DELTA_SETTINGS _UxGT("Impostaz. Delta") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto calibrazione") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Imp. altezza Delta") +#define MSG_DELTA_DIAG_ROD _UxGT("Barra Diagonale") +#define MSG_DELTA_HEIGHT _UxGT("Altezza") +#define MSG_DELTA_RADIUS _UxGT("Raggio") #define MSG_INFO_MENU _UxGT("Riguardo stampante") #define MSG_INFO_PRINTER_MENU _UxGT("Info. stampante") #define MSG_3POINT_LEVELING _UxGT("Livel. a 3 punti") @@ -314,9 +352,15 @@ #define MSG_DAC_EEPROM_WRITE _UxGT("Scrivi DAC EEPROM") #define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("STAMPA IN PAUSA") +#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CARICA FILAMENTO") +#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("RIMUOVI FILAMENTO") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPZIONI:") +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Libera di piu") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Riprendi stampa") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Ugello: ") +#define MSG_ERR_HOMING_FAILED _UxGT("Home fallito") +#define MSG_ERR_PROBING_FAILED _UxGT("Probing fallito") +#define MSG_M600_TOO_COLD _UxGT("M600:Troppo freddo") #if LCD_HEIGHT >= 4 // Up to 3 lines allowed @@ -336,6 +380,9 @@ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attendere") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("il caricamento") #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("del filamento") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Attendere") + #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("lo spurgo") + #define MSG_FILAMENT_CHANGE_PURGE_3 _UxGT("del filamento") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attendere") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("la ripresa") #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("della stampa") @@ -344,8 +391,10 @@ #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Espulsione...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci e premi") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Riscalda ugello") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Riscaldamento...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Caricamento...") + #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Spurgo filamento") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Ripresa...") #endif // LCD_HEIGHT < 4