From 44f327d7380cbcac042bf6be2b23129595146dfa Mon Sep 17 00:00:00 2001 From: Guillaume Seguin Date: Tue, 23 Jul 2013 22:13:40 +0200 Subject: [PATCH] Uniformly reindent language.h --- Marlin/language.h | 958 +++++++++++++++++++++++----------------------- 1 file changed, 479 insertions(+), 479 deletions(-) diff --git a/Marlin/language.h b/Marlin/language.h index 6b925195b..17222c7cd 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -373,169 +373,169 @@ #if LANGUAGE_CHOICE == 3 -#define WELCOME_MSG MACHINE_NAME " Pret." -#define MSG_SD_INSERTED "Carte inseree" -#define MSG_SD_REMOVED "Carte retiree" -#define MSG_MAIN " Principal \003" -#define MSG_AUTOSTART " Demarrage auto." -#define MSG_DISABLE_STEPPERS " Desactiver moteurs" -#define MSG_AUTO_HOME " Home auto." -#define MSG_SET_ORIGIN " Regler origine" -#define MSG_PREHEAT_PLA " Prechauffage PLA" -#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA" -#define MSG_PREHEAT_ABS " Prechauffage ABS" -#define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS" -#define MSG_COOLDOWN " Refroidissement" -#define MSG_SWITCH_PS_ON "Allumer alimentation" -#define MSG_SWITCH_PS_OFF "Eteindre alimentation" -#define MSG_EXTRUDE " Extrusion" -#define MSG_RETRACT " Retractation" -#define MSG_PREHEAT_PLA " Prechauffage PLA" -#define MSG_PREHEAT_ABS " Prechauffage ABS" -#define MSG_MOVE_AXIS " Deplacer axe \x7E" -#define MSG_SPEED " Vitesse:" -#define MSG_NOZZLE " \002Buse:" -#define MSG_NOZZLE1 " \002Buse2:" -#define MSG_NOZZLE2 " \002Buse3:" -#define MSG_BED " \002Lit:" -#define MSG_FAN_SPEED " Vitesse ventilateur:" -#define MSG_FLOW " Flux:" -#define MSG_CONTROL " Controle \003" -#define MSG_MIN " \002 Min:" -#define MSG_MAX " \002 Max:" -#define MSG_FACTOR " \002 Facteur:" -#define MSG_AUTOTEMP " Temp. Auto.:" -#define MSG_ON "Marche " -#define MSG_OFF "Arret" -#define MSG_PID_P " PID-P: " -#define MSG_PID_I " PID-I: " -#define MSG_PID_D " PID-D: " -#define MSG_PID_C " PID-C: " -#define MSG_ACC " Acc:" -#define MSG_VXY_JERK "Vxy-jerk" -#define MSG_VZ_JERK "Vz-jerk" -#define MSG_VE_JERK "Ve-jerk" -#define MSG_VMAX " Vmax " -#define MSG_X "x:" -#define MSG_Y "y:" -#define MSG_Z "z:" -#define MSG_E "e:" -#define MSG_VMIN " Vmin:" -#define MSG_VTRAV_MIN " Vdepl min:" -#define MSG_AMAX " Amax " -#define MSG_A_RETRACT " A-retract:" -#define MSG_XSTEPS " Xpas/mm:" -#define MSG_YSTEPS " Ypas/mm:" -#define MSG_ZSTEPS " Zpas/mm:" -#define MSG_ESTEPS " Epas/mm:" -#define MSG_MAIN_WIDE " Principal \003" -#define MSG_RECTRACT "Rectracter" -#define MSG_TEMPERATURE "Temperature" -#define MSG_MOTION "Mouvement" -#define MSG_CONTRAST "LCD contrast" -#define MSG_STORE_EPROM " Sauvegarder memoire" -#define MSG_LOAD_EPROM " Lire memoire" -#define MSG_RESTORE_FAILSAFE " Restaurer memoire" -#define MSG_REFRESH "\004Actualiser" -#define MSG_WATCH " Surveiller \003" -#define MSG_PREPARE " Preparer \x7E" -#define MSG_PREPARE_ALT " Prepare \003" -#define MSG_CONTROL_ARROW " Controle \x7E" -#define MSG_RETRACT_ARROW " Retracter \x7E" -#define MSG_TUNE " Regler \x7E" -#define MSG_PAUSE_PRINT " Pause impression \x7E" -#define MSG_RESUME_PRINT " Reprendre impression \x7E" -#define MSG_STOP_PRINT " Arreter impression \x7E" -#define MSG_CARD_MENU " Menu carte \x7E" -#define MSG_NO_CARD " Pas de carte" -#define MSG_DWELL "Repos..." -#define MSG_USERWAIT "Attente de l'utilisateur..." -#define MSG_RESUMING "Reprise de l'impression" -#define MSG_NO_MOVE "Aucun mouvement." -#define MSG_PART_RELEASE "Relache partielle" -#define MSG_KILLED "TUE." -#define MSG_STOPPED "STOPPE." -#define MSG_STEPPER_RELEASED "RELACHE." -#define MSG_CONTROL_RETRACT " Retractation mm:" -#define MSG_CONTROL_RETRACTF " Retractation F:" -#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" -#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" -#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" -#define MSG_AUTORETRACT " Retract. Auto.:" -#define MSG_FILAMENTCHANGE "Change filament" -#define MSG_INIT_SDCARD "Init. la carte SD" -#define MSG_CNG_SDCARD "Changer de carte SD" + #define WELCOME_MSG MACHINE_NAME " Pret." + #define MSG_SD_INSERTED "Carte inseree" + #define MSG_SD_REMOVED "Carte retiree" + #define MSG_MAIN " Principal \003" + #define MSG_AUTOSTART " Demarrage auto." + #define MSG_DISABLE_STEPPERS " Desactiver moteurs" + #define MSG_AUTO_HOME " Home auto." + #define MSG_SET_ORIGIN " Regler origine" + #define MSG_PREHEAT_PLA " Prechauffage PLA" + #define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA" + #define MSG_PREHEAT_ABS " Prechauffage ABS" + #define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS" + #define MSG_COOLDOWN " Refroidissement" + #define MSG_SWITCH_PS_ON "Allumer alimentation" + #define MSG_SWITCH_PS_OFF "Eteindre alimentation" + #define MSG_EXTRUDE " Extrusion" + #define MSG_RETRACT " Retractation" + #define MSG_PREHEAT_PLA " Prechauffage PLA" + #define MSG_PREHEAT_ABS " Prechauffage ABS" + #define MSG_MOVE_AXIS " Deplacer axe \x7E" + #define MSG_SPEED " Vitesse:" + #define MSG_NOZZLE " \002Buse:" + #define MSG_NOZZLE1 " \002Buse2:" + #define MSG_NOZZLE2 " \002Buse3:" + #define MSG_BED " \002Lit:" + #define MSG_FAN_SPEED " Vitesse ventilateur:" + #define MSG_FLOW " Flux:" + #define MSG_CONTROL " Controle \003" + #define MSG_MIN " \002 Min:" + #define MSG_MAX " \002 Max:" + #define MSG_FACTOR " \002 Facteur:" + #define MSG_AUTOTEMP " Temp. Auto.:" + #define MSG_ON "Marche " + #define MSG_OFF "Arret" + #define MSG_PID_P " PID-P: " + #define MSG_PID_I " PID-I: " + #define MSG_PID_D " PID-D: " + #define MSG_PID_C " PID-C: " + #define MSG_ACC " Acc:" + #define MSG_VXY_JERK "Vxy-jerk" + #define MSG_VZ_JERK "Vz-jerk" + #define MSG_VE_JERK "Ve-jerk" + #define MSG_VMAX " Vmax " + #define MSG_X "x:" + #define MSG_Y "y:" + #define MSG_Z "z:" + #define MSG_E "e:" + #define MSG_VMIN " Vmin:" + #define MSG_VTRAV_MIN " Vdepl min:" + #define MSG_AMAX " Amax " + #define MSG_A_RETRACT " A-retract:" + #define MSG_XSTEPS " Xpas/mm:" + #define MSG_YSTEPS " Ypas/mm:" + #define MSG_ZSTEPS " Zpas/mm:" + #define MSG_ESTEPS " Epas/mm:" + #define MSG_MAIN_WIDE " Principal \003" + #define MSG_RECTRACT "Rectracter" + #define MSG_TEMPERATURE "Temperature" + #define MSG_MOTION "Mouvement" + #define MSG_CONTRAST "LCD contrast" + #define MSG_STORE_EPROM " Sauvegarder memoire" + #define MSG_LOAD_EPROM " Lire memoire" + #define MSG_RESTORE_FAILSAFE " Restaurer memoire" + #define MSG_REFRESH "\004Actualiser" + #define MSG_WATCH " Surveiller \003" + #define MSG_PREPARE " Preparer \x7E" + #define MSG_PREPARE_ALT " Prepare \003" + #define MSG_CONTROL_ARROW " Controle \x7E" + #define MSG_RETRACT_ARROW " Retracter \x7E" + #define MSG_TUNE " Regler \x7E" + #define MSG_PAUSE_PRINT " Pause impression \x7E" + #define MSG_RESUME_PRINT " Reprendre impression \x7E" + #define MSG_STOP_PRINT " Arreter impression \x7E" + #define MSG_CARD_MENU " Menu carte \x7E" + #define MSG_NO_CARD " Pas de carte" + #define MSG_DWELL "Repos..." + #define MSG_USERWAIT "Attente de l'utilisateur..." + #define MSG_RESUMING "Reprise de l'impression" + #define MSG_NO_MOVE "Aucun mouvement." + #define MSG_PART_RELEASE "Relache partielle" + #define MSG_KILLED "TUE." + #define MSG_STOPPED "STOPPE." + #define MSG_STEPPER_RELEASED "RELACHE." + #define MSG_CONTROL_RETRACT " Retractation mm:" + #define MSG_CONTROL_RETRACTF " Retractation F:" + #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" + #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" + #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" + #define MSG_AUTORETRACT " Retract. Auto.:" + #define MSG_FILAMENTCHANGE "Change filament" + #define MSG_INIT_SDCARD "Init. la carte SD" + #define MSG_CNG_SDCARD "Changer de carte SD" // Serial Console Messages -#define MSG_Enqueing "Mise en tampon \"" -#define MSG_POWERUP "Allumage" -#define MSG_EXTERNAL_RESET " RAZ Externe" -#define MSG_BROWNOUT_RESET " RAZ defaut alim." -#define MSG_WATCHDOG_RESET " RAZ Watchdog" -#define MSG_SOFTWARE_RESET " RAZ logicielle" -#define MSG_MARLIN "Marlin " -#define MSG_AUTHOR " | Auteur: " -#define MSG_CONFIGURATION_VER " Derniere MaJ: " -#define MSG_FREE_MEMORY " Memoire libre: " -#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " -#define MSG_OK "ok" -#define MSG_FILE_SAVED "Fichier enregistre." -#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: " -#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: " -#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: " -#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: " -#define MSG_FILE_PRINTED "Impression terminee" -#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers" -#define MSG_END_FILE_LIST "Fin de la liste de fichiers" -#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide" -#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide" -#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide" -#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature" -#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide " -#define MSG_HEATING "En chauffe..." -#define MSG_HEATING_COMPLETE "Chauffe terminee." -#define MSG_BED_HEATING "Chauffe du lit." -#define MSG_BED_DONE "Chauffe du lit terminee." -#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" -#define MSG_COUNT_X " Compteur X: " -#define MSG_ERR_KILLED "Impression arretee. kill() appelee!" -#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)" -#define MSG_RESEND "Renvoie: " -#define MSG_UNKNOWN_COMMAND "Commande inconnue: \"" -#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: " -#define MSG_INVALID_EXTRUDER "Extrudeur invalide" -#define MSG_X_MIN "x_min: " -#define MSG_X_MAX "x_max: " -#define MSG_Y_MIN "y_min: " -#define MSG_Y_MAX "y_max: " -#define MSG_Z_MIN "z_min: " -#define MSG_Z_MAX "z_max: " -#define MSG_M119_REPORT "Affichage du status des fin de course" -#define MSG_ENDSTOP_HIT "DECLENCHE" -#define MSG_ENDSTOP_OPEN "OUVERT" -#define MSG_HOTEND_OFFSET "Hotend offsets:" + #define MSG_Enqueing "Mise en tampon \"" + #define MSG_POWERUP "Allumage" + #define MSG_EXTERNAL_RESET " RAZ Externe" + #define MSG_BROWNOUT_RESET " RAZ defaut alim." + #define MSG_WATCHDOG_RESET " RAZ Watchdog" + #define MSG_SOFTWARE_RESET " RAZ logicielle" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Auteur: " + #define MSG_CONFIGURATION_VER " Derniere MaJ: " + #define MSG_FREE_MEMORY " Memoire libre: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Fichier enregistre." + #define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: " + #define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: " + #define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: " + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: " + #define MSG_FILE_PRINTED "Impression terminee" + #define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers" + #define MSG_END_FILE_LIST "Fin de la liste de fichiers" + #define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide" + #define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide" + #define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide" + #define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature" + #define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide " + #define MSG_HEATING "En chauffe..." + #define MSG_HEATING_COMPLETE "Chauffe terminee." + #define MSG_BED_HEATING "Chauffe du lit." + #define MSG_BED_DONE "Chauffe du lit terminee." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Compteur X: " + #define MSG_ERR_KILLED "Impression arretee. kill() appelee!" + #define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)" + #define MSG_RESEND "Renvoie: " + #define MSG_UNKNOWN_COMMAND "Commande inconnue: \"" + #define MSG_ACTIVE_EXTRUDER "Extrudeur actif: " + #define MSG_INVALID_EXTRUDER "Extrudeur invalide" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Affichage du status des fin de course" + #define MSG_ENDSTOP_HIT "DECLENCHE" + #define MSG_ENDSTOP_OPEN "OUVERT" + #define MSG_HOTEND_OFFSET "Hotend offsets:" -#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire" -#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD" -#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init" -#define MSG_SD_OPENROOT_FAIL "Echec openRoot" -#define MSG_SD_CARD_OK "Carte SD Ok" -#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir" -#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: " -#define MSG_SD_FILE_OPENED "Fichier ouvert: " -#define MSG_SD_SIZE " Taille: " -#define MSG_SD_FILE_SELECTED "Fichier selectionne" -#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: " -#define MSG_SD_PRINTING_BYTE "Octet impression SD " -#define MSG_SD_NOT_PRINTING "Pas d'impression SD" -#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier" -#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: " + #define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire" + #define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD" + #define MSG_SD_VOL_INIT_FAIL "Echec de volume.init" + #define MSG_SD_OPENROOT_FAIL "Echec openRoot" + #define MSG_SD_CARD_OK "Carte SD Ok" + #define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir" + #define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: " + #define MSG_SD_FILE_OPENED "Fichier ouvert: " + #define MSG_SD_SIZE " Taille: " + #define MSG_SD_FILE_SELECTED "Fichier selectionne" + #define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: " + #define MSG_SD_PRINTING_BYTE "Octet impression SD " + #define MSG_SD_NOT_PRINTING "Pas d'impression SD" + #define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier" + #define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: " -#define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: " -#define MSG_ENDSTOPS_HIT "Fin de course atteint: " -#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee" -#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee" + #define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: " + #define MSG_ENDSTOPS_HIT "Fin de course atteint: " + #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee" + #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee" #endif @@ -617,21 +617,21 @@ #define MSG_NO_CARD "Keine SDKarte" #define MSG_DWELL "Warten..." #define MSG_USERWAIT "Warte auf Nutzer..." - #define MSG_RESUMING "Druck fortsetzung" + #define MSG_RESUMING "Druck fortsetzung" #define MSG_NO_MOVE "Kein Zug." #define MSG_PART_RELEASE "Stepper tlw frei" #define MSG_KILLED "KILLED" #define MSG_STOPPED "GESTOPPT" #define MSG_STEPPER_RELEASED "Stepper frei" - #define MSG_CONTROL_RETRACT "Retract mm" - #define MSG_CONTROL_RETRACTF "Retract F" - #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" - #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" - #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" - #define MSG_AUTORETRACT "AutoRetr." - #define MSG_FILAMENTCHANGE "Filament wechseln" - #define MSG_INIT_SDCARD "Init. SD-Card" - #define MSG_CNG_SDCARD "Change SD-Card" + #define MSG_CONTROL_RETRACT "Retract mm" + #define MSG_CONTROL_RETRACTF "Retract F" + #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" + #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" + #define MSG_AUTORETRACT "AutoRetr." + #define MSG_FILAMENTCHANGE "Filament wechseln" + #define MSG_INIT_SDCARD "Init. SD-Card" + #define MSG_CNG_SDCARD "Change SD-Card" // Serial Console Messages @@ -710,329 +710,329 @@ #if LANGUAGE_CHOICE == 5 // LCD Menu Messages -#define WELCOME_MSG MACHINE_NAME "Lista." -#define MSG_SD_INSERTED "Tarjeta SD Colocada" -#define MSG_SD_REMOVED "Tarjeta SD Retirada" -#define MSG_MAIN "Menu Principal" -#define MSG_AUTOSTART " Autostart" -#define MSG_DISABLE_STEPPERS "Apagar Motores" -#define MSG_AUTO_HOME "Llevar al Origen" // "Llevar Ejes al Cero" -#define MSG_SET_ORIGIN "Establecer Cero" -#define MSG_PREHEAT_PLA "Precalentar PLA" -#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA" -#define MSG_PREHEAT_ABS "Precalentar ABS" -#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS" -#define MSG_COOLDOWN "Enfriar" -#define MSG_SWITCH_PS_ON "Switch Power On" -#define MSG_SWITCH_PS_OFF "Switch Power Off" -#define MSG_EXTRUDE "Extruir" -#define MSG_RETRACT "Retraer" -#define MSG_MOVE_AXIS "Mover Ejes" -#define MSG_SPEED "Velocidad" -#define MSG_NOZZLE "Nozzle" -#define MSG_NOZZLE1 "Nozzle2" -#define MSG_NOZZLE2 "Nozzle3" -#define MSG_BED "Base" -#define MSG_FAN_SPEED "Ventilador" -#define MSG_FLOW "Flujo" -#define MSG_CONTROL "Control" -#define MSG_MIN "\002 Min" -#define MSG_MAX "\002 Max" -#define MSG_FACTOR "\002 Fact" -#define MSG_AUTOTEMP "Autotemp" -#define MSG_ON "On" -#define MSG_OFF "Off" -#define MSG_PID_P "PID-P" -#define MSG_PID_I "PID-I" -#define MSG_PID_D "PID-D" -#define MSG_PID_C "PID-C" -#define MSG_ACC "Acel" -#define MSG_VXY_JERK "Vxy-jerk" -#define MSG_VZ_JERK "Vz-jerk" -#define MSG_VE_JERK "Ve-jerk" -#define MSG_VMAX "Vmax" -#define MSG_X "x" -#define MSG_Y "y" -#define MSG_Z "z" -#define MSG_E "e" -#define MSG_VMIN "Vmin" -#define MSG_VTRAV_MIN "VTrav min" -#define MSG_AMAX "Amax" -#define MSG_A_RETRACT "A-retrac." -#define MSG_XSTEPS "X pasos/mm" -#define MSG_YSTEPS "Y pasos/mm" -#define MSG_ZSTEPS "Z pasos/mm" -#define MSG_ESTEPS "E pasos/mm" -#define MSG_RECTRACT "Retraer" -#define MSG_TEMPERATURE "Temperatura" -#define MSG_MOTION "Movimiento" -#define MSG_STORE_EPROM "Guardar Memoria" -#define MSG_LOAD_EPROM "Cargar Memoria" -#define MSG_RESTORE_FAILSAFE "Rest. de emergencia" -#define MSG_REFRESH "Volver a cargar" -#define MSG_WATCH "Monitorizar" -#define MSG_PREPARE "Preparar" -#define MSG_TUNE "Ajustar" -#define MSG_PAUSE_PRINT "Pausar Impresion" -#define MSG_RESUME_PRINT "Reanudar Impresion" -#define MSG_STOP_PRINT "Detener Impresion" -#define MSG_CARD_MENU "Menu de SD" -#define MSG_NO_CARD "No hay Tarjeta SD" -#define MSG_DWELL "Reposo..." -#define MSG_USERWAIT "Esperando Ordenes..." -#define MSG_RESUMING "Resumiendo Impresion" -#define MSG_NO_MOVE "Sin movimiento" -#define MSG_KILLED "PARADA DE EMERGENCIA. " -#define MSG_STOPPED "PARADA." -#define MSG_CONTROL_RETRACT "Retraer mm" -#define MSG_CONTROL_RETRACTF "Retraer F" -#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm" -#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm" -#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F" -#define MSG_AUTORETRACT "AutoRetr." -#define MSG_FILAMENTCHANGE "Change filament" -#define MSG_INIT_SDCARD "Iniciando. Tarjeta-SD" -#define MSG_CNG_SDCARD "Cambiar Tarjeta-SD" -#define MSG_RECTRACT_WIDE "Retraer" -#define MSG_TEMPERATURE_WIDE "Temperatura" -#define MSG_TEMPERATURE_RTN "Temperatura" -#define MSG_MAIN_WIDE "Menu Principal" -#define MSG_MOTION_WIDE "Movimiento" -#define MSG_PREPARE_ALT "Preparar" -#define MSG_CONTROL_ARROW "Control" -#define MSG_RETRACT_ARROW "Retraer" -#define MSG_PART_RELEASE "Desacople Parcial" -#define MSG_STEPPER_RELEASED "Desacoplada." + #define WELCOME_MSG MACHINE_NAME "Lista." + #define MSG_SD_INSERTED "Tarjeta SD Colocada" + #define MSG_SD_REMOVED "Tarjeta SD Retirada" + #define MSG_MAIN "Menu Principal" + #define MSG_AUTOSTART " Autostart" + #define MSG_DISABLE_STEPPERS "Apagar Motores" + #define MSG_AUTO_HOME "Llevar al Origen" // "Llevar Ejes al Cero" + #define MSG_SET_ORIGIN "Establecer Cero" + #define MSG_PREHEAT_PLA "Precalentar PLA" + #define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA" + #define MSG_PREHEAT_ABS "Precalentar ABS" + #define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS" + #define MSG_COOLDOWN "Enfriar" + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" + #define MSG_EXTRUDE "Extruir" + #define MSG_RETRACT "Retraer" + #define MSG_MOVE_AXIS "Mover Ejes" + #define MSG_SPEED "Velocidad" + #define MSG_NOZZLE "Nozzle" + #define MSG_NOZZLE1 "Nozzle2" + #define MSG_NOZZLE2 "Nozzle3" + #define MSG_BED "Base" + #define MSG_FAN_SPEED "Ventilador" + #define MSG_FLOW "Flujo" + #define MSG_CONTROL "Control" + #define MSG_MIN "\002 Min" + #define MSG_MAX "\002 Max" + #define MSG_FACTOR "\002 Fact" + #define MSG_AUTOTEMP "Autotemp" + #define MSG_ON "On" + #define MSG_OFF "Off" + #define MSG_PID_P "PID-P" + #define MSG_PID_I "PID-I" + #define MSG_PID_D "PID-D" + #define MSG_PID_C "PID-C" + #define MSG_ACC "Acel" + #define MSG_VXY_JERK "Vxy-jerk" + #define MSG_VZ_JERK "Vz-jerk" + #define MSG_VE_JERK "Ve-jerk" + #define MSG_VMAX "Vmax" + #define MSG_X "x" + #define MSG_Y "y" + #define MSG_Z "z" + #define MSG_E "e" + #define MSG_VMIN "Vmin" + #define MSG_VTRAV_MIN "VTrav min" + #define MSG_AMAX "Amax" + #define MSG_A_RETRACT "A-retrac." + #define MSG_XSTEPS "X pasos/mm" + #define MSG_YSTEPS "Y pasos/mm" + #define MSG_ZSTEPS "Z pasos/mm" + #define MSG_ESTEPS "E pasos/mm" + #define MSG_RECTRACT "Retraer" + #define MSG_TEMPERATURE "Temperatura" + #define MSG_MOTION "Movimiento" + #define MSG_STORE_EPROM "Guardar Memoria" + #define MSG_LOAD_EPROM "Cargar Memoria" + #define MSG_RESTORE_FAILSAFE "Rest. de emergencia" + #define MSG_REFRESH "Volver a cargar" + #define MSG_WATCH "Monitorizar" + #define MSG_PREPARE "Preparar" + #define MSG_TUNE "Ajustar" + #define MSG_PAUSE_PRINT "Pausar Impresion" + #define MSG_RESUME_PRINT "Reanudar Impresion" + #define MSG_STOP_PRINT "Detener Impresion" + #define MSG_CARD_MENU "Menu de SD" + #define MSG_NO_CARD "No hay Tarjeta SD" + #define MSG_DWELL "Reposo..." + #define MSG_USERWAIT "Esperando Ordenes..." + #define MSG_RESUMING "Resumiendo Impresion" + #define MSG_NO_MOVE "Sin movimiento" + #define MSG_KILLED "PARADA DE EMERGENCIA. " + #define MSG_STOPPED "PARADA." + #define MSG_CONTROL_RETRACT "Retraer mm" + #define MSG_CONTROL_RETRACTF "Retraer F" + #define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm" + #define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "DesRet F" + #define MSG_AUTORETRACT "AutoRetr." + #define MSG_FILAMENTCHANGE "Change filament" + #define MSG_INIT_SDCARD "Iniciando. Tarjeta-SD" + #define MSG_CNG_SDCARD "Cambiar Tarjeta-SD" + #define MSG_RECTRACT_WIDE "Retraer" + #define MSG_TEMPERATURE_WIDE "Temperatura" + #define MSG_TEMPERATURE_RTN "Temperatura" + #define MSG_MAIN_WIDE "Menu Principal" + #define MSG_MOTION_WIDE "Movimiento" + #define MSG_PREPARE_ALT "Preparar" + #define MSG_CONTROL_ARROW "Control" + #define MSG_RETRACT_ARROW "Retraer" + #define MSG_PART_RELEASE "Desacople Parcial" + #define MSG_STEPPER_RELEASED "Desacoplada." // Serial Console Messages -#define MSG_Enqueing "En cola \"" -#define MSG_POWERUP "PowerUp" -#define MSG_EXTERNAL_RESET " Reset Externo" -#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" -#define MSG_WATCHDOG_RESET " Reset por Bloqueo" -#define MSG_SOFTWARE_RESET " Reset por Software" -#define MSG_MARLIN "Marlin " -#define MSG_AUTHOR " | Autor: " -#define MSG_CONFIGURATION_VER " Ultima actualizacion: " -#define MSG_FREE_MEMORY " Memoria libre: " -#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " -#define MSG_OK "ok" -#define MSG_FILE_SAVED "Guardado." -#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:" -#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:" -#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:" -#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:" -#define MSG_FILE_PRINTED "Impresion terminada" -#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos" -#define MSG_END_FILE_LIST "Fin de la lista de archivos" -#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " -#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " -#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido " -#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp" -#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " -#define MSG_HEATING "Calentando..." -#define MSG_HEATING_COMPLETE "Calentamiento Hecho." -#define MSG_BED_HEATING "Calentando la base." -#define MSG_BED_DONE "Base Caliente." -#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" -#define MSG_COUNT_X " Cuenta X:" -#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!" -#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)" -#define MSG_RESEND "Reenviar:" -#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\"" -#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " -#define MSG_INVALID_EXTRUDER "Extrusor Invalido" -#define MSG_X_MIN "x_min: " -#define MSG_X_MAX "x_max: " -#define MSG_Y_MIN "y_min: " -#define MSG_Y_MAX "y_max: " -#define MSG_Z_MIN "z_min: " -#define MSG_Z_MAX "z_max: " -#define MSG_M119_REPORT "Comprobando fines de carrera." -#define MSG_ENDSTOP_HIT "PULSADO" -#define MSG_ENDSTOP_OPEN "abierto" -#define MSG_HOTEND_OFFSET "Hotend offsets:" -#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." -#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" -#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" -#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz" -#define MSG_SD_CARD_OK "Tarjeta SD OK" -#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo" -#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: " -#define MSG_SD_FILE_OPENED "Archivo abierto:" -#define MSG_SD_SIZE " Tamaño:" -#define MSG_SD_FILE_SELECTED "Archivo Seleccionado" -#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: " -#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte " -#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD" -#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo" -#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:" + #define MSG_Enqueing "En cola \"" + #define MSG_POWERUP "PowerUp" + #define MSG_EXTERNAL_RESET " Reset Externo" + #define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" + #define MSG_WATCHDOG_RESET " Reset por Bloqueo" + #define MSG_SOFTWARE_RESET " Reset por Software" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Autor: " + #define MSG_CONFIGURATION_VER " Ultima actualizacion: " + #define MSG_FREE_MEMORY " Memoria libre: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Guardado." + #define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:" + #define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:" + #define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:" + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:" + #define MSG_FILE_PRINTED "Impresion terminada" + #define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos" + #define MSG_END_FILE_LIST "Fin de la lista de archivos" + #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " + #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " + #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido " + #define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp" + #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " + #define MSG_HEATING "Calentando..." + #define MSG_HEATING_COMPLETE "Calentamiento Hecho." + #define MSG_BED_HEATING "Calentando la base." + #define MSG_BED_DONE "Base Caliente." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Cuenta X:" + #define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!" + #define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)" + #define MSG_RESEND "Reenviar:" + #define MSG_UNKNOWN_COMMAND "Comando Desconocido:\"" + #define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " + #define MSG_INVALID_EXTRUDER "Extrusor Invalido" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Comprobando fines de carrera." + #define MSG_ENDSTOP_HIT "PULSADO" + #define MSG_ENDSTOP_OPEN "abierto" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + #define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." + #define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" + #define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" + #define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz" + #define MSG_SD_CARD_OK "Tarjeta SD OK" + #define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo" + #define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: " + #define MSG_SD_FILE_OPENED "Archivo abierto:" + #define MSG_SD_SIZE " Tamaño:" + #define MSG_SD_FILE_SELECTED "Archivo Seleccionado" + #define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: " + #define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte " + #define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD" + #define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo" + #define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:" -#define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : " -#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " -#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" -#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" + #define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : " + #define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " + #define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" + #define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" #endif #if LANGUAGE_CHOICE == 6 -// LCD Menu Messages -#define WELCOME_MSG MACHINE_NAME " Готов" -#define MSG_SD_INSERTED "Карта вставлена" -#define MSG_SD_REMOVED "Карта извлечена" -#define MSG_MAIN " Меню \003" -#define MSG_AUTOSTART " Автостарт " -#define MSG_DISABLE_STEPPERS " Выключить двигатели" -#define MSG_AUTO_HOME " Парковка " -#define MSG_SET_ORIGIN " Запомнить ноль " -#define MSG_PREHEAT_PLA " Преднагрев PLA " -#define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA" -#define MSG_PREHEAT_ABS " Преднагрев ABS " -#define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS" -#define MSG_COOLDOWN " Охлаждение " -#define MSG_SWITCH_PS_ON "Switch Power On" -#define MSG_SWITCH_PS_OFF "Switch Power Off" -#define MSG_EXTRUDE " Экструзия " -#define MSG_RETRACT " Откат" -#define MSG_MOVE_AXIS " Движение по осям \x7E" -#define MSG_SPEED " Скорость:" -#define MSG_NOZZLE " \002 Фильера:" -#define MSG_NOZZLE1 " \002 Фильера2:" -#define MSG_NOZZLE2 " \002 Фильера3:" -#define MSG_BED " \002 Кровать:" -#define MSG_FAN_SPEED " Куллер:" -#define MSG_FLOW " Поток:" -#define MSG_CONTROL " Настройки \003" -#define MSG_MIN " \002 Минимум:" -#define MSG_MAX " \002 Максимум:" -#define MSG_FACTOR " \002 Фактор:" -#define MSG_AUTOTEMP " Autotemp:" -#define MSG_ON "Вкл. " -#define MSG_OFF "Выкл. " -#define MSG_PID_P " PID-P: " -#define MSG_PID_I " PID-I: " -#define MSG_PID_D " PID-D: " -#define MSG_PID_C " PID-C: " -#define MSG_ACC " Acc:" -#define MSG_VXY_JERK " Vxy-jerk: " -#define MSG_VZ_JERK "Vz-jerk" -#define MSG_VE_JERK "Ve-jerk" -#define MSG_VMAX " Vmax " -#define MSG_X "x:" -#define MSG_Y "y:" -#define MSG_Z "z:" -#define MSG_E "e:" -#define MSG_VMIN " Vmin:" -#define MSG_VTRAV_MIN " VTrav min:" -#define MSG_AMAX " Amax " -#define MSG_A_RETRACT " A-retract:" -#define MSG_XSTEPS " X шаг/mm:" -#define MSG_YSTEPS " Y шаг/mm:" -#define MSG_ZSTEPS " Z шаг/mm:" -#define MSG_ESTEPS " E шаг/mm:" -#define MSG_RECTRACT " Откат подачи \x7E" -#define MSG_TEMPERATURE " Температура \x7E" -#define MSG_MOTION " Скорости \x7E" - #define MSG_CONTRAST "LCD contrast" -#define MSG_STORE_EPROM " Сохранить настройки" -#define MSG_LOAD_EPROM " Загрузить настройки" -#define MSG_RESTORE_FAILSAFE " Сброс настроек " -#define MSG_REFRESH "\004Обновить " -#define MSG_WATCH " Обзор \003" -#define MSG_PREPARE " Действия \x7E" -#define MSG_TUNE " Настройки \x7E" -#define MSG_PAUSE_PRINT " Пауза печати \x7E" -#define MSG_RESUME_PRINT " Продолжить печать \x7E" -#define MSG_STOP_PRINT " Остановить печать \x7E" -#define MSG_CARD_MENU " Меню карты \x7E" -#define MSG_NO_CARD " Нет карты" -#define MSG_DWELL "Сон..." -#define MSG_USERWAIT "Нажмите для продолж." -#define MSG_RESUMING "Resuming print" -#define MSG_NO_MOVE "Нет движения. " -#define MSG_PART_RELEASE " Извлечение принта " -#define MSG_KILLED "УБИТО. " -#define MSG_STOPPED "ОСТАНОВЛЕНО. " -#define MSG_CONTROL_RETRACT " Откат mm:" -#define MSG_CONTROL_RETRACTF " Откат F:" -#define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:" -#define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:" -#define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:" -#define MSG_AUTORETRACT " АвтоОткат:" -#define MSG_FILAMENTCHANGE "Change filament" -#define MSG_INIT_SDCARD "Init. SD-Card" -#define MSG_CNG_SDCARD "Change SD-Card" + // LCD Menu Messages + #define WELCOME_MSG MACHINE_NAME " Готов" + #define MSG_SD_INSERTED "Карта вставлена" + #define MSG_SD_REMOVED "Карта извлечена" + #define MSG_MAIN " Меню \003" + #define MSG_AUTOSTART " Автостарт " + #define MSG_DISABLE_STEPPERS " Выключить двигатели" + #define MSG_AUTO_HOME " Парковка " + #define MSG_SET_ORIGIN " Запомнить ноль " + #define MSG_PREHEAT_PLA " Преднагрев PLA " + #define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA" + #define MSG_PREHEAT_ABS " Преднагрев ABS " + #define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS" + #define MSG_COOLDOWN " Охлаждение " + #define MSG_SWITCH_PS_ON "Switch Power On" + #define MSG_SWITCH_PS_OFF "Switch Power Off" + #define MSG_EXTRUDE " Экструзия " + #define MSG_RETRACT " Откат" + #define MSG_MOVE_AXIS " Движение по осям \x7E" + #define MSG_SPEED " Скорость:" + #define MSG_NOZZLE " \002 Фильера:" + #define MSG_NOZZLE1 " \002 Фильера2:" + #define MSG_NOZZLE2 " \002 Фильера3:" + #define MSG_BED " \002 Кровать:" + #define MSG_FAN_SPEED " Куллер:" + #define MSG_FLOW " Поток:" + #define MSG_CONTROL " Настройки \003" + #define MSG_MIN " \002 Минимум:" + #define MSG_MAX " \002 Максимум:" + #define MSG_FACTOR " \002 Фактор:" + #define MSG_AUTOTEMP " Autotemp:" + #define MSG_ON "Вкл. " + #define MSG_OFF "Выкл. " + #define MSG_PID_P " PID-P: " + #define MSG_PID_I " PID-I: " + #define MSG_PID_D " PID-D: " + #define MSG_PID_C " PID-C: " + #define MSG_ACC " Acc:" + #define MSG_VXY_JERK " Vxy-jerk: " + #define MSG_VZ_JERK "Vz-jerk" + #define MSG_VE_JERK "Ve-jerk" + #define MSG_VMAX " Vmax " + #define MSG_X "x:" + #define MSG_Y "y:" + #define MSG_Z "z:" + #define MSG_E "e:" + #define MSG_VMIN " Vmin:" + #define MSG_VTRAV_MIN " VTrav min:" + #define MSG_AMAX " Amax " + #define MSG_A_RETRACT " A-retract:" + #define MSG_XSTEPS " X шаг/mm:" + #define MSG_YSTEPS " Y шаг/mm:" + #define MSG_ZSTEPS " Z шаг/mm:" + #define MSG_ESTEPS " E шаг/mm:" + #define MSG_RECTRACT " Откат подачи \x7E" + #define MSG_TEMPERATURE " Температура \x7E" + #define MSG_MOTION " Скорости \x7E" + #define MSG_CONTRAST "LCD contrast" + #define MSG_STORE_EPROM " Сохранить настройки" + #define MSG_LOAD_EPROM " Загрузить настройки" + #define MSG_RESTORE_FAILSAFE " Сброс настроек " + #define MSG_REFRESH "\004Обновить " + #define MSG_WATCH " Обзор \003" + #define MSG_PREPARE " Действия \x7E" + #define MSG_TUNE " Настройки \x7E" + #define MSG_PAUSE_PRINT " Пауза печати \x7E" + #define MSG_RESUME_PRINT " Продолжить печать \x7E" + #define MSG_STOP_PRINT " Остановить печать \x7E" + #define MSG_CARD_MENU " Меню карты \x7E" + #define MSG_NO_CARD " Нет карты" + #define MSG_DWELL "Сон..." + #define MSG_USERWAIT "Нажмите для продолж." + #define MSG_RESUMING "Resuming print" + #define MSG_NO_MOVE "Нет движения. " + #define MSG_PART_RELEASE " Извлечение принта " + #define MSG_KILLED "УБИТО. " + #define MSG_STOPPED "ОСТАНОВЛЕНО. " + #define MSG_CONTROL_RETRACT " Откат mm:" + #define MSG_CONTROL_RETRACTF " Откат F:" + #define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:" + #define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:" + #define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:" + #define MSG_AUTORETRACT " АвтоОткат:" + #define MSG_FILAMENTCHANGE "Change filament" + #define MSG_INIT_SDCARD "Init. SD-Card" + #define MSG_CNG_SDCARD "Change SD-Card" // Serial Console Messages -#define MSG_Enqueing "Запланировано \"" -#define MSG_POWERUP "Включение питания" -#define MSG_EXTERNAL_RESET " Внешний сброс" -#define MSG_BROWNOUT_RESET " Brown out сброс" -#define MSG_WATCHDOG_RESET " Watchdog сброс" -#define MSG_SOFTWARE_RESET " программный сброс" -#define MSG_MARLIN "Marlin " -#define MSG_AUTHOR " | Автор: " -#define MSG_CONFIGURATION_VER " Последнее обновление: " -#define MSG_FREE_MEMORY " Памяти свободно: " -#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: " -#define MSG_OK "ok" -#define MSG_FILE_SAVED "Файл записан." -#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:" -#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:" -#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:" -#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:" -#define MSG_FILE_PRINTED "Печать файла завершена" -#define MSG_BEGIN_FILE_LIST "Список файлов" -#define MSG_END_FILE_LIST "Конец списка файлов" -#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера " -#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера " -#define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера " -#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры" -#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера " -#define MSG_HEATING "Нагрев... " -#define MSG_HEATING_COMPLETE "Наргето. " -#define MSG_BED_HEATING "Нагрев стола... " -#define MSG_BED_DONE "Стол нагрет. " -#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" -#define MSG_COUNT_X " Count X:" -#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!" -#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)" -#define MSG_RESEND "Переотправка:" -#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\"" -#define MSG_ACTIVE_EXTRUDER "Активный экструдер: " -#define MSG_INVALID_EXTRUDER "Ошибка экструдера" -#define MSG_X_MIN "x_min:" -#define MSG_X_MAX "x_max:" -#define MSG_Y_MIN "y_min:" -#define MSG_Y_MAX "y_max:" -#define MSG_Z_MIN "z_min:" -#define MSG_Z_MAX "z_max:" -#define MSG_M119_REPORT "Статус концевиков" -#define MSG_ENDSTOP_HIT "Срабатывание концевика" -#define MSG_ENDSTOP_OPEN "Концевик освобожден" -#define MSG_HOTEND_OFFSET "Hotend offsets:" -#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку" -#define MSG_SD_INIT_FAIL "Ошибка инициализации SD" -#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела" -#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня" -#define MSG_SD_CARD_OK "SD карта в порядке" -#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку" -#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: " -#define MSG_SD_FILE_OPENED "Файл открыт:" -#define MSG_SD_SIZE " Размер:" -#define MSG_SD_FILE_SELECTED "Файл выбран" -#define MSG_SD_WRITE_TO_FILE "Запись в файл: " -#define MSG_SD_PRINTING_BYTE "SD печать byte " -#define MSG_SD_NOT_PRINTING "нет SD печати" -#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл" -#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:" -#define MSG_STEPPER_TOO_HIGH "Частота шагов очень высока : " -#define MSG_ENDSTOPS_HIT "концевик сработал: " -#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии" -#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии" + #define MSG_Enqueing "Запланировано \"" + #define MSG_POWERUP "Включение питания" + #define MSG_EXTERNAL_RESET " Внешний сброс" + #define MSG_BROWNOUT_RESET " Brown out сброс" + #define MSG_WATCHDOG_RESET " Watchdog сброс" + #define MSG_SOFTWARE_RESET " программный сброс" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Автор: " + #define MSG_CONFIGURATION_VER " Последнее обновление: " + #define MSG_FREE_MEMORY " Памяти свободно: " + #define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Файл записан." + #define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:" + #define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:" + #define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:" + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:" + #define MSG_FILE_PRINTED "Печать файла завершена" + #define MSG_BEGIN_FILE_LIST "Список файлов" + #define MSG_END_FILE_LIST "Конец списка файлов" + #define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера " + #define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера " + #define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера " + #define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры" + #define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера " + #define MSG_HEATING "Нагрев... " + #define MSG_HEATING_COMPLETE "Наргето. " + #define MSG_BED_HEATING "Нагрев стола... " + #define MSG_BED_DONE "Стол нагрет. " + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Count X:" + #define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!" + #define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)" + #define MSG_RESEND "Переотправка:" + #define MSG_UNKNOWN_COMMAND "Неизвестная команда:\"" + #define MSG_ACTIVE_EXTRUDER "Активный экструдер: " + #define MSG_INVALID_EXTRUDER "Ошибка экструдера" + #define MSG_X_MIN "x_min:" + #define MSG_X_MAX "x_max:" + #define MSG_Y_MIN "y_min:" + #define MSG_Y_MAX "y_max:" + #define MSG_Z_MIN "z_min:" + #define MSG_Z_MAX "z_max:" + #define MSG_M119_REPORT "Статус концевиков" + #define MSG_ENDSTOP_HIT "Срабатывание концевика" + #define MSG_ENDSTOP_OPEN "Концевик освобожден" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + #define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку" + #define MSG_SD_INIT_FAIL "Ошибка инициализации SD" + #define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела" + #define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня" + #define MSG_SD_CARD_OK "SD карта в порядке" + #define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку" + #define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: " + #define MSG_SD_FILE_OPENED "Файл открыт:" + #define MSG_SD_SIZE " Размер:" + #define MSG_SD_FILE_SELECTED "Файл выбран" + #define MSG_SD_WRITE_TO_FILE "Запись в файл: " + #define MSG_SD_PRINTING_BYTE "SD печать byte " + #define MSG_SD_NOT_PRINTING "нет SD печати" + #define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл" + #define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:" + #define MSG_STEPPER_TOO_HIGH "Частота шагов очень высока : " + #define MSG_ENDSTOPS_HIT "концевик сработал: " + #define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии" + #define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии" #endif