Overridable Options - Part 9 (PR#2561)
Apply `ENABLED` / `DISABLED` macros to temperature-related files.
This commit is contained in:
Scott Lahteine
Richard Wackerbarth
parent
c35fb88094
commit
51e89a269c
@ -34,7 +34,7 @@
|
||||
#define K2 (1.0-K1)
|
||||
#endif
|
||||
|
||||
#if defined(PIDTEMPBED) || defined(PIDTEMP)
|
||||
#if ENABLED(PIDTEMPBED) || ENABLED(PIDTEMP)
|
||||
#define PID_dT ((OVERSAMPLENR * 12.0)/(F_CPU / 64.0 / 256.0))
|
||||
#endif
|
||||
|
||||
@ -48,39 +48,39 @@ int current_temperature_raw[4] = { 0 };
|
||||
float current_temperature[4] = { 0.0 };
|
||||
int current_temperature_bed_raw = 0;
|
||||
float current_temperature_bed = 0.0;
|
||||
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
|
||||
int redundant_temperature_raw = 0;
|
||||
float redundant_temperature = 0.0;
|
||||
#endif
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
float bedKp=DEFAULT_bedKp;
|
||||
float bedKi=(DEFAULT_bedKi*PID_dT);
|
||||
float bedKd=(DEFAULT_bedKd/PID_dT);
|
||||
#endif //PIDTEMPBED
|
||||
|
||||
#ifdef FAN_SOFT_PWM
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
unsigned char fanSpeedSoftPwm;
|
||||
#endif
|
||||
|
||||
unsigned char soft_pwm_bed;
|
||||
|
||||
#ifdef BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
volatile int babystepsTodo[3] = { 0 };
|
||||
#endif
|
||||
|
||||
#ifdef FILAMENT_SENSOR
|
||||
#if ENABLED(FILAMENT_SENSOR)
|
||||
int current_raw_filwidth = 0; //Holds measured filament diameter - one extruder only
|
||||
#endif
|
||||
|
||||
#if defined(THERMAL_PROTECTION_HOTENDS) || defined(THERMAL_PROTECTION_BED)
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS) || ENABLED(THERMAL_PROTECTION_BED)
|
||||
enum TRState { TRReset, TRInactive, TRFirstHeating, TRStable, TRRunaway };
|
||||
void thermal_runaway_protection(TRState *state, millis_t *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc);
|
||||
#ifdef THERMAL_PROTECTION_HOTENDS
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
||||
static TRState thermal_runaway_state_machine[4] = { TRReset, TRReset, TRReset, TRReset };
|
||||
static millis_t thermal_runaway_timer[4]; // = {0,0,0,0};
|
||||
#endif
|
||||
#if defined(THERMAL_PROTECTION_BED) && TEMP_SENSOR_BED != 0
|
||||
#if ENABLED(THERMAL_PROTECTION_BED) && TEMP_SENSOR_BED != 0
|
||||
static TRState thermal_runaway_bed_state_machine = TRReset;
|
||||
static millis_t thermal_runaway_bed_timer;
|
||||
#endif
|
||||
@ -92,7 +92,7 @@ unsigned char soft_pwm_bed;
|
||||
|
||||
static volatile bool temp_meas_ready = false;
|
||||
|
||||
#ifdef PIDTEMP
|
||||
#if ENABLED(PIDTEMP)
|
||||
//static cannot be external:
|
||||
static float temp_iState[EXTRUDERS] = { 0 };
|
||||
static float temp_dState[EXTRUDERS] = { 0 };
|
||||
@ -105,7 +105,7 @@ static volatile bool temp_meas_ready = false;
|
||||
static float temp_iState_max[EXTRUDERS];
|
||||
static bool pid_reset[EXTRUDERS];
|
||||
#endif //PIDTEMP
|
||||
#ifdef PIDTEMPBED
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
//static cannot be external:
|
||||
static float temp_iState_bed = { 0 };
|
||||
static float temp_dState_bed = { 0 };
|
||||
@ -121,26 +121,26 @@ static volatile bool temp_meas_ready = false;
|
||||
#endif //PIDTEMPBED
|
||||
static unsigned char soft_pwm[EXTRUDERS];
|
||||
|
||||
#ifdef FAN_SOFT_PWM
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
static unsigned char soft_pwm_fan;
|
||||
#endif
|
||||
#if HAS_AUTO_FAN
|
||||
static millis_t next_auto_fan_check_ms;
|
||||
#endif
|
||||
|
||||
#ifdef PIDTEMP
|
||||
#ifdef PID_PARAMS_PER_EXTRUDER
|
||||
#if ENABLED(PIDTEMP)
|
||||
#if ENABLED(PID_PARAMS_PER_EXTRUDER)
|
||||
float Kp[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(DEFAULT_Kp);
|
||||
float Ki[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(DEFAULT_Ki*PID_dT);
|
||||
float Kd[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(DEFAULT_Kd / PID_dT);
|
||||
#ifdef PID_ADD_EXTRUSION_RATE
|
||||
#if ENABLED(PID_ADD_EXTRUSION_RATE)
|
||||
float Kc[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(DEFAULT_Kc);
|
||||
#endif // PID_ADD_EXTRUSION_RATE
|
||||
#else //PID_PARAMS_PER_EXTRUDER
|
||||
float Kp = DEFAULT_Kp;
|
||||
float Ki = DEFAULT_Ki * PID_dT;
|
||||
float Kd = DEFAULT_Kd / PID_dT;
|
||||
#ifdef PID_ADD_EXTRUSION_RATE
|
||||
#if ENABLED(PID_ADD_EXTRUSION_RATE)
|
||||
float Kc = DEFAULT_Kc;
|
||||
#endif // PID_ADD_EXTRUSION_RATE
|
||||
#endif // PID_PARAMS_PER_EXTRUDER
|
||||
@ -158,7 +158,7 @@ static int bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP;
|
||||
static int bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP;
|
||||
#endif
|
||||
|
||||
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
|
||||
static void *heater_ttbl_map[2] = {(void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE };
|
||||
static uint8_t heater_ttbllen_map[2] = { HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN };
|
||||
#else
|
||||
@ -170,7 +170,7 @@ static float analog2temp(int raw, uint8_t e);
|
||||
static float analog2tempBed(int raw);
|
||||
static void updateTemperaturesFromRawValues();
|
||||
|
||||
#ifdef THERMAL_PROTECTION_HOTENDS
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
||||
int watch_target_temp[EXTRUDERS] = { 0 };
|
||||
millis_t watch_heater_next_ms[EXTRUDERS] = { 0 };
|
||||
#endif
|
||||
@ -179,11 +179,11 @@ static void updateTemperaturesFromRawValues();
|
||||
#define SOFT_PWM_SCALE 0
|
||||
#endif
|
||||
|
||||
#ifdef FILAMENT_SENSOR
|
||||
#if ENABLED(FILAMENT_SENSOR)
|
||||
static int meas_shift_index; //used to point to a delayed sample in buffer for filament width sensor
|
||||
#endif
|
||||
|
||||
#ifdef HEATER_0_USES_MAX6675
|
||||
#if ENABLED(HEATER_0_USES_MAX6675)
|
||||
static int read_max6675();
|
||||
#endif
|
||||
|
||||
@ -354,12 +354,12 @@ void PID_autotune(float temp, int extruder, int ncycles) {
|
||||
}
|
||||
|
||||
void updatePID() {
|
||||
#ifdef PIDTEMP
|
||||
#if ENABLED(PIDTEMP)
|
||||
for (int e = 0; e < EXTRUDERS; e++) {
|
||||
temp_iState_max[e] = PID_INTEGRAL_DRIVE_MAX / PID_PARAM(Ki,e);
|
||||
}
|
||||
#endif
|
||||
#ifdef PIDTEMPBED
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
temp_iState_max_bed = PID_BED_INTEGRAL_DRIVE_MAX / bedKi;
|
||||
#endif
|
||||
}
|
||||
@ -453,7 +453,7 @@ inline void _temp_error(int e, const char *serial_msg, const char *lcd_msg) {
|
||||
SERIAL_ERRORPGM(MSG_STOPPED_HEATER);
|
||||
if (e >= 0) SERIAL_ERRORLN((int)e); else SERIAL_ERRORLNPGM(MSG_HEATER_BED);
|
||||
}
|
||||
#ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
|
||||
#if DISABLED(BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE)
|
||||
if (!killed) {
|
||||
Running = false;
|
||||
killed = true;
|
||||
@ -473,8 +473,8 @@ void min_temp_error(uint8_t e) {
|
||||
|
||||
float get_pid_output(int e) {
|
||||
float pid_output;
|
||||
#ifdef PIDTEMP
|
||||
#ifndef PID_OPENLOOP
|
||||
#if ENABLED(PIDTEMP)
|
||||
#if DISABLED(PID_OPENLOOP)
|
||||
pid_error[e] = target_temperature[e] - current_temperature[e];
|
||||
dTerm[e] = K2 * PID_PARAM(Kd,e) * (current_temperature[e] - temp_dState[e]) + K1 * dTerm[e];
|
||||
temp_dState[e] = current_temperature[e];
|
||||
@ -510,7 +510,7 @@ float get_pid_output(int e) {
|
||||
pid_output = constrain(target_temperature[e], 0, PID_MAX);
|
||||
#endif //PID_OPENLOOP
|
||||
|
||||
#ifdef PID_DEBUG
|
||||
#if ENABLED(PID_DEBUG)
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHO(MSG_PID_DEBUG);
|
||||
SERIAL_ECHO(e);
|
||||
@ -533,10 +533,10 @@ float get_pid_output(int e) {
|
||||
return pid_output;
|
||||
}
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
float get_pid_output_bed() {
|
||||
float pid_output;
|
||||
#ifndef PID_OPENLOOP
|
||||
#if DISABLED(PID_OPENLOOP)
|
||||
pid_error_bed = target_temperature_bed - current_temperature_bed;
|
||||
pTerm_bed = bedKp * pid_error_bed;
|
||||
temp_iState_bed += pid_error_bed;
|
||||
@ -559,7 +559,7 @@ float get_pid_output(int e) {
|
||||
pid_output = constrain(target_temperature_bed, 0, MAX_BED_POWER);
|
||||
#endif // PID_OPENLOOP
|
||||
|
||||
#ifdef PID_BED_DEBUG
|
||||
#if ENABLED(PID_BED_DEBUG)
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHO(" PID_BED_DEBUG ");
|
||||
SERIAL_ECHO(": Input ");
|
||||
@ -592,20 +592,20 @@ void manage_heater() {
|
||||
|
||||
updateTemperaturesFromRawValues();
|
||||
|
||||
#ifdef HEATER_0_USES_MAX6675
|
||||
#if ENABLED(HEATER_0_USES_MAX6675)
|
||||
float ct = current_temperature[0];
|
||||
if (ct > min(HEATER_0_MAXTEMP, 1023)) max_temp_error(0);
|
||||
if (ct < max(HEATER_0_MINTEMP, 0.01)) min_temp_error(0);
|
||||
#endif
|
||||
|
||||
#if defined(THERMAL_PROTECTION_HOTENDS) || !defined(PIDTEMPBED) || HAS_AUTO_FAN
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS) || DISABLED(PIDTEMPBED) || HAS_AUTO_FAN
|
||||
millis_t ms = millis();
|
||||
#endif
|
||||
|
||||
// Loop through all extruders
|
||||
for (int e = 0; e < EXTRUDERS; e++) {
|
||||
|
||||
#ifdef THERMAL_PROTECTION_HOTENDS
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
||||
thermal_runaway_protection(&thermal_runaway_state_machine[e], &thermal_runaway_timer[e], current_temperature[e], target_temperature[e], e, THERMAL_PROTECTION_PERIOD, THERMAL_PROTECTION_HYSTERESIS);
|
||||
#endif
|
||||
|
||||
@ -615,7 +615,7 @@ void manage_heater() {
|
||||
soft_pwm[e] = current_temperature[e] > minttemp[e] && current_temperature[e] < maxttemp[e] ? (int)pid_output >> 1 : 0;
|
||||
|
||||
// Check if the temperature is failing to increase
|
||||
#ifdef THERMAL_PROTECTION_HOTENDS
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
||||
|
||||
// Is it time to check this extruder's heater?
|
||||
if (watch_heater_next_ms[e] && ms > watch_heater_next_ms[e]) {
|
||||
@ -632,7 +632,7 @@ void manage_heater() {
|
||||
|
||||
#endif // THERMAL_PROTECTION_HOTENDS
|
||||
|
||||
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
|
||||
if (fabs(current_temperature[0] - redundant_temperature) > MAX_REDUNDANT_TEMP_SENSOR_DIFF) {
|
||||
_temp_error(0, PSTR(MSG_EXTRUDER_SWITCHED_OFF), PSTR(MSG_ERR_REDUNDANT_TEMP));
|
||||
}
|
||||
@ -648,7 +648,7 @@ void manage_heater() {
|
||||
#endif
|
||||
|
||||
// Control the extruder rate based on the width sensor
|
||||
#ifdef FILAMENT_SENSOR
|
||||
#if ENABLED(FILAMENT_SENSOR)
|
||||
if (filament_sensor) {
|
||||
meas_shift_index = delay_index1 - meas_delay_cm;
|
||||
if (meas_shift_index < 0) meas_shift_index += MAX_MEASUREMENT_DELAY + 1; //loop around buffer if needed
|
||||
@ -662,23 +662,23 @@ void manage_heater() {
|
||||
}
|
||||
#endif //FILAMENT_SENSOR
|
||||
|
||||
#ifndef PIDTEMPBED
|
||||
#if DISABLED(PIDTEMPBED)
|
||||
if (ms < next_bed_check_ms) return;
|
||||
next_bed_check_ms = ms + BED_CHECK_INTERVAL;
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_BED != 0
|
||||
|
||||
#ifdef THERMAL_PROTECTION_BED
|
||||
#if ENABLED(THERMAL_PROTECTION_BED)
|
||||
thermal_runaway_protection(&thermal_runaway_bed_state_machine, &thermal_runaway_bed_timer, current_temperature_bed, target_temperature_bed, -1, THERMAL_PROTECTION_BED_PERIOD, THERMAL_PROTECTION_BED_HYSTERESIS);
|
||||
#endif
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
float pid_output = get_pid_output_bed();
|
||||
|
||||
soft_pwm_bed = current_temperature_bed > BED_MINTEMP && current_temperature_bed < BED_MAXTEMP ? (int)pid_output >> 1 : 0;
|
||||
|
||||
#elif defined(BED_LIMIT_SWITCHING)
|
||||
#elif ENABLED(BED_LIMIT_SWITCHING)
|
||||
// Check if temperature is within the correct band
|
||||
if (current_temperature_bed > BED_MINTEMP && current_temperature_bed < BED_MAXTEMP) {
|
||||
if (current_temperature_bed >= target_temperature_bed + BED_HYSTERESIS)
|
||||
@ -707,7 +707,7 @@ void manage_heater() {
|
||||
// Derived from RepRap FiveD extruder::getTemperature()
|
||||
// For hot end temperature measurement.
|
||||
static float analog2temp(int raw, uint8_t e) {
|
||||
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
|
||||
if (e > EXTRUDERS)
|
||||
#else
|
||||
if (e >= EXTRUDERS)
|
||||
@ -720,7 +720,7 @@ static float analog2temp(int raw, uint8_t e) {
|
||||
return 0.0;
|
||||
}
|
||||
|
||||
#ifdef HEATER_0_USES_MAX6675
|
||||
#if ENABLED(HEATER_0_USES_MAX6675)
|
||||
if (e == 0) return 0.25 * raw;
|
||||
#endif
|
||||
|
||||
@ -750,7 +750,7 @@ static float analog2temp(int raw, uint8_t e) {
|
||||
// Derived from RepRap FiveD extruder::getTemperature()
|
||||
// For bed temperature measurement.
|
||||
static float analog2tempBed(int raw) {
|
||||
#ifdef BED_USES_THERMISTOR
|
||||
#if ENABLED(BED_USES_THERMISTOR)
|
||||
float celsius = 0;
|
||||
byte i;
|
||||
|
||||
@ -778,14 +778,14 @@ static float analog2tempBed(int raw) {
|
||||
/* Called to get the raw values into the the actual temperatures. The raw values are created in interrupt context,
|
||||
and this function is called from normal context as it is too slow to run in interrupts and will block the stepper routine otherwise */
|
||||
static void updateTemperaturesFromRawValues() {
|
||||
#ifdef HEATER_0_USES_MAX6675
|
||||
#if ENABLED(HEATER_0_USES_MAX6675)
|
||||
current_temperature_raw[0] = read_max6675();
|
||||
#endif
|
||||
for (uint8_t e = 0; e < EXTRUDERS; e++) {
|
||||
current_temperature[e] = analog2temp(current_temperature_raw[e], e);
|
||||
}
|
||||
current_temperature_bed = analog2tempBed(current_temperature_bed_raw);
|
||||
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
|
||||
redundant_temperature = analog2temp(redundant_temperature_raw, 1);
|
||||
#endif
|
||||
#if HAS_FILAMENT_SENSOR
|
||||
@ -800,7 +800,7 @@ static void updateTemperaturesFromRawValues() {
|
||||
}
|
||||
|
||||
|
||||
#ifdef FILAMENT_SENSOR
|
||||
#if ENABLED(FILAMENT_SENSOR)
|
||||
|
||||
// Convert raw Filament Width to millimeters
|
||||
float analog2widthFil() {
|
||||
@ -834,11 +834,11 @@ void tp_init() {
|
||||
for (int e = 0; e < EXTRUDERS; e++) {
|
||||
// populate with the first value
|
||||
maxttemp[e] = maxttemp[0];
|
||||
#ifdef PIDTEMP
|
||||
#if ENABLED(PIDTEMP)
|
||||
temp_iState_min[e] = 0.0;
|
||||
temp_iState_max[e] = PID_INTEGRAL_DRIVE_MAX / PID_PARAM(Ki,e);
|
||||
#endif //PIDTEMP
|
||||
#ifdef PIDTEMPBED
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
temp_iState_min_bed = 0.0;
|
||||
temp_iState_max_bed = PID_BED_INTEGRAL_DRIVE_MAX / bedKi;
|
||||
#endif //PIDTEMPBED
|
||||
@ -861,17 +861,17 @@ void tp_init() {
|
||||
#endif
|
||||
#if HAS_FAN
|
||||
SET_OUTPUT(FAN_PIN);
|
||||
#ifdef FAST_PWM_FAN
|
||||
#if ENABLED(FAST_PWM_FAN)
|
||||
setPwmFrequency(FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||
#endif
|
||||
#ifdef FAN_SOFT_PWM
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
soft_pwm_fan = fanSpeedSoftPwm / 2;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef HEATER_0_USES_MAX6675
|
||||
#if ENABLED(HEATER_0_USES_MAX6675)
|
||||
|
||||
#ifndef SDSUPPORT
|
||||
#if DISABLED(SDSUPPORT)
|
||||
OUT_WRITE(SCK_PIN, LOW);
|
||||
OUT_WRITE(MOSI_PIN, HIGH);
|
||||
OUT_WRITE(MISO_PIN, HIGH);
|
||||
@ -1004,7 +1004,7 @@ void tp_init() {
|
||||
#endif //BED_MAXTEMP
|
||||
}
|
||||
|
||||
#ifdef THERMAL_PROTECTION_HOTENDS
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
||||
/**
|
||||
* Start Heating Sanity Check for hotends that are below
|
||||
* their target temperature by a configurable margin.
|
||||
@ -1020,7 +1020,7 @@ void tp_init() {
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(THERMAL_PROTECTION_HOTENDS) || defined(THERMAL_PROTECTION_BED)
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS) || ENABLED(THERMAL_PROTECTION_BED)
|
||||
|
||||
void thermal_runaway_protection(TRState *state, millis_t *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc) {
|
||||
|
||||
@ -1115,7 +1115,7 @@ void disable_all_heaters() {
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifdef HEATER_0_USES_MAX6675
|
||||
#if ENABLED(HEATER_0_USES_MAX6675)
|
||||
#define MAX6675_HEAT_INTERVAL 250u
|
||||
static millis_t next_max6675_ms = 0;
|
||||
int max6675_temp = 2000;
|
||||
@ -1196,11 +1196,11 @@ static unsigned long raw_temp_value[4] = { 0 };
|
||||
static unsigned long raw_temp_bed_value = 0;
|
||||
|
||||
static void set_current_temp_raw() {
|
||||
#if HAS_TEMP_0 && !defined(HEATER_0_USES_MAX6675)
|
||||
#if HAS_TEMP_0 && DISABLED(HEATER_0_USES_MAX6675)
|
||||
current_temperature_raw[0] = raw_temp_value[0];
|
||||
#endif
|
||||
#if HAS_TEMP_1
|
||||
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
|
||||
redundant_temperature_raw = raw_temp_value[1];
|
||||
#else
|
||||
current_temperature_raw[1] = raw_temp_value[1];
|
||||
@ -1230,7 +1230,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
static unsigned char pwm_count = BIT(SOFT_PWM_SCALE);
|
||||
|
||||
// Static members for each heater
|
||||
#ifdef SLOW_PWM_HEATERS
|
||||
#if ENABLED(SLOW_PWM_HEATERS)
|
||||
static unsigned char slow_pwm_count = 0;
|
||||
#define ISR_STATICS(n) \
|
||||
static unsigned char soft_pwm_ ## n; \
|
||||
@ -1242,7 +1242,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
|
||||
// Statics per heater
|
||||
ISR_STATICS(0);
|
||||
#if (EXTRUDERS > 1) || defined(HEATERS_PARALLEL)
|
||||
#if (EXTRUDERS > 1) || ENABLED(HEATERS_PARALLEL)
|
||||
ISR_STATICS(1);
|
||||
#if EXTRUDERS > 2
|
||||
ISR_STATICS(2);
|
||||
@ -1259,7 +1259,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
static unsigned long raw_filwidth_value = 0;
|
||||
#endif
|
||||
|
||||
#ifndef SLOW_PWM_HEATERS
|
||||
#if DISABLED(SLOW_PWM_HEATERS)
|
||||
/**
|
||||
* standard PWM modulation
|
||||
*/
|
||||
@ -1287,7 +1287,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
soft_pwm_BED = soft_pwm_bed;
|
||||
WRITE_HEATER_BED(soft_pwm_BED > 0 ? 1 : 0);
|
||||
#endif
|
||||
#ifdef FAN_SOFT_PWM
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
soft_pwm_fan = fanSpeedSoftPwm / 2;
|
||||
WRITE_FAN(soft_pwm_fan > 0 ? 1 : 0);
|
||||
#endif
|
||||
@ -1308,7 +1308,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
if (soft_pwm_BED < pwm_count) WRITE_HEATER_BED(0);
|
||||
#endif
|
||||
|
||||
#ifdef FAN_SOFT_PWM
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
if (soft_pwm_fan < pwm_count) WRITE_FAN(0);
|
||||
#endif
|
||||
|
||||
@ -1385,7 +1385,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
PWM_OFF_ROUTINE(BED); // BED
|
||||
#endif
|
||||
|
||||
#ifdef FAN_SOFT_PWM
|
||||
#if ENABLED(FAN_SOFT_PWM)
|
||||
if (pwm_count == 0) {
|
||||
soft_pwm_fan = fanSpeedSoftPwm / 2;
|
||||
WRITE_FAN(soft_pwm_fan > 0 ? 1 : 0);
|
||||
@ -1540,7 +1540,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
for (int i = 0; i < 4; i++) raw_temp_value[i] = 0;
|
||||
raw_temp_bed_value = 0;
|
||||
|
||||
#if HAS_TEMP_0 && !defined(HEATER_0_USES_MAX6675)
|
||||
#if HAS_TEMP_0 && DISABLED(HEATER_0_USES_MAX6675)
|
||||
#if HEATER_0_RAW_LO_TEMP > HEATER_0_RAW_HI_TEMP
|
||||
#define GE0 <=
|
||||
#else
|
||||
@ -1592,7 +1592,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
|
||||
} // temp_count >= OVERSAMPLENR
|
||||
|
||||
#ifdef BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
for (uint8_t axis = X_AXIS; axis <= Z_AXIS; axis++) {
|
||||
int curTodo = babystepsTodo[axis]; //get rid of volatile for performance
|
||||
|
||||
@ -1608,7 +1608,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
#endif //BABYSTEPPING
|
||||
}
|
||||
|
||||
#ifdef PIDTEMP
|
||||
#if ENABLED(PIDTEMP)
|
||||
// Apply the scale factors to the PID values
|
||||
float scalePID_i(float i) { return i * PID_dT; }
|
||||
float unscalePID_i(float i) { return i / PID_dT; }
|
||||
|
||||
@ -23,7 +23,7 @@
|
||||
|
||||
#include "Marlin.h"
|
||||
#include "planner.h"
|
||||
#ifdef PID_ADD_EXTRUSION_RATE
|
||||
#if ENABLED(PID_ADD_EXTRUSION_RATE)
|
||||
#include "stepper.h"
|
||||
#endif
|
||||
|
||||
@ -31,7 +31,7 @@
|
||||
void tp_init(); //initialize the heating
|
||||
void manage_heater(); //it is critical that this is called periodically.
|
||||
|
||||
#ifdef FILAMENT_SENSOR
|
||||
#if ENABLED(FILAMENT_SENSOR)
|
||||
// For converting raw Filament Width to milimeters
|
||||
float analog2widthFil();
|
||||
|
||||
@ -43,13 +43,13 @@ void manage_heater(); //it is critical that this is called periodically.
|
||||
// do not use these routines and variables outside of temperature.cpp
|
||||
extern int target_temperature[4];
|
||||
extern float current_temperature[4];
|
||||
#ifdef SHOW_TEMP_ADC_VALUES
|
||||
#if ENABLED(SHOW_TEMP_ADC_VALUES)
|
||||
extern int current_temperature_raw[4];
|
||||
extern int current_temperature_bed_raw;
|
||||
#endif
|
||||
extern int target_temperature_bed;
|
||||
extern float current_temperature_bed;
|
||||
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
|
||||
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
|
||||
extern float redundant_temperature;
|
||||
#endif
|
||||
|
||||
@ -57,9 +57,9 @@ extern float current_temperature_bed;
|
||||
extern unsigned char soft_pwm_bed;
|
||||
#endif
|
||||
|
||||
#ifdef PIDTEMP
|
||||
#if ENABLED(PIDTEMP)
|
||||
|
||||
#ifdef PID_PARAMS_PER_EXTRUDER
|
||||
#if ENABLED(PID_PARAMS_PER_EXTRUDER)
|
||||
extern float Kp[EXTRUDERS], Ki[EXTRUDERS], Kd[EXTRUDERS], Kc[EXTRUDERS]; // one param per extruder
|
||||
#define PID_PARAM(param,e) param[e] // use macro to point to array value
|
||||
#else
|
||||
@ -73,11 +73,11 @@ extern float current_temperature_bed;
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef PIDTEMPBED
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
extern float bedKp,bedKi,bedKd;
|
||||
#endif
|
||||
|
||||
#ifdef BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
extern volatile int babystepsTodo[3];
|
||||
#endif
|
||||
|
||||
@ -88,7 +88,7 @@ extern float current_temperature_bed;
|
||||
FORCE_INLINE float degHotend(uint8_t extruder) { return current_temperature[extruder]; }
|
||||
FORCE_INLINE float degBed() { return current_temperature_bed; }
|
||||
|
||||
#ifdef SHOW_TEMP_ADC_VALUES
|
||||
#if ENABLED(SHOW_TEMP_ADC_VALUES)
|
||||
FORCE_INLINE float rawHotendTemp(uint8_t extruder) { return current_temperature_raw[extruder]; }
|
||||
FORCE_INLINE float rawBedTemp() { return current_temperature_bed_raw; }
|
||||
#endif
|
||||
@ -96,13 +96,13 @@ FORCE_INLINE float degBed() { return current_temperature_bed; }
|
||||
FORCE_INLINE float degTargetHotend(uint8_t extruder) { return target_temperature[extruder]; }
|
||||
FORCE_INLINE float degTargetBed() { return target_temperature_bed; }
|
||||
|
||||
#ifdef THERMAL_PROTECTION_HOTENDS
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
||||
void start_watching_heater(int e=0);
|
||||
#endif
|
||||
|
||||
FORCE_INLINE void setTargetHotend(const float &celsius, uint8_t extruder) {
|
||||
target_temperature[extruder] = celsius;
|
||||
#ifdef THERMAL_PROTECTION_HOTENDS
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
||||
start_watching_heater(extruder);
|
||||
#endif
|
||||
}
|
||||
@ -147,7 +147,7 @@ void setExtruderAutoFanState(int pin, bool state);
|
||||
void checkExtruderAutoFans();
|
||||
|
||||
FORCE_INLINE void autotempShutdown() {
|
||||
#ifdef AUTOTEMP
|
||||
#if ENABLED(AUTOTEMP)
|
||||
if (autotemp_enabled) {
|
||||
autotemp_enabled = false;
|
||||
if (degTargetHotend(active_extruder) > autotemp_min)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user