From 522ea178a4ec0963a00294447c54736b10d3415f Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Sat, 28 Apr 2018 11:24:58 -0500
Subject: [PATCH] Clear up trailing whitespace

---
 Marlin/Marlin_main.cpp | 22 +++++++++++-----------
 Marlin/temperature.h   |  2 +-
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 66d9b5246..3134bdd4e 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -2224,8 +2224,8 @@ void clean_up_after_endstop_or_probe_move() {
         while (thermalManager.isHeatingBed()) safe_delay(200);
         lcd_reset_status();
       }
-    #endif	
-	
+    #endif
+
     // Deploy BLTouch at the start of any probe
     #if ENABLED(BLTOUCH)
       if (set_bltouch_deployed(true)) return true;
@@ -2939,7 +2939,7 @@ static void do_homing_move(const AxisEnum axis, const float distance, const floa
       SERIAL_EOL();
     }
   #endif
-  
+
   #if HOMING_Z_WITH_PROBE && HAS_HEATED_BED && ENABLED(WAIT_FOR_BED_HEATER)
     // Wait for bed to heat back up between probing points
     if (axis == Z_AXIS && distance < 0 && thermalManager.isHeatingBed()) {
@@ -5678,7 +5678,7 @@ void home_all_axes() { gcode_G28(true); }
 
   /**
    * kinematics routines and auto tune matrix scaling parameters:
-   * see https://github.com/LVD-AC/Marlin-AC/tree/1.1.x-AC/documentation for  
+   * see https://github.com/LVD-AC/Marlin-AC/tree/1.1.x-AC/documentation for
    *  - formulae for approximative forward kinematics in the end-stop displacement matrix
    *  - definition of the matrix scaling parameters
    */
@@ -5692,7 +5692,7 @@ void home_all_axes() { gcode_G28(true); }
       pos[Y_AXIS] = sin(a) * r;
       pos[Z_AXIS] = z_pt[rad];
       inverse_kinematics(pos);
-      LOOP_XYZ(axis) mm_at_pt_axis[rad][axis] = delta[axis];           
+      LOOP_XYZ(axis) mm_at_pt_axis[rad][axis] = delta[axis];
     }
   }
 
@@ -5756,7 +5756,7 @@ void home_all_axes() { gcode_G28(true); }
           delta_t[ABC] = {0.0};
 
     delta_r = diff;
-    calc_kinematics_diff_probe_points(z_pt, delta_e, delta_r, delta_t);     
+    calc_kinematics_diff_probe_points(z_pt, delta_e, delta_r, delta_t);
     r_fac = -(z_pt[__A] + z_pt[__B] + z_pt[__C] + z_pt[_BC] + z_pt[_CA] + z_pt[_AB]) / 6.0;
     r_fac = diff / r_fac / 3.0; // 1/(3*delta_Z)
     return r_fac;
@@ -5773,7 +5773,7 @@ void home_all_axes() { gcode_G28(true); }
     LOOP_XYZ(axis) {
       LOOP_XYZ(axis_2) delta_t[axis_2] = 0.0;
       delta_t[axis] = diff;
-      calc_kinematics_diff_probe_points(z_pt, delta_e, delta_r, delta_t);     
+      calc_kinematics_diff_probe_points(z_pt, delta_e, delta_r, delta_t);
       a_fac += z_pt[uint8_t((axis * _4P_STEP) - _7P_STEP + NPP) % NPP + 1] / 6.0;
       a_fac -= z_pt[uint8_t((axis * _4P_STEP) + 1 + _7P_STEP)] / 6.0;
     }
@@ -5955,7 +5955,7 @@ void home_all_axes() { gcode_G28(true); }
 
         /**
          * convergence matrices:
-         * see https://github.com/LVD-AC/Marlin-AC/tree/1.1.x-AC/documentation for  
+         * see https://github.com/LVD-AC/Marlin-AC/tree/1.1.x-AC/documentation for
          *  - definition of the matrix scaling parameters
          *  - matrices for 4 and 7 point calibration
          */
@@ -6021,7 +6021,7 @@ void home_all_axes() { gcode_G28(true); }
         delta_radius += r_delta;
         LOOP_XYZ(axis) delta_tower_angle_trim[axis] += t_delta[axis];
       }
-      else if (zero_std_dev >= test_precision) {   
+      else if (zero_std_dev >= test_precision) {
         // roll back
         COPY(delta_endstop_adj, e_old);
         delta_radius = r_old;
@@ -6047,7 +6047,7 @@ void home_all_axes() { gcode_G28(true); }
       NOMORE(zero_std_dev_min, zero_std_dev);
 
       // print report
-  
+
       if (verbose_level == 3)
         print_calibration_results(z_at_pt, _tower_results, _opposite_results);
 
@@ -12423,7 +12423,7 @@ void process_parsed_command() {
       #endif
 
       case 999: gcode_M999(); break;                              // M999: Restart after being Stopped
-      
+
       default: parser.unknown_command_error();
     }
     break;
diff --git a/Marlin/temperature.h b/Marlin/temperature.h
index 128007a83..8d1754565 100644
--- a/Marlin/temperature.h
+++ b/Marlin/temperature.h
@@ -196,7 +196,7 @@ class Temperature {
     FORCE_INLINE static bool hotEnoughToExtrude(const uint8_t e) { return !tooColdToExtrude(e); }
     FORCE_INLINE static bool targetHotEnoughToExtrude(const uint8_t e) { return !targetTooColdToExtrude(e); }
 
-  private: 
+  private:
 
     static volatile bool temp_meas_ready;
     static uint16_t raw_temp_value[MAX_EXTRUDERS];