MPCNC
/
Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fix MarlinSerial (#10992)

This commit is contained in:
Scott Lahteine 2018-06-10 20:04:52 -05:00 committed by GitHub
parent 38f73d57bc
commit 53730be606
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 89 additions and 73 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

162
Marlin/MarlinSerial.cpp
View File

@ -28,6 +28,7 @@
* Modified 28 September 2010 by Mark Sproul
* Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
* Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF)
* Modified 10 June 2018 by Eduardo José Tagle (See #10991)
*/
// Disable HardwareSerial.cpp to support chips without a UART (Attiny, etc.)
@ -90,13 +91,78 @@
#include "emergency_parser.h"
#endif
// "Atomically" read the RX head index value without disabling interrupts:
// This MUST be called with RX interrupts enabled, and CAN'T be called
// from the RX ISR itself!
FORCE_INLINE ring_buffer_pos_t atomic_read_rx_head() {
#if RX_BUFFER_SIZE > 256
// Keep reading until 2 consecutive reads return the same value,
// meaning there was no update in-between caused by an interrupt.
// This works because serial RX interrupts happen at a slower rate
// than successive reads of a variable, so 2 consecutive reads with
// the same value means no interrupt updated it.
ring_buffer_pos_t vold, vnew = rx_buffer.head;
sw_barrier();
do {
vold = vnew;
vnew = rx_buffer.head;
sw_barrier();
} while (vold != vnew);
return vnew;
#else
// With an 8bit index, reads are always atomic. No need for special handling
return rx_buffer.head;
#endif
}
#if RX_BUFFER_SIZE > 256
static volatile bool rx_tail_value_not_stable = false;
static volatile uint16_t rx_tail_value_backup = 0;
#endif
// Set RX tail index, taking into account the RX ISR could interrupt
// the write to this variable in the middle - So a backup strategy
// is used to ensure reads of the correct values.
// -Must NOT be called from the RX ISR -
FORCE_INLINE void atomic_set_rx_tail(ring_buffer_pos_t value) {
#if RX_BUFFER_SIZE > 256
// Store the new value in the backup
rx_tail_value_backup = value;
sw_barrier();
// Flag we are about to change the true value
rx_tail_value_not_stable = true;
sw_barrier();
// Store the new value
rx_buffer.tail = value;
sw_barrier();
// Signal the new value is completely stored into the value
rx_tail_value_not_stable = false;
sw_barrier();
#else
rx_buffer.tail = value;
#endif
}
// Get the RX tail index, taking into account the read could be
// interrupting in the middle of the update of that index value
// -Called from the RX ISR -
FORCE_INLINE ring_buffer_pos_t atomic_read_rx_tail() {
#if RX_BUFFER_SIZE > 256
// If the true index is being modified, return the backup value
if (rx_tail_value_not_stable) return rx_tail_value_backup;
#endif
// The true index is stable, return it
return rx_buffer.tail;
}
// (called with RX interrupts disabled)
FORCE_INLINE void store_rxd_char() {
// Get the tail - Nothing can alter its value while this ISR is executing, but there's
// a chance that this ISR interrupted the main process while it was updating the index.
// The backup mechanism ensures the correct value is always returned.
const ring_buffer_pos_t t = atomic_read_rx_tail();
// Get the tail - Nothing can alter its value while we are at this ISR
const ring_buffer_pos_t t = rx_buffer.tail;
// Get the head pointer
// Get the head pointer - This ISR is the only one that modifies its value, so it's safe to read here
ring_buffer_pos_t h = rx_buffer.head;
// Get the next element
@ -153,7 +219,7 @@
// and stop sending bytes. This translates to 13mS propagation time.
if (rx_count >= (RX_BUFFER_SIZE) / 8) {
// At this point, definitely no TX interrupt was executing, since the TX isr can't be preempted.
// At this point, definitely no TX interrupt was executing, since the TX ISR can't be preempted.
// Don't enable the TX interrupt here as a means to trigger the XOFF char, because if it happens
// to be in the middle of trying to disable the RX interrupt in the main program, eventually the
// enabling of the TX interrupt could be undone. The ONLY reliable thing this can do to ensure
@ -241,7 +307,7 @@
}
#endif // SERIAL_XON_XOFF
// Store the new head value
// Store the new head value - The main loop will retry until the value is stable
rx_buffer.head = h;
}
@ -351,37 +417,14 @@
}
int MarlinSerial::peek(void) {
#if RX_BUFFER_SIZE > 256
// Disable RX interrupts, but only if non atomic reads
const bool isr_enabled = TEST(M_UCSRxB, M_RXCIEx);
CBI(M_UCSRxB, M_RXCIEx);
#endif
const int v = rx_buffer.head == rx_buffer.tail ? -1 : rx_buffer.buffer[rx_buffer.tail];
#if RX_BUFFER_SIZE > 256
// Reenable RX interrupts if they were enabled
if (isr_enabled) SBI(M_UCSRxB, M_RXCIEx);
#endif
return v;
const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
return h == t ? -1 : rx_buffer.buffer[t];
}
int MarlinSerial::read(void) {
const ring_buffer_pos_t h = atomic_read_rx_head();
#if RX_BUFFER_SIZE > 256
// Disable RX interrupts to ensure atomic reads - This could reenable TX interrupts,
// but this situation is explicitly handled at the TX isr, so no problems there
bool isr_enabled = TEST(M_UCSRxB, M_RXCIEx);
CBI(M_UCSRxB, M_RXCIEx);
#endif
const ring_buffer_pos_t h = rx_buffer.head;
#if RX_BUFFER_SIZE > 256
// End critical section
if (isr_enabled) SBI(M_UCSRxB, M_RXCIEx);
#endif
// Read the tail. Main thread owns it, so it is safe to directly read it
ring_buffer_pos_t t = rx_buffer.tail;
// If nothing to read, return now
@ -391,22 +434,9 @@
const int v = rx_buffer.buffer[t];
t = (ring_buffer_pos_t)(t + 1) & (RX_BUFFER_SIZE - 1);
#if RX_BUFFER_SIZE > 256
// Disable RX interrupts to ensure atomic write to tail, so
// the RX isr can't read partially updated values - This could
// reenable TX interrupts, but this situation is explicitly
// handled at the TX isr, so no problems there
isr_enabled = TEST(M_UCSRxB, M_RXCIEx);
CBI(M_UCSRxB, M_RXCIEx);
#endif
// Advance tail
rx_buffer.tail = t;
#if RX_BUFFER_SIZE > 256
// End critical section
if (isr_enabled) SBI(M_UCSRxB, M_RXCIEx);
#endif
// Advance tail - Making sure the RX ISR will always get an stable value, even
// if it interrupts the writing of the value of that variable in the middle.
atomic_set_rx_tail(t);
#if ENABLED(SERIAL_XON_XOFF)
// If the XOFF char was sent, or about to be sent...
@ -417,7 +447,7 @@
#if TX_BUFFER_SIZE > 0
// Signal we want an XON character to be sent.
xon_xoff_state = XON_CHAR;
// Enable TX isr. Non atomic, but it will eventually enable them
// Enable TX ISR. Non atomic, but it will eventually enable them
SBI(M_UCSRxB, M_UDRIEx);
#else
// If not using TX interrupts, we must send the XON char now
@ -433,31 +463,17 @@
}
ring_buffer_pos_t MarlinSerial::available(void) {
#if RX_BUFFER_SIZE > 256
const bool isr_enabled = TEST(M_UCSRxB, M_RXCIEx);
CBI(M_UCSRxB, M_RXCIEx);
#endif
const ring_buffer_pos_t h = rx_buffer.head, t = rx_buffer.tail;
#if RX_BUFFER_SIZE > 256
if (isr_enabled) SBI(M_UCSRxB, M_RXCIEx);
#endif
const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
return (ring_buffer_pos_t)(RX_BUFFER_SIZE + h - t) & (RX_BUFFER_SIZE - 1);
}
void MarlinSerial::flush(void) {
#if RX_BUFFER_SIZE > 256
const bool isr_enabled = TEST(M_UCSRxB, M_RXCIEx);
CBI(M_UCSRxB, M_RXCIEx);
#endif
rx_buffer.tail = rx_buffer.head;
#if RX_BUFFER_SIZE > 256
if (isr_enabled) SBI(M_UCSRxB, M_RXCIEx);
#endif
// Set the tail to the head:
// - Read the RX head index in a safe way. (See atomic_read_rx_head.)
// - Set the tail, making sure the RX ISR will always get a stable value, even
// if it interrupts the writing of the value of that variable in the middle.
atomic_set_rx_tail(atomic_read_rx_head());
#if ENABLED(SERIAL_XON_XOFF)
// If the XOFF char was sent, or about to be sent...
@ -465,7 +481,7 @@
#if TX_BUFFER_SIZE > 0
// Signal we want an XON character to be sent.
xon_xoff_state = XON_CHAR;
// Enable TX isr. Non atomic, but it will eventually enable it.
// Enable TX ISR. Non atomic, but it will eventually enable it.
SBI(M_UCSRxB, M_UDRIEx);
#else
// If not using TX interrupts, we must send the XON char now
@ -487,7 +503,7 @@
// effective datarate at high (>500kbit/s) bitrates, where
// interrupt overhead becomes a slowdown.
// Yes, there is a race condition between the sending of the
// XOFF char at the RX isr, but it is properly handled there
// XOFF char at the RX ISR, but it is properly handled there
if (!TEST(M_UCSRxB, M_UDRIEx) && TEST(M_UCSRxA, M_UDREx)) {
M_UDRx = c;
@ -522,7 +538,7 @@
tx_buffer.buffer[tx_buffer.head] = c;
tx_buffer.head = i;
// Enable TX isr - Non atomic, but it will eventually enable TX isr
// Enable TX ISR - Non atomic, but it will eventually enable TX ISR
SBI(M_UCSRxB, M_UDRIEx);
}