From e86f2342c057cdc624a07a11ed26bb653c790bda Mon Sep 17 00:00:00 2001
From: Jonathan Bastien-Filiatrault <joe@x2a.org>
Date: Thu, 28 May 2015 11:30:56 -0400
Subject: [PATCH 1/2] Separate the maximum integral power for the bed from
 PID_INTEGRAL_DRIVE_MAX / PID_MAX.

My PID_INTEGRAL_DRIVE_MAX was at 96, which was insufficient for my bed
to reach its intended temperature. The head requires a low maximum power since
I run on 24 volts and it has a somewhat low thermal mass.
---
 Marlin/Configuration.h | 2 ++
 Marlin/temperature.cpp | 4 ++--
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index d9d9aa8b2..32a0a888d 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -243,6 +243,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp
index 356c0057c..d55ebffd9 100644
--- a/Marlin/temperature.cpp
+++ b/Marlin/temperature.cpp
@@ -361,7 +361,7 @@ void updatePID() {
     }
   #endif
   #ifdef PIDTEMPBED
-    temp_iState_max_bed = PID_INTEGRAL_DRIVE_MAX / bedKi;
+    temp_iState_max_bed = PID_BED_INTEGRAL_DRIVE_MAX / bedKi;
   #endif
 }
 
@@ -844,7 +844,7 @@ void tp_init() {
     #endif //PIDTEMP
     #ifdef PIDTEMPBED
       temp_iState_min_bed = 0.0;
-      temp_iState_max_bed = PID_INTEGRAL_DRIVE_MAX / bedKi;
+      temp_iState_max_bed = PID_BED_INTEGRAL_DRIVE_MAX / bedKi;
     #endif //PIDTEMPBED
   }
 

From d46d9d998ee7205f29a94c3d3ee191088d4219b6 Mon Sep 17 00:00:00 2001
From: Jonathan Bastien-Filiatrault <joe@x2a.org>
Date: Thu, 28 May 2015 12:51:37 -0400
Subject: [PATCH 2/2] Add maximum bed integral term in example configurations.

---
 Marlin/example_configurations/Felix/Configuration.h             | 2 ++
 Marlin/example_configurations/Hephestos/Configuration.h         | 2 ++
 Marlin/example_configurations/K8200/Configuration.h             | 2 ++
 .../RepRapWorld/Megatronics/Configuration.h                     | 2 ++
 Marlin/example_configurations/SCARA/Configuration.h             | 2 ++
 Marlin/example_configurations/WITBOX/Configuration.h            | 2 ++
 Marlin/example_configurations/delta/biv2.5/Configuration.h      | 2 ++
 Marlin/example_configurations/delta/generic/Configuration.h     | 2 ++
 Marlin/example_configurations/delta/kossel_mini/Configuration.h | 2 ++
 Marlin/example_configurations/delta/kossel_pro/Configuration.h  | 2 ++
 Marlin/example_configurations/makibox/Configuration.h           | 2 ++
 Marlin/example_configurations/tvrrug/Round2/Configuration.h     | 2 ++
 12 files changed, 24 insertions(+)

diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 5352bc5e1..d78417ad5 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -217,6 +217,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 // Felix Foil Heater
    #define DEFAULT_bedKp 103.37
    #define DEFAULT_bedKi 2.79
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 0b437d107..bef71478c 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -234,6 +234,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 6061e739f..30ad8de68 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -253,6 +253,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
 //    #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index b98c72437..5ca7d9fe2 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -243,6 +243,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 1d85ac56c..d2ccce867 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -256,6 +256,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
 //    #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 53ce0bad3..20eae4e90 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -233,6 +233,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index f86b2da38..8c3356fe0 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -260,6 +260,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index 4820f5890..34019e999 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -260,6 +260,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index cf8cd0b9d..4724611a0 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -260,6 +260,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 3472a46e9..ca609f8eb 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -256,6 +256,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //Kossel Pro heated bed plate with borosilicate glass
 //from pidautotune (M303 E-1 S60 C8)
     #define  DEFAULT_bedKp 370.25
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index a5f04cf48..e73cebe9c 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -230,6 +230,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 92ed23f2f..33496aa73 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -232,6 +232,8 @@ Here are some standard links for getting your machine calibrated:
 //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
 #ifdef PIDTEMPBED
+    #define PID_BED_INTEGRAL_DRIVE_MAX MAX_BED_POWER //limit for the integral term
+
 //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
 //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
     #define  DEFAULT_bedKp 10.00