MPCNC
/
Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Allow FAN_PIN override, pins cleanup (#10957)

This commit is contained in:
Scott Lahteine 2018-06-07 16:39:11 -05:00 committed by GitHub
parent 70d39ac185
commit 582845fd72
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
43 changed files with 292 additions and 221 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/pins_5DPRINT.h
View File

@ -132,7 +132,9 @@
#define HEATER_0_PIN 15 // C5
#define HEATER_BED_PIN 14 // C4
#define FAN_PIN 16 // C6 PWM3A
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 PWM3A
#endif
//
// Misc. Functions

5
Marlin/pins_ANET_10.h
View File

@ -133,7 +133,10 @@
//
#define HEATER_0_PIN 13 // (extruder)
#define HEATER_BED_PIN 12 // (bed)
#define FAN_PIN 4
#ifndef FAN_PIN
#define FAN_PIN 4
#endif
//
// Misc. Functions

26
Marlin/pins_AZTEEG_X3_PRO.h
View File

@ -24,22 +24,29 @@
* AZTEEG_X3_PRO (Arduino Mega) pin assignments
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
#endif
#if HOTENDS > 5 || E_STEPPERS > 5
#error "Azteeg X3 Pro supports up to 5 hotends / E-steppers. Comment out this line to continue."
#endif
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT)
#define CASE_LIGHT_PIN 44 // Define before RAMPS pins include
#endif
#define BOARD_NAME "Azteeg X3 Pro"
#include "pins_RAMPS.h"
#ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
//
// RAMPS pins overrides
//
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT)
#define CASE_LIGHT_PIN 44
#endif
#ifndef FAN_PIN
#define FAN_PIN 6
#endif
#include "pins_RAMPS.h"
// DIGIPOT slave addresses
#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1)
#define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1)
@ -116,9 +123,6 @@
#define HEATER_6_PIN 6
#define HEATER_7_PIN 11
#undef FAN_PIN
#define FAN_PIN 6 // Part Cooling System
#ifndef CONTROLLER_FAN_PIN
#define CONTROLLER_FAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable)
#endif

4
Marlin/pins_BRAINWAVE.h
View File

@ -115,7 +115,9 @@
#define HEATER_0_PIN 32 // A4 Extruder
#define HEATER_BED_PIN 18 // E6 Bed
#define FAN_PIN 31 // A3 Fan
#ifndef FAN_PIN
#define FAN_PIN 31 // A3 Fan
#endif
//
// Misc. Functions

4
Marlin/pins_BRAINWAVE_PRO.h
View File

@ -125,7 +125,9 @@
//
#define HEATER_0_PIN 27 // B7
#define HEATER_BED_PIN 26 // B6 Bed
#define FAN_PIN 16 // C6 Fan, PWM3A
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 Fan, PWM3A
#endif
//
// Misc. Functions

4
Marlin/pins_CHEAPTRONIC.h
View File

@ -69,8 +69,8 @@
//
// Heaters / Fans
//
#define HEATER_0_PIN 19 // EXTRUDER 1
#define HEATER_1_PIN 23 // EXTRUDER 2
#define HEATER_0_PIN 19 // EXTRUDER 1
#define HEATER_1_PIN 23 // EXTRUDER 2
#define HEATER_BED_PIN 22
//

51
Marlin/pins_CHEAPTRONICv2.h
View File

@ -31,6 +31,7 @@
#endif
#define BOARD_NAME "Cheaptronic v2.0"
//
// Limit Switches
//
@ -80,10 +81,32 @@
//
// Heaters / Fans
//
#define HEATER_0_PIN 6
#define HEATER_1_PIN 7
#define HEATER_2_PIN 8
#define HEATER_BED_PIN 9
#define HEATER_0_PIN 6
#define HEATER_1_PIN 7
#define HEATER_2_PIN 8
#define HEATER_BED_PIN 9
#ifndef FAN_PIN
#define FAN_PIN 3
#endif
#define FAN2_PIN 58 // additional fan or light control output
//
// Other board specific pins
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 37 // board input labeled as F-DET
#endif
#define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe)
#define LED_PIN 13
#define SPINDLE_ENABLE_PIN 4 // additional PWM pin 1 at JP1 connector - should be used for laser control too
#define EXT_2 5 // additional PWM pin 2 at JP1 connector
#define EXT_3 2 // additional PWM pin 3 at JP1 connector
#define PS_ON_PIN 45
#define KILL_PIN 46
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 11 // shared with TEMP_3 analog input
#endif
//
// LCD
@ -105,23 +128,3 @@
#define BTN_EN1 11
#define BTN_EN2 12
#define BTN_ENC 43
//
// Other board specific pins
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 37 // board input labeled as F-DET
#endif
#define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe)
#define LED_PIN 13
#define SPINDLE_ENABLE_PIN 4 // additional PWM pin 1 at JP1 connector - should be used for laser control too
#define EXT_2 5 // additional PWM pin 2 at JP1 connector
#define EXT_3 2 // additional PWM pin 3 at JP1 connector
#define FAN_PIN 3
#define FAN2_PIN 58 // additional fan or light control output
#define PS_ON_PIN 45
#define KILL_PIN 46
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 11 // shared with TEMP_3 analog input
#endif

4
Marlin/pins_CNCONTROLS_11.h
View File

@ -65,7 +65,9 @@
#define HEATER_3_PIN 46
#define HEATER_BED_PIN 2
//#define FAN_PIN 7 // common PWM pin for all tools
#ifndef FAN_PIN
//#define FAN_PIN 7 // common PWM pin for all tools
#endif
#define ORIG_E0_AUTO_FAN_PIN 7
#define ORIG_E1_AUTO_FAN_PIN 7

6
Marlin/pins_CNCONTROLS_12.h
View File

@ -65,7 +65,9 @@
#define HEATER_3_PIN 3
#define HEATER_BED_PIN 24
#define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
#ifndef FAN_PIN
#define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
#endif
#define ORIG_E0_AUTO_FAN_PIN 7
#define ORIG_E1_AUTO_FAN_PIN 7
@ -124,4 +126,4 @@
//#define UI2 37
#define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED_PIN 10 // TOOL_0_PWM_PIN
#define STAT_LED_RED_PIN 10 // TOOL_0_PWM_PIN

4
Marlin/pins_EINSY_RAMBO.h
View File

@ -117,7 +117,9 @@
#define HEATER_0_PIN 3
#define HEATER_BED_PIN 4
#define FAN_PIN 8
#ifndef FAN_PIN
#define FAN_PIN 8
#endif
#define FAN1_PIN 6
//

4
Marlin/pins_EINSY_RETRO.h
View File

@ -134,7 +134,9 @@
#define HEATER_0_PIN 3
#define HEATER_BED_PIN 4
#define FAN_PIN 8
#ifndef FAN_PIN
#define FAN_PIN 8
#endif
#define FAN1_PIN 6
//

4
Marlin/pins_ELEFU_3.h
View File

@ -90,7 +90,9 @@
#define HEATER_2_PIN 17 // 12V PWM3
#define HEATER_BED_PIN 44 // DOUBLE 12V PWM
#define FAN_PIN 16 // 5V PWM
#ifndef FAN_PIN
#define FAN_PIN 16 // 5V PWM
#endif
//
// Misc. Functions

7
Marlin/pins_GEN3_MONOLITHIC.h
View File

@ -68,11 +68,11 @@
//
#define X_STEP_PIN 15
#define X_DIR_PIN 18
#define X_ENABLE_PIN 24 // actually uses Y_enable_pin
#define X_ENABLE_PIN 24 // actually uses Y_enable_pin
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24 // shared with X_enable_pin
#define Y_ENABLE_PIN 24 // shared with X_enable_pin
#define Z_STEP_PIN 27
#define Z_DIR_PIN 28
@ -95,7 +95,6 @@
//
// Misc. Functions
//
#define PS_ON_PIN 14 // Alex, does this work on the card?
#define PS_ON_PIN 14 // Alex, does this work on the card?
// Alex extras from Gen3+

4
Marlin/pins_GEN7_12.h
View File

@ -112,8 +112,8 @@
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 3
#if GEN7_VERSION < 13 // Gen7 v1.3 removed the fan pin
#define FAN_PIN 31
#if !defined(FAN_PIN) && GEN7_VERSION < 13 // Gen7 v1.3 removed the fan pin
#define FAN_PIN 31
#endif
//

4
Marlin/pins_GT2560_REV_A.h
View File

@ -81,7 +81,9 @@
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#define FAN_PIN 7
#ifndef FAN_PIN
#define FAN_PIN 7
#endif
//
// Misc. Functions

28
Marlin/pins_LEAPFROG.h
View File

@ -47,21 +47,21 @@
#define X_DIR_PIN 63
#define X_ENABLE_PIN 29
#define Y_STEP_PIN 14 // A6
#define Y_DIR_PIN 15 // A0
#define Y_STEP_PIN 14 // A6
#define Y_DIR_PIN 15 // A0
#define Y_ENABLE_PIN 39
#define Z_STEP_PIN 31 // A2
#define Z_DIR_PIN 32 // A6
#define Z_ENABLE_PIN 30 // A1
#define Z_STEP_PIN 31 // A2
#define Z_DIR_PIN 32 // A6
#define Z_ENABLE_PIN 30 // A1
#define E0_STEP_PIN 34 // 34
#define E0_DIR_PIN 35 // 35
#define E0_ENABLE_PIN 33 // 33
#define E0_STEP_PIN 34 // 34
#define E0_DIR_PIN 35 // 35
#define E0_ENABLE_PIN 33 // 33
#define E1_STEP_PIN 37 // 37
#define E1_DIR_PIN 40 // 40
#define E1_ENABLE_PIN 36 // 36
#define E1_STEP_PIN 37 // 37
#define E1_DIR_PIN 40 // 40
#define E1_ENABLE_PIN 36 // 36
//
// Temperature Sensors
@ -74,9 +74,9 @@
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 8 // 12
#define HEATER_2_PIN 11 // 13
#define HEATER_BED_PIN 10 // 14/15
#define HEATER_1_PIN 8 // 12
#define HEATER_2_PIN 11 // 13
#define HEATER_BED_PIN 10 // 14/15
#define FAN_PIN 7

22
Marlin/pins_MEGACONTROLLER.h
View File

@ -62,17 +62,17 @@
//
// Steppers
//
#define X_STEP_PIN 62 // A8
#define X_DIR_PIN 63 // A9
#define X_ENABLE_PIN 61 // A7
#define X_STEP_PIN 62 // A8
#define X_DIR_PIN 63 // A9
#define X_ENABLE_PIN 61 // A7
#define Y_STEP_PIN 65 // A11
#define Y_DIR_PIN 66 // A12
#define Y_ENABLE_PIN 64 // A10
#define Y_STEP_PIN 65 // A11
#define Y_DIR_PIN 66 // A12
#define Y_ENABLE_PIN 64 // A10
#define Z_STEP_PIN 68 // A14
#define Z_DIR_PIN 69 // A15
#define Z_ENABLE_PIN 67 // A13
#define Z_STEP_PIN 68 // A14
#define Z_DIR_PIN 69 // A15
#define Z_ENABLE_PIN 67 // A13
#define E0_STEP_PIN 23
#define E0_DIR_PIN 24
@ -112,7 +112,9 @@
#define HEATER_1_PIN 34
#define HEATER_BED_PIN 28
#define FAN_PIN 39
#ifndef FAN_PIN
#define FAN_PIN 39
#endif
#define FAN1_PIN 35
#define FAN2_PIN 36

14
Marlin/pins_MEGATRONICS.h
View File

@ -53,13 +53,13 @@
#define X_DIR_PIN 28
#define X_ENABLE_PIN 24
#define Y_STEP_PIN 60 // A6
#define Y_DIR_PIN 61 // A7
#define Y_STEP_PIN 60 // A6
#define Y_DIR_PIN 61 // A7
#define Y_ENABLE_PIN 22
#define Z_STEP_PIN 54 // A0
#define Z_DIR_PIN 55 // A1
#define Z_ENABLE_PIN 56 // A2
#define Z_STEP_PIN 54 // A0
#define Z_DIR_PIN 55 // A1
#define Z_ENABLE_PIN 56 // A2
#define E0_STEP_PIN 31
#define E0_DIR_PIN 32
@ -87,7 +87,9 @@
#define HEATER_1_PIN 8
#define HEATER_BED_PIN 10
#define FAN_PIN 7 // IO pin. Buffer needed
#ifndef FAN_PIN
#define FAN_PIN 7 // IO pin. Buffer needed
#endif
//
// Misc. Functions

4
Marlin/pins_MEGATRONICS_2.h
View File

@ -101,7 +101,9 @@
#define HEATER_1_PIN 8
#define HEATER_BED_PIN 10
#define FAN_PIN 7
#ifndef FAN_PIN
#define FAN_PIN 7
#endif
#define FAN1_PIN 6
//

4
Marlin/pins_MEGATRONICS_3.h
View File

@ -118,7 +118,9 @@
#define HEATER_2_PIN 8
#define HEATER_BED_PIN 10
#define FAN_PIN 6
#ifndef FAN_PIN
#define FAN_PIN 6
#endif
#define FAN1_PIN 7
//

107
Marlin/pins_MIGHTYBOARD_REVE.h
View File

@ -134,14 +134,14 @@
// 2 E4 CS2
// 78 E2 SCK
//
#define THERMO_SCK_PIN 78 // E2
#define THERMO_DO_PIN 3 // E5
#define THERMO_CS1 5 // E3
#define THERMO_CS2 2 // E4
#define THERMO_SCK_PIN 78 // E2
#define THERMO_DO_PIN 3 // E5
#define THERMO_CS1 5 // E3
#define THERMO_CS2 2 // E4
#define MAX6675_SS THERMO_CS1
#define MAX6675_SCK_PIN THERMO_SCK_PIN
#define MAX6675_DO_PIN THERMO_DO_PIN
#define MAX6675_SS THERMO_CS1
#define MAX6675_SCK_PIN THERMO_SCK_PIN
#define MAX6675_DO_PIN THERMO_DO_PIN
//
// Augmentation for auto-assigning plugs
//
@ -149,10 +149,10 @@
// 2 extruders or 1 extruder and a heated bed.
// With no heated bed, an additional 24V fan is possible.
//
#define MOSFET_A_PIN 6 // H3
#define MOSFET_B_PIN 11 // B5 - Rev A of this file had this pin assigned to 9
#define MOSFET_C_PIN 45 // L4
#define MOSFET_D_PIN 44 // L5
#define MOSFET_A_PIN 6 // H3
#define MOSFET_B_PIN 11 // B5 - Rev A of this file had this pin assigned to 9
#define MOSFET_C_PIN 45 // L4
#define MOSFET_D_PIN 44 // L5
#if HOTENDS > 1
#if TEMP_SENSOR_BED
@ -172,23 +172,24 @@
#define HEATER_0_PIN MOSFET_A_PIN
#if ENABLED(IS_EFB) // Hotend, Fan, Bed
#define FAN_PIN MOSFET_B_PIN
#define HEATER_BED_PIN MOSFET_C_PIN
#define HEATER_BED_PIN MOSFET_C_PIN
#elif ENABLED(IS_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN MOSFET_B_PIN
#define FAN_PIN MOSFET_C_PIN
#define HEATER_1_PIN MOSFET_B_PIN
#elif ENABLED(IS_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN MOSFET_B_PIN
#define HEATER_BED_PIN MOSFET_C_PIN
#define HEATER_1_PIN MOSFET_B_PIN
#define HEATER_BED_PIN MOSFET_C_PIN
#elif ENABLED(IS_EFF) // Hotend, Fan, Fan
#define FAN_PIN MOSFET_B_PIN
#define FAN1_PIN MOSFET_C_PIN
#elif ENABLED(IS_SF) // Spindle, Fan
#define FAN_PIN MOSFET_C_PIN
#define FAN1_PIN MOSFET_C_PIN
#endif
#ifndef FAN_PIN
#define FAN_PIN MOSFET_D_PIN
#if ENABLED(IS_EFB) || ENABLED(IS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
#define FAN_PIN MOSFET_B_PIN
#elif ENABLED(IS_EEF) || ENABLED(IS_SF) // Hotend, Hotend, Fan or Spindle, Fan
#define FAN_PIN MOSFET_C_PIN
#else
#define FAN_PIN MOSFET_D_PIN
#endif
#endif
//
@ -200,37 +201,37 @@
//
// Misc. Functions
//
#define LED_PIN 13 // B7
#define CUTOFF_RESET_PIN 16 // H1
#define CUTOFF_TEST_PIN 17 // H0
#define CASE_LIGHT_PIN 44 // L5 MUST BE HARDWARE PWM
#define LED_PIN 13 // B7
#define CUTOFF_RESET_PIN 16 // H1
#define CUTOFF_TEST_PIN 17 // H0
#define CASE_LIGHT_PIN 44 // L5 MUST BE HARDWARE PWM
//
// LCD / Controller
//
#ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#define LCD_PINS_RS 33 // C4: LCD-STROBE
#define LCD_PINS_ENABLE 72 // J2: LEFT
#define LCD_PINS_D4 35 // C2: LCD-CLK
#define LCD_PINS_D5 32 // C5: RLED
#define LCD_PINS_D6 34 // C3: LCD-DATA
#define LCD_PINS_D7 31 // C6: GLED
#define LCD_PINS_RS 33 // C4: LCD-STROBE
#define LCD_PINS_ENABLE 72 // J2: LEFT
#define LCD_PINS_D4 35 // C2: LCD-CLK
#define LCD_PINS_D5 32 // C5: RLED
#define LCD_PINS_D6 34 // C3: LCD-DATA
#define LCD_PINS_D7 31 // C6: GLED
#define BTN_EN2 75 // J4, UP
#define BTN_EN1 73 // J3, DOWN
#define BTN_EN2 75 // J4, UP
#define BTN_EN1 73 // J3, DOWN
//STOP button connected as KILL_PIN
#define KILL_PIN 14 // J1, RIGHT
#define KILL_PIN 14 // J1, RIGHT
//KILL - not connected
#define BEEPER_PIN 8 // H5, SD_WP
#define BEEPER_PIN 8 // H5, SD_WP
#define BTN_CENTER 15 // J0
#define BTN_ENC BTN_CENTER
#define BTN_CENTER 15 // J0
#define BTN_ENC BTN_CENTER
//on board leds
#define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2)
#define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3)
#define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2)
#define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3)
#else
// Replicator uses a 3-wire SR controller with HD44780
@ -238,18 +239,18 @@
//
#define SAV_3DLCD
#define SR_DATA_PIN 34 // C3
#define SR_CLK_PIN 35 // C2
#define SR_STROBE_PIN 33 // C4
#define SR_DATA_PIN 34 // C3
#define SR_CLK_PIN 35 // C2
#define SR_STROBE_PIN 33 // C4
#define BTN_UP 75 // J4
#define BTN_DOWN 73 // J3
#define BTN_LEFT 72 // J2
#define BTN_RIGHT 14 // J1
#define BTN_CENTER 15 // J0
#define BTN_ENC BTN_CENTER
#define BTN_UP 75 // J4
#define BTN_DOWN 73 // J3
#define BTN_LEFT 72 // J2
#define BTN_RIGHT 14 // J1
#define BTN_CENTER 15 // J0
#define BTN_ENC BTN_CENTER
#define BEEPER_PIN 4 // G5
#define BEEPER_PIN 4 // G5
#define STAT_LED_RED_PIN 32 // C5
#define STAT_LED_BLUE_PIN 31 // C6 (Actually green)
@ -259,8 +260,8 @@
//
// SD Card
//
#define SDSS 53 // B0
#define SD_DETECT_PIN 9 // H6
#define SDSS 53 // B0
#define SD_DETECT_PIN 9 // H6
#define MAX_PIN THERMO_SCK_PIN
@ -272,8 +273,6 @@
#define SPINDLE_DIR_PIN 67 // K5
// Check if all pins are defined in mega/pins_arduino.h
#include <Arduino.h>
static_assert(NUM_DIGITAL_PINS > MAX_PIN, "add missing pins to [arduino dir]/hardware/arduino/avr/variants/mega/pins_arduino.h based on fastio.h"

4
Marlin/pins_MINIRAMBO.h
View File

@ -106,7 +106,9 @@
#endif
#define HEATER_BED_PIN 4
#define FAN_PIN 8
#ifndef FAN_PIN
#define FAN_PIN 8
#endif
#define FAN1_PIN 6
//

22
Marlin/pins_MINITRONICS.h
View File

@ -57,13 +57,13 @@
#define X_DIR_PIN 47
#define X_ENABLE_PIN 49
#define Y_STEP_PIN 39 // A6
#define Y_DIR_PIN 40 // A0
#define Y_STEP_PIN 39 // A6
#define Y_DIR_PIN 40 // A0
#define Y_ENABLE_PIN 38
#define Z_STEP_PIN 42 // A2
#define Z_DIR_PIN 43 // A6
#define Z_ENABLE_PIN 41 // A1
#define Z_STEP_PIN 42 // A2
#define Z_DIR_PIN 43 // A6
#define Z_ENABLE_PIN 41 // A1
#define E0_STEP_PIN 45
#define E0_DIR_PIN 44
@ -83,11 +83,13 @@
//
// Heaters / Fans
//
#define HEATER_0_PIN 7 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_BED_PIN 3 // BED
#define HEATER_0_PIN 7 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_BED_PIN 3 // BED
#define FAN_PIN 9
#ifndef FAN_PIN
#define FAN_PIN 9
#endif
//
// Misc. Functions
@ -122,7 +124,7 @@
#define BTN_EN2 -1
#define BTN_ENC -1
#define SD_DETECT_PIN -1 // Minitronics doesn't use this
#define SD_DETECT_PIN -1 // Minitronics doesn't use this
#endif
//

2
Marlin/pins_MKS_GEN_13.h
View File

@ -33,7 +33,7 @@
#error "MKS GEN 1.3/1.4 supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "MKS GEN > v1.3"
#define BOARD_NAME "MKS GEN >= v1.3"
//
// Heaters / Fans

20
Marlin/pins_OMCA.h
View File

@ -108,13 +108,13 @@
#define E0_DIR_PIN 21
#define E0_ENABLE_PIN 10
#define E1_STEP_PIN -1 // 21
#define E1_DIR_PIN -1 // 20
#define E1_ENABLE_PIN -1 // 19
#define E1_STEP_PIN -1 // 21
#define E1_DIR_PIN -1 // 20
#define E1_ENABLE_PIN -1 // 19
#define E2_STEP_PIN -1 // 21
#define E2_DIR_PIN -1 // 20
#define E2_ENABLE_PIN -1 // 18
#define E2_STEP_PIN -1 // 21
#define E2_DIR_PIN -1 // 20
#define E2_ENABLE_PIN -1 // 18
//
// Temperature Sensors
@ -126,10 +126,12 @@
//
// Heaters / Fans
//
#define HEATER_0_PIN 3 // DONE PWM on RIGHT connector
#define HEATER_0_PIN 3 // DONE PWM on RIGHT connector
#define HEATER_BED_PIN 4
#define FAN_PIN 14 // PWM on MIDDLE connector
#ifndef FAN_PIN
#define FAN_PIN 14 // PWM on MIDDLE connector
#endif
//
// Misc. Functions
@ -145,4 +147,4 @@
#define __GS 18
#define __GD 13
#define UNUSED_PWM 14 // PWM on LEFT connector
#define UNUSED_PWM 14 // PWM on LEFT connector

12
Marlin/pins_OMCA_A.h
View File

@ -107,12 +107,12 @@
#define E0_DIR_PIN 27
#define E0_ENABLE_PIN 24
#define E1_STEP_PIN -1 // 19
#define E1_DIR_PIN -1 // 18
#define E1_STEP_PIN -1 // 19
#define E1_DIR_PIN -1 // 18
#define E1_ENABLE_PIN 24
#define E2_STEP_PIN -1 // 17
#define E2_DIR_PIN -1 // 16
#define E2_STEP_PIN -1 // 17
#define E2_DIR_PIN -1 // 16
#define E2_ENABLE_PIN 24
//
@ -125,7 +125,9 @@
//
#define HEATER_0_PIN 4
#define FAN_PIN 3
#ifndef FAN_PIN
#define FAN_PIN 3
#endif
//
// Misc. Functions

5
Marlin/pins_PRINTRBOARD.h
View File

@ -110,8 +110,9 @@
#define HEATER_2_PIN 45 // F7
#define HEATER_BED_PIN 14 // C4 PWM3C
#define FAN_PIN 16 // C6 PWM3A
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 PWM3A
#endif
//
// Misc. Functions

4
Marlin/pins_PRINTRBOARD_REVF.h
View File

@ -190,7 +190,9 @@
#endif
#endif
#define FAN_PIN 16 // C6 PWM3A
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 PWM3A
#endif
//
// LCD / Controller

4
Marlin/pins_RAMBO.h
View File

@ -127,7 +127,9 @@
#define HEATER_2_PIN 6
#define HEATER_BED_PIN 3
#define FAN_PIN 8
#ifndef FAN_PIN
#define FAN_PIN 8
#endif
#define FAN1_PIN 6
#define FAN2_PIN 2

44
Marlin/pins_RAMPS.h
View File

@ -223,46 +223,48 @@
// Heaters / Fans
//
#ifndef MOSFET_D_PIN
#define MOSFET_D_PIN -1
#define MOSFET_D_PIN -1
#endif
#ifndef RAMPS_D8_PIN
#define RAMPS_D8_PIN 8
#define RAMPS_D8_PIN 8
#endif
#ifndef RAMPS_D9_PIN
#define RAMPS_D9_PIN 9
#define RAMPS_D9_PIN 9
#endif
#ifndef RAMPS_D10_PIN
#define RAMPS_D10_PIN 10
#define RAMPS_D10_PIN 10
#endif
#define HEATER_0_PIN RAMPS_D10_PIN
#define HEATER_0_PIN RAMPS_D10_PIN
#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
#define FAN_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN RAMPS_D9_PIN
#define FAN_PIN RAMPS_D8_PIN
#define HEATER_1_PIN RAMPS_D9_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#define HEATER_1_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan
#define FAN_PIN RAMPS_D9_PIN
#define FAN1_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_SF) // Spindle, Fan
#define FAN_PIN RAMPS_D8_PIN
#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
#define FAN_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#define FAN1_PIN RAMPS_D8_PIN
#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
#define HEATER_BED_PIN RAMPS_D8_PIN
#if HOTENDS == 1
#define FAN1_PIN MOSFET_D_PIN
#define FAN1_PIN MOSFET_D_PIN
#else
#define HEATER_1_PIN MOSFET_D_PIN
#define HEATER_1_PIN MOSFET_D_PIN
#endif
#endif
#ifndef FAN_PIN
#define FAN_PIN 4 // IO pin. Buffer needed
#if ENABLED(IS_RAMPS_EFB) || ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
#define FAN_PIN RAMPS_D9_PIN
#elif ENABLED(IS_RAMPS_EEF) || ENABLED(IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan
#define FAN_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define FAN_PIN 4 // IO pin. Buffer needed
#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
#define FAN_PIN RAMPS_D9_PIN
#endif
#endif
//

8
Marlin/pins_RAMPS_OLD.h
View File

@ -88,11 +88,15 @@
#if ENABLED(RAMPS_V_1_0)
#define HEATER_0_PIN 12
#define HEATER_BED_PIN -1
#define FAN_PIN 11
#ifndef FAN_PIN
#define FAN_PIN 11
#endif
#else // RAMPS_V_1_1 or RAMPS_V_1_2
#define HEATER_0_PIN 10
#define HEATER_BED_PIN 8
#define FAN_PIN 9
#ifndef FAN_PIN
#define FAN_PIN 9
#endif
#endif
//

13
Marlin/pins_RIGIDBOARD.h
View File

@ -36,8 +36,8 @@
//
// MOSFET changes
//
#define RAMPS_D10_PIN 9 // EXTRUDER 1
#define MOSFET_D_PIN 12 // EXTRUDER 2 or FAN
#define RAMPS_D10_PIN 9 // EXTRUDER 1
#define MOSFET_D_PIN 12 // EXTRUDER 2 or FAN
#include "pins_RAMPS.h"
@ -74,9 +74,9 @@
// SPI for Max6675 or Max31855 Thermocouple
#undef MAX6675_SS
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 53 // Don't use pin 53 if there is even the remote possibility of using Display/SD card
#define MAX6675_SS 53 // Don't use pin 53 if there is even the remote possibility of using Display/SD card
#else
#define MAX6675_SS 49 // Don't use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#define MAX6675_SS 49 // Don't use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif
//
@ -85,8 +85,9 @@
#undef HEATER_BED_PIN
#define HEATER_BED_PIN 10
#undef FAN_PIN
#define FAN_PIN 8 // Same as RAMPS_13_EEF
#ifndef FAN_PIN
#define FAN_PIN 8 // Same as RAMPS_13_EEF
#endif
//
// Misc. Functions

10
Marlin/pins_RIGIDBOARD_V2.h
View File

@ -39,12 +39,12 @@
// Channels available for DAC, For Rigidboard there are 4
#define DAC_STEPPER_ORDER { 0, 1, 2, 3 }
#define DAC_STEPPER_SENSE 0.05 // sense resistors on rigidboard stepper chips are .05 value
#define DAC_STEPPER_SENSE 0.05 // sense resistors on rigidboard stepper chips are .05 value
#define DAC_STEPPER_ADDRESS 0
#define DAC_STEPPER_MAX 4096 // was 5000 but max allowable value is actually 4096
#define DAC_STEPPER_VREF 1 // internal Vref, gain 2x = 4.096V
#define DAC_STEPPER_GAIN 1 // value of 1 here sets gain of 2
#define DAC_DISABLE_PIN 42 // set low to enable DAC
#define DAC_STEPPER_MAX 4096 // was 5000 but max allowable value is actually 4096
#define DAC_STEPPER_VREF 1 // internal Vref, gain 2x = 4.096V
#define DAC_STEPPER_GAIN 1 // value of 1 here sets gain of 2
#define DAC_DISABLE_PIN 42 // set low to enable DAC
#define DAC_OR_ADDRESS 0x01
#ifndef DAC_MOTOR_CURRENT_DEFAULT

4
Marlin/pins_RUMBA.h
View File

@ -124,7 +124,9 @@
#define HEATER_3_PIN 8
#define HEATER_BED_PIN 9
#define FAN_PIN 7
#ifndef FAN_PIN
#define FAN_PIN 7
#endif
#define FAN1_PIN 8
//

4
Marlin/pins_SANGUINOLOLU_11.h
View File

@ -100,7 +100,7 @@
#define Z_ENABLE_PIN 26
#define E0_ENABLE_PIN 14
#if ENABLED(LCD_I2C_PANELOLU2)
#if !defined(FAN_PIN) && ENABLED(LCD_I2C_PANELOLU2)
#define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan
#endif
@ -114,7 +114,7 @@
#endif
#if MB(AZTEEG_X1) || MB(STB_11) || ENABLED(IS_MELZI)
#if !defined(FAN_PIN) && (MB(AZTEEG_X1) || MB(STB_11) || ENABLED(IS_MELZI))
#define FAN_PIN 4 // Works for Panelolu2 too
#endif

4
Marlin/pins_SAV_MKI.h
View File

@ -114,7 +114,9 @@
#define HEATER_0_PIN 15 // C5 PWM3B - Extruder
#define HEATER_BED_PIN 14 // C4 PWM3C - Bed
#define FAN_PIN 16 // C6 PWM3A
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 PWM3A
#endif
//
// Misc. Functions

6
Marlin/pins_SCOOVO_X9H.h
View File

@ -91,7 +91,7 @@
#define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
//
// Temperature Sensors
@ -106,7 +106,9 @@
#define HEATER_1_PIN 7
#define HEATER_BED_PIN 3
#define FAN_PIN 8
#ifndef FAN_PIN
#define FAN_PIN 8
#endif
#define FAN1_PIN 6
#define FAN2_PIN 2

13
Marlin/pins_SETHI.h
View File

@ -98,12 +98,13 @@
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 3
#if GEN7_VERSION >= 13
// Gen7 v1.3 removed the fan pin
#define FAN_PIN -1
#else
#define FAN_PIN 31
#ifndef FAN_PIN
#if GEN7_VERSION >= 13
// Gen7 v1.3 removed the fan pin
#define FAN_PIN -1
#else
#define FAN_PIN 31
#endif
#endif
//

4
Marlin/pins_SILVER_GATE.h
View File

@ -56,7 +56,9 @@
#define FIL_RUNOUT_PIN 34 // X_MAX unless overridden
#endif
#define FAN_PIN 5
#ifndef FAN_PIN
#define FAN_PIN 5
#endif
#define HEATER_0_PIN 7

4
Marlin/pins_TEENSY2.h
View File

@ -149,7 +149,9 @@
//
#define HEATER_0_PIN 15 // C5 PWM3B Extruder
#define HEATER_BED_PIN 14 // C4 PWM3C
#define FAN_PIN 16 // C6 PWM3A Fan
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 PWM3A Fan
#endif
//
// Misc. Functions

4
Marlin/pins_TEENSYLU.h
View File

@ -127,7 +127,9 @@
#define HEATER_0_PIN 15 // C5 PWM3B - Extruder
#define HEATER_BED_PIN 14 // C4 PWM3C
#define FAN_PIN 16 // C6 PWM3A
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 PWM3A
#endif
//
// Misc. Functions

4
Marlin/pins_ULTIMAIN_2.h
View File

@ -93,7 +93,9 @@
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#define FAN_PIN 7
#ifndef FAN_PIN
#define FAN_PIN 7
#endif
//
// Misc. Functions

4
Marlin/pins_ULTIMAKER.h
View File

@ -99,7 +99,9 @@
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#define FAN_PIN 7
#ifndef FAN_PIN
#define FAN_PIN 7
#endif
//
// Misc. Functions