Merge pull request #4105 from thinkyhead/rc_combine_probe_blocks
Move raise_z_after_probing into earlier block
This commit is contained in:
commit
5e469622c9
@ -504,6 +504,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
// If you're using the Z MIN endstop connector for your Z probe, this has no effect.
|
// If you're using the Z MIN endstop connector for your Z probe, this has no effect.
|
||||||
//#define DISABLE_Z_MIN_PROBE_ENDSTOP
|
//#define DISABLE_Z_MIN_PROBE_ENDSTOP
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -620,7 +623,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
|
@ -1685,6 +1685,14 @@ static void setup_for_endstop_move() {
|
|||||||
do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], z);
|
do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], z);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
inline void raise_z_after_probing() {
|
||||||
|
#if Z_RAISE_AFTER_PROBING > 0
|
||||||
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||||
|
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("raise_z_after_probing()");
|
||||||
|
#endif
|
||||||
|
do_blocking_move_to_z(current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING);
|
||||||
|
#endif
|
||||||
|
}
|
||||||
#endif //HAS_BED_PROBE
|
#endif //HAS_BED_PROBE
|
||||||
|
|
||||||
#if HAS_Z_SERVO_ENDSTOP
|
#if HAS_Z_SERVO_ENDSTOP
|
||||||
@ -1710,18 +1718,6 @@ static void setup_for_endstop_move() {
|
|||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if HAS_BED_PROBE
|
|
||||||
|
|
||||||
inline void raise_z_after_probing() {
|
|
||||||
#if Z_RAISE_AFTER_PROBING > 0
|
|
||||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
||||||
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("raise_z_after_probing()");
|
|
||||||
#endif
|
|
||||||
do_blocking_move_to_z(current_position[Z_AXIS] + Z_RAISE_AFTER_PROBING);
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(Z_PROBE_SLED)
|
#if ENABLED(Z_PROBE_SLED)
|
||||||
|
|
||||||
#ifndef SLED_DOCKING_OFFSET
|
#ifndef SLED_DOCKING_OFFSET
|
||||||
@ -1964,89 +1960,6 @@ static void setup_for_endstop_move() {
|
|||||||
endstops.enable_z_probe(false);
|
endstops.enable_z_probe(false);
|
||||||
}
|
}
|
||||||
|
|
||||||
#endif // HAS_BED_PROBE
|
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_GRID)
|
|
||||||
|
|
||||||
#if DISABLED(DELTA)
|
|
||||||
|
|
||||||
static void set_bed_level_equation_lsq(double* plane_equation_coefficients) {
|
|
||||||
|
|
||||||
//planner.bed_level_matrix.debug("bed level before");
|
|
||||||
|
|
||||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
||||||
planner.bed_level_matrix.set_to_identity();
|
|
||||||
if (DEBUGGING(LEVELING)) {
|
|
||||||
vector_3 uncorrected_position = planner.adjusted_position();
|
|
||||||
DEBUG_POS(">>> set_bed_level_equation_lsq", uncorrected_position);
|
|
||||||
DEBUG_POS(">>> set_bed_level_equation_lsq", current_position);
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
vector_3 planeNormal = vector_3(-plane_equation_coefficients[0], -plane_equation_coefficients[1], 1);
|
|
||||||
planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal);
|
|
||||||
|
|
||||||
vector_3 corrected_position = planner.adjusted_position();
|
|
||||||
current_position[X_AXIS] = corrected_position.x;
|
|
||||||
current_position[Y_AXIS] = corrected_position.y;
|
|
||||||
current_position[Z_AXIS] = corrected_position.z;
|
|
||||||
|
|
||||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
||||||
if (DEBUGGING(LEVELING)) DEBUG_POS("<<< set_bed_level_equation_lsq", corrected_position);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
sync_plan_position();
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif // !DELTA
|
|
||||||
|
|
||||||
#else // !AUTO_BED_LEVELING_GRID
|
|
||||||
|
|
||||||
static void set_bed_level_equation_3pts(float z_at_pt_1, float z_at_pt_2, float z_at_pt_3) {
|
|
||||||
|
|
||||||
planner.bed_level_matrix.set_to_identity();
|
|
||||||
|
|
||||||
vector_3 pt1 = vector_3(ABL_PROBE_PT_1_X, ABL_PROBE_PT_1_Y, z_at_pt_1);
|
|
||||||
vector_3 pt2 = vector_3(ABL_PROBE_PT_2_X, ABL_PROBE_PT_2_Y, z_at_pt_2);
|
|
||||||
vector_3 pt3 = vector_3(ABL_PROBE_PT_3_X, ABL_PROBE_PT_3_Y, z_at_pt_3);
|
|
||||||
vector_3 planeNormal = vector_3::cross(pt1 - pt2, pt3 - pt2).get_normal();
|
|
||||||
|
|
||||||
if (planeNormal.z < 0) {
|
|
||||||
planeNormal.x = -planeNormal.x;
|
|
||||||
planeNormal.y = -planeNormal.y;
|
|
||||||
planeNormal.z = -planeNormal.z;
|
|
||||||
}
|
|
||||||
|
|
||||||
planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal);
|
|
||||||
|
|
||||||
vector_3 corrected_position = planner.adjusted_position();
|
|
||||||
|
|
||||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
||||||
if (DEBUGGING(LEVELING)) {
|
|
||||||
vector_3 uncorrected_position = corrected_position;
|
|
||||||
DEBUG_POS("set_bed_level_equation_3pts", uncorrected_position);
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
current_position[X_AXIS] = corrected_position.x;
|
|
||||||
current_position[Y_AXIS] = corrected_position.y;
|
|
||||||
current_position[Z_AXIS] = corrected_position.z;
|
|
||||||
|
|
||||||
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
||||||
if (DEBUGGING(LEVELING)) DEBUG_POS("set_bed_level_equation_3pts", corrected_position);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
sync_plan_position();
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif // !AUTO_BED_LEVELING_GRID
|
|
||||||
|
|
||||||
#endif // AUTO_BED_LEVELING_FEATURE
|
|
||||||
|
|
||||||
#if HAS_BED_PROBE
|
|
||||||
|
|
||||||
static void run_z_probe() {
|
static void run_z_probe() {
|
||||||
|
|
||||||
float old_feedrate = feedrate;
|
float old_feedrate = feedrate;
|
||||||
@ -2138,6 +2051,81 @@ static void setup_for_endstop_move() {
|
|||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
|
#if ENABLED(AUTO_BED_LEVELING_GRID)
|
||||||
|
|
||||||
|
#if DISABLED(DELTA)
|
||||||
|
|
||||||
|
static void set_bed_level_equation_lsq(double* plane_equation_coefficients) {
|
||||||
|
|
||||||
|
//planner.bed_level_matrix.debug("bed level before");
|
||||||
|
|
||||||
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||||
|
planner.bed_level_matrix.set_to_identity();
|
||||||
|
if (DEBUGGING(LEVELING)) {
|
||||||
|
vector_3 uncorrected_position = planner.adjusted_position();
|
||||||
|
DEBUG_POS(">>> set_bed_level_equation_lsq", uncorrected_position);
|
||||||
|
DEBUG_POS(">>> set_bed_level_equation_lsq", current_position);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
vector_3 planeNormal = vector_3(-plane_equation_coefficients[0], -plane_equation_coefficients[1], 1);
|
||||||
|
planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal);
|
||||||
|
|
||||||
|
vector_3 corrected_position = planner.adjusted_position();
|
||||||
|
current_position[X_AXIS] = corrected_position.x;
|
||||||
|
current_position[Y_AXIS] = corrected_position.y;
|
||||||
|
current_position[Z_AXIS] = corrected_position.z;
|
||||||
|
|
||||||
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||||
|
if (DEBUGGING(LEVELING)) DEBUG_POS("<<< set_bed_level_equation_lsq", corrected_position);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
sync_plan_position();
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // !DELTA
|
||||||
|
|
||||||
|
#else // !AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
|
static void set_bed_level_equation_3pts(float z_at_pt_1, float z_at_pt_2, float z_at_pt_3) {
|
||||||
|
|
||||||
|
planner.bed_level_matrix.set_to_identity();
|
||||||
|
|
||||||
|
vector_3 pt1 = vector_3(ABL_PROBE_PT_1_X, ABL_PROBE_PT_1_Y, z_at_pt_1);
|
||||||
|
vector_3 pt2 = vector_3(ABL_PROBE_PT_2_X, ABL_PROBE_PT_2_Y, z_at_pt_2);
|
||||||
|
vector_3 pt3 = vector_3(ABL_PROBE_PT_3_X, ABL_PROBE_PT_3_Y, z_at_pt_3);
|
||||||
|
vector_3 planeNormal = vector_3::cross(pt1 - pt2, pt3 - pt2).get_normal();
|
||||||
|
|
||||||
|
if (planeNormal.z < 0) {
|
||||||
|
planeNormal.x = -planeNormal.x;
|
||||||
|
planeNormal.y = -planeNormal.y;
|
||||||
|
planeNormal.z = -planeNormal.z;
|
||||||
|
}
|
||||||
|
|
||||||
|
planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal);
|
||||||
|
|
||||||
|
vector_3 corrected_position = planner.adjusted_position();
|
||||||
|
|
||||||
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||||
|
if (DEBUGGING(LEVELING)) {
|
||||||
|
vector_3 uncorrected_position = corrected_position;
|
||||||
|
DEBUG_POS("set_bed_level_equation_3pts", uncorrected_position);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
current_position[X_AXIS] = corrected_position.x;
|
||||||
|
current_position[Y_AXIS] = corrected_position.y;
|
||||||
|
current_position[Z_AXIS] = corrected_position.z;
|
||||||
|
|
||||||
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
||||||
|
if (DEBUGGING(LEVELING)) DEBUG_POS("set_bed_level_equation_3pts", corrected_position);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
sync_plan_position();
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // !AUTO_BED_LEVELING_GRID
|
||||||
|
|
||||||
inline void do_blocking_move_to_xy(float x, float y) {
|
inline void do_blocking_move_to_xy(float x, float y) {
|
||||||
do_blocking_move_to(x, y, current_position[Z_AXIS]);
|
do_blocking_move_to(x, y, current_position[Z_AXIS]);
|
||||||
}
|
}
|
||||||
@ -4176,19 +4164,7 @@ inline void gcode_M42() {
|
|||||||
} // code_seen('S')
|
} // code_seen('S')
|
||||||
}
|
}
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE) && ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
|
#if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
|
||||||
|
|
||||||
/**
|
|
||||||
* This is redundant since the SanityCheck.h already checks for a valid
|
|
||||||
* Z_MIN_PROBE_PIN, but here for clarity.
|
|
||||||
*/
|
|
||||||
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
|
|
||||||
#if !HAS_Z_MIN_PROBE_PIN
|
|
||||||
#error "You must define Z_MIN_PROBE_PIN to enable Z probe repeatability calculation."
|
|
||||||
#endif
|
|
||||||
#elif !HAS_Z_MIN
|
|
||||||
#error "You must define Z_MIN_PIN to enable Z probe repeatability calculation."
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* M48: Z probe repeatability measurement function.
|
* M48: Z probe repeatability measurement function.
|
||||||
@ -4451,7 +4427,7 @@ inline void gcode_M42() {
|
|||||||
report_current_position();
|
report_current_position();
|
||||||
}
|
}
|
||||||
|
|
||||||
#endif // AUTO_BED_LEVELING_FEATURE && Z_MIN_PROBE_REPEATABILITY_TEST
|
#endif // Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* M75: Start print timer
|
* M75: Start print timer
|
||||||
@ -6970,11 +6946,11 @@ void process_next_command() {
|
|||||||
gcode_M42();
|
gcode_M42();
|
||||||
break;
|
break;
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE) && ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
|
#if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
|
||||||
case 48: // M48 Z probe repeatability
|
case 48: // M48 Z probe repeatability
|
||||||
gcode_M48();
|
gcode_M48();
|
||||||
break;
|
break;
|
||||||
#endif // AUTO_BED_LEVELING_FEATURE && Z_MIN_PROBE_REPEATABILITY_TEST
|
#endif // Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
case 75: // Start print timer
|
case 75: // Start print timer
|
||||||
gcode_M75();
|
gcode_M75();
|
||||||
|
@ -300,10 +300,12 @@
|
|||||||
#else
|
#else
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* Require some kind of probe for bed leveling
|
* Require some kind of probe for bed leveling and probe testing
|
||||||
*/
|
*/
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
#error "AUTO_BED_LEVELING_FEATURE requires a probe! Define a Z Servo, MECHANICAL_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
|
#error "AUTO_BED_LEVELING_FEATURE requires a probe! Define a Z Servo, MECHANICAL_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
|
||||||
|
#elif ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
|
||||||
|
#error "Z_MIN_PROBE_REPEATABILITY_TEST requires a probe! Define a Z Servo, MECHANICAL_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
@ -318,11 +320,7 @@
|
|||||||
*/
|
*/
|
||||||
#if !PIN_EXISTS(Z_MIN)
|
#if !PIN_EXISTS(Z_MIN)
|
||||||
#if !PIN_EXISTS(Z_MIN_PROBE) || (DISABLED(Z_MIN_PROBE_ENDSTOP) || ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP)) // It's possible for someone to set a pin for the Z probe, but not enable it.
|
#if !PIN_EXISTS(Z_MIN_PROBE) || (DISABLED(Z_MIN_PROBE_ENDSTOP) || ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP)) // It's possible for someone to set a pin for the Z probe, but not enable it.
|
||||||
#if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
|
#error "AUTO_BED_LEVELING_FEATURE requires a Z_MIN or Z_PROBE endstop. Z_MIN_PIN or Z_MIN_PROBE_PIN must point to a valid hardware pin."
|
||||||
#error "You must have a Z_MIN or Z_PROBE endstop to enable Z_MIN_PROBE_REPEATABILITY_TEST."
|
|
||||||
#else
|
|
||||||
#error "AUTO_BED_LEVELING_FEATURE requires a Z_MIN or Z_PROBE endstop. Z_MIN_PIN or Z_MIN_PROBE_PIN must point to a valid hardware pin."
|
|
||||||
#endif
|
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
@ -503,6 +503,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
// If you're using the Z MIN endstop connector for your Z probe, this has no effect.
|
// If you're using the Z MIN endstop connector for your Z probe, this has no effect.
|
||||||
//#define DISABLE_Z_MIN_PROBE_ENDSTOP
|
//#define DISABLE_Z_MIN_PROBE_ENDSTOP
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -619,7 +622,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
|
@ -486,6 +486,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
// Allen Key Probe is defined in the Delta example configurations.
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
//
|
//
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -602,8 +605,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
//
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
// There are 2 different ways to specify probing locations:
|
// There are 2 different ways to specify probing locations:
|
||||||
|
@ -484,6 +484,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
// Allen Key Probe is defined in the Delta example configurations.
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
//
|
//
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -600,8 +603,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
//
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
// There are 2 different ways to specify probing locations:
|
// There are 2 different ways to specify probing locations:
|
||||||
|
@ -496,6 +496,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||||||
// Allen Key Probe is defined in the Delta example configurations.
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
//
|
//
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -612,7 +615,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
|
@ -498,6 +498,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
// Allen Key Probe is defined in the Delta example configurations.
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
//
|
//
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -614,7 +617,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
|
@ -521,6 +521,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
// Allen Key Probe is defined in the Delta example configurations.
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
//
|
//
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -637,7 +640,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
|
@ -504,6 +504,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
// Allen Key Probe is defined in the Delta example configurations.
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
//
|
//
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -620,7 +623,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
|
@ -498,6 +498,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
// Allen Key Probe is defined in the Delta example configurations.
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
//
|
//
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -614,8 +617,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
//
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
// There are 2 different ways to specify probing locations:
|
// There are 2 different ways to specify probing locations:
|
||||||
|
@ -512,6 +512,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
// Allen Key Probe is defined in the Delta example configurations.
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
//
|
//
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -628,8 +631,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
//
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
// There are 2 different ways to specify probing locations:
|
// There are 2 different ways to specify probing locations:
|
||||||
|
@ -525,6 +525,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
// Allen Key Probe is defined in the Delta example configurations.
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
//
|
//
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -641,7 +644,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
|
@ -496,6 +496,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||||||
// Allen Key Probe is defined in the Delta example configurations.
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
//
|
//
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -612,7 +615,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
|
@ -504,6 +504,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
// Allen Key Probe is defined in the Delta example configurations.
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
//
|
//
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -620,7 +623,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
|
@ -583,6 +583,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||||||
|
|
||||||
#endif // Z_PROBE_ALLEN_KEY
|
#endif // Z_PROBE_ALLEN_KEY
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -699,8 +702,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
//
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
// There are 2 different ways to specify probing locations:
|
// There are 2 different ways to specify probing locations:
|
||||||
|
@ -577,6 +577,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||||||
|
|
||||||
#endif // Z_PROBE_ALLEN_KEY
|
#endif // Z_PROBE_ALLEN_KEY
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -693,8 +696,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
//
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
// There are 2 different ways to specify probing locations:
|
// There are 2 different ways to specify probing locations:
|
||||||
|
@ -580,6 +580,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
#endif // Z_PROBE_ALLEN_KEY
|
#endif // Z_PROBE_ALLEN_KEY
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -696,8 +699,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
//
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
// There are 2 different ways to specify probing locations:
|
// There are 2 different ways to specify probing locations:
|
||||||
|
@ -574,6 +574,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
#endif // Z_PROBE_ALLEN_KEY
|
#endif // Z_PROBE_ALLEN_KEY
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -690,8 +693,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
//
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
// There are 2 different ways to specify probing locations:
|
// There are 2 different ways to specify probing locations:
|
||||||
|
@ -575,6 +575,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
#endif // Z_PROBE_ALLEN_KEY
|
#endif // Z_PROBE_ALLEN_KEY
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -691,8 +694,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
//
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
// There are 2 different ways to specify probing locations:
|
// There are 2 different ways to specify probing locations:
|
||||||
|
@ -507,6 +507,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
// Allen Key Probe is defined in the Delta example configurations.
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
//
|
//
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -623,7 +626,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
|
@ -494,6 +494,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||||||
// Allen Key Probe is defined in the Delta example configurations.
|
// Allen Key Probe is defined in the Delta example configurations.
|
||||||
//
|
//
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
|
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
//
|
//
|
||||||
// Probe Raise options provide clearance for the probe to deploy and stow.
|
// Probe Raise options provide clearance for the probe to deploy and stow.
|
||||||
//
|
//
|
||||||
@ -610,7 +613,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
|
|||||||
|
|
||||||
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
//#define AUTO_BED_LEVELING_FEATURE // Delete the comment to enable (remove // at the start of the line)
|
||||||
//#define DEBUG_LEVELING_FEATURE
|
//#define DEBUG_LEVELING_FEATURE
|
||||||
#define Z_MIN_PROBE_REPEATABILITY_TEST // If not commented out, Z Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
|
|
||||||
|
|
||||||
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
|
||||||
|
|
||||||
|
Loading…
Reference in New Issue
Block a user