Fixed in-line comments and escaping

* "G1 X1 ; test" was not executing "G1 X1" due to never leaving comment mode.
  * "M117 Hello \;)" printed "Hello \" to the display due to not replacing serial_char properly.

Tested with the following commands:
    * M117 Hello ; test => displays "Hello" on display, ignores "test"
    * G1 X1 ; foo => moves 1mm in X, ignores "foo"
    * ; test => completely ignored, not even acknowledged
    * M117 Hello \;) => displays "Hello ;)" on display
    * M117 Hello \\;) => displays "Hello \" on display, ignores ")"
This commit is contained in:
Gina Häußge 2015-03-05 23:30:34 +01:00
parent 99fb1bc3e8
commit 63b62d8d4e
2 changed files with 96 additions and 71 deletions

View File

@ -101,3 +101,25 @@
* M908 - Control digital trimpot directly. * M908 - Control digital trimpot directly.
* M928 - Start SD logging (M928 filename.g) - ended by M29 * M928 - Start SD logging (M928 filename.g) - ended by M29
* M999 - Restart after being stopped by error * M999 - Restart after being stopped by error
# Comments
Comments start at a `;` (semicolon) and end with the end of the line:
N3 T0*57 ; This is a comment
N4 G92 E0*67
; So is this
N5 G28*22
(example taken from the [RepRap wiki](http://reprap.org/wiki/Gcode#Comments))
If you need to use a literal `;` somewhere (for example within `M117`), you can escape semicolons with a `\`
(backslash):
M117 Hello \;)
`\` can also be used to escape `\` itself, if you need a literal `\` in front of a `;`:
M117 backslash: \\;and a comment
Please note that hosts should strip any comments before sending GCODE to the printer in order to save bandwidth.

View File

@ -732,100 +732,103 @@ void get_command()
serial_char == '\r' || serial_char == '\r' ||
serial_count >= (MAX_CMD_SIZE - 1) ) serial_count >= (MAX_CMD_SIZE - 1) )
{ {
if(!serial_count) { //if empty line // end of line == end of comment
comment_mode = false; //for new command comment_mode = false;
if(!serial_count) {
// short cut for empty lines
return; return;
} }
cmdbuffer[bufindw][serial_count] = 0; //terminate string cmdbuffer[bufindw][serial_count] = 0; //terminate string
if(!comment_mode){
fromsd[bufindw] = false; fromsd[bufindw] = false;
if(strchr(cmdbuffer[bufindw], 'N') != NULL) if(strchr(cmdbuffer[bufindw], 'N') != NULL)
{
strchr_pointer = strchr(cmdbuffer[bufindw], 'N');
gcode_N = (strtol(strchr_pointer + 1, NULL, 10));
if(gcode_N != gcode_LastN+1 && (strstr_P(cmdbuffer[bufindw], PSTR("M110")) == NULL) ) {
SERIAL_ERROR_START;
SERIAL_ERRORPGM(MSG_ERR_LINE_NO);
SERIAL_ERRORLN(gcode_LastN);
//Serial.println(gcode_N);
FlushSerialRequestResend();
serial_count = 0;
return;
}
if(strchr(cmdbuffer[bufindw], '*') != NULL)
{ {
strchr_pointer = strchr(cmdbuffer[bufindw], 'N'); byte checksum = 0;
gcode_N = (strtol(strchr_pointer + 1, NULL, 10)); byte count = 0;
if(gcode_N != gcode_LastN+1 && (strstr_P(cmdbuffer[bufindw], PSTR("M110")) == NULL) ) { while(cmdbuffer[bufindw][count] != '*') checksum = checksum^cmdbuffer[bufindw][count++];
SERIAL_ERROR_START; strchr_pointer = strchr(cmdbuffer[bufindw], '*');
SERIAL_ERRORPGM(MSG_ERR_LINE_NO);
SERIAL_ERRORLN(gcode_LastN);
//Serial.println(gcode_N);
FlushSerialRequestResend();
serial_count = 0;
return;
}
if(strchr(cmdbuffer[bufindw], '*') != NULL) if( (int)(strtod(strchr_pointer + 1, NULL)) != checksum) {
{
byte checksum = 0;
byte count = 0;
while(cmdbuffer[bufindw][count] != '*') checksum = checksum^cmdbuffer[bufindw][count++];
strchr_pointer = strchr(cmdbuffer[bufindw], '*');
if( (int)(strtod(strchr_pointer + 1, NULL)) != checksum) {
SERIAL_ERROR_START;
SERIAL_ERRORPGM(MSG_ERR_CHECKSUM_MISMATCH);
SERIAL_ERRORLN(gcode_LastN);
FlushSerialRequestResend();
serial_count = 0;
return;
}
//if no errors, continue parsing
}
else
{
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORPGM(MSG_ERR_NO_CHECKSUM); SERIAL_ERRORPGM(MSG_ERR_CHECKSUM_MISMATCH);
SERIAL_ERRORLN(gcode_LastN); SERIAL_ERRORLN(gcode_LastN);
FlushSerialRequestResend(); FlushSerialRequestResend();
serial_count = 0; serial_count = 0;
return; return;
} }
gcode_LastN = gcode_N;
//if no errors, continue parsing //if no errors, continue parsing
} }
else // if we don't receive 'N' but still see '*' else
{ {
if((strchr(cmdbuffer[bufindw], '*') != NULL)) SERIAL_ERROR_START;
{ SERIAL_ERRORPGM(MSG_ERR_NO_CHECKSUM);
SERIAL_ERROR_START; SERIAL_ERRORLN(gcode_LastN);
SERIAL_ERRORPGM(MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM); FlushSerialRequestResend();
SERIAL_ERRORLN(gcode_LastN); serial_count = 0;
serial_count = 0; return;
return;
}
}
if((strchr(cmdbuffer[bufindw], 'G') != NULL)){
strchr_pointer = strchr(cmdbuffer[bufindw], 'G');
switch((int)((strtod(strchr_pointer + 1, NULL)))){
case 0:
case 1:
case 2:
case 3:
if (Stopped == true) {
SERIAL_ERRORLNPGM(MSG_ERR_STOPPED);
LCD_MESSAGEPGM(MSG_STOPPED);
}
break;
default:
break;
}
} }
//If command was e-stop process now gcode_LastN = gcode_N;
if(strcmp(cmdbuffer[bufindw], "M112") == 0) //if no errors, continue parsing
kill();
bufindw = (bufindw + 1)%BUFSIZE;
buflen += 1;
} }
else // if we don't receive 'N' but still see '*'
{
if((strchr(cmdbuffer[bufindw], '*') != NULL))
{
SERIAL_ERROR_START;
SERIAL_ERRORPGM(MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM);
SERIAL_ERRORLN(gcode_LastN);
serial_count = 0;
return;
}
}
if((strchr(cmdbuffer[bufindw], 'G') != NULL)){
strchr_pointer = strchr(cmdbuffer[bufindw], 'G');
switch((int)((strtod(strchr_pointer + 1, NULL)))){
case 0:
case 1:
case 2:
case 3:
if (Stopped == true) {
SERIAL_ERRORLNPGM(MSG_ERR_STOPPED);
LCD_MESSAGEPGM(MSG_STOPPED);
}
break;
default:
break;
}
}
//If command was e-stop process now
if(strcmp(cmdbuffer[bufindw], "M112") == 0)
kill();
bufindw = (bufindw + 1)%BUFSIZE;
buflen += 1;
serial_count = 0; //clear buffer serial_count = 0; //clear buffer
} }
else if(serial_char == '\\') { //Handle escapes else if(serial_char == '\\') { //Handle escapes
if(MYSERIAL.available() > 0 && buflen < BUFSIZE) { if(MYSERIAL.available() > 0 && buflen < BUFSIZE) {
// if we have one more character, copy it over // if we have one more character, copy it over
MYSERIAL.read(); serial_char = MYSERIAL.read();
cmdbuffer[bufindw][serial_count++] = serial_char; cmdbuffer[bufindw][serial_count++] = serial_char;
} }