Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
This commit is contained in:
Daid
commit
673577a31b
@ -229,6 +229,22 @@ OPT = s
|
||||
|
||||
DEFINES ?=
|
||||
|
||||
# Program settings
|
||||
CC = $(AVR_TOOLS_PATH)avr-gcc
|
||||
CXX = $(AVR_TOOLS_PATH)avr-g++
|
||||
OBJCOPY = $(AVR_TOOLS_PATH)avr-objcopy
|
||||
OBJDUMP = $(AVR_TOOLS_PATH)avr-objdump
|
||||
AR = $(AVR_TOOLS_PATH)avr-ar
|
||||
SIZE = $(AVR_TOOLS_PATH)avr-size
|
||||
NM = $(AVR_TOOLS_PATH)avr-nm
|
||||
AVRDUDE = avrdude
|
||||
REMOVE = rm -f
|
||||
MV = mv -f
|
||||
|
||||
# Tool for testing compiler flags
|
||||
cc-option=$(shell if test -z "`$(1) $(2) -S -o /dev/null -xc /dev/null 2>&1`" \
|
||||
; then echo "$(2)"; else echo "$(3)"; fi ;)
|
||||
|
||||
# Place -D or -U options here
|
||||
CDEFS = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)}
|
||||
CXXDEFS = $(CDEFS)
|
||||
@ -259,10 +275,12 @@ CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
|
||||
endif
|
||||
#CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
|
||||
|
||||
CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CEXTRA) $(CTUNING)
|
||||
CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT) -Wall $(CEXTRA) $(CTUNING)
|
||||
CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CEXTRA) $(CTUNING) \
|
||||
$(call cc-option,$(CC),-flto -fwhole-program,)
|
||||
CXXFLAGS := $(CDEFS) $(CINCS) -O$(OPT) -Wall $(CEXTRA) $(CTUNING) \
|
||||
$(call cc-option,$(CC),-flto -fwhole-program,)
|
||||
#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
|
||||
LDFLAGS = -lm
|
||||
LDFLAGS = -lm -Wl,--relax
|
||||
|
||||
|
||||
# Programming support using avrdude. Settings and variables.
|
||||
@ -272,18 +290,6 @@ AVRDUDE_FLAGS = -D -C $(ARDUINO_INSTALL_DIR)/hardware/tools/avrdude.conf \
|
||||
-p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
|
||||
-b $(UPLOAD_RATE)
|
||||
|
||||
# Program settings
|
||||
CC = $(AVR_TOOLS_PATH)avr-gcc
|
||||
CXX = $(AVR_TOOLS_PATH)avr-g++
|
||||
OBJCOPY = $(AVR_TOOLS_PATH)avr-objcopy
|
||||
OBJDUMP = $(AVR_TOOLS_PATH)avr-objdump
|
||||
AR = $(AVR_TOOLS_PATH)avr-ar
|
||||
SIZE = $(AVR_TOOLS_PATH)avr-size
|
||||
NM = $(AVR_TOOLS_PATH)avr-nm
|
||||
AVRDUDE = avrdude
|
||||
REMOVE = rm -f
|
||||
MV = mv -f
|
||||
|
||||
# Define all object files.
|
||||
OBJ = ${patsubst %.c, $(BUILD_DIR)/%.o, ${SRC}}
|
||||
OBJ += ${patsubst %.cpp, $(BUILD_DIR)/%.o, ${CXXSRC}}
|
||||
@ -380,9 +386,13 @@ extcoff: $(TARGET).elf
|
||||
$(NM) -n $< > $@
|
||||
|
||||
# Link: create ELF output file from library.
|
||||
$(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
|
||||
$(BUILD_DIR)/$(TARGET).elf: $(BUILD_DIR)/$(TARGET).o
|
||||
$(Pecho) " CXX $@"
|
||||
$P $(CC) $(ALL_CXXFLAGS) -Wl,--gc-sections -o $@ -L. $(OBJ) $(LDFLAGS)
|
||||
$P $(CC) $(ALL_CXXFLAGS) -Wl,--gc-sections -o $@ -L. $^ $(LDFLAGS)
|
||||
|
||||
$(BUILD_DIR)/$(TARGET).o: $(OBJ) Configuration.h
|
||||
$(Pecho) " CXX $@"
|
||||
$P $(CC) $(ALL_CXXFLAGS) -nostdlib -Wl,-r -o $@ $(OBJ)
|
||||
|
||||
$(BUILD_DIR)/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CC $<"
|
||||
|
||||
@ -432,9 +432,9 @@ void manage_heater()
|
||||
soft_pwm_bed = 0;
|
||||
}
|
||||
|
||||
#elif not defined BED_LIMIT_SWITCHING
|
||||
#elif !defined(BED_LIMIT_SWITCHING)
|
||||
// Check if temperature is within the correct range
|
||||
if((current_temperature_bed > BED_MAXTEMP) && (current_temperature_bed < BED_MINTEMP))
|
||||
if((current_temperature_bed > BED_MINTEMP) && (current_temperature_bed < BED_MAXTEMP))
|
||||
{
|
||||
if(current_temperature_bed >= target_temperature_bed)
|
||||
{
|
||||
@ -1042,6 +1042,7 @@ ISR(TIMER0_COMPB_vect)
|
||||
#if EXTRUDERS > 2
|
||||
current_temperature_raw[2] = raw_temp_2_value;
|
||||
#endif
|
||||
current_temperature_bed_raw = raw_temp_bed_value;
|
||||
}
|
||||
|
||||
temp_meas_ready = true;
|
||||
@ -1101,9 +1102,9 @@ ISR(TIMER0_COMPB_vect)
|
||||
/* No bed MINTEMP error? */
|
||||
#if defined(BED_MAXTEMP) && (TEMP_SENSOR_BED != 0)
|
||||
# if HEATER_BED_RAW_LO_TEMP > HEATER_BED_RAW_HI_TEMP
|
||||
if(current_temperature_bed <= bed_maxttemp_raw) {
|
||||
if(current_temperature_bed_raw <= bed_maxttemp_raw) {
|
||||
#else
|
||||
if(current_temperature_bed >= bed_maxttemp_raw) {
|
||||
if(current_temperature_bed_raw >= bed_maxttemp_raw) {
|
||||
#endif
|
||||
target_temperature_bed = 0;
|
||||
bed_max_temp_error();
|
||||
|
||||
@ -474,7 +474,7 @@ const short temptable_55[][2] PROGMEM = {
|
||||
|
||||
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
|
||||
#ifndef HEATER_0_RAW_HI_TEMP
|
||||
# if HEATER_0_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
|
||||
# ifdef HEATER_0_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
|
||||
# define HEATER_0_RAW_HI_TEMP 0
|
||||
# define HEATER_0_RAW_LO_TEMP 16383
|
||||
# else //In case of an thermocouple the highest temperature results in the highest ADC value
|
||||
@ -497,7 +497,7 @@ const short temptable_55[][2] PROGMEM = {
|
||||
|
||||
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
|
||||
#ifndef HEATER_1_RAW_HI_TEMP
|
||||
# if HEATER_1_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
|
||||
# ifdef HEATER_1_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
|
||||
# define HEATER_1_RAW_HI_TEMP 0
|
||||
# define HEATER_1_RAW_LO_TEMP 16383
|
||||
# else //In case of an thermocouple the highest temperature results in the highest ADC value
|
||||
@ -520,7 +520,7 @@ const short temptable_55[][2] PROGMEM = {
|
||||
|
||||
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
|
||||
#ifndef HEATER_2_RAW_HI_TEMP
|
||||
# if HEATER_2_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
|
||||
# ifdef HEATER_2_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
|
||||
# define HEATER_2_RAW_HI_TEMP 0
|
||||
# define HEATER_2_RAW_LO_TEMP 16383
|
||||
# else //In case of an thermocouple the highest temperature results in the highest ADC value
|
||||
@ -540,7 +540,7 @@ const short temptable_55[][2] PROGMEM = {
|
||||
|
||||
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
|
||||
#ifndef HEATER_BED_RAW_HI_TEMP
|
||||
# if BED_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
|
||||
# ifdef BED_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
|
||||
# define HEATER_BED_RAW_HI_TEMP 0
|
||||
# define HEATER_BED_RAW_LO_TEMP 16383
|
||||
# else //In case of an thermocouple the highest temperature results in the highest ADC value
|
||||
|
||||
@ -476,7 +476,7 @@ static void lcd_control_temperature_preheat_pla_settings_menu()
|
||||
#if TEMP_SENSOR_BED != 0
|
||||
MENU_ITEM_EDIT(int3, MSG_BED, &plaPreheatHPBTemp, 0, BED_MAXTEMP - 15);
|
||||
#endif
|
||||
#if EEPROM_SETTINGS
|
||||
#ifdef EEPROM_SETTINGS
|
||||
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
|
||||
#endif
|
||||
END_MENU();
|
||||
@ -491,7 +491,7 @@ static void lcd_control_temperature_preheat_abs_settings_menu()
|
||||
#if TEMP_SENSOR_BED != 0
|
||||
MENU_ITEM_EDIT(int3, MSG_BED, &absPreheatHPBTemp, 0, BED_MAXTEMP - 15);
|
||||
#endif
|
||||
#if EEPROM_SETTINGS
|
||||
#ifdef EEPROM_SETTINGS
|
||||
MENU_ITEM(function, MSG_STORE_EPROM, Config_StoreSettings);
|
||||
#endif
|
||||
END_MENU();
|
||||
|
||||
Loading…
Reference in New Issue
Block a user