diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 03f06a781..055dd0645 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -38,18 +38,26 @@
 //===========================================================================
 //=============================Thermal Settings  ============================
 //===========================================================================
-
+//
+//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
+//
 //// Temperature sensor settings:
 // -2 is thermocouple with MAX6675 (only for sensor 0)
 // -1 is thermocouple with AD595
 // 0 is not used
-// 1 is 100k thermistor
-// 2 is 200k thermistor
-// 3 is mendel-parts thermistor
+// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
+// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
+// 3 is mendel-parts thermistor (4.7k pullup)
 // 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
-// 5 is ParCan supplied 104GT-2 100K
-// 6 is EPCOS 100k
-// 7 is 100k Honeywell thermistor 135-104LAG-J01
+// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan) (4.7k pullup)
+// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
+// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
+//
+//    1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k 
+//                          (but gives greater accuracy and more stable PID)
+// 51 is 100k thermistor - EPCOS (1k pullup)
+// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
+// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan) (1k pullup)
 
 #define TEMP_SENSOR_0 -1
 #define TEMP_SENSOR_1 0
diff --git a/Marlin/thermistortables.h b/Marlin/thermistortables.h
index 42cda4168..6cff32930 100644
--- a/Marlin/thermistortables.h
+++ b/Marlin/thermistortables.h
@@ -73,27 +73,41 @@ const short temptable_1[][2] PROGMEM = {
 #endif
 #if (THERMISTORHEATER_0 == 2) || (THERMISTORHEATER_1 == 2) || (THERMISTORHEATER_2 == 2) || (THERMISTORBED == 2) //200k bed thermistor
 const short temptable_2[][2] PROGMEM = {
+//200k ATC Semitec 204GT-2
+//Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
+// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
    {1*OVERSAMPLENR, 848},
-   {54*OVERSAMPLENR, 275},
-   {107*OVERSAMPLENR, 228},
-   {160*OVERSAMPLENR, 202},
-   {213*OVERSAMPLENR, 185},
-   {266*OVERSAMPLENR, 171},
-   {319*OVERSAMPLENR, 160},
-   {372*OVERSAMPLENR, 150},
-   {425*OVERSAMPLENR, 141},
-   {478*OVERSAMPLENR, 133},
-   {531*OVERSAMPLENR, 125},
-   {584*OVERSAMPLENR, 118},
-   {637*OVERSAMPLENR, 110},
-   {690*OVERSAMPLENR, 103},
-   {743*OVERSAMPLENR, 95},
-   {796*OVERSAMPLENR, 86},
-   {849*OVERSAMPLENR, 77},
-   {902*OVERSAMPLENR, 65},
-   {955*OVERSAMPLENR, 49},
-   {1008*OVERSAMPLENR, 17},
-   {1020*OVERSAMPLENR, 0} //safety
+   {30*OVERSAMPLENR, 300}, //top rating 300C
+   {34*OVERSAMPLENR, 290},
+   {39*OVERSAMPLENR, 280},
+   {46*OVERSAMPLENR, 270},
+   {53*OVERSAMPLENR, 260},
+   {63*OVERSAMPLENR, 250},
+   {74*OVERSAMPLENR, 240},
+   {87*OVERSAMPLENR, 230},
+   {104*OVERSAMPLENR, 220},
+   {124*OVERSAMPLENR, 210},
+   {148*OVERSAMPLENR, 200},
+   {176*OVERSAMPLENR, 190},
+   {211*OVERSAMPLENR, 180},
+   {252*OVERSAMPLENR, 170},
+   {301*OVERSAMPLENR, 160},
+   {357*OVERSAMPLENR, 150},
+   {420*OVERSAMPLENR, 140},
+   {489*OVERSAMPLENR, 130},
+   {562*OVERSAMPLENR, 120},
+   {636*OVERSAMPLENR, 110},
+   {708*OVERSAMPLENR, 100},
+   {775*OVERSAMPLENR, 90},
+   {835*OVERSAMPLENR, 80},
+   {884*OVERSAMPLENR, 70},
+   {924*OVERSAMPLENR, 60},
+   {955*OVERSAMPLENR, 50},
+   {977*OVERSAMPLENR, 40},
+   {993*OVERSAMPLENR, 30},
+   {1004*OVERSAMPLENR, 20},
+   {1012*OVERSAMPLENR, 10},
+   {1016*OVERSAMPLENR, 0},
 };
 
 #endif
@@ -157,73 +171,48 @@ const short temptable_4[][2] PROGMEM = {
 
 #if (THERMISTORHEATER_0 == 5) || (THERMISTORHEATER_1 == 5) || (THERMISTORHEATER_2 == 5) || (THERMISTORBED == 5) //100k ParCan thermistor (104GT-2)
 const short temptable_5[][2] PROGMEM = {
-{1*OVERSAMPLENR, 713},
-{18*OVERSAMPLENR, 316},
-{35*OVERSAMPLENR, 266},
-{52*OVERSAMPLENR, 239},
-{69*OVERSAMPLENR, 221},
-{86*OVERSAMPLENR, 208},
-{103*OVERSAMPLENR, 197},
-{120*OVERSAMPLENR, 188},
-{137*OVERSAMPLENR, 181},
-{154*OVERSAMPLENR, 174},
-{171*OVERSAMPLENR, 169},
-{188*OVERSAMPLENR, 163},
-{205*OVERSAMPLENR, 159},
-{222*OVERSAMPLENR, 154},
-{239*OVERSAMPLENR, 150},
-{256*OVERSAMPLENR, 147},
-{273*OVERSAMPLENR, 143},
-{290*OVERSAMPLENR, 140},
-{307*OVERSAMPLENR, 136},
-{324*OVERSAMPLENR, 133},
-{341*OVERSAMPLENR, 130},
-{358*OVERSAMPLENR, 128},
-{375*OVERSAMPLENR, 125},
-{392*OVERSAMPLENR, 122},
-{409*OVERSAMPLENR, 120},
-{426*OVERSAMPLENR, 117},
-{443*OVERSAMPLENR, 115},
-{460*OVERSAMPLENR, 112},
-{477*OVERSAMPLENR, 110},
-{494*OVERSAMPLENR, 108},
-{511*OVERSAMPLENR, 106},
-{528*OVERSAMPLENR, 103},
-{545*OVERSAMPLENR, 101},
-{562*OVERSAMPLENR, 99},
-{579*OVERSAMPLENR, 97},
-{596*OVERSAMPLENR, 95},
-{613*OVERSAMPLENR, 92},
-{630*OVERSAMPLENR, 90},
-{647*OVERSAMPLENR, 88},
-{664*OVERSAMPLENR, 86},
-{681*OVERSAMPLENR, 84},
-{698*OVERSAMPLENR, 81},
-{715*OVERSAMPLENR, 79},
-{732*OVERSAMPLENR, 77},
-{749*OVERSAMPLENR, 75},
-{766*OVERSAMPLENR, 72},
-{783*OVERSAMPLENR, 70},
-{800*OVERSAMPLENR, 67},
-{817*OVERSAMPLENR, 64},
-{834*OVERSAMPLENR, 61},
-{851*OVERSAMPLENR, 58},
-{868*OVERSAMPLENR, 55},
-{885*OVERSAMPLENR, 52},
-{902*OVERSAMPLENR, 48},
-{919*OVERSAMPLENR, 44},
-{936*OVERSAMPLENR, 40},
-{953*OVERSAMPLENR, 34},
-{970*OVERSAMPLENR, 28},
-{987*OVERSAMPLENR, 20},
-{1004*OVERSAMPLENR, 8},
-{1021*OVERSAMPLENR, 0}
+// ATC Semitec 104GT-2 (Used in ParCan)
+// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
+// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
+   {1*OVERSAMPLENR, 713},
+   {17*OVERSAMPLENR, 300}, //top rating 300C
+   {20*OVERSAMPLENR, 290},
+   {23*OVERSAMPLENR, 280},
+   {27*OVERSAMPLENR, 270},
+   {31*OVERSAMPLENR, 260},
+   {37*OVERSAMPLENR, 250},
+   {43*OVERSAMPLENR, 240},
+   {51*OVERSAMPLENR, 230},
+   {61*OVERSAMPLENR, 220},
+   {73*OVERSAMPLENR, 210},
+   {87*OVERSAMPLENR, 200},
+   {106*OVERSAMPLENR, 190},
+   {128*OVERSAMPLENR, 180},
+   {155*OVERSAMPLENR, 170},
+   {189*OVERSAMPLENR, 160},
+   {230*OVERSAMPLENR, 150},
+   {278*OVERSAMPLENR, 140},
+   {336*OVERSAMPLENR, 130},
+   {402*OVERSAMPLENR, 120},
+   {476*OVERSAMPLENR, 110},
+   {554*OVERSAMPLENR, 100},
+   {635*OVERSAMPLENR, 90},
+   {713*OVERSAMPLENR, 80},
+   {784*OVERSAMPLENR, 70},
+   {846*OVERSAMPLENR, 60},
+   {897*OVERSAMPLENR, 50},
+   {937*OVERSAMPLENR, 40},
+   {966*OVERSAMPLENR, 30},
+   {986*OVERSAMPLENR, 20},
+   {1000*OVERSAMPLENR, 10},
+   {1010*OVERSAMPLENR, 0}
 };
 #endif
 
 #if (THERMISTORHEATER_0 == 6) || (THERMISTORHEATER_1 == 6) || (THERMISTORHEATER_2 == 6) || (THERMISTORBED == 6) // 100k Epcos thermistor
 const short temptable_6[][2] PROGMEM = {
-   {28*OVERSAMPLENR, 250},
+   {1*OVERSAMPLENR, 350},
+   {28*OVERSAMPLENR, 250}, //top rating 250C
    {31*OVERSAMPLENR, 245},
    {35*OVERSAMPLENR, 240},
    {39*OVERSAMPLENR, 235},
@@ -264,7 +253,8 @@ const short temptable_6[][2] PROGMEM = {
 
 #if (THERMISTORHEATER_0 == 7) || (THERMISTORHEATER_1 == 7) || (THERMISTORHEATER_2 == 7) || (THERMISTORBED == 7) // 100k Honeywell 135-104LAG-J01
 const short temptable_7[][2] PROGMEM = {
-   {46*OVERSAMPLENR, 270},
+   {1*OVERSAMPLENR, 500},
+   {46*OVERSAMPLENR, 270}, //top rating 300C
    {50*OVERSAMPLENR, 265},
    {54*OVERSAMPLENR, 260},
    {58*OVERSAMPLENR, 255},
@@ -321,6 +311,150 @@ const short temptable_7[][2] PROGMEM = {
 };
 #endif
 
+#if (THERMISTORHEATER_0 == 51) || (THERMISTORHEATER_1 == 51) || (THERMISTORHEATER_2 == 51) || (THERMISTORBED == 51) 
+// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
+// Verified by linagee.
+// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
+// Advantage: Twice the resolution and better linearity from 150C to 200C
+const short temptable_51[][2] PROGMEM = {
+   {1*OVERSAMPLENR, 350},
+   {190*OVERSAMPLENR, 250}, //top rating 250C
+   {203*OVERSAMPLENR, 245},
+   {217*OVERSAMPLENR, 240},
+   {232*OVERSAMPLENR, 235},
+   {248*OVERSAMPLENR, 230},
+   {265*OVERSAMPLENR, 225},
+   {283*OVERSAMPLENR, 220},
+   {302*OVERSAMPLENR, 215},
+   {322*OVERSAMPLENR, 210},
+   {344*OVERSAMPLENR, 205},
+   {366*OVERSAMPLENR, 200},
+   {390*OVERSAMPLENR, 195},
+   {415*OVERSAMPLENR, 190},
+   {440*OVERSAMPLENR, 185},
+   {467*OVERSAMPLENR, 180},
+   {494*OVERSAMPLENR, 175},
+   {522*OVERSAMPLENR, 170},
+   {551*OVERSAMPLENR, 165},
+   {580*OVERSAMPLENR, 160},
+   {609*OVERSAMPLENR, 155},
+   {638*OVERSAMPLENR, 150},
+   {666*OVERSAMPLENR, 145},
+   {695*OVERSAMPLENR, 140},
+   {722*OVERSAMPLENR, 135},
+   {749*OVERSAMPLENR, 130},
+   {775*OVERSAMPLENR, 125},
+   {800*OVERSAMPLENR, 120},
+   {823*OVERSAMPLENR, 115},
+   {845*OVERSAMPLENR, 110},
+   {865*OVERSAMPLENR, 105},
+   {884*OVERSAMPLENR, 100},
+   {901*OVERSAMPLENR, 95},
+   {917*OVERSAMPLENR, 90},
+   {932*OVERSAMPLENR, 85},
+   {944*OVERSAMPLENR, 80},
+   {956*OVERSAMPLENR, 75},
+   {966*OVERSAMPLENR, 70},
+   {975*OVERSAMPLENR, 65},
+   {982*OVERSAMPLENR, 60},
+   {989*OVERSAMPLENR, 55},
+   {995*OVERSAMPLENR, 50},
+   {1000*OVERSAMPLENR, 45},
+   {1004*OVERSAMPLENR, 40},
+   {1007*OVERSAMPLENR, 35},
+   {1010*OVERSAMPLENR, 30},
+   {1013*OVERSAMPLENR, 25},
+   {1015*OVERSAMPLENR, 20},
+   {1017*OVERSAMPLENR, 15},
+   {1018*OVERSAMPLENR, 10},
+   {1019*OVERSAMPLENR, 5},
+   {1020*OVERSAMPLENR, 0},
+   {1021*OVERSAMPLENR, -5}
+};
+#endif
+
+#if (THERMISTORHEATER_0 == 52) || (THERMISTORHEATER_1 == 52) || (THERMISTORHEATER_2 == 52) || (THERMISTORBED == 52) 
+// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
+// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
+// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
+// Advantage: More resolution and better linearity from 150C to 200C
+const short temptable_52[][2] PROGMEM = {
+   {1*OVERSAMPLENR, 500},
+   {125*OVERSAMPLENR, 300}, //top rating 300C
+   {142*OVERSAMPLENR, 290},
+   {162*OVERSAMPLENR, 280},
+   {185*OVERSAMPLENR, 270},
+   {211*OVERSAMPLENR, 260},
+   {240*OVERSAMPLENR, 250},
+   {274*OVERSAMPLENR, 240},
+   {312*OVERSAMPLENR, 230},
+   {355*OVERSAMPLENR, 220},
+   {401*OVERSAMPLENR, 210},
+   {452*OVERSAMPLENR, 200},
+   {506*OVERSAMPLENR, 190},
+   {563*OVERSAMPLENR, 180},
+   {620*OVERSAMPLENR, 170},
+   {677*OVERSAMPLENR, 160},
+   {732*OVERSAMPLENR, 150},
+   {783*OVERSAMPLENR, 140},
+   {830*OVERSAMPLENR, 130},
+   {871*OVERSAMPLENR, 120},
+   {906*OVERSAMPLENR, 110},
+   {935*OVERSAMPLENR, 100},
+   {958*OVERSAMPLENR, 90},
+   {976*OVERSAMPLENR, 80},
+   {990*OVERSAMPLENR, 70},
+   {1000*OVERSAMPLENR, 60},
+   {1008*OVERSAMPLENR, 50},
+   {1013*OVERSAMPLENR, 40},
+   {1017*OVERSAMPLENR, 30},
+   {1019*OVERSAMPLENR, 20},
+   {1021*OVERSAMPLENR, 10},
+   {1022*OVERSAMPLENR, 0}
+};
+#endif
+
+#if (THERMISTORHEATER_0 == 55) || (THERMISTORHEATER_1 == 55) || (THERMISTORHEATER_2 == 55) || (THERMISTORBED == 55) 
+// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
+// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
+// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
+// Advantage: More resolution and better linearity from 150C to 200C
+const short temptable_52[][2] PROGMEM = {
+   {1*OVERSAMPLENR, 500},
+   {76*OVERSAMPLENR, 300},
+   {87*OVERSAMPLENR, 290},
+   {100*OVERSAMPLENR, 280},
+   {114*OVERSAMPLENR, 270},
+   {131*OVERSAMPLENR, 260},
+   {152*OVERSAMPLENR, 250},
+   {175*OVERSAMPLENR, 240},
+   {202*OVERSAMPLENR, 230},
+   {234*OVERSAMPLENR, 220},
+   {271*OVERSAMPLENR, 210},
+   {312*OVERSAMPLENR, 200},
+   {359*OVERSAMPLENR, 190},
+   {411*OVERSAMPLENR, 180},
+   {467*OVERSAMPLENR, 170},
+   {527*OVERSAMPLENR, 160},
+   {590*OVERSAMPLENR, 150},
+   {652*OVERSAMPLENR, 140},
+   {713*OVERSAMPLENR, 130},
+   {770*OVERSAMPLENR, 120},
+   {822*OVERSAMPLENR, 110},
+   {867*OVERSAMPLENR, 100},
+   {905*OVERSAMPLENR, 90},
+   {936*OVERSAMPLENR, 80},
+   {961*OVERSAMPLENR, 70},
+   {979*OVERSAMPLENR, 60},
+   {993*OVERSAMPLENR, 50},
+   {1003*OVERSAMPLENR, 40},
+   {1010*OVERSAMPLENR, 30},
+   {1015*OVERSAMPLENR, 20},
+   {1018*OVERSAMPLENR, 10},
+   {1020*OVERSAMPLENR, 0}
+};
+#endif
+
 #define _TT_NAME(_N) temptable_ ## _N
 #define TT_NAME(_N) _TT_NAME(_N)