Consistent punctuation in SanityCheck errors (PR#2283)

This commit is contained in:
Scott Lahteine 2015-06-11 22:24:46 -07:00 committed by Richard Wackerbarth
parent eb81982fcd
commit 6b1b3adaf0

View File

@ -96,13 +96,13 @@
*/ */
#ifdef MESH_BED_LEVELING #ifdef MESH_BED_LEVELING
#ifdef DELTA #ifdef DELTA
#error MESH_BED_LEVELING does not yet support DELTA printers #error MESH_BED_LEVELING does not yet support DELTA printers.
#endif #endif
#ifdef ENABLE_AUTO_BED_LEVELING #ifdef ENABLE_AUTO_BED_LEVELING
#error Select ENABLE_AUTO_BED_LEVELING or MESH_BED_LEVELING, not both #error Select ENABLE_AUTO_BED_LEVELING or MESH_BED_LEVELING, not both.
#endif #endif
#if MESH_NUM_X_POINTS > 7 || MESH_NUM_Y_POINTS > 7 #if MESH_NUM_X_POINTS > 7 || MESH_NUM_Y_POINTS > 7
#error MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS need to be less than 8 #error MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS need to be less than 8.
#endif #endif
#endif #endif
@ -129,23 +129,23 @@
*/ */
#if defined(Z_PROBE_ENDSTOP) #if defined(Z_PROBE_ENDSTOP)
#ifndef Z_PROBE_PIN #ifndef Z_PROBE_PIN
#error You must have a Z_PROBE_PIN defined in your pins_XXXX.h file if you enable Z_PROBE_ENDSTOP #error You must have a Z_PROBE_PIN defined in your pins_XXXX.h file if you enable Z_PROBE_ENDSTOP.
#endif #endif
#if Z_PROBE_PIN == -1 #if Z_PROBE_PIN == -1
#error You must set Z_PROBE_PIN to a valid pin if you enable Z_PROBE_ENDSTOP #error You must set Z_PROBE_PIN to a valid pin if you enable Z_PROBE_ENDSTOP.
#endif #endif
// Forcing Servo definitions can break some hall effect sensor setups. Leaving these here for further comment. // Forcing Servo definitions can break some hall effect sensor setups. Leaving these here for further comment.
// #ifndef NUM_SERVOS // #ifndef NUM_SERVOS
// #error You must have NUM_SERVOS defined and there must be at least 1 configured to use Z_PROBE_ENDSTOP // #error You must have NUM_SERVOS defined and there must be at least 1 configured to use Z_PROBE_ENDSTOP.
// #endif // #endif
// #if defined(NUM_SERVOS) && NUM_SERVOS < 1 // #if defined(NUM_SERVOS) && NUM_SERVOS < 1
// #error You must have at least 1 servo defined for NUM_SERVOS to use Z_PROBE_ENDSTOP // #error You must have at least 1 servo defined for NUM_SERVOS to use Z_PROBE_ENDSTOP.
// #endif // #endif
// #ifndef SERVO_ENDSTOPS // #ifndef SERVO_ENDSTOPS
// #error You must have SERVO_ENDSTOPS defined and have the Z index set to at least 0 or above to use Z_PROBE_ENDSTOP // #error You must have SERVO_ENDSTOPS defined and have the Z index set to at least 0 or above to use Z_PROBE_ENDSTOP.
// #endif // #endif
// #ifndef SERVO_ENDSTOP_ANGLES // #ifndef SERVO_ENDSTOP_ANGLES
// #error You must have SERVO_ENDSTOP_ANGLES defined for Z Extend and Retract to use Z_PROBE_AND_ENSTOP // #error You must have SERVO_ENDSTOP_ANGLES defined for Z Extend and Retract to use Z_PROBE_ENDSTOP.
// #endif // #endif
#endif #endif
/** /**
@ -176,7 +176,7 @@
#define X_PROBE_ERROR #define X_PROBE_ERROR
#endif #endif
#ifdef X_PROBE_ERROR #ifdef X_PROBE_ERROR
#error The X axis probing range is too small to fit all the points defined in AUTO_BED_LEVELING_GRID_POINTS #error The X axis probing range is too small to fit all the points defined in AUTO_BED_LEVELING_GRID_POINTS.
#endif #endif
#if Y_PROBE_OFFSET_FROM_EXTRUDER < 0 #if Y_PROBE_OFFSET_FROM_EXTRUDER < 0
#if PROBE_SIZE_Y <= -PROBE_AREA_DEPTH #if PROBE_SIZE_Y <= -PROBE_AREA_DEPTH
@ -186,7 +186,7 @@
#define Y_PROBE_ERROR #define Y_PROBE_ERROR
#endif #endif
#ifdef Y_PROBE_ERROR #ifdef Y_PROBE_ERROR
#error The Y axis probing range is too small to fit all the points defined in AUTO_BED_LEVELING_GRID_POINTS #error The Y axis probing range is too small to fit all the points defined in AUTO_BED_LEVELING_GRID_POINTS.
#endif #endif
#undef PROBE_SIZE_X #undef PROBE_SIZE_X
@ -272,18 +272,18 @@
*/ */
#if HAS_AUTO_FAN && HAS_FAN #if HAS_AUTO_FAN && HAS_FAN
#if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN #if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN
#error You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN #error You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN.
#elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN #elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN
#error You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN #error You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN.
#elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN #elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN
#error You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN #error You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN.
#elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN #elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN
#error You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN #error You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN.
#endif #endif
#endif #endif
#if HAS_FAN && CONTROLLERFAN_PIN == FAN_PIN #if HAS_FAN && CONTROLLERFAN_PIN == FAN_PIN
#error You cannot set CONTROLLERFAN_PIN equal to FAN_PIN #error You cannot set CONTROLLERFAN_PIN equal to FAN_PIN.
#endif #endif
/** /**
@ -291,38 +291,38 @@
*/ */
#if EXTRUDERS > 3 #if EXTRUDERS > 3
#if !HAS_HEATER_3 #if !HAS_HEATER_3
#error HEATER_3_PIN not defined for this board #error HEATER_3_PIN not defined for this board.
#endif #endif
#elif EXTRUDERS > 2 #elif EXTRUDERS > 2
#if !HAS_HEATER_2 #if !HAS_HEATER_2
#error HEATER_2_PIN not defined for this board #error HEATER_2_PIN not defined for this board.
#endif #endif
#elif EXTRUDERS > 1 || defined(HEATERS_PARALLEL) #elif EXTRUDERS > 1 || defined(HEATERS_PARALLEL)
#if !HAS_HEATER_1 #if !HAS_HEATER_1
#error HEATER_1_PIN not defined for this board #error HEATER_1_PIN not defined for this board.
#endif #endif
#endif #endif
#if !HAS_HEATER_0 #if !HAS_HEATER_0
#error HEATER_0_PIN not defined for this board #error HEATER_0_PIN not defined for this board.
#endif #endif
/** /**
* Warnings for old configurations * Warnings for old configurations
*/ */
#ifdef X_HOME_RETRACT_MM #ifdef X_HOME_RETRACT_MM
#error [XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM #error [XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM.
#endif #endif
#if WATCH_TEMP_PERIOD > 500 #if WATCH_TEMP_PERIOD > 500
#error WATCH_TEMP_PERIOD now uses seconds instead of milliseconds #error WATCH_TEMP_PERIOD now uses seconds instead of milliseconds.
#endif #endif
#if !defined(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD)) #if !defined(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
#error Thermal Runaway Protection for hotends must now be enabled with THERMAL_PROTECTION_HOTENDS #error Thermal Runaway Protection for hotends must now be enabled with THERMAL_PROTECTION_HOTENDS.
#endif #endif
#if !defined(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD) #if !defined(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
#error Thermal Runaway Protection for the bed must now be enabled with THERMAL_PROTECTION_BED #error Thermal Runaway Protection for the bed must now be enabled with THERMAL_PROTECTION_BED.
#endif #endif
#endif //SANITYCHECK_H #endif //SANITYCHECK_H