MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fix some compile warnings

Browse Source
This commit is contained in:
Scott Lahteine 2018-05-18 17:20:54 -05:00
parent af3a68f81f
commit 6f10d637ad
5 changed files with 16 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
Marlin/G26_Mesh_Validation_Tool.cpp
View File

@ -158,7 +158,7 @@
static int8_t g26_prime_flag;
#if ENABLED(NEWPANEL)
#if ENABLED(ULTIPANEL)
/**
* If the LCD is clicked, cancel, wait for release, return true
@ -242,7 +242,7 @@
*/
inline bool prime_nozzle() {
#if ENABLED(NEWPANEL)
#if ENABLED(ULTIPANEL)
float Total_Prime = 0.0;
if (g26_prime_flag == -1) { // The user wants to control how much filament gets purged
@ -389,7 +389,7 @@
for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) {
for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) {
#if ENABLED(NEWPANEL)
#if ENABLED(ULTIPANEL)
if (user_canceled()) return true; // Check if the user wants to stop the Mesh Validation
#endif
@ -480,14 +480,14 @@
if (g26_bed_temp > 25) {
lcd_setstatusPGM(PSTR("G26 Heating Bed."), 99);
lcd_quick_feedback(true);
#if ENABLED(NEWPANEL)
#if ENABLED(ULTIPANEL)
lcd_external_control = true;
#endif
#endif
thermalManager.setTargetBed(g26_bed_temp);
while (ABS(thermalManager.degBed() - g26_bed_temp) > 3) {
#if ENABLED(NEWPANEL)
#if ENABLED(ULTIPANEL)
if (is_lcd_clicked()) return exit_from_g26();
#endif
@ -510,7 +510,7 @@
thermalManager.setTargetHotend(g26_hotend_temp, 0);
while (ABS(thermalManager.degHotend(0) - g26_hotend_temp) > 3) {
#if ENABLED(NEWPANEL)
#if ENABLED(ULTIPANEL)
if (is_lcd_clicked()) return exit_from_g26();
#endif
@ -623,7 +623,7 @@
if (parser.seen('P')) {
if (!parser.has_value()) {
#if ENABLED(NEWPANEL)
#if ENABLED(ULTIPANEL)
g26_prime_flag = -1;
#else
SERIAL_PROTOCOLLNPGM("?Prime length must be specified when not using an LCD.");
@ -668,7 +668,7 @@
}
int16_t g26_repeats;
#if ENABLED(NEWPANEL)
#if ENABLED(ULTIPANEL)
g26_repeats = parser.intval('R', GRID_MAX_POINTS + 1);
#else
if (!parser.seen('R')) {
@ -727,7 +727,7 @@
move_to(destination, 0.0);
move_to(destination, g26_ooze_amount);
#if ENABLED(NEWPANEL)
#if ENABLED(ULTIPANEL)
lcd_external_control = true;
#endif
@ -835,7 +835,7 @@
plan_arc(endpoint, arc_offset, false); // Draw a counter-clockwise arc
feedrate_mm_s = save_feedrate;
set_destination_from_current();
#if ENABLED(NEWPANEL)
#if ENABLED(ULTIPANEL)
if (user_canceled()) goto LEAVE; // Check if the user wants to stop the Mesh Validation
#endif
@ -861,7 +861,7 @@
for (int8_t ind = start_ind; ind <= end_ind; ind++) {
#if ENABLED(NEWPANEL)
#if ENABLED(ULTIPANEL)
if (user_canceled()) goto LEAVE; // Check if the user wants to stop the Mesh Validation
#endif
@ -910,7 +910,7 @@
move_to(destination, 0); // Move back to the starting position
//debug_current_and_destination(PSTR("done doing X/Y move."));
#if ENABLED(NEWPANEL)
#if ENABLED(ULTIPANEL)
lcd_external_control = false; // Give back control of the LCD Panel!
#endif

2
Marlin/Marlin_main.cpp
View File

@ -7940,7 +7940,7 @@ inline void gcode_M105() {
}
#endif // EXTRA_FAN_SPEED
const uint16_t s = parser.ushortval('S', 255);
fanSpeeds[p] = MIN(s, 255);
fanSpeeds[p] = MIN(s, 255U);
}
}

2
Marlin/endstop_interrupts.h
View File

@ -76,7 +76,7 @@ volatile uint8_t e_hit = 0; // Different from 0 when the endstops should be test
// Must be reset to 0 by the test function when finished.
// Install Pin change interrupt for a pin. Can be called multiple times.
void pciSetup(byte pin) {
void pciSetup(const int8_t pin) {
SBI(*digitalPinToPCMSK(pin), digitalPinToPCMSKbit(pin)); // enable pin
SBI(PCIFR, digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
SBI(PCICR, digitalPinToPCICRbit(pin)); // enable interrupt for the group

2
Marlin/pins_ANET_10.h
View File

@ -89,7 +89,7 @@
*/
#ifndef __AVR_ATmega1284P__
#error "Oops! Make sure you have 'Anet V1.0', 'Anet V1.0 (Optiboot)' or 'Sanguino' selected from the 'Tools -> Boards' menu."
#error "Oops! Make sure you have 'Anet V1.0', 'Anet V1.0 (Optiboot)' or 'Sanguino' selected in the 'Tools -> Boards' menu and ATmega1284P selected in 'Tools -> Processor' menu."
#endif
#ifndef BOARD_NAME

2
Marlin/ultralcd.cpp
View File

@ -3323,7 +3323,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
lcd_completion_feedback();
}
#if ENABLED(EEPROM_SETTINGS)
#if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS)
static void lcd_init_eeprom() {
lcd_completion_feedback(settings.init_eeprom());