Cleanup configurations

This commit is contained in:
Scott Lahteine 2017-04-28 17:49:18 -05:00
parent 8bf3a3fcdb
commit 7db805930a
6 changed files with 109 additions and 114 deletions

View File

@ -534,7 +534,7 @@
* =========================================================================== * ===========================================================================
* ============================= Z Probe Options ============================= * ============================= Z Probe Options =============================
* =========================================================================== * ===========================================================================
* @section probes * @section probes
* *
* *
* Probe Type * Probe Type

View File

@ -293,6 +293,7 @@
#define HEATER_1_MAXTEMP 245 #define HEATER_1_MAXTEMP 245
#define HEATER_2_MAXTEMP 245 #define HEATER_2_MAXTEMP 245
#define HEATER_3_MAXTEMP 245 #define HEATER_3_MAXTEMP 245
#define HEATER_4_MAXTEMP 245
#define BED_MAXTEMP 115 #define BED_MAXTEMP 115
//=========================================================================== //===========================================================================
@ -322,6 +323,11 @@
#define DEFAULT_Ki 0.50 #define DEFAULT_Ki 0.50
#define DEFAULT_Kd 60.00 #define DEFAULT_Kd 60.00
// Ultimaker
//#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
@ -562,7 +568,6 @@
*/ */
//#define FIX_MOUNTED_PROBE //#define FIX_MOUNTED_PROBE
/** /**
* Z Servo Probe, such as an endstop switch on a rotating arm. * Z Servo Probe, such as an endstop switch on a rotating arm.
* NUM_SERVOS also needs to be set. This is found later in this file. Set it to * NUM_SERVOS also needs to be set. This is found later in this file. Set it to
@ -578,7 +583,7 @@
* with the possible exception of Z_ENDSTOP_SERVO_NR. * with the possible exception of Z_ENDSTOP_SERVO_NR.
*/ */
//#define BLTOUCH //#define BLTOUCH
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event //#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are turned off during probe event
/** /**
@ -601,7 +606,7 @@
// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. // Enable if you have a Z probe mounted on a sled like those designed by Charles Bell.
//#define Z_PROBE_SLED //#define Z_PROBE_SLED
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
/** /**
* Z Probe to nozzle (X,Y) offset, relative to (0, 0). * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
@ -630,8 +635,10 @@
#define XY_PROBE_SPEED 7500 #define XY_PROBE_SPEED 7500
// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) // Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
// Speed for the "accurate" probe of each point // Speed for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
// Use double touch for probing // Use double touch for probing
//#define PROBE_DOUBLE_TOUCH //#define PROBE_DOUBLE_TOUCH
@ -693,7 +700,6 @@
*/ */
//#define Z_MIN_PROBE_ENDSTOP //#define Z_MIN_PROBE_ENDSTOP
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
// Enable Z Probe Repeatability test to see how accurate your probe is // Enable Z Probe Repeatability test to see how accurate your probe is
@ -770,7 +776,6 @@
#define Y_HOME_DIR -1 #define Y_HOME_DIR -1
#define Z_HOME_DIR -1 #define Z_HOME_DIR -1
// @section machine // @section machine
// Travel limits after homing (units are in mm) // Travel limits after homing (units are in mm)
@ -803,7 +808,6 @@
//=========================================================================== //===========================================================================
//=============================== Bed Leveling ============================== //=============================== Bed Leveling ==============================
//=========================================================================== //===========================================================================
// @section bedlevel // @section bedlevel
/** /**
@ -850,7 +854,6 @@
#define AUTO_BED_LEVELING_UBL #define AUTO_BED_LEVELING_UBL
//#define MESH_BED_LEVELING //#define MESH_BED_LEVELING
/** /**
* Enable detailed logging of G28, G29, M48, etc. * Enable detailed logging of G28, G29, M48, etc.
* Turn on with the command 'M111 S32'. * Turn on with the command 'M111 S32'.
@ -901,7 +904,6 @@
// 3 arbitrary points to probe. // 3 arbitrary points to probe.
// A simple cross-product is used to estimate the plane of the bed. // A simple cross-product is used to estimate the plane of the bed.
#define ABL_PROBE_PT_1_X 39 #define ABL_PROBE_PT_1_X 39
#define ABL_PROBE_PT_1_Y 170 #define ABL_PROBE_PT_1_Y 170
#define ABL_PROBE_PT_2_X 39 #define ABL_PROBE_PT_2_X 39
@ -917,16 +919,17 @@
//========================= Unified Bed Leveling ============================ //========================= Unified Bed Leveling ============================
//=========================================================================== //===========================================================================
#define UBL_MESH_INSET 1 // Mesh inset margin on print area #define UBL_MESH_INSET 1 // Mesh inset margin on print area
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y 10 #define GRID_MAX_POINTS_Y 10
#define UBL_PROBE_PT_1_X 45 // These set the probe locations for when UBL does a 3-Point leveling #define UBL_PROBE_PT_1_X 45 // These set the probe locations for when UBL does a 3-Point leveling
#define UBL_PROBE_PT_1_Y 170 // of the mesh. #define UBL_PROBE_PT_1_Y 170 // of the mesh.
#define UBL_PROBE_PT_2_X 45 #define UBL_PROBE_PT_2_X 45
#define UBL_PROBE_PT_2_Y 25 #define UBL_PROBE_PT_2_Y 25
#define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_X 180
#define UBL_PROBE_PT_3_Y 25 #define UBL_PROBE_PT_3_Y 25
#define UBL_G26_MESH_EDITING // Enable G26 mesh editing #define UBL_G26_MESH_EDITING // Enable G26 mesh editing
#elif ENABLED(MESH_BED_LEVELING) #elif ENABLED(MESH_BED_LEVELING)
//=========================================================================== //===========================================================================
@ -1606,7 +1609,7 @@
*/ */
//#define FILAMENT_WIDTH_SENSOR //#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR) #if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3) #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)

View File

@ -327,7 +327,7 @@
// Default x offset in duplication mode (typically set to half print bed width) // Default x offset in duplication mode (typically set to half print bed width)
#define DEFAULT_DUPLICATION_X_OFFSET 100 #define DEFAULT_DUPLICATION_X_OFFSET 100
#endif //DUAL_X_CARRIAGE #endif // DUAL_X_CARRIAGE
// Activate a solenoid on the active extruder with M380. Disable all with M381. // Activate a solenoid on the active extruder with M380. Disable all with M381.
// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. // Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
@ -419,7 +419,6 @@
* M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
*/ */
//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) //#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
@ -587,10 +586,9 @@
*/ */
#define BABYSTEPPING #define BABYSTEPPING
#if ENABLED(BABYSTEPPING) #if ENABLED(BABYSTEPPING)
#define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
//not implemented for deltabots! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
#define BABYSTEP_INVERT_Z false //true for inverse movements in Z #define BABYSTEP_MULTIPLICATOR 2 // Babysteps are very small. Increase for faster motion.
#define BABYSTEP_MULTIPLICATOR 2 //faster movements
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
@ -1034,7 +1032,6 @@
* (https://github.com/ameyer/Arduino-L6470) * (https://github.com/ameyer/Arduino-L6470)
*/ */
//#define HAVE_L6470DRIVER //#define HAVE_L6470DRIVER
#if ENABLED(HAVE_L6470DRIVER) #if ENABLED(HAVE_L6470DRIVER)
@ -1155,7 +1152,6 @@
*/ */
//#define EXTENDED_CAPABILITIES_REPORT //#define EXTENDED_CAPABILITIES_REPORT
/** /**
* Volumetric extrusion default state * Volumetric extrusion default state
* Activate to make volumetric extrusion the default method, * Activate to make volumetric extrusion the default method,

View File

@ -130,7 +130,7 @@
// The following define selects which electronics board you have. // The following define selects which electronics board you have.
// Please choose the name from boards.h that matches your setup // Please choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD #ifndef MOTHERBOARD
//#define MOTHERBOARD BOARD_RAMPS_14_EEF //#define MOTHERBOARD BOARD_RAMPS_14_EEF
#define MOTHERBOARD BOARD_RAMPS_14_EFB // gMax users please note: This is a Roxy modification. I print on glass and #define MOTHERBOARD BOARD_RAMPS_14_EFB // gMax users please note: This is a Roxy modification. I print on glass and
// I use Marlin to control the bed's temperature. So, if you have a single nozzle // I use Marlin to control the bed's temperature. So, if you have a single nozzle
// machine, this will work fine for you. You just set the // machine, this will work fine for you. You just set the
@ -327,14 +327,14 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// gMax J-Head // gMax J-Head
#define DEFAULT_Kp 15.35 #define DEFAULT_Kp 15.35
#define DEFAULT_Ki 0.85 #define DEFAULT_Ki 0.85
#define DEFAULT_Kd 69.45 #define DEFAULT_Kd 69.45
// Ultimaker // Ultimaker
// #define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
// #define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
// #define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
@ -474,7 +474,7 @@
#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
// Enable this feature if all enabled endstop pins are interrupt-capable. // Enable this feature if all enabled endstop pins are interrupt-capable.
// This will remove the need to poll the interrupt pins, saving many CPU cycles. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
@ -548,7 +548,7 @@
* =========================================================================== * ===========================================================================
* ============================= Z Probe Options ============================= * ============================= Z Probe Options =============================
* =========================================================================== * ===========================================================================
* @section probes * @section probes
* *
* *
* Probe Type * Probe Type
@ -730,8 +730,6 @@
#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points #define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points
//
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset
#define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MIN -20
#define Z_PROBE_OFFSET_RANGE_MAX 20 #define Z_PROBE_OFFSET_RANGE_MAX 20
@ -792,9 +790,9 @@
#define X_MIN_POS 0 #define X_MIN_POS 0
#define Y_MIN_POS 0 #define Y_MIN_POS 0
#define Z_MIN_POS 0 #define Z_MIN_POS 0
#define X_MAX_POS 420 // These numbers are not accurate for an unaltered gMax 1.5+ printer. My print bed #define X_MAX_POS 420 // These numbers are not accurate for an unaltered gMax 1.5+ printer. My print bed
#define Y_MAX_POS 420 // is inset a noticable amount from the edge of the bed. Combined with the inset, #define Y_MAX_POS 420 // is inset a noticable amount from the edge of the bed. Combined with the inset,
// the nozzle can reach all cordinates of the mesh. // the nozzle can reach all cordinates of the mesh.
#define Z_MAX_POS 500 #define Z_MAX_POS 500
// If enabled, axes won't move below MIN_POS in response to movement commands. // If enabled, axes won't move below MIN_POS in response to movement commands.
@ -994,8 +992,8 @@
#define Z_SAFE_HOMING #define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING) #if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT (((X_MIN_POS+X_MAX_POS)/2)-4) // X point for Z homing when homing all axis (G28). #define Z_SAFE_HOMING_X_POINT (((X_MIN_POS + X_MAX_POS) / 2) - 4) // X point for Z homing when homing all axis (G28).
#define Z_SAFE_HOMING_Y_POINT (((Y_MIN_POS+Y_MAX_POS)/2)+4) // Y point for Z homing when homing all axis (G28). #define Z_SAFE_HOMING_Y_POINT (((Y_MIN_POS + Y_MAX_POS) / 2) + 4) // Y point for Z homing when homing all axis (G28).
#endif #endif
// Homing speeds (mm/m) // Homing speeds (mm/m)
@ -1035,7 +1033,7 @@
// //
// M100 Free Memory Watcher // M100 Free Memory Watcher
// //
#define M100_FREE_MEMORY_WATCHER // uncomment to add the M100 Free Memory Watcher for debug purpose //#define M100_FREE_MEMORY_WATCHER // uncomment to add the M100 Free Memory Watcher for debug purpose
// //
// G20/G21 Inch mode support // G20/G21 Inch mode support
@ -1619,7 +1617,7 @@
*/ */
//#define FILAMENT_WIDTH_SENSOR //#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR) #if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3) #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
@ -1633,6 +1631,6 @@
// Display filament width on the LCD status line. Status messages will expire after 5 seconds. // Display filament width on the LCD status line. Status messages will expire after 5 seconds.
//#define FILAMENT_LCD_DISPLAY //#define FILAMENT_LCD_DISPLAY
#endif //FILAMENT_WIDTH_SENSOR #endif
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

View File

@ -361,7 +361,7 @@
// Default stepper release if idle. Set to 0 to deactivate. // Default stepper release if idle. Set to 0 to deactivate.
// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. // Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
// Time can be set by M18 and M84. // Time can be set by M18 and M84.
#define DEFAULT_STEPPER_DEACTIVE_TIME 0 // usually is set to 120 seconds #define DEFAULT_STEPPER_DEACTIVE_TIME 0 // usually set to 120 seconds
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished.

View File

@ -39,72 +39,70 @@
// Width: 112, Height: 64 // Width: 112, Height: 64
const unsigned char custom_start_bmp[896] PROGMEM = { const unsigned char custom_start_bmp[896] PROGMEM = {
0xff, 0xff, 0xff, 0xff, 0xfe, 0x00, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x00, 0x3f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0x00, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0x00, 0x00, 0x00, 0x31, 0x00, 0x00, 0x01, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x00, 0x00, 0x00, 0x31, 0x00, 0x00, 0x01, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0x00, 0x00, 0x01, 0xf9, 0x00, 0x00, 0x03, 0xf8, 0x00, 0x00, 0x01, 0xc0, 0x01, 0x80, 0x00, 0x00, 0x01, 0xf9, 0x00, 0x00, 0x03, 0xf8, 0x00, 0x00, 0x01, 0xc0, 0x01,
0x80, 0x00, 0x00, 0x06, 0x4d, 0x00, 0x00, 0x07, 0x38, 0x00, 0x00, 0x01, 0xc0, 0x01, 0x80, 0x00, 0x00, 0x06, 0x4d, 0x00, 0x00, 0x07, 0x38, 0x00, 0x00, 0x01, 0xc0, 0x01,
0x80, 0x00, 0x00, 0x0c, 0x26, 0x00, 0x0e, 0xe7, 0x39, 0xd3, 0xe1, 0xf3, 0xe7, 0xc1, 0x80, 0x00, 0x00, 0x0c, 0x26, 0x00, 0x0e, 0xe7, 0x39, 0xd3, 0xe1, 0xf3, 0xe7, 0xc1,
0x80, 0x00, 0x00, 0x19, 0x12, 0x00, 0x0f, 0xe7, 0x39, 0xf7, 0xf3, 0xfb, 0xef, 0xe1, 0x80, 0x00, 0x00, 0x19, 0x12, 0x00, 0x0f, 0xe7, 0x39, 0xf7, 0xf3, 0xfb, 0xef, 0xe1,
0x80, 0x00, 0x00, 0x37, 0xce, 0x00, 0x0e, 0xe7, 0x01, 0xf7, 0x73, 0xb9, 0xce, 0xe1, 0x80, 0x00, 0x00, 0x37, 0xce, 0x00, 0x0e, 0xe7, 0x01, 0xf7, 0x73, 0xb9, 0xce, 0xe1,
0x80, 0x00, 0x00, 0x64, 0x66, 0x00, 0x0e, 0xe7, 0x01, 0xc7, 0xf3, 0xb9, 0xcf, 0xe1, 0x80, 0x00, 0x00, 0x64, 0x66, 0x00, 0x0e, 0xe7, 0x01, 0xc7, 0xf3, 0xb9, 0xcf, 0xe1,
0x80, 0x00, 0x00, 0x4b, 0xa6, 0x00, 0x0e, 0xe7, 0x39, 0xc7, 0xf0, 0xf9, 0xcf, 0xe1, 0x80, 0x00, 0x00, 0x4b, 0xa6, 0x00, 0x0e, 0xe7, 0x39, 0xc7, 0xf0, 0xf9, 0xcf, 0xe1,
0x80, 0x00, 0x00, 0xca, 0xb4, 0x00, 0x0f, 0xe7, 0x39, 0xc7, 0x03, 0xf9, 0xce, 0x01, 0x80, 0x00, 0x00, 0xca, 0xb4, 0x00, 0x0f, 0xe7, 0x39, 0xc7, 0x03, 0xf9, 0xce, 0x01,
0x80, 0x00, 0x00, 0xcd, 0xa4, 0x00, 0x06, 0xe7, 0x39, 0xc7, 0x73, 0xb9, 0xce, 0xe1, 0x80, 0x00, 0x00, 0xcd, 0xa4, 0x00, 0x06, 0xe7, 0x39, 0xc7, 0x73, 0xb9, 0xce, 0xe1,
0x80, 0x00, 0x03, 0xa6, 0x6c, 0x00, 0x00, 0xe7, 0x39, 0xc7, 0x73, 0xb9, 0xce, 0xe1, 0x80, 0x00, 0x03, 0xa6, 0x6c, 0x00, 0x00, 0xe7, 0x39, 0xc7, 0x73, 0xb9, 0xce, 0xe1,
0x80, 0x00, 0xff, 0x13, 0xd8, 0x00, 0x0e, 0xe3, 0xf1, 0xc7, 0xf3, 0xf9, 0xef, 0xe1, 0x80, 0x00, 0xff, 0x13, 0xd8, 0x00, 0x0e, 0xe3, 0xf1, 0xc7, 0xf3, 0xf9, 0xef, 0xe1,
0x80, 0x01, 0x21, 0x88, 0x18, 0x00, 0x0f, 0xe1, 0xe1, 0xc3, 0xe1, 0xb9, 0xe7, 0xc1, 0x80, 0x01, 0x21, 0x88, 0x18, 0x00, 0x0f, 0xe1, 0xe1, 0xc3, 0xe1, 0xb9, 0xe7, 0xc1,
0x80, 0x06, 0x61, 0x16, 0x30, 0x00, 0x07, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x06, 0x61, 0x16, 0x30, 0x00, 0x07, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0x04, 0x41, 0x23, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x04, 0x41, 0x23, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0x04, 0xfe, 0x41, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x04, 0xfe, 0x41, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0x0b, 0x86, 0x8f, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x1f, 0x80, 0x00, 0x00, 0x01, 0x80, 0x0b, 0x86, 0x8f, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x1f, 0x80, 0x00, 0x00, 0x01,
0x80, 0x1e, 0x01, 0x9a, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x1f, 0x80, 0x00, 0x00, 0x01, 0x80, 0x1e, 0x01, 0x9a, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x1f, 0x80, 0x00, 0x00, 0x01,
0x80, 0x1c, 0x07, 0x22, 0x00, 0x00, 0x07, 0xbc, 0x3f, 0x9f, 0x81, 0xf8, 0xf1, 0xe1, 0x80, 0x1c, 0x07, 0x22, 0x00, 0x00, 0x07, 0xbc, 0x3f, 0x9f, 0x81, 0xf8, 0xf1, 0xe1,
0x80, 0x08, 0x1f, 0xe2, 0x00, 0x00, 0x0f, 0xfc, 0x3f, 0xbf, 0x87, 0xfe, 0x71, 0xc1, 0x80, 0x08, 0x1f, 0xe2, 0x00, 0x00, 0x0f, 0xfc, 0x3f, 0xbf, 0x87, 0xfe, 0x71, 0xc1,
0x80, 0x00, 0x33, 0x62, 0x00, 0x00, 0x0f, 0x3c, 0x3d, 0xb7, 0x87, 0x9e, 0x7b, 0xc1, 0x80, 0x00, 0x33, 0x62, 0x00, 0x00, 0x0f, 0x3c, 0x3d, 0xb7, 0x87, 0x9e, 0x7b, 0xc1,
0x80, 0x00, 0xc2, 0x22, 0x00, 0x00, 0x0f, 0x3c, 0x3d, 0xb7, 0x87, 0x9e, 0x7b, 0xc1, 0x80, 0x00, 0xc2, 0x22, 0x00, 0x00, 0x0f, 0x3c, 0x3d, 0xb7, 0x87, 0x9e, 0x7b, 0xc1,
0x80, 0x00, 0xc2, 0x3e, 0x00, 0x00, 0x0f, 0x3c, 0x3d, 0xf7, 0x80, 0x7e, 0x3b, 0x81, 0x80, 0x00, 0xc2, 0x3e, 0x00, 0x00, 0x0f, 0x3c, 0x3d, 0xf7, 0x80, 0x7e, 0x3b, 0x81,
0x80, 0x01, 0xe6, 0x1e, 0x00, 0x00, 0x0f, 0x3c, 0x3d, 0xf7, 0x83, 0xfe, 0x3f, 0x81, 0x80, 0x01, 0xe6, 0x1e, 0x00, 0x00, 0x0f, 0x3c, 0x3d, 0xf7, 0x83, 0xfe, 0x3f, 0x81,
0x80, 0x01, 0x3c, 0x12, 0x00, 0x00, 0x0f, 0x3c, 0x3d, 0xf7, 0x87, 0x9e, 0x3b, 0x81, 0x80, 0x01, 0x3c, 0x12, 0x00, 0x00, 0x0f, 0x3c, 0x3d, 0xf7, 0x87, 0x9e, 0x3b, 0x81,
0x80, 0x01, 0x1c, 0x26, 0x00, 0x00, 0x0f, 0xfc, 0x3d, 0xf7, 0x87, 0x9e, 0x7b, 0xc1, 0x80, 0x01, 0x1c, 0x26, 0x00, 0x00, 0x0f, 0xfc, 0x3d, 0xf7, 0x87, 0x9e, 0x7b, 0xc1,
0x80, 0x01, 0x70, 0x64, 0x00, 0x00, 0x07, 0xbc, 0x3c, 0xe7, 0x87, 0x9e, 0x7b, 0xc1, 0x80, 0x01, 0x70, 0x64, 0x00, 0x00, 0x07, 0xbc, 0x3c, 0xe7, 0x87, 0x9e, 0x7b, 0xc1,
0x80, 0x03, 0xc0, 0x58, 0x00, 0x00, 0x00, 0x3c, 0x3c, 0xe7, 0x87, 0xfe, 0x71, 0xc1, 0x80, 0x03, 0xc0, 0x58, 0x00, 0x00, 0x00, 0x3c, 0x3c, 0xe7, 0x87, 0xfe, 0x71, 0xc1,
0x80, 0x0d, 0x80, 0xf0, 0x00, 0x00, 0x0f, 0x3c, 0x3c, 0xe7, 0x83, 0xde, 0xf1, 0xe1, 0x80, 0x0d, 0x80, 0xf0, 0x00, 0x00, 0x0f, 0x3c, 0x3c, 0xe7, 0x83, 0xde, 0xf1, 0xe1,
0x80, 0x1a, 0x00, 0xe0, 0x00, 0x00, 0x0f, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x1a, 0x00, 0xe0, 0x00, 0x00, 0x0f, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0x26, 0x00, 0x40, 0x00, 0x00, 0x03, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x26, 0x00, 0x40, 0x00, 0x00, 0x03, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0x4c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0x4c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x80, 0xb2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x80, 0xb2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x81, 0x06, 0x00, 0x00, 0x00, 0x00, 0x07, 0x1c, 0x03, 0xc0, 0x20, 0x10, 0x00, 0x01, 0x81, 0x06, 0x00, 0x00, 0x00, 0x00, 0x07, 0x1c, 0x03, 0xc0, 0x20, 0x10, 0x00, 0x01,
0x83, 0x24, 0x00, 0x00, 0x00, 0x00, 0x08, 0x92, 0x02, 0x20, 0x00, 0x10, 0x00, 0x01, 0x83, 0x24, 0x00, 0x00, 0x00, 0x00, 0x08, 0x92, 0x02, 0x20, 0x00, 0x10, 0x00, 0x01,
0x02, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x91, 0x02, 0x23, 0x27, 0x39, 0x8c, 0xe1, 0x02, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x91, 0x02, 0x23, 0x27, 0x39, 0x8c, 0xe1,
0x06, 0x38, 0x00, 0x00, 0x00, 0x00, 0x03, 0x11, 0x03, 0xc2, 0x24, 0x92, 0x49, 0x01, 0x06, 0x38, 0x00, 0x00, 0x00, 0x00, 0x03, 0x11, 0x03, 0xc2, 0x24, 0x92, 0x49, 0x01,
0x04, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x91, 0x02, 0x02, 0x24, 0x93, 0xc8, 0xc1, 0x04, 0x50, 0x00, 0x00, 0x00, 0x00, 0x00, 0x91, 0x02, 0x02, 0x24, 0x93, 0xc8, 0xc1,
0x0d, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x08, 0x92, 0x02, 0x02, 0x24, 0x92, 0x08, 0x21, 0x0d, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x08, 0x92, 0x02, 0x02, 0x24, 0x92, 0x08, 0x21,
0x08, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x07, 0x1c, 0x02, 0x02, 0x24, 0x99, 0xc9, 0xc1, 0x08, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x07, 0x1c, 0x02, 0x02, 0x24, 0x99, 0xc9, 0xc1,
0x18, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x18, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x10, 0x30, 0x00, 0x1c, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x0f, 0xe0, 0x0f, 0x00, 0x01, 0x10, 0x30, 0x00, 0x1c, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x0f, 0xe0, 0x0f, 0x00, 0x01,
0x30, 0x20, 0x00, 0x37, 0x00, 0x00, 0x00, 0x12, 0x24, 0x08, 0x10, 0x09, 0x00, 0x01, 0x30, 0x20, 0x00, 0x37, 0x00, 0x00, 0x00, 0x12, 0x24, 0x08, 0x10, 0x09, 0x00, 0x01,
0x20, 0x30, 0x00, 0x6d, 0x80, 0x00, 0x00, 0x12, 0x24, 0x09, 0x88, 0x09, 0x00, 0x01, 0x20, 0x30, 0x00, 0x6d, 0x80, 0x00, 0x00, 0x12, 0x24, 0x09, 0x88, 0x09, 0x00, 0x01,
0x10, 0x18, 0x1f, 0x60, 0xc0, 0x00, 0x00, 0x12, 0x24, 0x09, 0x48, 0x09, 0x00, 0x01, 0x10, 0x18, 0x1f, 0x60, 0xc0, 0x00, 0x00, 0x12, 0x24, 0x09, 0x48, 0x09, 0x00, 0x01,
0x30, 0x0c, 0x39, 0xe0, 0x60, 0x00, 0x00, 0x12, 0x24, 0x09, 0x90, 0x09, 0x00, 0x01, 0x30, 0x0c, 0x39, 0xe0, 0x60, 0x00, 0x00, 0x12, 0x24, 0x09, 0x90, 0x09, 0x00, 0x01,
0x30, 0x07, 0x90, 0x70, 0x60, 0x00, 0x00, 0x12, 0x24, 0x08, 0x60, 0x09, 0x00, 0x01, 0x30, 0x07, 0x90, 0x70, 0x60, 0x00, 0x00, 0x12, 0x24, 0x08, 0x60, 0x09, 0x00, 0x01,
0x10, 0x16, 0xf0, 0x18, 0x20, 0x00, 0x00, 0x12, 0x24, 0x08, 0x10, 0x09, 0x00, 0x01, 0x10, 0x16, 0xf0, 0x18, 0x20, 0x00, 0x00, 0x12, 0x24, 0x08, 0x10, 0x09, 0x00, 0x01,
0x1a, 0x10, 0x60, 0x08, 0x30, 0x00, 0x00, 0x12, 0x24, 0x09, 0xc8, 0x09, 0x00, 0x01, 0x1a, 0x10, 0x60, 0x08, 0x30, 0x00, 0x00, 0x12, 0x24, 0x09, 0xc8, 0x09, 0x00, 0x01,
0x0b, 0x09, 0x80, 0x00, 0x30, 0x00, 0x00, 0x12, 0x24, 0x09, 0x24, 0x09, 0x00, 0x01, 0x0b, 0x09, 0x80, 0x00, 0x30, 0x00, 0x00, 0x12, 0x24, 0x09, 0x24, 0x09, 0x00, 0x01,
0x0e, 0x07, 0x80, 0x00, 0x10, 0x00, 0x00, 0x13, 0xe4, 0x89, 0xc4, 0x89, 0xf9, 0x01, 0x0e, 0x07, 0x80, 0x00, 0x10, 0x00, 0x00, 0x13, 0xe4, 0x89, 0xc4, 0x89, 0xf9, 0x01,
0x06, 0x1e, 0x40, 0x10, 0x10, 0x00, 0x00, 0x10, 0x05, 0xc8, 0x09, 0xc8, 0x0b, 0x81, 0x06, 0x1e, 0x40, 0x10, 0x10, 0x00, 0x00, 0x10, 0x05, 0xc8, 0x09, 0xc8, 0x0b, 0x81,
0x06, 0x00, 0x40, 0x20, 0x10, 0x00, 0x00, 0x0f, 0xf8, 0x8f, 0xf0, 0x8f, 0xf9, 0x01, 0x06, 0x00, 0x40, 0x20, 0x10, 0x00, 0x00, 0x0f, 0xf8, 0x8f, 0xf0, 0x8f, 0xf9, 0x01,
0x03, 0x80, 0x00, 0x20, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x80, 0x00, 0x20, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x01, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x01, 0xff, 0xff, 0xff, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
}; };