Merge pull request #1 from ErikDeBruijn/Marlin_v1_Ultimaker-rc3

Marlin v1 ultimaker rc3
This commit is contained in:
daid 2012-05-09 01:35:59 -07:00
commit 830972ce3c
4 changed files with 26 additions and 9 deletions

View File

@ -108,6 +108,9 @@
//this prevents dangerous Extruder moves, i.e. if the temperature is under the limit //this prevents dangerous Extruder moves, i.e. if the temperature is under the limit
//can be software-disabled for whatever purposes by //can be software-disabled for whatever purposes by
#define PREVENT_DANGEROUS_EXTRUDE #define PREVENT_DANGEROUS_EXTRUDE
//if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately.
#define PREVENT_LENGTHY_EXTRUDE
#define EXTRUDE_MINTEMP 170 #define EXTRUDE_MINTEMP 170
#define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances. #define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.

View File

@ -10,11 +10,20 @@
#define LANGUAGE_CHOICE 1 // Pick your language from the list above #define LANGUAGE_CHOICE 1 // Pick your language from the list above
#define PROTOCOL_VERSION "1.0"
#ifdef MOTHERBOARD == 7
#define MACHINE_NAME "Ultimaker"
#define FIRMWARE_URL "http://firmware.ultimaker.com"
#else
#define MACHINE_NAME "Mendel"
#define FIRMWARE_URL "http://www.mendel-parts.com"
#endif
#if LANGUAGE_CHOICE == 1 #if LANGUAGE_CHOICE == 1
// LCD Menu Messages // LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME " Ready."
#define WELCOME_MSG "Printer Ready."
#define MSG_SD_INSERTED "Card inserted" #define MSG_SD_INSERTED "Card inserted"
#define MSG_SD_REMOVED "Card removed" #define MSG_SD_REMOVED "Card removed"
#define MSG_MAIN " Main \003" #define MSG_MAIN " Main \003"
@ -63,8 +72,8 @@
#define MSG_MAIN_WIDE " Main \003" #define MSG_MAIN_WIDE " Main \003"
#define MSG_TEMPERATURE_WIDE " Temperature \x7E" #define MSG_TEMPERATURE_WIDE " Temperature \x7E"
#define MSG_MOTION_WIDE " Motion \x7E" #define MSG_MOTION_WIDE " Motion \x7E"
#define MSG_STORE_EPROM " Store EPROM" #define MSG_STORE_EPROM " Store memory"
#define MSG_LOAD_EPROM " Load EPROM" #define MSG_LOAD_EPROM " Load memory"
#define MSG_RESTORE_FAILSAFE " Restore Failsafe" #define MSG_RESTORE_FAILSAFE " Restore Failsafe"
#define MSG_REFRESH "\004Refresh" #define MSG_REFRESH "\004Refresh"
#define MSG_WATCH " Watch \003" #define MSG_WATCH " Watch \003"
@ -76,7 +85,7 @@
#define MSG_CARD_MENU " Card Menu \x7E" #define MSG_CARD_MENU " Card Menu \x7E"
#define MSG_NO_CARD " No Card" #define MSG_NO_CARD " No Card"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure." #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
#define MSG_DWELL "DWELL..." #define MSG_DWELL "Sleep..."
#define MSG_NO_MOVE "No move." #define MSG_NO_MOVE "No move."
#define MSG_PART_RELEASE "Partial Release" #define MSG_PART_RELEASE "Partial Release"
#define MSG_KILLED "KILLED. " #define MSG_KILLED "KILLED. "
@ -94,7 +103,7 @@
#define MSG_BROWNOUT_RESET " Brown out Reset" #define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_WATCHDOG_RESET " Watchdog Reset" #define MSG_WATCHDOG_RESET " Watchdog Reset"
#define MSG_SOFTWARE_RESET " Software Reset" #define MSG_SOFTWARE_RESET " Software Reset"
#define MSG_MARLIN "Marlin: " #define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Author: " #define MSG_AUTHOR " | Author: "
#define MSG_CONFIGURATION_VER " Last Updated: " #define MSG_CONFIGURATION_VER " Last Updated: "
#define MSG_FREE_MEMORY " Free Memory: " #define MSG_FREE_MEMORY " Free Memory: "
@ -116,7 +125,7 @@
#define MSG_HEATING_COMPLETE "Heating done." #define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating." #define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done." #define MSG_BED_DONE "Bed done."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:1\n"
#define MSG_COUNT_X " Count X:" #define MSG_COUNT_X " Count X:"
#define MSG_ERR_KILLED "Printer halted. kill() called !!" #define MSG_ERR_KILLED "Printer halted. kill() called !!"
#define MSG_ERR_STOPPED "Printer stopped deu to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)" #define MSG_ERR_STOPPED "Printer stopped deu to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)"
@ -157,7 +166,7 @@
// LCD Menu Messages // LCD Menu Messages
#define WELCOME_MSG "UltiMARLIN Ready." #define WELCOME_MSG MACHINE_NAME " Ready."
#define MSG_SD_INSERTED "Card inserted" #define MSG_SD_INSERTED "Card inserted"
#define MSG_SD_REMOVED "Card removed" #define MSG_SD_REMOVED "Card removed"
@ -263,7 +272,7 @@
#define MSG_HEATING_COMPLETE "Heating done." #define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating." #define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done." #define MSG_BED_DONE "Bed done."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:\n"
#define MSG_COUNT_X " Count X:" #define MSG_COUNT_X " Count X:"
#define MSG_ERR_KILLED "Printer halted. kill() called !!" #define MSG_ERR_KILLED "Printer halted. kill() called !!"
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!" #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"

View File

@ -495,6 +495,7 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP); SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP);
} }
#ifdef PREVENT_LENGTHY_EXTRUDE
if(labs(target[E_AXIS]-position[E_AXIS])>axis_steps_per_unit[E_AXIS]*EXTRUDE_MAXLENGTH) if(labs(target[E_AXIS]-position[E_AXIS])>axis_steps_per_unit[E_AXIS]*EXTRUDE_MAXLENGTH)
{ {
position[E_AXIS]=target[E_AXIS]; //behave as if the move really took place, but ignore E part position[E_AXIS]=target[E_AXIS]; //behave as if the move really took place, but ignore E part
@ -502,6 +503,7 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP); SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP);
} }
#endif #endif
#endif
// Prepare to set up new block // Prepare to set up new block
block_t *block = &block_buffer[block_buffer_head]; block_t *block = &block_buffer[block_buffer_head];

View File

@ -1,3 +1,5 @@
#include "language.h"
#include "temperature.h"
#include "ultralcd.h" #include "ultralcd.h"
#ifdef ULTRA_LCD #ifdef ULTRA_LCD
#include "Marlin.h" #include "Marlin.h"
@ -708,6 +710,7 @@ void MainMenu::showAxisMove()
} }
break; break;
case ItemAM_E: case ItemAM_E:
// ErikDB: TODO: this length should be changed for volumetric.
MENUITEM( lcdprintPGM(MSG_EXTRUDE) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E5");beepshort(); ) ; MENUITEM( lcdprintPGM(MSG_EXTRUDE) , BLOCK;enquecommand("G92 E0");enquecommand("G1 F700 E5");beepshort(); ) ;
break; break;
default: default: