Macros to the top, a few HAS_* macros
This commit is contained in:
Scott Lahteine
parent
fd1ea9d56f
commit
864dddc878
@ -37,6 +37,36 @@
|
||||
|
||||
#include "Sd2PinMap.h"
|
||||
|
||||
//===========================================================================
|
||||
//================================== macros =================================
|
||||
//===========================================================================
|
||||
|
||||
#if EXTRUDERS > 4
|
||||
#error Unsupported number of extruders
|
||||
#elif EXTRUDERS > 3
|
||||
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3, v4 }
|
||||
#elif EXTRUDERS > 2
|
||||
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3 }
|
||||
#elif EXTRUDERS > 1
|
||||
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2 }
|
||||
#else
|
||||
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1 }
|
||||
#endif
|
||||
|
||||
#define PIN_EXISTS(PIN) (defined(PIN) && PIN >= 0)
|
||||
#define HAS_TEMP_0 PIN_EXISTS(TEMP_0_PIN)
|
||||
#define HAS_TEMP_1 PIN_EXISTS(TEMP_1_PIN)
|
||||
#define HAS_TEMP_2 PIN_EXISTS(TEMP_2_PIN)
|
||||
#define HAS_TEMP_3 PIN_EXISTS(TEMP_3_PIN)
|
||||
#define HAS_TEMP_BED PIN_EXISTS(TEMP_BED_PIN)
|
||||
#define HAS_FILAMENT_SENSOR (defined(FILAMENT_SENSOR) && PIN_EXISTS(FILWIDTH_PIN))
|
||||
#define HAS_HEATER_0 PIN_EXISTS(HEATER_0_PIN)
|
||||
#define HAS_HEATER_1 PIN_EXISTS(HEATER_1_PIN)
|
||||
#define HAS_HEATER_2 PIN_EXISTS(HEATER_2_PIN)
|
||||
#define HAS_HEATER_3 PIN_EXISTS(HEATER_3_PIN)
|
||||
#define HAS_HEATER_BED PIN_EXISTS(HEATER_BED_PIN)
|
||||
#define HAS_AUTO_FAN PIN_EXISTS(EXTRUDER_0_AUTO_FAN_PIN) || PIN_EXISTS(EXTRUDER_1_AUTO_FAN_PIN) || \
|
||||
PIN_EXISTS(EXTRUDER_2_AUTO_FAN_PIN) || PIN_EXISTS(EXTRUDER_3_AUTO_FAN_PIN)
|
||||
|
||||
//===========================================================================
|
||||
//============================= public variables ============================
|
||||
@ -117,24 +147,11 @@ static volatile bool temp_meas_ready = false;
|
||||
#ifdef FAN_SOFT_PWM
|
||||
static unsigned char soft_pwm_fan;
|
||||
#endif
|
||||
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
|
||||
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
|
||||
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1)
|
||||
#if PIN_EXISTS(EXTRUDER_0_AUTO_FAN_PIN) || PIN_EXISTS(EXTRUDER_1_AUTO_FAN_PIN) || \
|
||||
PIN_EXISTS(EXTRUDER_2_AUTO_FAN_PIN) || PIN_EXISTS(EXTRUDER_3_AUTO_FAN_PIN)
|
||||
static unsigned long extruder_autofan_last_check;
|
||||
#endif
|
||||
|
||||
#if EXTRUDERS > 4
|
||||
#error Unsupported number of extruders
|
||||
#elif EXTRUDERS > 3
|
||||
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3, v4 }
|
||||
#elif EXTRUDERS > 2
|
||||
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3 }
|
||||
#elif EXTRUDERS > 1
|
||||
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2 }
|
||||
#else
|
||||
#define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1 }
|
||||
#endif
|
||||
|
||||
#ifdef PIDTEMP
|
||||
#ifdef PID_PARAMS_PER_EXTRUDER
|
||||
float Kp[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Kp, DEFAULT_Kp, DEFAULT_Kp, DEFAULT_Kp);
|
||||
@ -192,13 +209,6 @@ static void updateTemperaturesFromRawValues();
|
||||
static int read_max6675();
|
||||
#endif
|
||||
|
||||
#define HAS_TEMP_0 (defined(TEMP_0_PIN) && TEMP_0_PIN > -1)
|
||||
#define HAS_TEMP_1 (defined(TEMP_1_PIN) && TEMP_1_PIN > -1)
|
||||
#define HAS_TEMP_2 (defined(TEMP_2_PIN) && TEMP_2_PIN > -1)
|
||||
#define HAS_TEMP_3 (defined(TEMP_3_PIN) && TEMP_3_PIN > -1)
|
||||
#define HAS_TEMP_BED (defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1)
|
||||
#define HAS_FILAMENT_SENSOR (defined(FILAMENT_SENSOR) && defined(FILWIDTH_PIN) && FILWIDTH_PIN > -1)
|
||||
|
||||
//===========================================================================
|
||||
//============================= functions ============================
|
||||
//===========================================================================
|
||||
@ -217,10 +227,8 @@ void PID_autotune(float temp, int extruder, int ncycles)
|
||||
float Kp, Ki, Kd;
|
||||
float max = 0, min = 10000;
|
||||
|
||||
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
|
||||
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
|
||||
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1) || \
|
||||
(defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1)
|
||||
#if PIN_EXISTS(EXTRUDER_0_AUTO_FAN_PIN) || PIN_EXISTS(EXTRUDER_1_AUTO_FAN_PIN) || \
|
||||
PIN_EXISTS(EXTRUDER_2_AUTO_FAN_PIN) || PIN_EXISTS(EXTRUDER_3_AUTO_FAN_PIN)
|
||||
unsigned long extruder_autofan_last_check = temp_millis;
|
||||
#endif
|
||||
|
||||
@ -255,10 +263,8 @@ void PID_autotune(float temp, int extruder, int ncycles)
|
||||
max = max(max, input);
|
||||
min = min(min, input);
|
||||
|
||||
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
|
||||
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
|
||||
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1) || \
|
||||
(defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1)
|
||||
#if PIN_EXISTS(EXTRUDER_0_AUTO_FAN_PIN) || PIN_EXISTS(EXTRUDER_1_AUTO_FAN_PIN) || \
|
||||
PIN_EXISTS(EXTRUDER_2_AUTO_FAN_PIN) || PIN_EXISTS(EXTRUDER_3_AUTO_FAN_PIN)
|
||||
if (ms > extruder_autofan_last_check + 2500) {
|
||||
checkExtruderAutoFans();
|
||||
extruder_autofan_last_check = ms;
|
||||
@ -336,7 +342,7 @@ void PID_autotune(float temp, int extruder, int ncycles)
|
||||
return;
|
||||
}
|
||||
// Every 2 seconds...
|
||||
if (ms - temp_millis > 2000) {
|
||||
if (ms > temp_millis + 2000) {
|
||||
int p;
|
||||
if (extruder < 0) {
|
||||
p = soft_pwm_bed;
|
||||
@ -381,11 +387,10 @@ int getHeaterPower(int heater) {
|
||||
return heater < 0 ? soft_pwm_bed : soft_pwm[heater];
|
||||
}
|
||||
|
||||
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
|
||||
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
|
||||
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1)
|
||||
#if PIN_EXISTS(EXTRUDER_0_AUTO_FAN_PIN) || PIN_EXISTS(EXTRUDER_1_AUTO_FAN_PIN) || \
|
||||
PIN_EXISTS(EXTRUDER_2_AUTO_FAN_PIN)
|
||||
|
||||
#if defined(FAN_PIN) && FAN_PIN > -1
|
||||
#if PIN_EXISTS(FAN_PIN)
|
||||
#if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN
|
||||
#error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN"
|
||||
#endif
|
||||
@ -411,11 +416,11 @@ void checkExtruderAutoFans()
|
||||
uint8_t fanState = 0;
|
||||
|
||||
// which fan pins need to be turned on?
|
||||
#if defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1
|
||||
#if PIN_EXISTS(EXTRUDER_0_AUTO_FAN_PIN)
|
||||
if (current_temperature[0] > EXTRUDER_AUTO_FAN_TEMPERATURE)
|
||||
fanState |= 1;
|
||||
#endif
|
||||
#if defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1
|
||||
#if PIN_EXISTS(EXTRUDER_1_AUTO_FAN_PIN)
|
||||
if (current_temperature[1] > EXTRUDER_AUTO_FAN_TEMPERATURE)
|
||||
{
|
||||
if (EXTRUDER_1_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
|
||||
@ -424,7 +429,7 @@ void checkExtruderAutoFans()
|
||||
fanState |= 2;
|
||||
}
|
||||
#endif
|
||||
#if defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1
|
||||
#if PIN_EXISTS(EXTRUDER_2_AUTO_FAN_PIN)
|
||||
if (current_temperature[2] > EXTRUDER_AUTO_FAN_TEMPERATURE)
|
||||
{
|
||||
if (EXTRUDER_2_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
|
||||
@ -435,7 +440,7 @@ void checkExtruderAutoFans()
|
||||
fanState |= 4;
|
||||
}
|
||||
#endif
|
||||
#if defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1
|
||||
#if PIN_EXISTS(EXTRUDER_3_AUTO_FAN_PIN)
|
||||
if (current_temperature[3] > EXTRUDER_AUTO_FAN_TEMPERATURE)
|
||||
{
|
||||
if (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
|
||||
@ -450,19 +455,19 @@ void checkExtruderAutoFans()
|
||||
#endif
|
||||
|
||||
// update extruder auto fan states
|
||||
#if defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1
|
||||
#if PIN_EXISTS(EXTRUDER_0_AUTO_FAN_PIN)
|
||||
setExtruderAutoFanState(EXTRUDER_0_AUTO_FAN_PIN, (fanState & 1) != 0);
|
||||
#endif
|
||||
#if defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1
|
||||
#if PIN_EXISTS(EXTRUDER_1_AUTO_FAN_PIN)
|
||||
if (EXTRUDER_1_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN)
|
||||
setExtruderAutoFanState(EXTRUDER_1_AUTO_FAN_PIN, (fanState & 2) != 0);
|
||||
#endif
|
||||
#if defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1
|
||||
#if PIN_EXISTS(EXTRUDER_2_AUTO_FAN_PIN)
|
||||
if (EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN
|
||||
&& EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
|
||||
setExtruderAutoFanState(EXTRUDER_2_AUTO_FAN_PIN, (fanState & 4) != 0);
|
||||
#endif
|
||||
#if defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1
|
||||
#if PIN_EXISTS(EXTRUDER_3_AUTO_FAN_PIN)
|
||||
if (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN
|
||||
&& EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN
|
||||
&& EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_2_AUTO_FAN_PIN)
|
||||
@ -475,22 +480,22 @@ void checkExtruderAutoFans()
|
||||
//
|
||||
// Error checking and Write Routines
|
||||
//
|
||||
#if !defined(HEATER_0_PIN) || HEATER_0_PIN < 0
|
||||
#if !HAS_HEATER_0
|
||||
#error HEATER_0_PIN not defined for this board
|
||||
#endif
|
||||
#define WRITE_HEATER_0P(v) WRITE(HEATER_0_PIN, v)
|
||||
#if EXTRUDERS > 1 || defined(HEATERS_PARALLEL)
|
||||
#if !defined(HEATER_1_PIN) || HEATER_1_PIN < 0
|
||||
#if !HAS_HEATER_1
|
||||
#error HEATER_1_PIN not defined for this board
|
||||
#endif
|
||||
#define WRITE_HEATER_1(v) WRITE(HEATER_1_PIN, v)
|
||||
#if EXTRUDERS > 2
|
||||
#if !defined(HEATER_2_PIN) || HEATER_2_PIN < 0
|
||||
#if !HAS_HEATER_2
|
||||
#error HEATER_2_PIN not defined for this board
|
||||
#endif
|
||||
#define WRITE_HEATER_2(v) WRITE(HEATER_2_PIN, v)
|
||||
#if EXTRUDERS > 3
|
||||
#if !defined(HEATER_3_PIN) || HEATER_3_PIN < 0
|
||||
#if !HAS_HEATER_3
|
||||
#error HEATER_3_PIN not defined for this board
|
||||
#endif
|
||||
#define WRITE_HEATER_3(v) WRITE(HEATER_3_PIN, v)
|
||||
@ -502,7 +507,7 @@ void checkExtruderAutoFans()
|
||||
#else
|
||||
#define WRITE_HEATER_0(v) WRITE_HEATER_0P(v)
|
||||
#endif
|
||||
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
||||
#if HAS_HEATER_BED
|
||||
#define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN, v)
|
||||
#endif
|
||||
|
||||
@ -626,9 +631,8 @@ void manage_heater() {
|
||||
|
||||
} // Extruders Loop
|
||||
|
||||
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
|
||||
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
|
||||
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1)
|
||||
#if PIN_EXISTS(EXTRUDER_0_AUTO_FAN_PIN) || PIN_EXISTS(EXTRUDER_1_AUTO_FAN_PIN) || \
|
||||
PIN_EXISTS(EXTRUDER_2_AUTO_FAN_PIN) || PIN_EXISTS(EXTRUDER_3_AUTO_FAN_PIN)
|
||||
if (ms > extruder_autofan_last_check + 2500) { // only need to check fan state very infrequently
|
||||
checkExtruderAutoFans();
|
||||
extruder_autofan_last_check = ms;
|
||||
@ -680,7 +684,7 @@ void manage_heater() {
|
||||
#elif !defined(BED_LIMIT_SWITCHING)
|
||||
// Check if temperature is within the correct range
|
||||
if (current_temperature_bed > BED_MINTEMP && current_temperature_bed < BED_MAXTEMP) {
|
||||
soft_pwm_bed = current_temperature_bed >= target_temperature_bed ? 0 : MAX_BED_POWER >> 1;
|
||||
soft_pwm_bed = current_temperature_bed < target_temperature_bed ? MAX_BED_POWER >> 1 : 0;
|
||||
}
|
||||
else {
|
||||
soft_pwm_bed = 0;
|
||||
@ -798,13 +802,11 @@ static float analog2tempBed(int raw) {
|
||||
|
||||
/* Called to get the raw values into the the actual temperatures. The raw values are created in interrupt context,
|
||||
and this function is called from normal context as it is too slow to run in interrupts and will block the stepper routine otherwise */
|
||||
static void updateTemperaturesFromRawValues()
|
||||
{
|
||||
static void updateTemperaturesFromRawValues() {
|
||||
#ifdef HEATER_0_USES_MAX6675
|
||||
current_temperature_raw[0] = read_max6675();
|
||||
#endif
|
||||
for(uint8_t e=0;e<EXTRUDERS;e++)
|
||||
{
|
||||
for(uint8_t e = 0; e < EXTRUDERS; e++) {
|
||||
current_temperature[e] = analog2temp(current_temperature_raw[e], e);
|
||||
}
|
||||
current_temperature_bed = analog2tempBed(current_temperature_bed_raw);
|
||||
@ -867,22 +869,22 @@ void tp_init()
|
||||
#endif //PIDTEMPBED
|
||||
}
|
||||
|
||||
#if defined(HEATER_0_PIN) && (HEATER_0_PIN > -1)
|
||||
#if HAS_HEATER_0
|
||||
SET_OUTPUT(HEATER_0_PIN);
|
||||
#endif
|
||||
#if defined(HEATER_1_PIN) && (HEATER_1_PIN > -1)
|
||||
#if HAS_HEATER_1
|
||||
SET_OUTPUT(HEATER_1_PIN);
|
||||
#endif
|
||||
#if defined(HEATER_2_PIN) && (HEATER_2_PIN > -1)
|
||||
#if HAS_HEATER_2
|
||||
SET_OUTPUT(HEATER_2_PIN);
|
||||
#endif
|
||||
#if defined(HEATER_3_PIN) && (HEATER_3_PIN > -1)
|
||||
#if HAS_HEATER_3
|
||||
SET_OUTPUT(HEATER_3_PIN);
|
||||
#endif
|
||||
#if defined(HEATER_BED_PIN) && (HEATER_BED_PIN > -1)
|
||||
#if HAS_HEATER_BED
|
||||
SET_OUTPUT(HEATER_BED_PIN);
|
||||
#endif
|
||||
#if defined(FAN_PIN) && (FAN_PIN > -1)
|
||||
#if PIN_EXISTS(FAN_PIN)
|
||||
SET_OUTPUT(FAN_PIN);
|
||||
#ifdef FAST_PWM_FAN
|
||||
setPwmFrequency(FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
|
||||
@ -1130,7 +1132,7 @@ void disable_heater() {
|
||||
#if HAS_TEMP_BED
|
||||
target_temperature_bed = 0;
|
||||
soft_pwm_bed = 0;
|
||||
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
||||
#if HAS_HEATER_BED
|
||||
WRITE_HEATER_BED(LOW);
|
||||
#endif
|
||||
#endif
|
||||
@ -1163,7 +1165,7 @@ void min_temp_error(uint8_t e) {
|
||||
}
|
||||
|
||||
void bed_max_temp_error(void) {
|
||||
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
||||
#if HAS_HEATER_BED
|
||||
WRITE_HEATER_BED(0);
|
||||
#endif
|
||||
if (IsStopped() == false) {
|
||||
@ -1232,6 +1234,9 @@ void bed_max_temp_error(void) {
|
||||
|
||||
#endif //HEATER_0_USES_MAX6675
|
||||
|
||||
/**
|
||||
* Stages in the ISR loop
|
||||
*/
|
||||
enum TempState {
|
||||
PrepareTemp_0,
|
||||
MeasureTemp_0,
|
||||
@ -1284,7 +1289,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
||||
#if HAS_HEATER_BED
|
||||
ISR_STATICS(BED);
|
||||
#endif
|
||||
|
||||
@ -1316,7 +1321,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
||||
#if HAS_HEATER_BED
|
||||
soft_pwm_BED = soft_pwm_bed;
|
||||
WRITE_HEATER_BED(soft_pwm_BED > 0 ? 1 : 0);
|
||||
#endif
|
||||
@ -1337,7 +1342,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
||||
#if HAS_HEATER_BED
|
||||
if (soft_pwm_BED < pwm_count) WRITE_HEATER_BED(0);
|
||||
#endif
|
||||
|
||||
@ -1398,7 +1403,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
||||
#if HAS_HEATER_BED
|
||||
_SLOW_PWM_ROUTINE(BED, soft_pwm_bed); // BED
|
||||
#endif
|
||||
|
||||
@ -1414,7 +1419,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
|
||||
#if HAS_HEATER_BED
|
||||
PWM_OFF_ROUTINE(BED); // BED
|
||||
#endif
|
||||
|
||||
@ -1445,7 +1450,7 @@ ISR(TIMER0_COMPB_vect) {
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1 // BED
|
||||
#if HAS_HEATER_BED
|
||||
if (state_timer_heater_BED > 0) state_timer_heater_BED--;
|
||||
#endif
|
||||
} // (pwm_count % 64) == 0
|
||||
|
||||
Loading…
Reference in New Issue
Block a user