Merge pull request #7368 from thinkyhead/bf_fix_warnings

Patch to fix some compiler warnings
This commit is contained in:
Scott Lahteine 2017-07-28 02:53:13 -05:00 committed by GitHub
commit 8b0bd44b1e
3 changed files with 23 additions and 16 deletions

View File

@ -1014,7 +1014,7 @@ void servo_init() {
#if ENABLED(NEOPIXEL_RGBW_LED)
const uint32_t color = pixels.Color(r, g, b, w);
static int nextLed = 0;
static uint16_t nextLed = 0;
if (!isSequence)
set_neopixel_color(color);
@ -5602,12 +5602,14 @@ void home_all_axes() { gcode_G28(true); }
bool G38_pass_fail = false;
// Get direction of move and retract
float retract_mm[XYZ];
LOOP_XYZ(i) {
float dist = destination[i] - current_position[i];
retract_mm[i] = FABS(dist) < G38_MINIMUM_MOVE ? 0 : home_bump_mm((AxisEnum)i) * (dist > 0 ? -1 : 1);
}
#if ENABLED(PROBE_DOUBLE_TOUCH)
// Get direction of move and retract
float retract_mm[XYZ];
LOOP_XYZ(i) {
float dist = destination[i] - current_position[i];
retract_mm[i] = FABS(dist) < G38_MINIMUM_MOVE ? 0 : home_bump_mm((AxisEnum)i) * (dist > 0 ? -1 : 1);
}
#endif
stepper.synchronize(); // wait until the machine is idle
@ -5671,7 +5673,7 @@ void home_all_axes() { gcode_G28(true); }
// If any axis has enough movement, do the move
LOOP_XYZ(i)
if (FABS(destination[i] - current_position[i]) >= G38_MINIMUM_MOVE) {
if (!parser.seenval('F')) feedrate_mm_s = homing_feedrate(i);
if (!parser.seenval('F')) feedrate_mm_s = homing_feedrate((AxisEnum)i);
// If G38.2 fails throw an error
if (!G38_run_probe() && is_38_2) {
SERIAL_ERROR_START();

View File

@ -88,13 +88,15 @@ static void PCA9632_WriteAllRegisters(const byte addr, const byte regadd, const
Wire.endTransmission();
}
static byte PCA9632_ReadRegister(const byte addr, const byte regadd) {
Wire.beginTransmission(addr);
Wire.write(regadd);
const byte value = Wire.read();
Wire.endTransmission();
return value;
}
#if 0
static byte PCA9632_ReadRegister(const byte addr, const byte regadd) {
Wire.beginTransmission(addr);
Wire.write(regadd);
const byte value = Wire.read();
Wire.endTransmission();
return value;
}
#endif
void PCA9632_SetColor(const byte r, const byte g, const byte b) {
if (!PCA_init) {

View File

@ -1838,7 +1838,6 @@ void kill_screen(const char* lcd_msg) {
void _lcd_ubl_level_bed();
static int16_t ubl_storage_slot = 0,
custom_bed_temp = 50,
custom_hotend_temp = 190,
side_points = 3,
ubl_fillin_amount = 5,
@ -1847,6 +1846,10 @@ void kill_screen(const char* lcd_msg) {
x_plot = 0,
y_plot = 0;
#if HAS_TEMP_BED
static int16_t custom_bed_temp = 50;
#endif
/**
* UBL Build Custom Mesh Command
*/