diff --git a/Marlin/language.h b/Marlin/language.h index 6079ba7b0..774593963 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -1,1485 +1,1485 @@ -#ifndef LANGUAGE_H -#define LANGUAGE_H - -// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES -// -// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" -// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS - -// Languages -// 1 English -// 2 Polish -// 3 French (awaiting translation!) -// 4 German -// 5 Spanish -// 6 Russian -// 7 Italian -// 8 Portuguese -// 9 Finnish - -#ifndef LANGUAGE_CHOICE -#define LANGUAGE_CHOICE 1 // Pick your language from the list above -#endif - -#define PROTOCOL_VERSION "1.0" - -#if MOTHERBOARD == 7 || MOTHERBOARD == 71 - #define MACHINE_NAME "Ultimaker" - #define FIRMWARE_URL "http://firmware.ultimaker.com" -#elif MOTHERBOARD == 80 - #define MACHINE_NAME "Rumba" - #define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/" -#else - #define MACHINE_NAME "Mendel" - #define FIRMWARE_URL "http://www.mendel-parts.com" -#endif - -#define STRINGIFY_(n) #n -#define STRINGIFY(n) STRINGIFY_(n) - -#if LANGUAGE_CHOICE == 1 - -// LCD Menu Messages - #define WELCOME_MSG MACHINE_NAME " Ready." - #define MSG_SD_INSERTED "Card inserted" - #define MSG_SD_REMOVED "Card removed" - #define MSG_MAIN "Main" - #define MSG_AUTOSTART "Autostart" - #define MSG_DISABLE_STEPPERS "Disable Steppers" - #define MSG_AUTO_HOME "Auto Home" - #define MSG_SET_ORIGIN "Set Origin" - #define MSG_PREHEAT_PLA "Preheat PLA" - #define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf" - #define MSG_PREHEAT_ABS "Preheat ABS" - #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf" - #define MSG_COOLDOWN "Cooldown" - #define MSG_EXTRUDE "Extrude" - #define MSG_RETRACT "Retract" - #define MSG_MOVE_AXIS "Move Axis" - #define MSG_SPEED "Speed" - #define MSG_NOZZLE "Nozzle" - #define MSG_NOZZLE1 "Nozzle2" - #define MSG_NOZZLE2 "Nozzle3" - #define MSG_BED "Bed" - #define MSG_FAN_SPEED "Fan speed" - #define MSG_FLOW "Flow" - #define MSG_CONTROL "Control" - #define MSG_MIN " \002 Min" - #define MSG_MAX " \002 Max" - #define MSG_FACTOR " \002 Fact" - #define MSG_AUTOTEMP "Autotemp" - #define MSG_ON "On " - #define MSG_OFF "Off" - #define MSG_PID_P "PID-P" - #define MSG_PID_I "PID-I" - #define MSG_PID_D "PID-D" - #define MSG_PID_C "PID-C" - #define MSG_ACC "Accel" +#ifndef LANGUAGE_H +#define LANGUAGE_H + +// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES +// +// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" +// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS + +// Languages +// 1 English +// 2 Polish +// 3 French +// 4 German +// 5 Spanish +// 6 Russian +// 7 Italian +// 8 Portuguese +// 9 Finnish + +#ifndef LANGUAGE_CHOICE +#define LANGUAGE_CHOICE 1 // Pick your language from the list above +#endif + +#define PROTOCOL_VERSION "1.0" + +#if MOTHERBOARD == 7 || MOTHERBOARD == 71 + #define MACHINE_NAME "Ultimaker" + #define FIRMWARE_URL "http://firmware.ultimaker.com" +#elif MOTHERBOARD == 80 + #define MACHINE_NAME "Rumba" + #define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/" +#else + #define MACHINE_NAME "Mendel" + #define FIRMWARE_URL "http://www.mendel-parts.com" +#endif + +#define STRINGIFY_(n) #n +#define STRINGIFY(n) STRINGIFY_(n) + +#if LANGUAGE_CHOICE == 1 + +// LCD Menu Messages + #define WELCOME_MSG MACHINE_NAME " Ready." + #define MSG_SD_INSERTED "Card inserted" + #define MSG_SD_REMOVED "Card removed" + #define MSG_MAIN "Main" + #define MSG_AUTOSTART "Autostart" + #define MSG_DISABLE_STEPPERS "Disable Steppers" + #define MSG_AUTO_HOME "Auto Home" + #define MSG_SET_ORIGIN "Set Origin" + #define MSG_PREHEAT_PLA "Preheat PLA" + #define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf" + #define MSG_PREHEAT_ABS "Preheat ABS" + #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf" + #define MSG_COOLDOWN "Cooldown" + #define MSG_EXTRUDE "Extrude" + #define MSG_RETRACT "Retract" + #define MSG_MOVE_AXIS "Move Axis" + #define MSG_SPEED "Speed" + #define MSG_NOZZLE "Nozzle" + #define MSG_NOZZLE1 "Nozzle2" + #define MSG_NOZZLE2 "Nozzle3" + #define MSG_BED "Bed" + #define MSG_FAN_SPEED "Fan speed" + #define MSG_FLOW "Flow" + #define MSG_CONTROL "Control" + #define MSG_MIN " \002 Min" + #define MSG_MAX " \002 Max" + #define MSG_FACTOR " \002 Fact" + #define MSG_AUTOTEMP "Autotemp" + #define MSG_ON "On " + #define MSG_OFF "Off" + #define MSG_PID_P "PID-P" + #define MSG_PID_I "PID-I" + #define MSG_PID_D "PID-D" + #define MSG_PID_C "PID-C" + #define MSG_ACC "Accel" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" - #define MSG_VMAX "Vmax " - #define MSG_X "x" - #define MSG_Y "y" - #define MSG_Z "z" - #define MSG_E "e" - #define MSG_VMIN "Vmin" - #define MSG_VTRAV_MIN "VTrav min" - #define MSG_AMAX "Amax " - #define MSG_A_RETRACT "A-retract" - #define MSG_XSTEPS "Xsteps/mm" - #define MSG_YSTEPS "Ysteps/mm" - #define MSG_ZSTEPS "Zsteps/mm" - #define MSG_ESTEPS "Esteps/mm" - #define MSG_RECTRACT "Rectract" - #define MSG_TEMPERATURE "Temperature" - #define MSG_MOTION "Motion" - #define MSG_STORE_EPROM "Store memory" - #define MSG_LOAD_EPROM "Load memory" - #define MSG_RESTORE_FAILSAFE "Restore Failsafe" - #define MSG_REFRESH "Refresh" - #define MSG_WATCH "Info screen" - #define MSG_PREPARE "Prepare" - #define MSG_TUNE "Tune" - #define MSG_PAUSE_PRINT "Pause Print" - #define MSG_RESUME_PRINT "Resume Print" - #define MSG_STOP_PRINT "Stop Print" - #define MSG_CARD_MENU "Print from SD" - #define MSG_NO_CARD "No Card" - #define MSG_DWELL "Sleep..." - #define MSG_USERWAIT "Wait for user..." - #define MSG_RESUMING "Resuming print" - #define MSG_NO_MOVE "No move." - #define MSG_KILLED "KILLED. " - #define MSG_STOPPED "STOPPED. " - #define MSG_CONTROL_RETRACT "Retract mm" - #define MSG_CONTROL_RETRACTF "Retract F" - #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" - #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" - #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" - #define MSG_AUTORETRACT "AutoRetr." - #define MSG_FILAMENTCHANGE "Change filament" - #define MSG_INIT_SDCARD "Init. SD-Card" - #define MSG_CNG_SDCARD "Change SD-Card" - -// Serial Console Messages - - #define MSG_Enqueing "enqueing \"" - #define MSG_POWERUP "PowerUp" - #define MSG_EXTERNAL_RESET " External Reset" - #define MSG_BROWNOUT_RESET " Brown out Reset" - #define MSG_WATCHDOG_RESET " Watchdog Reset" - #define MSG_SOFTWARE_RESET " Software Reset" - #define MSG_MARLIN "Marlin " - #define MSG_AUTHOR " | Author: " - #define MSG_CONFIGURATION_VER " Last Updated: " - #define MSG_FREE_MEMORY " Free Memory: " - #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " - #define MSG_OK "ok" - #define MSG_FILE_SAVED "Done saving file." - #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: " - #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: " - #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: " - #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: " - #define MSG_FILE_PRINTED "Done printing file" - #define MSG_BEGIN_FILE_LIST "Begin file list" - #define MSG_END_FILE_LIST "End file list" - #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " - #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " - #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " - #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature" - #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " - #define MSG_HEATING "Heating..." - #define MSG_HEATING_COMPLETE "Heating done." - #define MSG_BED_HEATING "Bed Heating." - #define MSG_BED_DONE "Bed done." - #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" - #define MSG_COUNT_X " Count X: " - #define MSG_ERR_KILLED "Printer halted. kill() called!" - #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" - #define MSG_RESEND "Resend: " - #define MSG_UNKNOWN_COMMAND "Unknown command: \"" - #define MSG_ACTIVE_EXTRUDER "Active Extruder: " - #define MSG_INVALID_EXTRUDER "Invalid extruder" - #define MSG_X_MIN "x_min: " - #define MSG_X_MAX "x_max: " - #define MSG_Y_MIN "y_min: " - #define MSG_Y_MAX "y_max: " - #define MSG_Z_MIN "z_min: " - #define MSG_Z_MAX "z_max: " - #define MSG_M119_REPORT "Reporting endstop status" - #define MSG_ENDSTOP_HIT "TRIGGERED" - #define MSG_ENDSTOP_OPEN "open" - #define MSG_HOTEND_OFFSET "Hotend offsets:" - - #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" - #define MSG_SD_INIT_FAIL "SD init fail" - #define MSG_SD_VOL_INIT_FAIL "volume.init failed" - #define MSG_SD_OPENROOT_FAIL "openRoot failed" - #define MSG_SD_CARD_OK "SD card ok" - #define MSG_SD_WORKDIR_FAIL "workDir open failed" - #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " - #define MSG_SD_FILE_OPENED "File opened: " - #define MSG_SD_SIZE " Size: " - #define MSG_SD_FILE_SELECTED "File selected" - #define MSG_SD_WRITE_TO_FILE "Writing to file: " - #define MSG_SD_PRINTING_BYTE "SD printing byte " - #define MSG_SD_NOT_PRINTING "Not SD printing" - #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" - #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: " - - #define MSG_STEPPER_TO_HIGH "Steprate to high: " - #define MSG_ENDSTOPS_HIT "endstops hit: " - #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" - #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" - -#endif - - -#if LANGUAGE_CHOICE == 2 - -// LCD Menu Messages - #define WELCOME_MSG MACHINE_NAME " Gotowe." - #define MSG_SD_INSERTED "Karta wlozona" - #define MSG_SD_REMOVED "Karta usunieta" - #define MSG_MAIN "Main" - #define MSG_AUTOSTART "Autostart" - #define MSG_DISABLE_STEPPERS "Wylacz silniki" - #define MSG_AUTO_HOME "Auto. poz. zerowa" - #define MSG_SET_ORIGIN "Ustaw punkt zerowy" - #define MSG_PREHEAT_PLA "Rozgrzej PLA" - #define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA" - #define MSG_PREHEAT_ABS "Rozgrzej ABS" - #define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS" - #define MSG_COOLDOWN "Chlodzenie" - #define MSG_EXTRUDE "Ekstruzja" - #define MSG_RETRACT "Cofanie" - #define MSG_MOVE_AXIS "Ruch osi" - #define MSG_SPEED "Predkosc" - #define MSG_NOZZLE "Dysza" - #define MSG_NOZZLE1 "Dysza2" - #define MSG_NOZZLE2 "Dysza3" - #define MSG_BED "Loze" - #define MSG_FAN_SPEED "Obroty wiatraka" - #define MSG_FLOW "Przeplyw" - #define MSG_CONTROL "Kontrola" - #define MSG_MIN " \002 Min" - #define MSG_MAX " \002 Max" - #define MSG_FACTOR " \002 Mnoznik" - #define MSG_AUTOTEMP "Auto. temp." - #define MSG_ON "Wl. " - #define MSG_OFF "Wyl." - #define MSG_PID_P "PID-P" - #define MSG_PID_I "PID-I" - #define MSG_PID_D "PID-D" - #define MSG_PID_C "PID-C" - #define MSG_ACC "Acc" - #define MSG_VXY_JERK "Zryw Vxy" + #define MSG_VMAX "Vmax " + #define MSG_X "x" + #define MSG_Y "y" + #define MSG_Z "z" + #define MSG_E "e" + #define MSG_VMIN "Vmin" + #define MSG_VTRAV_MIN "VTrav min" + #define MSG_AMAX "Amax " + #define MSG_A_RETRACT "A-retract" + #define MSG_XSTEPS "Xsteps/mm" + #define MSG_YSTEPS "Ysteps/mm" + #define MSG_ZSTEPS "Zsteps/mm" + #define MSG_ESTEPS "Esteps/mm" + #define MSG_RECTRACT "Rectract" + #define MSG_TEMPERATURE "Temperature" + #define MSG_MOTION "Motion" + #define MSG_STORE_EPROM "Store memory" + #define MSG_LOAD_EPROM "Load memory" + #define MSG_RESTORE_FAILSAFE "Restore Failsafe" + #define MSG_REFRESH "Refresh" + #define MSG_WATCH "Info screen" + #define MSG_PREPARE "Prepare" + #define MSG_TUNE "Tune" + #define MSG_PAUSE_PRINT "Pause Print" + #define MSG_RESUME_PRINT "Resume Print" + #define MSG_STOP_PRINT "Stop Print" + #define MSG_CARD_MENU "Print from SD" + #define MSG_NO_CARD "No Card" + #define MSG_DWELL "Sleep..." + #define MSG_USERWAIT "Wait for user..." + #define MSG_RESUMING "Resuming print" + #define MSG_NO_MOVE "No move." + #define MSG_KILLED "KILLED. " + #define MSG_STOPPED "STOPPED. " + #define MSG_CONTROL_RETRACT "Retract mm" + #define MSG_CONTROL_RETRACTF "Retract F" + #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" + #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" + #define MSG_AUTORETRACT "AutoRetr." + #define MSG_FILAMENTCHANGE "Change filament" + #define MSG_INIT_SDCARD "Init. SD-Card" + #define MSG_CNG_SDCARD "Change SD-Card" + +// Serial Console Messages + + #define MSG_Enqueing "enqueing \"" + #define MSG_POWERUP "PowerUp" + #define MSG_EXTERNAL_RESET " External Reset" + #define MSG_BROWNOUT_RESET " Brown out Reset" + #define MSG_WATCHDOG_RESET " Watchdog Reset" + #define MSG_SOFTWARE_RESET " Software Reset" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Author: " + #define MSG_CONFIGURATION_VER " Last Updated: " + #define MSG_FREE_MEMORY " Free Memory: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Done saving file." + #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: " + #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: " + #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: " + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: " + #define MSG_FILE_PRINTED "Done printing file" + #define MSG_BEGIN_FILE_LIST "Begin file list" + #define MSG_END_FILE_LIST "End file list" + #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " + #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " + #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " + #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature" + #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " + #define MSG_HEATING "Heating..." + #define MSG_HEATING_COMPLETE "Heating done." + #define MSG_BED_HEATING "Bed Heating." + #define MSG_BED_DONE "Bed done." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Count X: " + #define MSG_ERR_KILLED "Printer halted. kill() called!" + #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" + #define MSG_RESEND "Resend: " + #define MSG_UNKNOWN_COMMAND "Unknown command: \"" + #define MSG_ACTIVE_EXTRUDER "Active Extruder: " + #define MSG_INVALID_EXTRUDER "Invalid extruder" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Reporting endstop status" + #define MSG_ENDSTOP_HIT "TRIGGERED" + #define MSG_ENDSTOP_OPEN "open" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" + #define MSG_SD_INIT_FAIL "SD init fail" + #define MSG_SD_VOL_INIT_FAIL "volume.init failed" + #define MSG_SD_OPENROOT_FAIL "openRoot failed" + #define MSG_SD_CARD_OK "SD card ok" + #define MSG_SD_WORKDIR_FAIL "workDir open failed" + #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " + #define MSG_SD_FILE_OPENED "File opened: " + #define MSG_SD_SIZE " Size: " + #define MSG_SD_FILE_SELECTED "File selected" + #define MSG_SD_WRITE_TO_FILE "Writing to file: " + #define MSG_SD_PRINTING_BYTE "SD printing byte " + #define MSG_SD_NOT_PRINTING "Not SD printing" + #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" + #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: " + + #define MSG_STEPPER_TO_HIGH "Steprate to high: " + #define MSG_ENDSTOPS_HIT "endstops hit: " + #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" + #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" + +#endif + + +#if LANGUAGE_CHOICE == 2 + +// LCD Menu Messages + #define WELCOME_MSG MACHINE_NAME " Gotowe." + #define MSG_SD_INSERTED "Karta wlozona" + #define MSG_SD_REMOVED "Karta usunieta" + #define MSG_MAIN "Main" + #define MSG_AUTOSTART "Autostart" + #define MSG_DISABLE_STEPPERS "Wylacz silniki" + #define MSG_AUTO_HOME "Auto. poz. zerowa" + #define MSG_SET_ORIGIN "Ustaw punkt zerowy" + #define MSG_PREHEAT_PLA "Rozgrzej PLA" + #define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA" + #define MSG_PREHEAT_ABS "Rozgrzej ABS" + #define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS" + #define MSG_COOLDOWN "Chlodzenie" + #define MSG_EXTRUDE "Ekstruzja" + #define MSG_RETRACT "Cofanie" + #define MSG_MOVE_AXIS "Ruch osi" + #define MSG_SPEED "Predkosc" + #define MSG_NOZZLE "Dysza" + #define MSG_NOZZLE1 "Dysza2" + #define MSG_NOZZLE2 "Dysza3" + #define MSG_BED "Loze" + #define MSG_FAN_SPEED "Obroty wiatraka" + #define MSG_FLOW "Przeplyw" + #define MSG_CONTROL "Kontrola" + #define MSG_MIN " \002 Min" + #define MSG_MAX " \002 Max" + #define MSG_FACTOR " \002 Mnoznik" + #define MSG_AUTOTEMP "Auto. temp." + #define MSG_ON "Wl. " + #define MSG_OFF "Wyl." + #define MSG_PID_P "PID-P" + #define MSG_PID_I "PID-I" + #define MSG_PID_D "PID-D" + #define MSG_PID_C "PID-C" + #define MSG_ACC "Acc" + #define MSG_VXY_JERK "Zryw Vxy" #define MSG_VZ_JERK "Zryw Vz" #define MSG_VE_JERK "Zryw Ve" - #define MSG_VMAX "Vmax" - #define MSG_X "x" - #define MSG_Y "y" - #define MSG_Z "z" - #define MSG_E "e" - #define MSG_VMIN "Vmin" - #define MSG_VTRAV_MIN "Vskok min" - #define MSG_AMAX "Amax" - #define MSG_A_RETRACT "A-wycofanie" - #define MSG_XSTEPS "krokiX/mm" - #define MSG_YSTEPS "krokiY/mm" - #define MSG_ZSTEPS "krokiZ/mm" - #define MSG_ESTEPS "krokiE/mm" - #define MSG_RECTRACT "Wycofanie" - #define MSG_TEMPERATURE "Temperatura" - #define MSG_MOTION "Ruch" - #define MSG_STORE_EPROM "Zapisz w pamieci" - #define MSG_LOAD_EPROM "Wczytaj z pamieci" - #define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne" - #define MSG_REFRESH "\004Odswiez" - #define MSG_WATCH "Obserwuj" - #define MSG_PREPARE "Przygotuj" - #define MSG_CONTROL "Kontroluj" - #define MSG_TUNE "Strojenie" - #define MSG_PAUSE_PRINT "Pauza" - #define MSG_RESUME_PRINT "Wznowienie" - #define MSG_STOP_PRINT "Stop" - #define MSG_CARD_MENU "Menu SDCard" - #define MSG_NO_CARD "Brak karty" - #define MSG_DWELL "Uspij..." - #define MSG_USERWAIT "Czekaj na uzytkownika..." - #define MSG_RESUMING "Wznawiam drukowanie" - #define MSG_NO_MOVE "Brak ruchu." - #define MSG_PART_RELEASE "Czesciowe zwolnienie" - #define MSG_KILLED "Ubity. " - #define MSG_STOPPED "Zatrzymany. " - #define MSG_STEPPER_RELEASED "Zwolniony." - #define MSG_CONTROL_RETRACT "Wycofaj mm" - #define MSG_CONTROL_RETRACTF "Wycofaj F" - #define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:" - #define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm" - #define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F" - #define MSG_AUTORETRACT "Auto. wycofanie" - #define MSG_FILAMENTCHANGE "Change filament" - -// Serial Console Messages - - #define MSG_Enqueing "Kolejkowanie \"" - #define MSG_POWERUP "Zasilanie wlaczone" - #define MSG_EXTERNAL_RESET " Reset (zewnetrzny)" - #define MSG_BROWNOUT_RESET " Reset (spadek napiecia)" - #define MSG_WATCHDOG_RESET " Reset (watchdog)" - #define MSG_SOFTWARE_RESET " Reset (programowy)" - #define MSG_MARLIN "Marlin " - #define MSG_AUTHOR " | Autor: " - #define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: " - #define MSG_FREE_MEMORY " Wolna pamiec: " - #define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): " - #define MSG_OK "ok" - #define MSG_FILE_SAVED "Plik zapisany." - #define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:" - #define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: " - #define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:" - #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:" - #define MSG_FILE_PRINTED "Ukonczono wydruk z pliku" - #define MSG_BEGIN_FILE_LIST "Start listy plikow" - #define MSG_END_FILE_LIST "Koniec listy plikow" - #define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder " - #define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder " - #define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder " - #define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :(" - #define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder " - #define MSG_HEATING "Nagrzewanie ekstrudera..." - #define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone." - #define MSG_BED_HEATING "Nagrzewanie loza..." - #define MSG_BED_DONE "Nagrzewanie loza zakonczone." - #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" - #define MSG_COUNT_X " Liczenie X: " - #define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()" - #define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)" - #define MSG_RESEND "Wyslij ponownie: " - #define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \"" - #define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: " - #define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder" - #define MSG_X_MIN "x_min: " - #define MSG_X_MAX "x_max: " - #define MSG_Y_MIN "y_min: " - #define MSG_Y_MAX "y_max: " - #define MSG_Z_MIN "z_min: " - #define MSG_Z_MAX "z_max: " - #define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych" - #define MSG_ENDSTOP_HIT "WYZWOLONY" - #define MSG_ENDSTOP_OPEN "otwarty" - #define MSG_HOTEND_OFFSET "Hotend offsets:" - - #define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu" - #define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD" - #define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu" - #define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego" - #define MSG_SD_CARD_OK "Karta SD zainicjalizowana" - #define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego" - #define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: " - #define MSG_SD_FILE_OPENED "Otwarto plik:" - #define MSG_SD_SIZE " Rozmiar:" - #define MSG_SD_FILE_SELECTED "Wybrano plik" - #define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: " - #define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt " - #define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD" - #define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku" - #define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: " - - #define MSG_STEPPER_TO_HIGH "Za duza czestotliwosc krokow: " - #define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: " - #define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje" - #define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje" - -#endif - - -#if LANGUAGE_CHOICE == 3 - -#define WELCOME_MSG MACHINE_NAME " Pret." -#define MSG_SD_INSERTED "Carte inseree" -#define MSG_SD_REMOVED "Carte retiree" -#define MSG_MAIN " Principal \003" -#define MSG_AUTOSTART " Demarrage auto." -#define MSG_DISABLE_STEPPERS " Desactiver moteurs" -#define MSG_AUTO_HOME " Home auto." -#define MSG_SET_ORIGIN " Regler origine" -#define MSG_PREHEAT_PLA " Prechauffage PLA" -#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA" -#define MSG_PREHEAT_ABS " Prechauffage ABS" -#define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS" -#define MSG_COOLDOWN " Refroidissement" -#define MSG_EXTRUDE " Extrusion" -#define MSG_RETRACT " Retractation" -#define MSG_PREHEAT_PLA " Prechauffage PLA" -#define MSG_PREHEAT_ABS " Prechauffage ABS" -#define MSG_MOVE_AXIS " Deplacer axe \x7E" -#define MSG_SPEED " Vitesse:" -#define MSG_NOZZLE " \002Buse:" -#define MSG_NOZZLE1 " \002Buse2:" -#define MSG_NOZZLE2 " \002Buse3:" -#define MSG_BED " \002Lit:" -#define MSG_FAN_SPEED " Vitesse ventilateur:" -#define MSG_FLOW " Flux:" -#define MSG_CONTROL " Controle \003" -#define MSG_MIN " \002 Min:" -#define MSG_MAX " \002 Max:" -#define MSG_FACTOR " \002 Facteur:" -#define MSG_AUTOTEMP " Temp. Auto.:" -#define MSG_ON "Marche " -#define MSG_OFF "Arret" -#define MSG_PID_P " PID-P: " -#define MSG_PID_I " PID-I: " -#define MSG_PID_D " PID-D: " -#define MSG_PID_C " PID-C: " -#define MSG_ACC " Acc:" -#define MSG_VXY_JERK "Vxy-jerk" + #define MSG_VMAX "Vmax" + #define MSG_X "x" + #define MSG_Y "y" + #define MSG_Z "z" + #define MSG_E "e" + #define MSG_VMIN "Vmin" + #define MSG_VTRAV_MIN "Vskok min" + #define MSG_AMAX "Amax" + #define MSG_A_RETRACT "A-wycofanie" + #define MSG_XSTEPS "krokiX/mm" + #define MSG_YSTEPS "krokiY/mm" + #define MSG_ZSTEPS "krokiZ/mm" + #define MSG_ESTEPS "krokiE/mm" + #define MSG_RECTRACT "Wycofanie" + #define MSG_TEMPERATURE "Temperatura" + #define MSG_MOTION "Ruch" + #define MSG_STORE_EPROM "Zapisz w pamieci" + #define MSG_LOAD_EPROM "Wczytaj z pamieci" + #define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne" + #define MSG_REFRESH "\004Odswiez" + #define MSG_WATCH "Obserwuj" + #define MSG_PREPARE "Przygotuj" + #define MSG_CONTROL "Kontroluj" + #define MSG_TUNE "Strojenie" + #define MSG_PAUSE_PRINT "Pauza" + #define MSG_RESUME_PRINT "Wznowienie" + #define MSG_STOP_PRINT "Stop" + #define MSG_CARD_MENU "Menu SDCard" + #define MSG_NO_CARD "Brak karty" + #define MSG_DWELL "Uspij..." + #define MSG_USERWAIT "Czekaj na uzytkownika..." + #define MSG_RESUMING "Wznawiam drukowanie" + #define MSG_NO_MOVE "Brak ruchu." + #define MSG_PART_RELEASE "Czesciowe zwolnienie" + #define MSG_KILLED "Ubity. " + #define MSG_STOPPED "Zatrzymany. " + #define MSG_STEPPER_RELEASED "Zwolniony." + #define MSG_CONTROL_RETRACT "Wycofaj mm" + #define MSG_CONTROL_RETRACTF "Wycofaj F" + #define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:" + #define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F" + #define MSG_AUTORETRACT "Auto. wycofanie" + #define MSG_FILAMENTCHANGE "Change filament" + +// Serial Console Messages + + #define MSG_Enqueing "Kolejkowanie \"" + #define MSG_POWERUP "Zasilanie wlaczone" + #define MSG_EXTERNAL_RESET " Reset (zewnetrzny)" + #define MSG_BROWNOUT_RESET " Reset (spadek napiecia)" + #define MSG_WATCHDOG_RESET " Reset (watchdog)" + #define MSG_SOFTWARE_RESET " Reset (programowy)" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Autor: " + #define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: " + #define MSG_FREE_MEMORY " Wolna pamiec: " + #define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Plik zapisany." + #define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:" + #define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: " + #define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:" + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:" + #define MSG_FILE_PRINTED "Ukonczono wydruk z pliku" + #define MSG_BEGIN_FILE_LIST "Start listy plikow" + #define MSG_END_FILE_LIST "Koniec listy plikow" + #define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder " + #define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder " + #define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder " + #define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :(" + #define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder " + #define MSG_HEATING "Nagrzewanie ekstrudera..." + #define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone." + #define MSG_BED_HEATING "Nagrzewanie loza..." + #define MSG_BED_DONE "Nagrzewanie loza zakonczone." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Liczenie X: " + #define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()" + #define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)" + #define MSG_RESEND "Wyslij ponownie: " + #define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \"" + #define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: " + #define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych" + #define MSG_ENDSTOP_HIT "WYZWOLONY" + #define MSG_ENDSTOP_OPEN "otwarty" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu" + #define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD" + #define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu" + #define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego" + #define MSG_SD_CARD_OK "Karta SD zainicjalizowana" + #define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego" + #define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: " + #define MSG_SD_FILE_OPENED "Otwarto plik:" + #define MSG_SD_SIZE " Rozmiar:" + #define MSG_SD_FILE_SELECTED "Wybrano plik" + #define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: " + #define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt " + #define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD" + #define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku" + #define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: " + + #define MSG_STEPPER_TO_HIGH "Za duza czestotliwosc krokow: " + #define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: " + #define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje" + #define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje" + +#endif + + +#if LANGUAGE_CHOICE == 3 + +#define WELCOME_MSG MACHINE_NAME " Pret." +#define MSG_SD_INSERTED "Carte inseree" +#define MSG_SD_REMOVED "Carte retiree" +#define MSG_MAIN " Principal \003" +#define MSG_AUTOSTART " Demarrage auto." +#define MSG_DISABLE_STEPPERS " Desactiver moteurs" +#define MSG_AUTO_HOME " Home auto." +#define MSG_SET_ORIGIN " Regler origine" +#define MSG_PREHEAT_PLA " Prechauffage PLA" +#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA" +#define MSG_PREHEAT_ABS " Prechauffage ABS" +#define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS" +#define MSG_COOLDOWN " Refroidissement" +#define MSG_EXTRUDE " Extrusion" +#define MSG_RETRACT " Retractation" +#define MSG_PREHEAT_PLA " Prechauffage PLA" +#define MSG_PREHEAT_ABS " Prechauffage ABS" +#define MSG_MOVE_AXIS " Deplacer axe \x7E" +#define MSG_SPEED " Vitesse:" +#define MSG_NOZZLE " \002Buse:" +#define MSG_NOZZLE1 " \002Buse2:" +#define MSG_NOZZLE2 " \002Buse3:" +#define MSG_BED " \002Lit:" +#define MSG_FAN_SPEED " Vitesse ventilateur:" +#define MSG_FLOW " Flux:" +#define MSG_CONTROL " Controle \003" +#define MSG_MIN " \002 Min:" +#define MSG_MAX " \002 Max:" +#define MSG_FACTOR " \002 Facteur:" +#define MSG_AUTOTEMP " Temp. Auto.:" +#define MSG_ON "Marche " +#define MSG_OFF "Arret" +#define MSG_PID_P " PID-P: " +#define MSG_PID_I " PID-I: " +#define MSG_PID_D " PID-D: " +#define MSG_PID_C " PID-C: " +#define MSG_ACC " Acc:" +#define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" -#define MSG_VMAX " Vmax " -#define MSG_X "x:" -#define MSG_Y "y:" -#define MSG_Z "z:" -#define MSG_E "e:" -#define MSG_VMIN " Vmin:" -#define MSG_VTRAV_MIN " Vdepl min:" -#define MSG_AMAX " Amax " -#define MSG_A_RETRACT " A-retract:" -#define MSG_XSTEPS " Xpas/mm:" -#define MSG_YSTEPS " Ypas/mm:" -#define MSG_ZSTEPS " Zpas/mm:" -#define MSG_ESTEPS " Epas/mm:" -#define MSG_MAIN_WIDE " Principal \003" -#define MSG_RECTRACT_WIDE " Rectractater \x7E" -#define MSG_TEMPERATURE_WIDE " Temperature \x7E" -#define MSG_TEMPERATURE_RTN " Temperature \003" -#define MSG_MOTION_WIDE " Mouvement \x7E" -#define MSG_STORE_EPROM " Sauvegarder memoire" -#define MSG_LOAD_EPROM " Lire memoire" -#define MSG_RESTORE_FAILSAFE " Restaurer memoire" -#define MSG_REFRESH "\004Actualiser" -#define MSG_WATCH " Surveiller \003" -#define MSG_PREPARE " Preparer \x7E" -#define MSG_PREPARE_ALT " Prepare \003" -#define MSG_CONTROL_ARROW " Controle \x7E" -#define MSG_RETRACT_ARROW " Retracter \x7E" -#define MSG_TUNE " Regler \x7E" -#define MSG_PAUSE_PRINT " Pause impression \x7E" -#define MSG_RESUME_PRINT " Reprendre impression \x7E" -#define MSG_STOP_PRINT " Arreter impression \x7E" -#define MSG_CARD_MENU " Menu carte \x7E" -#define MSG_NO_CARD " Pas de carte" -#define MSG_DWELL "Repos..." -#define MSG_USERWAIT "Attente de l'utilisateur..." -#define MSG_NO_MOVE "Aucun mouvement." -#define MSG_PART_RELEASE "Relache partielle" -#define MSG_KILLED "TUE." -#define MSG_STOPPED "STOPPE." -#define MSG_STEPPER_RELEASED "RELACHE." -#define MSG_CONTROL_RETRACT " Retractation mm:" -#define MSG_CONTROL_RETRACTF " Retractation F:" -#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" -#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" -#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" -#define MSG_AUTORETRACT " Retract. Auto.:" -#define MSG_FILAMENTCHANGE "Change filament" - -// Serial Console Messages - -#define MSG_Enqueing "Mise en tampon \"" -#define MSG_POWERUP "Allumage" -#define MSG_EXTERNAL_RESET " RAZ Externe" -#define MSG_BROWNOUT_RESET " RAZ defaut alim." -#define MSG_WATCHDOG_RESET " RAZ Watchdog" -#define MSG_SOFTWARE_RESET " RAZ logicielle" -#define MSG_MARLIN "Marlin " -#define MSG_AUTHOR " | Auteur: " -#define MSG_CONFIGURATION_VER " Derniere MaJ: " -#define MSG_FREE_MEMORY " Memoire libre: " -#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " -#define MSG_OK "ok" -#define MSG_FILE_SAVED "Fichier enregistre." -#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: " -#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: " -#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: " -#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: " -#define MSG_FILE_PRINTED "Impression terminee" -#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers" -#define MSG_END_FILE_LIST "Fin de la liste de fichiers" -#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide" -#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide" -#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide" -#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature" -#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide " -#define MSG_HEATING "En chauffe..." -#define MSG_HEATING_COMPLETE "Chauffe terminee." -#define MSG_BED_HEATING "Chauffe du lit." -#define MSG_BED_DONE "Chauffe du lit terminee." -#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" -#define MSG_COUNT_X " Compteur X: " -#define MSG_ERR_KILLED "Impression arretee. kill() appelee!" -#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)" -#define MSG_RESEND "Renvoie: " -#define MSG_UNKNOWN_COMMAND "Commande inconnue: \"" -#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: " -#define MSG_INVALID_EXTRUDER "Extrudeur invalide" -#define MSG_X_MIN "x_min: " -#define MSG_X_MAX "x_max: " -#define MSG_Y_MIN "y_min: " -#define MSG_Y_MAX "y_max: " -#define MSG_Z_MIN "z_min: " -#define MSG_Z_MAX "z_max: " -#define MSG_M119_REPORT "Affichage du status des fin de course" -#define MSG_ENDSTOP_HIT "DECLENCHE" -#define MSG_ENDSTOP_OPEN "OUVERT" -#define MSG_HOTEND_OFFSET "Hotend offsets:" - -#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire" -#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD" -#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init" -#define MSG_SD_OPENROOT_FAIL "Echec openRoot" -#define MSG_SD_CARD_OK "Carte SD Ok" -#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir" -#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: " -#define MSG_SD_FILE_OPENED "Fichier ouvert: " -#define MSG_SD_SIZE " Taille: " -#define MSG_SD_FILE_SELECTED "Fichier selectionne" -#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: " -#define MSG_SD_PRINTING_BYTE "Octet impression SD " -#define MSG_SD_NOT_PRINTING "Pas d'impression SD" -#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier" -#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: " - -#define MSG_STEPPER_TO_HIGH "Steprate trop eleve: " -#define MSG_ENDSTOPS_HIT "Fin de course atteint: " -#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee" -#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee" - -#endif - - -#if LANGUAGE_CHOICE == 4 - -// LCD Menu Messages - - #define WELCOME_MSG MACHINE_NAME " Bereit." - - #define MSG_SD_INSERTED "SDKarte erkannt" - #define MSG_SD_REMOVED "SDKarte entfernt" - #define MSG_MAIN "Hauptmneü" - #define MSG_AUTOSTART "Autostart" - #define MSG_DISABLE_STEPPERS "Stepper abschalten" - #define MSG_AUTO_HOME "Auto Nullpunkt" - #define MSG_SET_ORIGIN "Setze Nullpunkt" - #define MSG_PREHEAT_PLA "Vorwärmen PLA" - #define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen" - #define MSG_PREHEAT_ABS "Vorwärmen ABS" - #define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen" - #define MSG_COOLDOWN "Abkühlen" - #define MSG_EXTRUDE "Extrude" - #define MSG_RETRACT "Retract" - #define MSG_MOVE_AXIS "Achsen bewegen" - #define MSG_SPEED "Geschw" - #define MSG_NOZZLE "Düse" - #define MSG_NOZZLE1 "Düse2" - #define MSG_NOZZLE2 "Düse3" - #define MSG_BED "Bett" - #define MSG_FAN_SPEED "Lüftergeschw." - #define MSG_FLOW "Fluß" - #define MSG_CONTROL "Einstellungen" - #define MSG_MIN "\002 Min" - #define MSG_MAX "\002 Max" - #define MSG_FACTOR "\002 Faktor" - #define MSG_AUTOTEMP "AutoTemp" - #define MSG_ON "Ein" - #define MSG_OFF "Aus" - #define MSG_PID_P "PID-P" - #define MSG_PID_I "PID-I" - #define MSG_PID_D "PID-D" - #define MSG_PID_C "PID-C" - #define MSG_ACC "Acc" - #define MSG_VXY_JERK "Vxy-jerk" +#define MSG_VMAX " Vmax " +#define MSG_X "x:" +#define MSG_Y "y:" +#define MSG_Z "z:" +#define MSG_E "e:" +#define MSG_VMIN " Vmin:" +#define MSG_VTRAV_MIN " Vdepl min:" +#define MSG_AMAX " Amax " +#define MSG_A_RETRACT " A-retract:" +#define MSG_XSTEPS " Xpas/mm:" +#define MSG_YSTEPS " Ypas/mm:" +#define MSG_ZSTEPS " Zpas/mm:" +#define MSG_ESTEPS " Epas/mm:" +#define MSG_MAIN_WIDE " Principal \003" +#define MSG_RECTRACT_WIDE " Rectractater \x7E" +#define MSG_TEMPERATURE_WIDE " Temperature \x7E" +#define MSG_TEMPERATURE_RTN " Temperature \003" +#define MSG_MOTION_WIDE " Mouvement \x7E" +#define MSG_STORE_EPROM " Sauvegarder memoire" +#define MSG_LOAD_EPROM " Lire memoire" +#define MSG_RESTORE_FAILSAFE " Restaurer memoire" +#define MSG_REFRESH "\004Actualiser" +#define MSG_WATCH " Surveiller \003" +#define MSG_PREPARE " Preparer \x7E" +#define MSG_PREPARE_ALT " Prepare \003" +#define MSG_CONTROL_ARROW " Controle \x7E" +#define MSG_RETRACT_ARROW " Retracter \x7E" +#define MSG_TUNE " Regler \x7E" +#define MSG_PAUSE_PRINT " Pause impression \x7E" +#define MSG_RESUME_PRINT " Reprendre impression \x7E" +#define MSG_STOP_PRINT " Arreter impression \x7E" +#define MSG_CARD_MENU " Menu carte \x7E" +#define MSG_NO_CARD " Pas de carte" +#define MSG_DWELL "Repos..." +#define MSG_USERWAIT "Attente de l'utilisateur..." +#define MSG_NO_MOVE "Aucun mouvement." +#define MSG_PART_RELEASE "Relache partielle" +#define MSG_KILLED "TUE." +#define MSG_STOPPED "STOPPE." +#define MSG_STEPPER_RELEASED "RELACHE." +#define MSG_CONTROL_RETRACT " Retractation mm:" +#define MSG_CONTROL_RETRACTF " Retractation F:" +#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" +#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" +#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" +#define MSG_AUTORETRACT " Retract. Auto.:" +#define MSG_FILAMENTCHANGE "Change filament" + +// Serial Console Messages + +#define MSG_Enqueing "Mise en tampon \"" +#define MSG_POWERUP "Allumage" +#define MSG_EXTERNAL_RESET " RAZ Externe" +#define MSG_BROWNOUT_RESET " RAZ defaut alim." +#define MSG_WATCHDOG_RESET " RAZ Watchdog" +#define MSG_SOFTWARE_RESET " RAZ logicielle" +#define MSG_MARLIN "Marlin " +#define MSG_AUTHOR " | Auteur: " +#define MSG_CONFIGURATION_VER " Derniere MaJ: " +#define MSG_FREE_MEMORY " Memoire libre: " +#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " +#define MSG_OK "ok" +#define MSG_FILE_SAVED "Fichier enregistre." +#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: " +#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: " +#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: " +#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: " +#define MSG_FILE_PRINTED "Impression terminee" +#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers" +#define MSG_END_FILE_LIST "Fin de la liste de fichiers" +#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide" +#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide" +#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide" +#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature" +#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide " +#define MSG_HEATING "En chauffe..." +#define MSG_HEATING_COMPLETE "Chauffe terminee." +#define MSG_BED_HEATING "Chauffe du lit." +#define MSG_BED_DONE "Chauffe du lit terminee." +#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" +#define MSG_COUNT_X " Compteur X: " +#define MSG_ERR_KILLED "Impression arretee. kill() appelee!" +#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)" +#define MSG_RESEND "Renvoie: " +#define MSG_UNKNOWN_COMMAND "Commande inconnue: \"" +#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: " +#define MSG_INVALID_EXTRUDER "Extrudeur invalide" +#define MSG_X_MIN "x_min: " +#define MSG_X_MAX "x_max: " +#define MSG_Y_MIN "y_min: " +#define MSG_Y_MAX "y_max: " +#define MSG_Z_MIN "z_min: " +#define MSG_Z_MAX "z_max: " +#define MSG_M119_REPORT "Affichage du status des fin de course" +#define MSG_ENDSTOP_HIT "DECLENCHE" +#define MSG_ENDSTOP_OPEN "OUVERT" +#define MSG_HOTEND_OFFSET "Hotend offsets:" + +#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire" +#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD" +#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init" +#define MSG_SD_OPENROOT_FAIL "Echec openRoot" +#define MSG_SD_CARD_OK "Carte SD Ok" +#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir" +#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: " +#define MSG_SD_FILE_OPENED "Fichier ouvert: " +#define MSG_SD_SIZE " Taille: " +#define MSG_SD_FILE_SELECTED "Fichier selectionne" +#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: " +#define MSG_SD_PRINTING_BYTE "Octet impression SD " +#define MSG_SD_NOT_PRINTING "Pas d'impression SD" +#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier" +#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: " + +#define MSG_STEPPER_TO_HIGH "Steprate trop eleve: " +#define MSG_ENDSTOPS_HIT "Fin de course atteint: " +#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee" +#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee" + +#endif + + +#if LANGUAGE_CHOICE == 4 + +// LCD Menu Messages + + #define WELCOME_MSG MACHINE_NAME " Bereit." + + #define MSG_SD_INSERTED "SDKarte erkannt" + #define MSG_SD_REMOVED "SDKarte entfernt" + #define MSG_MAIN "Hauptmneü" + #define MSG_AUTOSTART "Autostart" + #define MSG_DISABLE_STEPPERS "Stepper abschalten" + #define MSG_AUTO_HOME "Auto Nullpunkt" + #define MSG_SET_ORIGIN "Setze Nullpunkt" + #define MSG_PREHEAT_PLA "Vorwärmen PLA" + #define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen" + #define MSG_PREHEAT_ABS "Vorwärmen ABS" + #define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen" + #define MSG_COOLDOWN "Abkühlen" + #define MSG_EXTRUDE "Extrude" + #define MSG_RETRACT "Retract" + #define MSG_MOVE_AXIS "Achsen bewegen" + #define MSG_SPEED "Geschw" + #define MSG_NOZZLE "Düse" + #define MSG_NOZZLE1 "Düse2" + #define MSG_NOZZLE2 "Düse3" + #define MSG_BED "Bett" + #define MSG_FAN_SPEED "Lüftergeschw." + #define MSG_FLOW "Fluß" + #define MSG_CONTROL "Einstellungen" + #define MSG_MIN "\002 Min" + #define MSG_MAX "\002 Max" + #define MSG_FACTOR "\002 Faktor" + #define MSG_AUTOTEMP "AutoTemp" + #define MSG_ON "Ein" + #define MSG_OFF "Aus" + #define MSG_PID_P "PID-P" + #define MSG_PID_I "PID-I" + #define MSG_PID_D "PID-D" + #define MSG_PID_C "PID-C" + #define MSG_ACC "Acc" + #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" - #define MSG_VMAX "Vmax " - #define MSG_X "x" - #define MSG_Y "y" - #define MSG_Z "z" - #define MSG_E "e" - #define MSG_VMIN "Vmin" - #define MSG_VTRAV_MIN "VTrav min" - #define MSG_AMAX "Amax " - #define MSG_A_RETRACT "A-Retract" - #define MSG_XSTEPS "Xsteps/mm" - #define MSG_YSTEPS "Ysteps/mm" - #define MSG_ZSTEPS "Zsteps/mm" - #define MSG_ESTEPS "Esteps/mm" - #define MSG_RECTRACT_WIDE "Rectract" - #define MSG_WATCH "Beobachten" - #define MSG_TEMPERATURE "Temperatur" - #define MSG_MOTION "Bewegung" - #define MSG_STORE_EPROM "EPROM speichern" - #define MSG_LOAD_EPROM "EPROM laden" - #define MSG_RESTORE_FAILSAFE "Standardkonfig." - #define MSG_REFRESH "Aktualisieren" - #define MSG_PREPARE "Vorbereitung" - #define MSG_CONTROL "Einstellungen" - #define MSG_TUNE "Justierung" - #define MSG_PAUSE_PRINT "Druck anhalten" - #define MSG_RESUME_PRINT "Druck fortsetz" - #define MSG_STOP_PRINT "Druck stoppen" - #define MSG_CARD_MENU "SDKarten Menü" - #define MSG_NO_CARD "Keine SDKarte" - #define MSG_DWELL "Warten..." - #define MSG_USERWAIT "Warte auf Nutzer..." - #define MSG_RESUMING "Druck fortsetzung" - #define MSG_NO_MOVE "Kein Zug." - #define MSG_PART_RELEASE "Stepper tlw frei" - #define MSG_KILLED "KILLED" - #define MSG_STOPPED "GESTOPPT" - #define MSG_STEPPER_RELEASED "Stepper frei" - #define MSG_CONTROL_RETRACT "Retract mm" - #define MSG_CONTROL_RETRACTF "Retract F" - #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" - #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" - #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" - #define MSG_AUTORETRACT "AutoRetr." - #define MSG_FILAMENTCHANGE "Filament wechseln" - -// Serial Console Messages - - #define MSG_Enqueing "enqueing \"" - #define MSG_POWERUP "PowerUp" - #define MSG_EXTERNAL_RESET " External Reset" - #define MSG_BROWNOUT_RESET " Brown out Reset" - #define MSG_WATCHDOG_RESET " Watchdog Reset" - #define MSG_SOFTWARE_RESET " Software Reset" - #define MSG_MARLIN "Marlin: " - #define MSG_AUTHOR " | Author: " - #define MSG_CONFIGURATION_VER " Last Updated: " - #define MSG_FREE_MEMORY " Free Memory: " - #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " - #define MSG_OK "ok" - #define MSG_FILE_SAVED "Done saving file." - #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:" - #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:" - #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:" - #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:" - #define MSG_FILE_PRINTED "Done printing file" - #define MSG_BEGIN_FILE_LIST "Begin file list" - #define MSG_END_FILE_LIST "End file list" - #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " - #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " - #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " - #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp" - #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " - #define MSG_HEATING "Heating..." - #define MSG_HEATING_COMPLETE "Heating done." - #define MSG_BED_HEATING "Bed Heating." - #define MSG_BED_DONE "Bed done." - #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" - #define MSG_COUNT_X " Count X:" - #define MSG_ERR_KILLED "Printer halted. kill() called !!" - #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!" - #define MSG_RESEND "Resend:" - #define MSG_UNKNOWN_COMMAND "Unknown command:\"" - #define MSG_ACTIVE_EXTRUDER "Active Extruder: " - #define MSG_INVALID_EXTRUDER "Invalid extruder" - #define MSG_X_MIN "x_min: " - #define MSG_X_MAX "x_max: " - #define MSG_Y_MIN "y_min: " - #define MSG_Y_MAX "y_max: " - #define MSG_Z_MIN "z_min: " - #define MSG_Z_MAX "z_max: " - #define MSG_M119_REPORT "Reporting endstop status" - #define MSG_ENDSTOP_HIT "TRIGGERED" - #define MSG_ENDSTOP_OPEN "open" - #define MSG_HOTEND_OFFSET "Hotend offsets:" - - #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" - #define MSG_SD_INIT_FAIL "SD init fail" - #define MSG_SD_VOL_INIT_FAIL "volume.init failed" - #define MSG_SD_OPENROOT_FAIL "openRoot failed" - #define MSG_SD_CARD_OK "SD card ok" - #define MSG_SD_WORKDIR_FAIL "workDir open failed" - #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " - #define MSG_SD_FILE_OPENED "File opened:" - #define MSG_SD_SIZE " Size:" - #define MSG_SD_FILE_SELECTED "File selected" - #define MSG_SD_WRITE_TO_FILE "Writing to file: " - #define MSG_SD_PRINTING_BYTE "SD printing byte " - #define MSG_SD_NOT_PRINTING "Not SD printing" - #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" - #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:" - - #define MSG_STEPPER_TO_HIGH "Steprate to high : " - #define MSG_ENDSTOPS_HIT "endstops hit: " - #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" - #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" - -#endif - - -#if LANGUAGE_CHOICE == 5 - -// LCD Menu Messages -#define WELCOME_MSG MACHINE_NAME " Lista." -#define MSG_SD_INSERTED "Tarjeta SD Colocada" -#define MSG_SD_REMOVED "Tarjeta SD Retirada" -#define MSG_MAIN " Menu Principal \003" -#define MSG_AUTOSTART " Autostart" -#define MSG_DISABLE_STEPPERS " Apagar Motores" -#define MSG_AUTO_HOME " Llevar Ejes al Cero" -#define MSG_SET_ORIGIN " Establecer Cero" -#define MSG_COOLDOWN " Enfriar" -#define MSG_EXTRUDE " Extruir" -#define MSG_RETRACT " Retraer" -#define MSG_PREHEAT_PLA " Precalentar PLA" -#define MSG_PREHEAT_PLA_SETTINGS " Ajustar temp. PLA" -#define MSG_PREHEAT_ABS " Precalentar ABS" -#define MSG_PREHEAT_ABS_SETTINGS " Ajustar temp. ABS" -#define MSG_MOVE_AXIS " Mover Ejes \x7E" -#define MSG_SPEED " Velocidad:" -#define MSG_NOZZLE " \002Nozzle:" -#define MSG_NOZZLE1 " \002Nozzle2:" -#define MSG_NOZZLE2 " \002Nozzle3:" -#define MSG_BED " \002Base:" -#define MSG_FAN_SPEED " Ventilador:" -#define MSG_FLOW " Flujo:" -#define MSG_CONTROL " Control \003" -#define MSG_MIN " \002 Min:" -#define MSG_MAX " \002 Max:" -#define MSG_FACTOR " \002 Fact:" -#define MSG_AUTOTEMP " Autotemp:" -#define MSG_ON "On " -#define MSG_OFF "Off" -#define MSG_PID_P " PID-P: " -#define MSG_PID_I " PID-I: " -#define MSG_PID_D " PID-D: " -#define MSG_PID_C " PID-C: " -#define MSG_ACC " Acc:" -#define MSG_VXY_JERK " Vxy-jerk: " + #define MSG_VMAX "Vmax " + #define MSG_X "x" + #define MSG_Y "y" + #define MSG_Z "z" + #define MSG_E "e" + #define MSG_VMIN "Vmin" + #define MSG_VTRAV_MIN "VTrav min" + #define MSG_AMAX "Amax " + #define MSG_A_RETRACT "A-Retract" + #define MSG_XSTEPS "Xsteps/mm" + #define MSG_YSTEPS "Ysteps/mm" + #define MSG_ZSTEPS "Zsteps/mm" + #define MSG_ESTEPS "Esteps/mm" + #define MSG_RECTRACT_WIDE "Rectract" + #define MSG_WATCH "Beobachten" + #define MSG_TEMPERATURE "Temperatur" + #define MSG_MOTION "Bewegung" + #define MSG_STORE_EPROM "EPROM speichern" + #define MSG_LOAD_EPROM "EPROM laden" + #define MSG_RESTORE_FAILSAFE "Standardkonfig." + #define MSG_REFRESH "Aktualisieren" + #define MSG_PREPARE "Vorbereitung" + #define MSG_CONTROL "Einstellungen" + #define MSG_TUNE "Justierung" + #define MSG_PAUSE_PRINT "Druck anhalten" + #define MSG_RESUME_PRINT "Druck fortsetz" + #define MSG_STOP_PRINT "Druck stoppen" + #define MSG_CARD_MENU "SDKarten Menü" + #define MSG_NO_CARD "Keine SDKarte" + #define MSG_DWELL "Warten..." + #define MSG_USERWAIT "Warte auf Nutzer..." + #define MSG_RESUMING "Druck fortsetzung" + #define MSG_NO_MOVE "Kein Zug." + #define MSG_PART_RELEASE "Stepper tlw frei" + #define MSG_KILLED "KILLED" + #define MSG_STOPPED "GESTOPPT" + #define MSG_STEPPER_RELEASED "Stepper frei" + #define MSG_CONTROL_RETRACT "Retract mm" + #define MSG_CONTROL_RETRACTF "Retract F" + #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" + #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" + #define MSG_AUTORETRACT "AutoRetr." + #define MSG_FILAMENTCHANGE "Filament wechseln" + +// Serial Console Messages + + #define MSG_Enqueing "enqueing \"" + #define MSG_POWERUP "PowerUp" + #define MSG_EXTERNAL_RESET " External Reset" + #define MSG_BROWNOUT_RESET " Brown out Reset" + #define MSG_WATCHDOG_RESET " Watchdog Reset" + #define MSG_SOFTWARE_RESET " Software Reset" + #define MSG_MARLIN "Marlin: " + #define MSG_AUTHOR " | Author: " + #define MSG_CONFIGURATION_VER " Last Updated: " + #define MSG_FREE_MEMORY " Free Memory: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Done saving file." + #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:" + #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:" + #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:" + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:" + #define MSG_FILE_PRINTED "Done printing file" + #define MSG_BEGIN_FILE_LIST "Begin file list" + #define MSG_END_FILE_LIST "End file list" + #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " + #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " + #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " + #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp" + #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " + #define MSG_HEATING "Heating..." + #define MSG_HEATING_COMPLETE "Heating done." + #define MSG_BED_HEATING "Bed Heating." + #define MSG_BED_DONE "Bed done." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Count X:" + #define MSG_ERR_KILLED "Printer halted. kill() called !!" + #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!" + #define MSG_RESEND "Resend:" + #define MSG_UNKNOWN_COMMAND "Unknown command:\"" + #define MSG_ACTIVE_EXTRUDER "Active Extruder: " + #define MSG_INVALID_EXTRUDER "Invalid extruder" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Reporting endstop status" + #define MSG_ENDSTOP_HIT "TRIGGERED" + #define MSG_ENDSTOP_OPEN "open" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" + #define MSG_SD_INIT_FAIL "SD init fail" + #define MSG_SD_VOL_INIT_FAIL "volume.init failed" + #define MSG_SD_OPENROOT_FAIL "openRoot failed" + #define MSG_SD_CARD_OK "SD card ok" + #define MSG_SD_WORKDIR_FAIL "workDir open failed" + #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " + #define MSG_SD_FILE_OPENED "File opened:" + #define MSG_SD_SIZE " Size:" + #define MSG_SD_FILE_SELECTED "File selected" + #define MSG_SD_WRITE_TO_FILE "Writing to file: " + #define MSG_SD_PRINTING_BYTE "SD printing byte " + #define MSG_SD_NOT_PRINTING "Not SD printing" + #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" + #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:" + + #define MSG_STEPPER_TO_HIGH "Steprate to high : " + #define MSG_ENDSTOPS_HIT "endstops hit: " + #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" + #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" + +#endif + + +#if LANGUAGE_CHOICE == 5 + +// LCD Menu Messages +#define WELCOME_MSG MACHINE_NAME " Lista." +#define MSG_SD_INSERTED "Tarjeta SD Colocada" +#define MSG_SD_REMOVED "Tarjeta SD Retirada" +#define MSG_MAIN " Menu Principal \003" +#define MSG_AUTOSTART " Autostart" +#define MSG_DISABLE_STEPPERS " Apagar Motores" +#define MSG_AUTO_HOME " Llevar Ejes al Cero" +#define MSG_SET_ORIGIN " Establecer Cero" +#define MSG_COOLDOWN " Enfriar" +#define MSG_EXTRUDE " Extruir" +#define MSG_RETRACT " Retraer" +#define MSG_PREHEAT_PLA " Precalentar PLA" +#define MSG_PREHEAT_PLA_SETTINGS " Ajustar temp. PLA" +#define MSG_PREHEAT_ABS " Precalentar ABS" +#define MSG_PREHEAT_ABS_SETTINGS " Ajustar temp. ABS" +#define MSG_MOVE_AXIS " Mover Ejes \x7E" +#define MSG_SPEED " Velocidad:" +#define MSG_NOZZLE " \002Nozzle:" +#define MSG_NOZZLE1 " \002Nozzle2:" +#define MSG_NOZZLE2 " \002Nozzle3:" +#define MSG_BED " \002Base:" +#define MSG_FAN_SPEED " Ventilador:" +#define MSG_FLOW " Flujo:" +#define MSG_CONTROL " Control \003" +#define MSG_MIN " \002 Min:" +#define MSG_MAX " \002 Max:" +#define MSG_FACTOR " \002 Fact:" +#define MSG_AUTOTEMP " Autotemp:" +#define MSG_ON "On " +#define MSG_OFF "Off" +#define MSG_PID_P " PID-P: " +#define MSG_PID_I " PID-I: " +#define MSG_PID_D " PID-D: " +#define MSG_PID_C " PID-C: " +#define MSG_ACC " Acc:" +#define MSG_VXY_JERK " Vxy-jerk: " #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" -#define MSG_VMAX " Vmax " -#define MSG_X "x:" -#define MSG_Y "y:" -#define MSG_Z "z:" -#define MSG_E "e:" -#define MSG_VMIN " Vmin:" -#define MSG_VTRAV_MIN " VTrav min:" -#define MSG_AMAX " Amax " -#define MSG_A_RETRACT " A-retrac.:" -#define MSG_XSTEPS " Xpasos/mm:" -#define MSG_YSTEPS " Ypasos/mm:" -#define MSG_ZSTEPS " Zpasos/mm:" -#define MSG_ESTEPS " Epasos/mm:" -#define MSG_MAIN_WIDE " Menu Principal \003" -#define MSG_RECTRACT_WIDE " Retraer \x7E" -#define MSG_TEMPERATURE_WIDE " Temperatura \x7E" -#define MSG_TEMPERATURE_RTN " Temperatura \003" -#define MSG_MOTION_WIDE " Movimiento \x7E" -#define MSG_STORE_EPROM " Guardar Memoria" -#define MSG_LOAD_EPROM " Cargar Memoria" -#define MSG_RESTORE_FAILSAFE " Rest. de emergencia" -#define MSG_REFRESH "\004Volver a cargar" -#define MSG_WATCH " Monitorizar \003" -#define MSG_PREPARE " Preparar \x7E" -#define MSG_PREPARE_ALT " Preparar \003" -#define MSG_CONTROL_ARROW " Control \x7E" -#define MSG_RETRACT_ARROW " Retraer \x7E" -#define MSG_TUNE " Ajustar \x7E" -#define MSG_PAUSE_PRINT " Pausar Impresion \x7E" -#define MSG_RESUME_PRINT " Reanudar Impresion \x7E" -#define MSG_STOP_PRINT " Detener Impresion \x7E" -#define MSG_CARD_MENU " Menu de SD \x7E" -#define MSG_NO_CARD " No hay Tarjeta SD" -#define MSG_DWELL "Reposo..." -#define MSG_USERWAIT "Esperando Ordenes..." -#define MSG_NO_MOVE "Sin movimiento" -#define MSG_PART_RELEASE "Desacople Parcial" -#define MSG_KILLED "PARADA DE EMERGENCIA. " -#define MSG_STOPPED "PARADA. " -#define MSG_STEPPER_RELEASED "Desacoplada." -#define MSG_CONTROL_RETRACT " Retraer mm:" -#define MSG_CONTROL_RETRACTF " Retraer F:" -#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:" -#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:" -#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:" -#define MSG_AUTORETRACT " AutoRetr.:" -#define MSG_FILAMENTCHANGE "Change filament" -// Serial Console Messages - -#define MSG_Enqueing "En cola \"" -#define MSG_POWERUP "PowerUp" -#define MSG_EXTERNAL_RESET " Reset Externo" -#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" -#define MSG_WATCHDOG_RESET " Reset por Bloqueo" -#define MSG_SOFTWARE_RESET " Reset por Software" -#define MSG_MARLIN "Marlin " -#define MSG_AUTHOR " | Autor: " -#define MSG_CONFIGURATION_VER " Ultima actualizacion: " -#define MSG_FREE_MEMORY " Memoria libre: " -#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " -#define MSG_OK "ok" -#define MSG_FILE_SAVED "Guardado." -#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:" -#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:" -#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:" -#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:" -#define MSG_FILE_PRINTED "Impresion terminada" -#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos" -#define MSG_END_FILE_LIST "Fin de la lista de archivos" -#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " -#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " -#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido " -#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp" -#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " -#define MSG_HEATING "Calentando..." -#define MSG_HEATING_COMPLETE "Calentamiento Hecho." -#define MSG_BED_HEATING "Calentando la base." -#define MSG_BED_DONE "Base Caliente." -#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" -#define MSG_COUNT_X " Cuenta X:" -#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!" -#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)" -#define MSG_RESEND "Reenviar:" -#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\"" -#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " -#define MSG_INVALID_EXTRUDER "Extrusor Invalido" -#define MSG_X_MIN "x_min: " -#define MSG_X_MAX "x_max: " -#define MSG_Y_MIN "y_min: " -#define MSG_Y_MAX "y_max: " -#define MSG_Z_MIN "z_min: " -#define MSG_M119_REPORT "Comprobando fines de carrera." -#define MSG_ENDSTOP_HIT "PULSADO" -#define MSG_ENDSTOP_OPEN "abierto" -#define MSG_HOTEND_OFFSET "Hotend offsets:" - -#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." -#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" -#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" -#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz" -#define MSG_SD_CARD_OK "Tarjeta SD OK" -#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo" -#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: " -#define MSG_SD_FILE_OPENED "Archivo abierto:" -#define MSG_SD_SIZE " Tamaño:" -#define MSG_SD_FILE_SELECTED "Archivo Seleccionado" -#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: " -#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte " -#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD" -#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo" -#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:" - -#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : " -#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " -#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" -#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" - -#endif - -#if LANGUAGE_CHOICE == 6 - -// LCD Menu Messages -#define WELCOME_MSG MACHINE_NAME " Готов" -#define MSG_SD_INSERTED "Карта вставлена" -#define MSG_SD_REMOVED "Карта извлечена" -#define MSG_MAIN " Меню \003" -#define MSG_AUTOSTART " Автостарт " -#define MSG_DISABLE_STEPPERS " Выключить двигатели" -#define MSG_AUTO_HOME " Парковка " -#define MSG_SET_ORIGIN " Запомнить ноль " -#define MSG_PREHEAT_PLA " Преднагрев PLA " -#define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA" -#define MSG_PREHEAT_ABS " Преднагрев ABS " -#define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS" -#define MSG_COOLDOWN " Охлаждение " -#define MSG_EXTRUDE " Экструзия " -#define MSG_RETRACT " Откат" -#define MSG_MOVE_AXIS " Движение по осям \x7E" -#define MSG_SPEED " Скорость:" -#define MSG_NOZZLE " \002 Фильера:" -#define MSG_NOZZLE1 " \002 Фильера2:" -#define MSG_NOZZLE2 " \002 Фильера3:" -#define MSG_BED " \002 Кровать:" -#define MSG_FAN_SPEED " Куллер:" -#define MSG_FLOW " Поток:" -#define MSG_CONTROL " Настройки \003" -#define MSG_MIN " \002 Минимум:" -#define MSG_MAX " \002 Максимум:" -#define MSG_FACTOR " \002 Фактор:" -#define MSG_AUTOTEMP " Autotemp:" -#define MSG_ON "Вкл. " -#define MSG_OFF "Выкл. " -#define MSG_PID_P " PID-P: " -#define MSG_PID_I " PID-I: " -#define MSG_PID_D " PID-D: " -#define MSG_PID_C " PID-C: " -#define MSG_ACC " Acc:" -#define MSG_VXY_JERK " Vxy-jerk: " +#define MSG_VMAX " Vmax " +#define MSG_X "x:" +#define MSG_Y "y:" +#define MSG_Z "z:" +#define MSG_E "e:" +#define MSG_VMIN " Vmin:" +#define MSG_VTRAV_MIN " VTrav min:" +#define MSG_AMAX " Amax " +#define MSG_A_RETRACT " A-retrac.:" +#define MSG_XSTEPS " Xpasos/mm:" +#define MSG_YSTEPS " Ypasos/mm:" +#define MSG_ZSTEPS " Zpasos/mm:" +#define MSG_ESTEPS " Epasos/mm:" +#define MSG_MAIN_WIDE " Menu Principal \003" +#define MSG_RECTRACT_WIDE " Retraer \x7E" +#define MSG_TEMPERATURE_WIDE " Temperatura \x7E" +#define MSG_TEMPERATURE_RTN " Temperatura \003" +#define MSG_MOTION_WIDE " Movimiento \x7E" +#define MSG_STORE_EPROM " Guardar Memoria" +#define MSG_LOAD_EPROM " Cargar Memoria" +#define MSG_RESTORE_FAILSAFE " Rest. de emergencia" +#define MSG_REFRESH "\004Volver a cargar" +#define MSG_WATCH " Monitorizar \003" +#define MSG_PREPARE " Preparar \x7E" +#define MSG_PREPARE_ALT " Preparar \003" +#define MSG_CONTROL_ARROW " Control \x7E" +#define MSG_RETRACT_ARROW " Retraer \x7E" +#define MSG_TUNE " Ajustar \x7E" +#define MSG_PAUSE_PRINT " Pausar Impresion \x7E" +#define MSG_RESUME_PRINT " Reanudar Impresion \x7E" +#define MSG_STOP_PRINT " Detener Impresion \x7E" +#define MSG_CARD_MENU " Menu de SD \x7E" +#define MSG_NO_CARD " No hay Tarjeta SD" +#define MSG_DWELL "Reposo..." +#define MSG_USERWAIT "Esperando Ordenes..." +#define MSG_NO_MOVE "Sin movimiento" +#define MSG_PART_RELEASE "Desacople Parcial" +#define MSG_KILLED "PARADA DE EMERGENCIA. " +#define MSG_STOPPED "PARADA. " +#define MSG_STEPPER_RELEASED "Desacoplada." +#define MSG_CONTROL_RETRACT " Retraer mm:" +#define MSG_CONTROL_RETRACTF " Retraer F:" +#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:" +#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:" +#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:" +#define MSG_AUTORETRACT " AutoRetr.:" +#define MSG_FILAMENTCHANGE "Change filament" +// Serial Console Messages + +#define MSG_Enqueing "En cola \"" +#define MSG_POWERUP "PowerUp" +#define MSG_EXTERNAL_RESET " Reset Externo" +#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" +#define MSG_WATCHDOG_RESET " Reset por Bloqueo" +#define MSG_SOFTWARE_RESET " Reset por Software" +#define MSG_MARLIN "Marlin " +#define MSG_AUTHOR " | Autor: " +#define MSG_CONFIGURATION_VER " Ultima actualizacion: " +#define MSG_FREE_MEMORY " Memoria libre: " +#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " +#define MSG_OK "ok" +#define MSG_FILE_SAVED "Guardado." +#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:" +#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:" +#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:" +#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:" +#define MSG_FILE_PRINTED "Impresion terminada" +#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos" +#define MSG_END_FILE_LIST "Fin de la lista de archivos" +#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " +#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " +#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido " +#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp" +#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " +#define MSG_HEATING "Calentando..." +#define MSG_HEATING_COMPLETE "Calentamiento Hecho." +#define MSG_BED_HEATING "Calentando la base." +#define MSG_BED_DONE "Base Caliente." +#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" +#define MSG_COUNT_X " Cuenta X:" +#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!" +#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)" +#define MSG_RESEND "Reenviar:" +#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\"" +#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " +#define MSG_INVALID_EXTRUDER "Extrusor Invalido" +#define MSG_X_MIN "x_min: " +#define MSG_X_MAX "x_max: " +#define MSG_Y_MIN "y_min: " +#define MSG_Y_MAX "y_max: " +#define MSG_Z_MIN "z_min: " +#define MSG_M119_REPORT "Comprobando fines de carrera." +#define MSG_ENDSTOP_HIT "PULSADO" +#define MSG_ENDSTOP_OPEN "abierto" +#define MSG_HOTEND_OFFSET "Hotend offsets:" + +#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." +#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" +#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" +#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz" +#define MSG_SD_CARD_OK "Tarjeta SD OK" +#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo" +#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: " +#define MSG_SD_FILE_OPENED "Archivo abierto:" +#define MSG_SD_SIZE " Tamaño:" +#define MSG_SD_FILE_SELECTED "Archivo Seleccionado" +#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: " +#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte " +#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD" +#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo" +#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:" + +#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : " +#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " +#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" +#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" + +#endif + +#if LANGUAGE_CHOICE == 6 + +// LCD Menu Messages +#define WELCOME_MSG MACHINE_NAME " Готов" +#define MSG_SD_INSERTED "Карта вставлена" +#define MSG_SD_REMOVED "Карта извлечена" +#define MSG_MAIN " Меню \003" +#define MSG_AUTOSTART " Автостарт " +#define MSG_DISABLE_STEPPERS " Выключить двигатели" +#define MSG_AUTO_HOME " Парковка " +#define MSG_SET_ORIGIN " Запомнить ноль " +#define MSG_PREHEAT_PLA " Преднагрев PLA " +#define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA" +#define MSG_PREHEAT_ABS " Преднагрев ABS " +#define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS" +#define MSG_COOLDOWN " Охлаждение " +#define MSG_EXTRUDE " Экструзия " +#define MSG_RETRACT " Откат" +#define MSG_MOVE_AXIS " Движение по осям \x7E" +#define MSG_SPEED " Скорость:" +#define MSG_NOZZLE " \002 Фильера:" +#define MSG_NOZZLE1 " \002 Фильера2:" +#define MSG_NOZZLE2 " \002 Фильера3:" +#define MSG_BED " \002 Кровать:" +#define MSG_FAN_SPEED " Куллер:" +#define MSG_FLOW " Поток:" +#define MSG_CONTROL " Настройки \003" +#define MSG_MIN " \002 Минимум:" +#define MSG_MAX " \002 Максимум:" +#define MSG_FACTOR " \002 Фактор:" +#define MSG_AUTOTEMP " Autotemp:" +#define MSG_ON "Вкл. " +#define MSG_OFF "Выкл. " +#define MSG_PID_P " PID-P: " +#define MSG_PID_I " PID-I: " +#define MSG_PID_D " PID-D: " +#define MSG_PID_C " PID-C: " +#define MSG_ACC " Acc:" +#define MSG_VXY_JERK " Vxy-jerk: " #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" -#define MSG_VMAX " Vmax " -#define MSG_X "x:" -#define MSG_Y "y:" -#define MSG_Z "z:" -#define MSG_E "e:" -#define MSG_VMIN " Vmin:" -#define MSG_VTRAV_MIN " VTrav min:" -#define MSG_AMAX " Amax " -#define MSG_A_RETRACT " A-retract:" -#define MSG_XSTEPS " X шаг/mm:" -#define MSG_YSTEPS " Y шаг/mm:" -#define MSG_ZSTEPS " Z шаг/mm:" -#define MSG_ESTEPS " E шаг/mm:" -#define MSG_RECTRACT " Откат подачи \x7E" -#define MSG_TEMPERATURE " Температура \x7E" -#define MSG_MOTION " Скорости \x7E" -#define MSG_STORE_EPROM " Сохранить настройки" -#define MSG_LOAD_EPROM " Загрузить настройки" -#define MSG_RESTORE_FAILSAFE " Сброс настроек " -#define MSG_REFRESH "\004Обновить " -#define MSG_WATCH " Обзор \003" -#define MSG_PREPARE " Действия \x7E" -#define MSG_TUNE " Настройки \x7E" -#define MSG_PAUSE_PRINT " Пауза печати \x7E" -#define MSG_RESUME_PRINT " Продолжить печать \x7E" -#define MSG_STOP_PRINT " Остановить печать \x7E" -#define MSG_CARD_MENU " Меню карты \x7E" -#define MSG_NO_CARD " Нет карты" -#define MSG_DWELL "Сон..." -#define MSG_USERWAIT "Нажмите для продолж." -#define MSG_NO_MOVE "Нет движения. " -#define MSG_PART_RELEASE " Извлечение принта " -#define MSG_KILLED "УБИТО. " -#define MSG_STOPPED "ОСТАНОВЛЕНО. " -#define MSG_CONTROL_RETRACT " Откат mm:" -#define MSG_CONTROL_RETRACTF " Откат F:" -#define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:" -#define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:" -#define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:" -#define MSG_AUTORETRACT " АвтоОткат:" -#define MSG_FILAMENTCHANGE "Change filament" - -// Serial Console Messages - -#define MSG_Enqueing "Запланировано \"" -#define MSG_POWERUP "Включение питания" -#define MSG_EXTERNAL_RESET " Внешний сброс" -#define MSG_BROWNOUT_RESET " Brown out сброс" -#define MSG_WATCHDOG_RESET " Watchdog сброс" -#define MSG_SOFTWARE_RESET " программный сброс" -#define MSG_MARLIN "Marlin " -#define MSG_AUTHOR " | Автор: " -#define MSG_CONFIGURATION_VER " Последнее обновление: " -#define MSG_FREE_MEMORY " Памяти свободно: " -#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: " -#define MSG_OK "ok" -#define MSG_FILE_SAVED "Файл записан." -#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:" -#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:" -#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:" -#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:" -#define MSG_FILE_PRINTED "Печать файла завершена" -#define MSG_BEGIN_FILE_LIST "Список файлов" -#define MSG_END_FILE_LIST "Конец списка файлов" -#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера " -#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера " -#define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера " -#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры" -#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера " -#define MSG_HEATING "Нагрев... " -#define MSG_HEATING_COMPLETE "Наргето. " -#define MSG_BED_HEATING "Нагрев стола... " -#define MSG_BED_DONE "Стол нагрет. " -#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" -#define MSG_COUNT_X " Count X:" -#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!" -#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)" -#define MSG_RESEND "Переотправка:" -#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\"" -#define MSG_ACTIVE_EXTRUDER "Активный экструдер: " -#define MSG_INVALID_EXTRUDER "Ошибка экструдера" -#define MSG_X_MIN "x_min:" -#define MSG_X_MAX "x_max:" -#define MSG_Y_MIN "y_min:" -#define MSG_Y_MAX "y_max:" -#define MSG_Z_MIN "z_min:" -#define MSG_Z_MAX "z_max:" -#define MSG_M119_REPORT "Статус концевиков" -#define MSG_ENDSTOP_HIT "Срабатывание концевика" -#define MSG_ENDSTOP_OPEN "Концевик освобожден" -#define MSG_HOTEND_OFFSET "Hotend offsets:" -#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку" -#define MSG_SD_INIT_FAIL "Ошибка инициализации SD" -#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела" -#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня" -#define MSG_SD_CARD_OK "SD карта в порядке" -#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку" -#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: " -#define MSG_SD_FILE_OPENED "Файл открыт:" -#define MSG_SD_SIZE " Размер:" -#define MSG_SD_FILE_SELECTED "Файл выбран" -#define MSG_SD_WRITE_TO_FILE "Запись в файл: " -#define MSG_SD_PRINTING_BYTE "SD печать byte " -#define MSG_SD_NOT_PRINTING "нет SD печати" -#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл" -#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:" -#define MSG_STEPPER_TO_HIGH "Частота шагов очень высока : " -#define MSG_ENDSTOPS_HIT "концевик сработал: " -#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии" -#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии" - -#endif - - -#if LANGUAGE_CHOICE == 7 - - // LCD Menu Messages - #define WELCOME_MSG MACHINE_NAME " Pronto." - #define MSG_SD_INSERTED "SD Card inserita" - #define MSG_SD_REMOVED "SD Card rimossa" - #define MSG_MAIN "Menu principale" - #define MSG_AUTOSTART "Autostart" - #define MSG_DISABLE_STEPPERS "Disabilita Motori" - #define MSG_AUTO_HOME "Auto Home" - #define MSG_SET_ORIGIN "Imposta Origine" - #define MSG_PREHEAT_PLA "Preriscalda PLA" - #define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf" - #define MSG_PREHEAT_ABS "Preriscalda ABS" - #define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf" - #define MSG_COOLDOWN "Rafredda" - #define MSG_EXTRUDE "Estrudi" - #define MSG_RETRACT "Ritrai" - #define MSG_MOVE_AXIS "Muovi Asse" - #define MSG_SPEED "Velcità" - #define MSG_NOZZLE "Ugello" - #define MSG_NOZZLE1 "Ugello2" - #define MSG_NOZZLE2 "Ugello3" - #define MSG_BED "Piatto" - #define MSG_FAN_SPEED "Ventola" - #define MSG_FLOW "Flusso" - #define MSG_CONTROL "Controllo" - #define MSG_MIN " \002 Min:" - #define MSG_MAX " \002 Max:" - #define MSG_FACTOR " \002 Fact:" - #define MSG_AUTOTEMP "Autotemp" - #define MSG_ON "On " - #define MSG_OFF "Off" - #define MSG_PID_P "PID-P" - #define MSG_PID_I "PID-I" - #define MSG_PID_D "PID-D" - #define MSG_PID_C "PID-C" - #define MSG_ACC "Accel" - #define MSG_VXY_JERK "Vxy-jerk" +#define MSG_VMAX " Vmax " +#define MSG_X "x:" +#define MSG_Y "y:" +#define MSG_Z "z:" +#define MSG_E "e:" +#define MSG_VMIN " Vmin:" +#define MSG_VTRAV_MIN " VTrav min:" +#define MSG_AMAX " Amax " +#define MSG_A_RETRACT " A-retract:" +#define MSG_XSTEPS " X шаг/mm:" +#define MSG_YSTEPS " Y шаг/mm:" +#define MSG_ZSTEPS " Z шаг/mm:" +#define MSG_ESTEPS " E шаг/mm:" +#define MSG_RECTRACT " Откат подачи \x7E" +#define MSG_TEMPERATURE " Температура \x7E" +#define MSG_MOTION " Скорости \x7E" +#define MSG_STORE_EPROM " Сохранить настройки" +#define MSG_LOAD_EPROM " Загрузить настройки" +#define MSG_RESTORE_FAILSAFE " Сброс настроек " +#define MSG_REFRESH "\004Обновить " +#define MSG_WATCH " Обзор \003" +#define MSG_PREPARE " Действия \x7E" +#define MSG_TUNE " Настройки \x7E" +#define MSG_PAUSE_PRINT " Пауза печати \x7E" +#define MSG_RESUME_PRINT " Продолжить печать \x7E" +#define MSG_STOP_PRINT " Остановить печать \x7E" +#define MSG_CARD_MENU " Меню карты \x7E" +#define MSG_NO_CARD " Нет карты" +#define MSG_DWELL "Сон..." +#define MSG_USERWAIT "Нажмите для продолж." +#define MSG_NO_MOVE "Нет движения. " +#define MSG_PART_RELEASE " Извлечение принта " +#define MSG_KILLED "УБИТО. " +#define MSG_STOPPED "ОСТАНОВЛЕНО. " +#define MSG_CONTROL_RETRACT " Откат mm:" +#define MSG_CONTROL_RETRACTF " Откат F:" +#define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:" +#define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:" +#define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:" +#define MSG_AUTORETRACT " АвтоОткат:" +#define MSG_FILAMENTCHANGE "Change filament" + +// Serial Console Messages + +#define MSG_Enqueing "Запланировано \"" +#define MSG_POWERUP "Включение питания" +#define MSG_EXTERNAL_RESET " Внешний сброс" +#define MSG_BROWNOUT_RESET " Brown out сброс" +#define MSG_WATCHDOG_RESET " Watchdog сброс" +#define MSG_SOFTWARE_RESET " программный сброс" +#define MSG_MARLIN "Marlin " +#define MSG_AUTHOR " | Автор: " +#define MSG_CONFIGURATION_VER " Последнее обновление: " +#define MSG_FREE_MEMORY " Памяти свободно: " +#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: " +#define MSG_OK "ok" +#define MSG_FILE_SAVED "Файл записан." +#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:" +#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:" +#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:" +#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:" +#define MSG_FILE_PRINTED "Печать файла завершена" +#define MSG_BEGIN_FILE_LIST "Список файлов" +#define MSG_END_FILE_LIST "Конец списка файлов" +#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера " +#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера " +#define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера " +#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры" +#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера " +#define MSG_HEATING "Нагрев... " +#define MSG_HEATING_COMPLETE "Наргето. " +#define MSG_BED_HEATING "Нагрев стола... " +#define MSG_BED_DONE "Стол нагрет. " +#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" +#define MSG_COUNT_X " Count X:" +#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!" +#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)" +#define MSG_RESEND "Переотправка:" +#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\"" +#define MSG_ACTIVE_EXTRUDER "Активный экструдер: " +#define MSG_INVALID_EXTRUDER "Ошибка экструдера" +#define MSG_X_MIN "x_min:" +#define MSG_X_MAX "x_max:" +#define MSG_Y_MIN "y_min:" +#define MSG_Y_MAX "y_max:" +#define MSG_Z_MIN "z_min:" +#define MSG_Z_MAX "z_max:" +#define MSG_M119_REPORT "Статус концевиков" +#define MSG_ENDSTOP_HIT "Срабатывание концевика" +#define MSG_ENDSTOP_OPEN "Концевик освобожден" +#define MSG_HOTEND_OFFSET "Hotend offsets:" +#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку" +#define MSG_SD_INIT_FAIL "Ошибка инициализации SD" +#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела" +#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня" +#define MSG_SD_CARD_OK "SD карта в порядке" +#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку" +#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: " +#define MSG_SD_FILE_OPENED "Файл открыт:" +#define MSG_SD_SIZE " Размер:" +#define MSG_SD_FILE_SELECTED "Файл выбран" +#define MSG_SD_WRITE_TO_FILE "Запись в файл: " +#define MSG_SD_PRINTING_BYTE "SD печать byte " +#define MSG_SD_NOT_PRINTING "нет SD печати" +#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл" +#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:" +#define MSG_STEPPER_TO_HIGH "Частота шагов очень высока : " +#define MSG_ENDSTOPS_HIT "концевик сработал: " +#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии" +#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии" + +#endif + + +#if LANGUAGE_CHOICE == 7 + + // LCD Menu Messages + #define WELCOME_MSG MACHINE_NAME " Pronto." + #define MSG_SD_INSERTED "SD Card inserita" + #define MSG_SD_REMOVED "SD Card rimossa" + #define MSG_MAIN "Menu principale" + #define MSG_AUTOSTART "Autostart" + #define MSG_DISABLE_STEPPERS "Disabilita Motori" + #define MSG_AUTO_HOME "Auto Home" + #define MSG_SET_ORIGIN "Imposta Origine" + #define MSG_PREHEAT_PLA "Preriscalda PLA" + #define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf" + #define MSG_PREHEAT_ABS "Preriscalda ABS" + #define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf" + #define MSG_COOLDOWN "Rafredda" + #define MSG_EXTRUDE "Estrudi" + #define MSG_RETRACT "Ritrai" + #define MSG_MOVE_AXIS "Muovi Asse" + #define MSG_SPEED "Velcità" + #define MSG_NOZZLE "Ugello" + #define MSG_NOZZLE1 "Ugello2" + #define MSG_NOZZLE2 "Ugello3" + #define MSG_BED "Piatto" + #define MSG_FAN_SPEED "Ventola" + #define MSG_FLOW "Flusso" + #define MSG_CONTROL "Controllo" + #define MSG_MIN " \002 Min:" + #define MSG_MAX " \002 Max:" + #define MSG_FACTOR " \002 Fact:" + #define MSG_AUTOTEMP "Autotemp" + #define MSG_ON "On " + #define MSG_OFF "Off" + #define MSG_PID_P "PID-P" + #define MSG_PID_I "PID-I" + #define MSG_PID_D "PID-D" + #define MSG_PID_C "PID-C" + #define MSG_ACC "Accel" + #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" - #define MSG_VMAX "Vmax" - #define MSG_X "x" - #define MSG_Y "y" - #define MSG_Z "z" - #define MSG_E "e" - #define MSG_VMIN "Vmin" - #define MSG_VTRAV_MIN "VTrav min" - #define MSG_AMAX "Amax" - #define MSG_A_RETRACT "A-retract" - #define MSG_XSTEPS "Xpassi/mm" - #define MSG_YSTEPS "Ypassi/mm" - #define MSG_ZSTEPS "Zpassi/mm" - #define MSG_ESTEPS "Epassi/mm" - #define MSG_RECTRACT "Ritrai" - #define MSG_TEMPERATURE "Temperatura" - #define MSG_MOTION "Movimento" - #define MSG_STORE_EPROM "Salva in EEPROM" - #define MSG_LOAD_EPROM "Carica da EEPROM" - #define MSG_RESTORE_FAILSAFE "Impostaz. default" - #define MSG_REFRESH "Aggiorna" - #define MSG_WATCH "Guarda" - #define MSG_PREPARE "Prepara" - #define MSG_TUNE "Adatta" - #define MSG_PAUSE_PRINT "Pausa" - #define MSG_RESUME_PRINT "Riprendi Stampa" - #define MSG_STOP_PRINT "Arresta Stampa" - #define MSG_CARD_MENU "SD Card Menu" - #define MSG_NO_CARD "No SD Card" - #define MSG_DWELL "Sospensione..." - #define MSG_USERWAIT "Attendi Utente..." - #define MSG_RESUMING "Riprendi Stampa" - #define MSG_NO_MOVE "Nessun Movimento." - #define MSG_KILLED "UCCISO. " - #define MSG_STOPPED "ARRESTATO. " - #define MSG_CONTROL_RETRACT "Ritrai mm" - #define MSG_CONTROL_RETRACTF "Ritrai F" - #define MSG_CONTROL_RETRACT_ZLIFT "Salta mm" - #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" - #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" - #define MSG_AUTORETRACT "AutoArretramento" - #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure." - #define MSG_FILAMENTCHANGE "Cambia filamento" - #define MSG_INIT_SDCARD "Iniz. SD-Card" - #define MSG_CNG_SDCARD "Cambia SD-Card" - - // Serial Console Messages - - #define MSG_Enqueing "accodamento \"" - #define MSG_POWERUP "Accensione" - #define MSG_EXTERNAL_RESET " Reset Esterno" - #define MSG_BROWNOUT_RESET " Brown out Reset" - #define MSG_WATCHDOG_RESET " Watchdog Reset" - #define MSG_SOFTWARE_RESET " Software Reset" - #define MSG_MARLIN "Marlin " - #define MSG_AUTHOR " | Autore: " - #define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: " - #define MSG_FREE_MEMORY " Memoria Libera: " - #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " - #define MSG_OK "ok" - #define MSG_FILE_SAVED "File Salvato." - #define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: " - #define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: " - #define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: " - #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: " - #define MSG_FILE_PRINTED "File stampato" - #define MSG_BEGIN_FILE_LIST "Inizio Lista File" - #define MSG_END_FILE_LIST "Fine Lista File" - #define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido " - #define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido " - #define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido " - #define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura" - #define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido " - #define MSG_HEATING "Riscaldamento..." - #define MSG_HEATING_COMPLETE "Stampante Calda." - #define MSG_BED_HEATING "Riscaldamento Piatto." - #define MSG_BED_DONE "Piatto Pronto." - #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" - #define MSG_COUNT_X " Calcola X: " - #define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!" - #define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)" - #define MSG_RESEND "Reinviato:" - #define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \"" - #define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: " - #define MSG_INVALID_EXTRUDER "Estrusore non valido" - #define MSG_X_MIN "x_min: " - #define MSG_X_MAX "x_max: " - #define MSG_Y_MIN "y_min: " - #define MSG_Y_MAX "y_max: " - #define MSG_Z_MIN "z_min: " - #define MSG_Z_MAX "z_max: " - #define MSG_M119_REPORT "Segnalazione stato degli endstop" - #define MSG_ENDSTOP_HIT "INNESCATO" - #define MSG_ENDSTOP_OPEN "aperto" - #define MSG_HOTEND_OFFSET "Hotend offsets:" - - #define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella" - #define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD" - #define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume" - #define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale" - #define MSG_SD_CARD_OK "SD card ok" - #define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro" - #define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: " - #define MSG_SD_FILE_OPENED "File aperto: " - #define MSG_SD_SIZE " Dimensione: " - #define MSG_SD_FILE_SELECTED "File selezionato" - #define MSG_SD_WRITE_TO_FILE "Scrittura su file: " - #define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD " - #define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD" - #define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file" - #define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: " - - #define MSG_STEPPER_TO_HIGH "Steprate troppo alto: " - #define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: " - #define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda" - #define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga" - -#endif - - -#if LANGUAGE_CHOICE == 8 - -// LCD Menu Messages - #define WELCOME_MSG MACHINE_NAME " Pronta." - #define MSG_SD_INSERTED "Cartao SD inserido" - #define MSG_SD_REMOVED "Cartao SD removido" - #define MSG_MAIN " Menu Principal \003" - #define MSG_AUTOSTART " Autostart" - #define MSG_DISABLE_STEPPERS " Apagar Motores" - #define MSG_AUTO_HOME " Ir para Origen" - #define MSG_SET_ORIGIN " Estabelecer Origen" - #define MSG_PREHEAT_PLA " pre-aquecer PLA" - #define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting" - #define MSG_PREHEAT_ABS " pre-aquecer ABS" - #define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting" - #define MSG_COOLDOWN " Esfriar" - #define MSG_EXTRUDE " Extrudar" - #define MSG_RETRACT " Retrair" - #define MSG_PREHEAT_PLA " pre-aquecer PLA" - #define MSG_PREHEAT_ABS " pre-aquecer ABS" - #define MSG_MOVE_AXIS " Mover eixo \x7E" - #define MSG_SPEED " Velocidade:" - #define MSG_NOZZLE " \002Nozzle:" - #define MSG_NOZZLE1 " \002Nozzle2:" - #define MSG_NOZZLE2 " \002Nozzle3:" - #define MSG_BED " \002Base:" - #define MSG_FAN_SPEED " Velocidade Ventoinha:" - #define MSG_FLOW " Fluxo:" - #define MSG_CONTROL " Controle \003" - #define MSG_MIN " \002 Min:" - #define MSG_MAX " \002 Max:" - #define MSG_FACTOR " \002 Fact:" - #define MSG_AUTOTEMP " Autotemp:" - #define MSG_ON "On " - #define MSG_OFF "Off" - #define MSG_PID_P " PID-P: " - #define MSG_PID_I " PID-I: " - #define MSG_PID_D " PID-D: " - #define MSG_PID_C " PID-C: " - #define MSG_ACC " Acc:" - #define MSG_VXY_JERK " Vxy-jerk: " + #define MSG_VMAX "Vmax" + #define MSG_X "x" + #define MSG_Y "y" + #define MSG_Z "z" + #define MSG_E "e" + #define MSG_VMIN "Vmin" + #define MSG_VTRAV_MIN "VTrav min" + #define MSG_AMAX "Amax" + #define MSG_A_RETRACT "A-retract" + #define MSG_XSTEPS "Xpassi/mm" + #define MSG_YSTEPS "Ypassi/mm" + #define MSG_ZSTEPS "Zpassi/mm" + #define MSG_ESTEPS "Epassi/mm" + #define MSG_RECTRACT "Ritrai" + #define MSG_TEMPERATURE "Temperatura" + #define MSG_MOTION "Movimento" + #define MSG_STORE_EPROM "Salva in EEPROM" + #define MSG_LOAD_EPROM "Carica da EEPROM" + #define MSG_RESTORE_FAILSAFE "Impostaz. default" + #define MSG_REFRESH "Aggiorna" + #define MSG_WATCH "Guarda" + #define MSG_PREPARE "Prepara" + #define MSG_TUNE "Adatta" + #define MSG_PAUSE_PRINT "Pausa" + #define MSG_RESUME_PRINT "Riprendi Stampa" + #define MSG_STOP_PRINT "Arresta Stampa" + #define MSG_CARD_MENU "SD Card Menu" + #define MSG_NO_CARD "No SD Card" + #define MSG_DWELL "Sospensione..." + #define MSG_USERWAIT "Attendi Utente..." + #define MSG_RESUMING "Riprendi Stampa" + #define MSG_NO_MOVE "Nessun Movimento." + #define MSG_KILLED "UCCISO. " + #define MSG_STOPPED "ARRESTATO. " + #define MSG_CONTROL_RETRACT "Ritrai mm" + #define MSG_CONTROL_RETRACTF "Ritrai F" + #define MSG_CONTROL_RETRACT_ZLIFT "Salta mm" + #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" + #define MSG_AUTORETRACT "AutoArretramento" + #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure." + #define MSG_FILAMENTCHANGE "Cambia filamento" + #define MSG_INIT_SDCARD "Iniz. SD-Card" + #define MSG_CNG_SDCARD "Cambia SD-Card" + + // Serial Console Messages + + #define MSG_Enqueing "accodamento \"" + #define MSG_POWERUP "Accensione" + #define MSG_EXTERNAL_RESET " Reset Esterno" + #define MSG_BROWNOUT_RESET " Brown out Reset" + #define MSG_WATCHDOG_RESET " Watchdog Reset" + #define MSG_SOFTWARE_RESET " Software Reset" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Autore: " + #define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: " + #define MSG_FREE_MEMORY " Memoria Libera: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "File Salvato." + #define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: " + #define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: " + #define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: " + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: " + #define MSG_FILE_PRINTED "File stampato" + #define MSG_BEGIN_FILE_LIST "Inizio Lista File" + #define MSG_END_FILE_LIST "Fine Lista File" + #define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido " + #define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido " + #define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido " + #define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura" + #define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido " + #define MSG_HEATING "Riscaldamento..." + #define MSG_HEATING_COMPLETE "Stampante Calda." + #define MSG_BED_HEATING "Riscaldamento Piatto." + #define MSG_BED_DONE "Piatto Pronto." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Calcola X: " + #define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!" + #define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)" + #define MSG_RESEND "Reinviato:" + #define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \"" + #define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: " + #define MSG_INVALID_EXTRUDER "Estrusore non valido" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Segnalazione stato degli endstop" + #define MSG_ENDSTOP_HIT "INNESCATO" + #define MSG_ENDSTOP_OPEN "aperto" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella" + #define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD" + #define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume" + #define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale" + #define MSG_SD_CARD_OK "SD card ok" + #define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro" + #define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: " + #define MSG_SD_FILE_OPENED "File aperto: " + #define MSG_SD_SIZE " Dimensione: " + #define MSG_SD_FILE_SELECTED "File selezionato" + #define MSG_SD_WRITE_TO_FILE "Scrittura su file: " + #define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD " + #define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD" + #define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file" + #define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: " + + #define MSG_STEPPER_TO_HIGH "Steprate troppo alto: " + #define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: " + #define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda" + #define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga" + +#endif + + +#if LANGUAGE_CHOICE == 8 + +// LCD Menu Messages + #define WELCOME_MSG MACHINE_NAME " Pronta." + #define MSG_SD_INSERTED "Cartao SD inserido" + #define MSG_SD_REMOVED "Cartao SD removido" + #define MSG_MAIN " Menu Principal \003" + #define MSG_AUTOSTART " Autostart" + #define MSG_DISABLE_STEPPERS " Apagar Motores" + #define MSG_AUTO_HOME " Ir para Origen" + #define MSG_SET_ORIGIN " Estabelecer Origen" + #define MSG_PREHEAT_PLA " pre-aquecer PLA" + #define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting" + #define MSG_PREHEAT_ABS " pre-aquecer ABS" + #define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting" + #define MSG_COOLDOWN " Esfriar" + #define MSG_EXTRUDE " Extrudar" + #define MSG_RETRACT " Retrair" + #define MSG_PREHEAT_PLA " pre-aquecer PLA" + #define MSG_PREHEAT_ABS " pre-aquecer ABS" + #define MSG_MOVE_AXIS " Mover eixo \x7E" + #define MSG_SPEED " Velocidade:" + #define MSG_NOZZLE " \002Nozzle:" + #define MSG_NOZZLE1 " \002Nozzle2:" + #define MSG_NOZZLE2 " \002Nozzle3:" + #define MSG_BED " \002Base:" + #define MSG_FAN_SPEED " Velocidade Ventoinha:" + #define MSG_FLOW " Fluxo:" + #define MSG_CONTROL " Controle \003" + #define MSG_MIN " \002 Min:" + #define MSG_MAX " \002 Max:" + #define MSG_FACTOR " \002 Fact:" + #define MSG_AUTOTEMP " Autotemp:" + #define MSG_ON "On " + #define MSG_OFF "Off" + #define MSG_PID_P " PID-P: " + #define MSG_PID_I " PID-I: " + #define MSG_PID_D " PID-D: " + #define MSG_PID_C " PID-C: " + #define MSG_ACC " Acc:" + #define MSG_VXY_JERK " Vxy-jerk: " #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" - #define MSG_VMAX " Vmax " - #define MSG_X "x:" - #define MSG_Y "y:" - #define MSG_Z "z:" - #define MSG_E "e:" - #define MSG_VMIN " Vmin:" - #define MSG_VTRAV_MIN " VTrav min:" - #define MSG_AMAX " Amax " - #define MSG_A_RETRACT " A-retract:" - #define MSG_XSTEPS " Xpasso/mm:" - #define MSG_YSTEPS " Ypasso/mm:" - #define MSG_ZSTEPS " Zpasso/mm:" - #define MSG_ESTEPS " Epasso/mm:" - #define MSG_MAIN_WIDE " Menu Principal \003" - #define MSG_RECTRACT_WIDE " Retrair \x7E" - #define MSG_TEMPERATURE_WIDE " Temperatura \x7E" - #define MSG_TEMPERATURE_RTN " Temperatura \003" - #define MSG_MOTION_WIDE " Movimento \x7E" - #define MSG_STORE_EPROM " Guardar memoria" - #define MSG_LOAD_EPROM " Carregar memoria" - #define MSG_RESTORE_FAILSAFE " Rest. de emergencia" - #define MSG_REFRESH "\004Recarregar" - #define MSG_WATCH " Monitorar \003" - #define MSG_PREPARE " Preparar \x7E" - #define MSG_PREPARE_ALT " Preparar \003" - #define MSG_CONTROL_ARROW " Controle \x7E" - #define MSG_RETRACT_ARROW " Retrair \x7E" - #define MSG_TUNE " Tune \x7E" - #define MSG_PAUSE_PRINT " Pausar Impressao \x7E" - #define MSG_RESUME_PRINT " Resumir Impressao \x7E" - #define MSG_STOP_PRINT " Parar Impressao \x7E" - #define MSG_CARD_MENU " Menu cartao SD \x7E" - #define MSG_NO_CARD " Sem cartao SD" - #define MSG_DWELL "Repouso..." - #define MSG_USERWAIT "Esperando Ordem..." - #define MSG_NO_MOVE "Sem movimento." - #define MSG_PART_RELEASE "Lancamento Parcial" - #define MSG_KILLED "PARADA DE EMERGENCIA. " - #define MSG_STOPPED "PARADA. " - #define MSG_STEPPER_RELEASED "Lancado." - #define MSG_CONTROL_RETRACT " Retrair mm:" - #define MSG_CONTROL_RETRACTF " Retrair F:" - #define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:" - #define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:" - #define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:" - #define MSG_AUTORETRACT " AutoRetr.:" - #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu." - #define MSG_FILAMENTCHANGE "Change filament" - -// Serial Console Messages - - #define MSG_Enqueing "enqueing \"" - #define MSG_POWERUP "PowerUp" - #define MSG_EXTERNAL_RESET " Reset Externo" - #define MSG_BROWNOUT_RESET " Reset por voltagem incorreta" - #define MSG_WATCHDOG_RESET " Reset por Bloqueio" - #define MSG_SOFTWARE_RESET " Reset por Software" - #define MSG_MARLIN "Marlin " - #define MSG_AUTHOR " | Author: " - #define MSG_CONFIGURATION_VER " Ultima atualizacao: " - #define MSG_FREE_MEMORY " memoria Livre: " - #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " - #define MSG_OK "ok" - #define MSG_FILE_SAVED "Guardado." - #define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:" - #define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:" - #define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :" - #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:" - #define MSG_FILE_PRINTED "Impressao terminada" - #define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos" - #define MSG_END_FILE_LIST "Fim da lista de arquivos" - #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido " - #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido " - #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido " - #define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp" - #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido " - #define MSG_HEATING "Aquecendo..." - #define MSG_HEATING_COMPLETE "Aquecido." - #define MSG_BED_HEATING "Aquecendo a Base." - #define MSG_BED_DONE "Base quente." - #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" - #define MSG_COUNT_X " Conta X:" - #define MSG_ERR_KILLED "Impressora parada com kill() !!" - #define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)" - #define MSG_RESEND "Reenviar:" - #define MSG_UNKNOWN_COMMAND "Comando desconhecido:\"" - #define MSG_ACTIVE_EXTRUDER "Extrusor ativo: " - #define MSG_INVALID_EXTRUDER "Extrusor invalido" - #define MSG_X_MIN "x_min: " - #define MSG_X_MAX "x_max: " - #define MSG_Y_MIN "y_min: " - #define MSG_Y_MAX "y_max: " - #define MSG_Z_MIN "z_min: " - #define MSG_Z_MAX "z_max: " - #define MSG_M119_REPORT "Relatando estado do ponto final" - #define MSG_ENDSTOP_HIT "PULSADO" - #define MSG_ENDSTOP_OPEN "Aberto" - #define MSG_HOTEND_OFFSET "Hotend offsets:" - - #define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio" - #define MSG_SD_INIT_FAIL "Falha ao iniciar SD" - #define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume" - #define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz" - #define MSG_SD_CARD_OK "cartao SD ok" - #define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho" - #define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: " - #define MSG_SD_FILE_OPENED "Arquivo aberto:" - #define MSG_SD_SIZE " Size:" - #define MSG_SD_FILE_SELECTED "Arquivo selecionado" - #define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: " - #define MSG_SD_PRINTING_BYTE "SD imprimindo o byte " - #define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD" - #define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo" - #define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:" - - #define MSG_STEPPER_TO_HIGH "Steprate muito alto : " - #define MSG_ENDSTOPS_HIT "O ponto final foi tocado: " - #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada" - #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada" - - -#endif - - - -#if LANGUAGE_CHOICE == 9 - -// Finnish - -// LCD Menu Messages - #define WELCOME_MSG MACHINE_NAME " valmis" - #define MSG_SD_INSERTED "Kortti asetettu" - #define MSG_SD_REMOVED "Kortti poistettu" - #define MSG_MAIN "Palaa" - #define MSG_AUTOSTART "Automaatti" - #define MSG_DISABLE_STEPPERS "Vapauta moottorit" - #define MSG_AUTO_HOME "Aja referenssiin" - #define MSG_SET_ORIGIN "Aseta origo" - #define MSG_PREHEAT_PLA "Esilammita PLA" - #define MSG_PREHEAT_PLA_SETTINGS "Esilammita PLA konf" - #define MSG_PREHEAT_ABS "Esilammita ABS" - #define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf" - #define MSG_COOLDOWN "Jaahdyta" - #define MSG_EXTRUDE "Pursota" - #define MSG_RETRACT "Veda takaisin" - #define MSG_MOVE_AXIS "Liikuta akseleita" - #define MSG_SPEED "Nopeus" - #define MSG_NOZZLE "Suutin" - #define MSG_NOZZLE1 "Suutin2" - #define MSG_NOZZLE2 "Suutin3" - #define MSG_BED "Alusta" - #define MSG_FAN_SPEED "Tuul. nopeus" - #define MSG_FLOW "Virtaus" - #define MSG_CONTROL "Kontrolli" - #define MSG_MIN " \002 Min" - #define MSG_MAX " \002 Max" - #define MSG_FACTOR " \002 Kerr" - #define MSG_AUTOTEMP "Autotemp" - #define MSG_ON "On " - #define MSG_OFF "Off" - #define MSG_PID_P "PID-P" - #define MSG_PID_I "PID-I" - #define MSG_PID_D "PID-D" - #define MSG_PID_C "PID-C" - #define MSG_ACC "Kiihtyv" - #define MSG_VXY_JERK "Vxy-jerk" + #define MSG_VMAX " Vmax " + #define MSG_X "x:" + #define MSG_Y "y:" + #define MSG_Z "z:" + #define MSG_E "e:" + #define MSG_VMIN " Vmin:" + #define MSG_VTRAV_MIN " VTrav min:" + #define MSG_AMAX " Amax " + #define MSG_A_RETRACT " A-retract:" + #define MSG_XSTEPS " Xpasso/mm:" + #define MSG_YSTEPS " Ypasso/mm:" + #define MSG_ZSTEPS " Zpasso/mm:" + #define MSG_ESTEPS " Epasso/mm:" + #define MSG_MAIN_WIDE " Menu Principal \003" + #define MSG_RECTRACT_WIDE " Retrair \x7E" + #define MSG_TEMPERATURE_WIDE " Temperatura \x7E" + #define MSG_TEMPERATURE_RTN " Temperatura \003" + #define MSG_MOTION_WIDE " Movimento \x7E" + #define MSG_STORE_EPROM " Guardar memoria" + #define MSG_LOAD_EPROM " Carregar memoria" + #define MSG_RESTORE_FAILSAFE " Rest. de emergencia" + #define MSG_REFRESH "\004Recarregar" + #define MSG_WATCH " Monitorar \003" + #define MSG_PREPARE " Preparar \x7E" + #define MSG_PREPARE_ALT " Preparar \003" + #define MSG_CONTROL_ARROW " Controle \x7E" + #define MSG_RETRACT_ARROW " Retrair \x7E" + #define MSG_TUNE " Tune \x7E" + #define MSG_PAUSE_PRINT " Pausar Impressao \x7E" + #define MSG_RESUME_PRINT " Resumir Impressao \x7E" + #define MSG_STOP_PRINT " Parar Impressao \x7E" + #define MSG_CARD_MENU " Menu cartao SD \x7E" + #define MSG_NO_CARD " Sem cartao SD" + #define MSG_DWELL "Repouso..." + #define MSG_USERWAIT "Esperando Ordem..." + #define MSG_NO_MOVE "Sem movimento." + #define MSG_PART_RELEASE "Lancamento Parcial" + #define MSG_KILLED "PARADA DE EMERGENCIA. " + #define MSG_STOPPED "PARADA. " + #define MSG_STEPPER_RELEASED "Lancado." + #define MSG_CONTROL_RETRACT " Retrair mm:" + #define MSG_CONTROL_RETRACTF " Retrair F:" + #define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:" + #define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:" + #define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:" + #define MSG_AUTORETRACT " AutoRetr.:" + #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu." + #define MSG_FILAMENTCHANGE "Change filament" + +// Serial Console Messages + + #define MSG_Enqueing "enqueing \"" + #define MSG_POWERUP "PowerUp" + #define MSG_EXTERNAL_RESET " Reset Externo" + #define MSG_BROWNOUT_RESET " Reset por voltagem incorreta" + #define MSG_WATCHDOG_RESET " Reset por Bloqueio" + #define MSG_SOFTWARE_RESET " Reset por Software" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Author: " + #define MSG_CONFIGURATION_VER " Ultima atualizacao: " + #define MSG_FREE_MEMORY " memoria Livre: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Guardado." + #define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:" + #define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:" + #define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :" + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:" + #define MSG_FILE_PRINTED "Impressao terminada" + #define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos" + #define MSG_END_FILE_LIST "Fim da lista de arquivos" + #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido " + #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido " + #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido " + #define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp" + #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido " + #define MSG_HEATING "Aquecendo..." + #define MSG_HEATING_COMPLETE "Aquecido." + #define MSG_BED_HEATING "Aquecendo a Base." + #define MSG_BED_DONE "Base quente." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Conta X:" + #define MSG_ERR_KILLED "Impressora parada com kill() !!" + #define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)" + #define MSG_RESEND "Reenviar:" + #define MSG_UNKNOWN_COMMAND "Comando desconhecido:\"" + #define MSG_ACTIVE_EXTRUDER "Extrusor ativo: " + #define MSG_INVALID_EXTRUDER "Extrusor invalido" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Relatando estado do ponto final" + #define MSG_ENDSTOP_HIT "PULSADO" + #define MSG_ENDSTOP_OPEN "Aberto" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio" + #define MSG_SD_INIT_FAIL "Falha ao iniciar SD" + #define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume" + #define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz" + #define MSG_SD_CARD_OK "cartao SD ok" + #define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho" + #define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: " + #define MSG_SD_FILE_OPENED "Arquivo aberto:" + #define MSG_SD_SIZE " Size:" + #define MSG_SD_FILE_SELECTED "Arquivo selecionado" + #define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: " + #define MSG_SD_PRINTING_BYTE "SD imprimindo o byte " + #define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD" + #define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo" + #define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:" + + #define MSG_STEPPER_TO_HIGH "Steprate muito alto : " + #define MSG_ENDSTOPS_HIT "O ponto final foi tocado: " + #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada" + #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada" + + +#endif + + + +#if LANGUAGE_CHOICE == 9 + +// Finnish + +// LCD Menu Messages + #define WELCOME_MSG MACHINE_NAME " valmis" + #define MSG_SD_INSERTED "Kortti asetettu" + #define MSG_SD_REMOVED "Kortti poistettu" + #define MSG_MAIN "Palaa" + #define MSG_AUTOSTART "Automaatti" + #define MSG_DISABLE_STEPPERS "Vapauta moottorit" + #define MSG_AUTO_HOME "Aja referenssiin" + #define MSG_SET_ORIGIN "Aseta origo" + #define MSG_PREHEAT_PLA "Esilammita PLA" + #define MSG_PREHEAT_PLA_SETTINGS "Esilammita PLA konf" + #define MSG_PREHEAT_ABS "Esilammita ABS" + #define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf" + #define MSG_COOLDOWN "Jaahdyta" + #define MSG_EXTRUDE "Pursota" + #define MSG_RETRACT "Veda takaisin" + #define MSG_MOVE_AXIS "Liikuta akseleita" + #define MSG_SPEED "Nopeus" + #define MSG_NOZZLE "Suutin" + #define MSG_NOZZLE1 "Suutin2" + #define MSG_NOZZLE2 "Suutin3" + #define MSG_BED "Alusta" + #define MSG_FAN_SPEED "Tuul. nopeus" + #define MSG_FLOW "Virtaus" + #define MSG_CONTROL "Kontrolli" + #define MSG_MIN " \002 Min" + #define MSG_MAX " \002 Max" + #define MSG_FACTOR " \002 Kerr" + #define MSG_AUTOTEMP "Autotemp" + #define MSG_ON "On " + #define MSG_OFF "Off" + #define MSG_PID_P "PID-P" + #define MSG_PID_I "PID-I" + #define MSG_PID_D "PID-D" + #define MSG_PID_C "PID-C" + #define MSG_ACC "Kiihtyv" + #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" - #define MSG_VMAX "Vmax " - #define MSG_X "x" - #define MSG_Y "y" - #define MSG_Z "z" - #define MSG_E "e" - #define MSG_VMIN "Vmin" - #define MSG_VTRAV_MIN "VLiike min" - #define MSG_AMAX "Amax " - #define MSG_A_RETRACT "A-peruuta" - #define MSG_XSTEPS "Xsteps/mm" - #define MSG_YSTEPS "Ysteps/mm" - #define MSG_ZSTEPS "Zsteps/mm" - #define MSG_ESTEPS "Esteps/mm" - #define MSG_RECTRACT "Veda takaisin" - #define MSG_TEMPERATURE "Lampotila" - #define MSG_MOTION "Liike" - #define MSG_STORE_EPROM "Tallenna muistiin" - #define MSG_LOAD_EPROM "Lataa muistista" - #define MSG_RESTORE_FAILSAFE "Palauta oletus" - #define MSG_REFRESH "Paivita" - #define MSG_WATCH "Seuraa" - #define MSG_PREPARE "Valmistele" - #define MSG_TUNE "Saada" - #define MSG_PAUSE_PRINT "Keskeyta tulostus" - #define MSG_RESUME_PRINT "Jatka tulostusta" - #define MSG_STOP_PRINT "Pysayta tulostus" - #define MSG_CARD_MENU "Korttivalikko" - #define MSG_NO_CARD "Ei korttia" - #define MSG_DWELL "Nukkumassa..." - #define MSG_USERWAIT "Odotetaan valintaa..." - #define MSG_RESUMING "Jatketaan tulostusta" - #define MSG_NO_MOVE "Ei liiketta." - #define MSG_KILLED "KILLED. " - #define MSG_STOPPED "STOPPED. " - #define MSG_CONTROL_RETRACT "Veda mm" - #define MSG_CONTROL_RETRACTF "Veda F" - #define MSG_CONTROL_RETRACT_ZLIFT "Z mm" - #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" - #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" - #define MSG_AUTORETRACT "AutoVeto." - #define MSG_FILAMENTCHANGE "Change filament" - -// Serial Console Messages - - #define MSG_Enqueing "jonoon \"" - #define MSG_POWERUP "Kaynnistys" - #define MSG_EXTERNAL_RESET " Ulkoinen Reset" - #define MSG_BROWNOUT_RESET " Alajannite Reset" - #define MSG_WATCHDOG_RESET " Vahtikoira Reset" - #define MSG_SOFTWARE_RESET " Ohjelmisto Reset" - #define MSG_MARLIN "Marlin " - #define MSG_AUTHOR " | Author: " - #define MSG_CONFIGURATION_VER " Paivitetty viimeksi: " - #define MSG_FREE_MEMORY " Vapaata muistia: " - #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " - #define MSG_OK "ok" - #define MSG_FILE_SAVED "Tiedosto tallennettu." - #define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: " - #define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: " - #define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: " - #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: " - #define MSG_FILE_PRINTED "Tiedoston tulostus valmis" - #define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku" - #define MSG_END_FILE_LIST "Tiedostolistauksen loppu" - #define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin " - #define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin " - #define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin " - #define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja" - #define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin " - #define MSG_HEATING "Lammitan..." - #define MSG_HEATING_COMPLETE "Lammitys valmis." - #define MSG_BED_HEATING "Alusta lampiaa." - #define MSG_BED_DONE "Alusta valmis." - #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" - #define MSG_COUNT_X " Laskuri X: " - #define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!" - #define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)" - #define MSG_RESEND "Uudelleenlahetys: " - #define MSG_UNKNOWN_COMMAND "Tuntematon komento: \"" - #define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: " - #define MSG_INVALID_EXTRUDER "Virheellinen suutin" - #define MSG_X_MIN "x_min: " - #define MSG_X_MAX "x_max: " - #define MSG_Y_MIN "y_min: " - #define MSG_Y_MAX "y_max: " - #define MSG_Z_MIN "z_min: " - #define MSG_Z_MAX "z_max: " - #define MSG_M119_REPORT "Rajakytkimien tilaraportti" - #define MSG_ENDSTOP_HIT "AKTIIVISENA" - #define MSG_ENDSTOP_OPEN "avoinna" - #define MSG_HOTEND_OFFSET "Hotend offsets:" - - #define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata" - #define MSG_SD_INIT_FAIL "SD alustus epaonnistui" - #define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui" - #define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui" - #define MSG_SD_CARD_OK "SD kortti ok" - #define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui" - #define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: " - #define MSG_SD_FILE_OPENED "Tiedosto avattu: " - #define MSG_SD_SIZE " Koko: " - #define MSG_SD_FILE_SELECTED "Tiedosto valittu" - #define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: " - #define MSG_SD_PRINTING_BYTE "SD tulostus byte " - #define MSG_SD_NOT_PRINTING "Ei SD tulostus" - #define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon" - #define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: " - - #define MSG_STEPPER_TO_HIGH "Askellustaajuus liian suuri: " - #define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: " - #define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty" - #define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty" - -#endif -#endif // ifndef LANGUAGE_H + #define MSG_VMAX "Vmax " + #define MSG_X "x" + #define MSG_Y "y" + #define MSG_Z "z" + #define MSG_E "e" + #define MSG_VMIN "Vmin" + #define MSG_VTRAV_MIN "VLiike min" + #define MSG_AMAX "Amax " + #define MSG_A_RETRACT "A-peruuta" + #define MSG_XSTEPS "Xsteps/mm" + #define MSG_YSTEPS "Ysteps/mm" + #define MSG_ZSTEPS "Zsteps/mm" + #define MSG_ESTEPS "Esteps/mm" + #define MSG_RECTRACT "Veda takaisin" + #define MSG_TEMPERATURE "Lampotila" + #define MSG_MOTION "Liike" + #define MSG_STORE_EPROM "Tallenna muistiin" + #define MSG_LOAD_EPROM "Lataa muistista" + #define MSG_RESTORE_FAILSAFE "Palauta oletus" + #define MSG_REFRESH "Paivita" + #define MSG_WATCH "Seuraa" + #define MSG_PREPARE "Valmistele" + #define MSG_TUNE "Saada" + #define MSG_PAUSE_PRINT "Keskeyta tulostus" + #define MSG_RESUME_PRINT "Jatka tulostusta" + #define MSG_STOP_PRINT "Pysayta tulostus" + #define MSG_CARD_MENU "Korttivalikko" + #define MSG_NO_CARD "Ei korttia" + #define MSG_DWELL "Nukkumassa..." + #define MSG_USERWAIT "Odotetaan valintaa..." + #define MSG_RESUMING "Jatketaan tulostusta" + #define MSG_NO_MOVE "Ei liiketta." + #define MSG_KILLED "KILLED. " + #define MSG_STOPPED "STOPPED. " + #define MSG_CONTROL_RETRACT "Veda mm" + #define MSG_CONTROL_RETRACTF "Veda F" + #define MSG_CONTROL_RETRACT_ZLIFT "Z mm" + #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" + #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" + #define MSG_AUTORETRACT "AutoVeto." + #define MSG_FILAMENTCHANGE "Change filament" + +// Serial Console Messages + + #define MSG_Enqueing "jonoon \"" + #define MSG_POWERUP "Kaynnistys" + #define MSG_EXTERNAL_RESET " Ulkoinen Reset" + #define MSG_BROWNOUT_RESET " Alajannite Reset" + #define MSG_WATCHDOG_RESET " Vahtikoira Reset" + #define MSG_SOFTWARE_RESET " Ohjelmisto Reset" + #define MSG_MARLIN "Marlin " + #define MSG_AUTHOR " | Author: " + #define MSG_CONFIGURATION_VER " Paivitetty viimeksi: " + #define MSG_FREE_MEMORY " Vapaata muistia: " + #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " + #define MSG_OK "ok" + #define MSG_FILE_SAVED "Tiedosto tallennettu." + #define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: " + #define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: " + #define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: " + #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: " + #define MSG_FILE_PRINTED "Tiedoston tulostus valmis" + #define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku" + #define MSG_END_FILE_LIST "Tiedostolistauksen loppu" + #define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin " + #define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin " + #define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin " + #define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja" + #define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin " + #define MSG_HEATING "Lammitan..." + #define MSG_HEATING_COMPLETE "Lammitys valmis." + #define MSG_BED_HEATING "Alusta lampiaa." + #define MSG_BED_DONE "Alusta valmis." + #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" + #define MSG_COUNT_X " Laskuri X: " + #define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!" + #define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)" + #define MSG_RESEND "Uudelleenlahetys: " + #define MSG_UNKNOWN_COMMAND "Tuntematon komento: \"" + #define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: " + #define MSG_INVALID_EXTRUDER "Virheellinen suutin" + #define MSG_X_MIN "x_min: " + #define MSG_X_MAX "x_max: " + #define MSG_Y_MIN "y_min: " + #define MSG_Y_MAX "y_max: " + #define MSG_Z_MIN "z_min: " + #define MSG_Z_MAX "z_max: " + #define MSG_M119_REPORT "Rajakytkimien tilaraportti" + #define MSG_ENDSTOP_HIT "AKTIIVISENA" + #define MSG_ENDSTOP_OPEN "avoinna" + #define MSG_HOTEND_OFFSET "Hotend offsets:" + + #define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata" + #define MSG_SD_INIT_FAIL "SD alustus epaonnistui" + #define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui" + #define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui" + #define MSG_SD_CARD_OK "SD kortti ok" + #define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui" + #define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: " + #define MSG_SD_FILE_OPENED "Tiedosto avattu: " + #define MSG_SD_SIZE " Koko: " + #define MSG_SD_FILE_SELECTED "Tiedosto valittu" + #define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: " + #define MSG_SD_PRINTING_BYTE "SD tulostus byte " + #define MSG_SD_NOT_PRINTING "Ei SD tulostus" + #define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon" + #define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: " + + #define MSG_STEPPER_TO_HIGH "Askellustaajuus liian suuri: " + #define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: " + #define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty" + #define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty" + +#endif +#endif // ifndef LANGUAGE_H