From 724f5aa36bcd5e59db7b7eebede16488dba654c4 Mon Sep 17 00:00:00 2001 From: Daid Date: Mon, 10 Dec 2012 12:06:30 +0100 Subject: [PATCH 1/3] Update on makefile for moved Arduino addons. --- Marlin/Makefile | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Marlin/Makefile b/Marlin/Makefile index dee6eccbe..930a20071 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -173,7 +173,11 @@ F_CPU ?= 16000000 ifeq ($(HARDWARE_VARIANT), arduino) HARDWARE_SRC = $(ARDUINO_INSTALL_DIR)/hardware/arduino/cores/arduino else -HARDWARE_SRC = $(HARDWARE_VARIANT)/cores/arduino +ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true) +HARDWARE_SRC = ../ArduinoAddons/Arduino_1.x.x/$(HARDWARE_VARIANT)/cores/arduino +else +HARDWARE_SRC = ../ArduinoAddons/Arduino_0.xx/$(HARDWARE_VARIANT)/cores/arduino +endif endif TARGET = $(notdir $(CURDIR)) From 1f45cb0a5171a00c9b25565720d9f2b1fae3da43 Mon Sep 17 00:00:00 2001 From: Johann Rocholl Date: Tue, 11 Dec 2012 01:54:40 -0800 Subject: [PATCH 2/3] Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments. --- Marlin/Configuration.h | 4 ++-- Marlin/Configuration_adv.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 9db8dee5f..842b06064 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -256,8 +256,8 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th #define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS) // The position of the homing switches -//#define MANUAL_HOME_POSITIONS // If defined, manualy programed locations will be used -//#define BED_CENTER_AT_0_0 // If defined the center of the bed is defined as (0,0) +//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used +//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0) //Manual homing switch locations: #define MANUAL_X_HOME_POS 0 diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index be66d1805..b74f74ad8 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -78,7 +78,7 @@ //// AUTOSET LOCATIONS OF LIMIT SWITCHES //// Added by ZetaPhoenix 09-15-2012 -#ifdef MANUAL_HOME_POSITION //Use manual limit switch locations +#ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations #define X_HOME_POS MANUAL_X_HOME_POS #define Y_HOME_POS MANUAL_Y_HOME_POS #define Z_HOME_POS MANUAL_Z_HOME_POS From ca409e5531d6f96b54ce919aaf41cfad9e565dda Mon Sep 17 00:00:00 2001 From: Johann Rocholl Date: Tue, 11 Dec 2012 01:59:48 -0800 Subject: [PATCH 3/3] Fix X/Y/Z_MIN_PIN for Printrboard. --- Marlin/pins.h | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/Marlin/pins.h b/Marlin/pins.h index 59f86a5ac..8e9680b72 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -973,19 +973,16 @@ #define X_STEP_PIN 0 #define X_DIR_PIN 1 #define X_ENABLE_PIN 39 -#define X_MIN_PIN 13 #define X_MAX_PIN -1 #define Y_STEP_PIN 2 #define Y_DIR_PIN 3 #define Y_ENABLE_PIN 38 -#define Y_MIN_PIN 14 #define Y_MAX_PIN -1 #define Z_STEP_PIN 4 #define Z_DIR_PIN 5 #define Z_ENABLE_PIN 23 -#define Z_MIN_PIN 15 #define Z_MAX_PIN -1 #define E0_STEP_PIN 6 @@ -997,11 +994,19 @@ #define HEATER_2_PIN -1 #define HEATER_BED_PIN 20 // Bed #define FAN_PIN 22 // Fan +// You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h +// for the fan and Teensyduino uses a different pin mapping. -#if MOTHERBOARD == 8 +#if MOTHERBOARD == 8 // Teensylu + #define X_MIN_PIN 13 + #define Y_MIN_PIN 14 + #define Z_MIN_PIN 15 #define TEMP_0_PIN 7 // Extruder / Analog pin numbering #define TEMP_BED_PIN 6 // Bed / Analog pin numbering -#else +#else // Printrboard + #define X_MIN_PIN 35 + #define Y_MIN_PIN 8 + #define Z_MIN_PIN 36 #define TEMP_0_PIN 1 // Extruder / Analog pin numbering #define TEMP_BED_PIN 0 // Bed / Analog pin numbering #endif