MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Support for two switching extruders

Browse Source
This commit is contained in:
Scott Lahteine 2017-06-19 16:54:37 -05:00
parent 17f69f8ca2
commit 907cafcbfd
5 changed files with 75 additions and 49 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Marlin/Configuration.h
View File

@ -142,7 +142,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles

63
Marlin/Marlin_main.cpp
View File

@ -9843,25 +9843,41 @@ inline void gcode_M999() {
} }
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
inline void move_extruder_servo(uint8_t e) { #if EXTRUDERS > 3
const int angles[2] = SWITCHING_EXTRUDER_SERVO_ANGLES; #define REQ_ANGLES 4
MOVE_SERVO(SWITCHING_EXTRUDER_SERVO_NR, angles[e]); #define _SERVO_NR (e < 2 ? SWITCHING_EXTRUDER_SERVO_NR : SWITCHING_EXTRUDER_E23_SERVO_NR)
safe_delay(500); #else
#define REQ_ANGLES 2
#define _SERVO_NR SWITCHING_EXTRUDER_SERVO_NR
#endif
inline void move_extruder_servo(const uint8_t e) {
constexpr int16_t angles[] = SWITCHING_EXTRUDER_SERVO_ANGLES;
static_assert(COUNT(angles) == REQ_ANGLES, "SWITCHING_EXTRUDER_SERVO_ANGLES needs " STRINGIFY(REQ_ANGLES) " angles.");
stepper.synchronize();
#if EXTRUDERS & 1
if (e < EXTRUDERS - 1)
#endif
{
MOVE_SERVO(_SERVO_NR, angles[e]);
safe_delay(500);
}
} }
#endif #endif // SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
inline void move_nozzle_servo(uint8_t e) { inline void move_nozzle_servo(const uint8_t e) {
const int angles[2] = SWITCHING_NOZZLE_SERVO_ANGLES; const int16_t angles[2] = SWITCHING_NOZZLE_SERVO_ANGLES;
stepper.synchronize();
MOVE_SERVO(SWITCHING_NOZZLE_SERVO_NR, angles[e]); MOVE_SERVO(SWITCHING_NOZZLE_SERVO_NR, angles[e]);
safe_delay(500); safe_delay(500);
} }
#endif #endif
inline void invalid_extruder_error(const uint8_t &e) { inline void invalid_extruder_error(const uint8_t e) {
SERIAL_ECHO_START(); SERIAL_ECHO_START();
SERIAL_CHAR('T'); SERIAL_CHAR('T');
SERIAL_ECHO_F(e, DEC); SERIAL_ECHO_F(e, DEC);
SERIAL_CHAR(' ');
SERIAL_ECHOLN(MSG_INVALID_EXTRUDER); SERIAL_ECHOLN(MSG_INVALID_EXTRUDER);
} }
@ -9881,10 +9897,10 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#else // !MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1 #else // !MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1
#if HOTENDS > 1 if (tmp_extruder >= EXTRUDERS)
return invalid_extruder_error(tmp_extruder);
if (tmp_extruder >= EXTRUDERS) #if HOTENDS > 1
return invalid_extruder_error(tmp_extruder);
const float old_feedrate_mm_s = fr_mm_s > 0.0 ? fr_mm_s : feedrate_mm_s; const float old_feedrate_mm_s = fr_mm_s > 0.0 ? fr_mm_s : feedrate_mm_s;
@ -10006,6 +10022,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#else // !DUAL_X_CARRIAGE #else // !DUAL_X_CARRIAGE
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#define DONT_SWITCH (SWITCHING_EXTRUDER_SERVO_NR == SWITCHING_NOZZLE_SERVO_NR)
// <0 if the new nozzle is higher, >0 if lower. A bigger raise when lower. // <0 if the new nozzle is higher, >0 if lower. A bigger raise when lower.
const float z_diff = hotend_offset[Z_AXIS][active_extruder] - hotend_offset[Z_AXIS][tmp_extruder], const float z_diff = hotend_offset[Z_AXIS][active_extruder] - hotend_offset[Z_AXIS][tmp_extruder],
z_raise = 0.3 + (z_diff > 0.0 ? z_diff : 0.0); z_raise = 0.3 + (z_diff > 0.0 ? z_diff : 0.0);
@ -10013,16 +10030,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
// Always raise by some amount (destination copied from current_position earlier) // Always raise by some amount (destination copied from current_position earlier)
current_position[Z_AXIS] += z_raise; current_position[Z_AXIS] += z_raise;
planner.buffer_line_kinematic(current_position, planner.max_feedrate_mm_s[Z_AXIS], active_extruder); planner.buffer_line_kinematic(current_position, planner.max_feedrate_mm_s[Z_AXIS], active_extruder);
stepper.synchronize(); move_nozzle_servo(tmp_extruder);
move_nozzle_servo(active_extruder);
#endif
#if ENABLED(SWITCHING_EXTRUDER)
#if !(ENABLED(SWITCHING_NOZZLE) && (SWITCHING_EXTRUDER_SERVO_NR == SWITCHING_NOZZLE_SERVO_NR))
stepper.synchronize();
move_extruder_servo(active_extruder);
#endif
#endif #endif
/** /**
@ -10167,19 +10175,18 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#else // HOTENDS <= 1 #else // HOTENDS <= 1
// Set the new active extruder
active_extruder = tmp_extruder;
UNUSED(fr_mm_s); UNUSED(fr_mm_s);
UNUSED(no_move); UNUSED(no_move);
#if ENABLED(SWITCHING_EXTRUDER) // Set the new active extruder
stepper.synchronize(); active_extruder = tmp_extruder;
move_extruder_servo(active_extruder);
#endif
#endif // HOTENDS <= 1 #endif // HOTENDS <= 1
#if ENABLED(SWITCHING_EXTRUDER) && !DONT_SWITCH
move_extruder_servo(active_extruder);
#endif
SERIAL_ECHO_START(); SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(MSG_ACTIVE_EXTRUDER, (int)active_extruder); SERIAL_ECHOLNPAIR(MSG_ACTIVE_EXTRUDER, (int)active_extruder);

28
Marlin/SanityCheck.h
View File

@ -355,12 +355,14 @@
#endif #endif
/** /**
* A dual nozzle x-carriage with switching servo * A Dual Nozzle carriage with switching servo
*/ */
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
#if ENABLED(SINGLENOZZLE) #if ENABLED(DUAL_X_CARRIAGE)
#error "SWITCHING_NOZZLE and DUAL_X_CARRIAGE are incompatible."
#elif ENABLED(SINGLENOZZLE)
#error "SWITCHING_NOZZLE and SINGLENOZZLE are incompatible." #error "SWITCHING_NOZZLE and SINGLENOZZLE are incompatible."
#elif EXTRUDERS < 2 #elif EXTRUDERS != 2
#error "SWITCHING_NOZZLE requires exactly 2 EXTRUDERS." #error "SWITCHING_NOZZLE requires exactly 2 EXTRUDERS."
#elif NUM_SERVOS < 1 #elif NUM_SERVOS < 1
#error "SWITCHING_NOZZLE requires NUM_SERVOS >= 1." #error "SWITCHING_NOZZLE requires NUM_SERVOS >= 1."
@ -370,14 +372,8 @@
/** /**
* Single Stepper Dual Extruder with switching servo * Single Stepper Dual Extruder with switching servo
*/ */
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER) && NUM_SERVOS < 1
#if ENABLED(DUAL_X_CARRIAGE) #error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1."
#error "SWITCHING_EXTRUDER and DUAL_X_CARRIAGE are incompatible."
#elif EXTRUDERS != 2
#error "SWITCHING_EXTRUDER requires exactly 2 EXTRUDERS."
#elif NUM_SERVOS < 1
#error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1."
#endif
#endif #endif
/** /**
@ -938,21 +934,21 @@ static_assert(1 >= 0
#endif #endif
/** /**
* Test Extruder Pins * Test Extruder Stepper Pins
*/ */
#if EXTRUDERS > 4 #if E_STEPPERS > 4
#if !PIN_EXISTS(E4_STEP) || !PIN_EXISTS(E4_DIR) || !PIN_EXISTS(E4_ENABLE) #if !PIN_EXISTS(E4_STEP) || !PIN_EXISTS(E4_DIR) || !PIN_EXISTS(E4_ENABLE)
#error "E4_STEP_PIN, E4_DIR_PIN, or E4_ENABLE_PIN not defined for this board." #error "E4_STEP_PIN, E4_DIR_PIN, or E4_ENABLE_PIN not defined for this board."
#endif #endif
#elif EXTRUDERS > 3 #elif E_STEPPERS > 3
#if !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE) #if !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE)
#error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board." #error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
#endif #endif
#elif EXTRUDERS > 2 #elif E_STEPPERS > 2
#if !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE) #if !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE)
#error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board." #error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
#endif #endif
#elif EXTRUDERS > 1 #elif E_STEPPERS > 1
#if !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE) #if !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE)
#error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board." #error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
#endif #endif

12
Marlin/pins.h
View File

@ -330,7 +330,17 @@
#define _E3_PINS #define _E3_PINS
#define _E4_PINS #define _E4_PINS
#if EXTRUDERS > 1 #if ENABLED(SWITCHING_EXTRUDER)
// Tools 0 and 1 use E0
#if EXTRUDERS > 2 // Tools 2 and 3 use E1
#undef _E1_PINS
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN,
#if EXTRUDERS > 4 // Tools 4 and 5 use E2
#undef _E2_PINS
#define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN,
#endif
#endif
#elif EXTRUDERS > 1
#undef _E1_PINS #undef _E1_PINS
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN,
#if EXTRUDERS > 2 #if EXTRUDERS > 2

16
Marlin/stepper_indirection.h
View File

@ -416,9 +416,19 @@
* Extruder indirection for the single E axis * Extruder indirection for the single E axis
*/ */
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define E_STEP_WRITE(v) E0_STEP_WRITE(v) #if EXTRUDERS == 2
#define NORM_E_DIR() E0_DIR_WRITE(current_block->active_extruder ? INVERT_E0_DIR : !INVERT_E0_DIR) #define E_STEP_WRITE(v) E0_STEP_WRITE(v)
#define REV_E_DIR() E0_DIR_WRITE(current_block->active_extruder ? !INVERT_E0_DIR : INVERT_E0_DIR) #define NORM_E_DIR() E0_DIR_WRITE(current_block->active_extruder ? INVERT_E0_DIR : !INVERT_E0_DIR)
#define REV_E_DIR() E0_DIR_WRITE(current_block->active_extruder ? !INVERT_E0_DIR : INVERT_E0_DIR)
#elif EXTRUDERS > 4
#define E_STEP_WRITE(v) { if (current_block->active_extruder < 2) E0_STEP_WRITE(v); else if (current_block->active_extruder < 4) E1_STEP_WRITE(v); else E2_STEP_WRITE(v); }
#define NORM_E_DIR() { switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(INVERT_E1_DIR); break; case 4: E2_DIR_WRITE(!INVERT_E2_DIR); } }
#define REV_E_DIR() { switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 4: E2_DIR_WRITE(INVERT_E2_DIR); } }
#elif EXTRUDERS > 2
#define E_STEP_WRITE(v) { if (current_block->active_extruder < 2) E0_STEP_WRITE(v); else if (current_block->active_extruder < 4) E1_STEP_WRITE(v); else E1_STEP_WRITE(v); }
#define NORM_E_DIR() { switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(INVERT_E1_DIR); } }
#define REV_E_DIR() { switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(INVERT_E0_DIR); break; case 1: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 2: E1_DIR_WRITE(INVERT_E1_DIR); break; case 3: E1_DIR_WRITE(!INVERT_E1_DIR); } }
#endif
#elif EXTRUDERS > 4 #elif EXTRUDERS > 4
#define E_STEP_WRITE(v) { switch (current_block->active_extruder) { case 0: E0_STEP_WRITE(v); break; case 1: E1_STEP_WRITE(v); break; case 2: E2_STEP_WRITE(v); break; case 3: E3_STEP_WRITE(v); break; case 4: E4_STEP_WRITE(v); } } #define E_STEP_WRITE(v) { switch (current_block->active_extruder) { case 0: E0_STEP_WRITE(v); break; case 1: E1_STEP_WRITE(v); break; case 2: E2_STEP_WRITE(v); break; case 3: E3_STEP_WRITE(v); break; case 4: E4_STEP_WRITE(v); } }
#define NORM_E_DIR() { switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); } } #define NORM_E_DIR() { switch (current_block->active_extruder) { case 0: E0_DIR_WRITE(!INVERT_E0_DIR); break; case 1: E1_DIR_WRITE(!INVERT_E1_DIR); break; case 2: E2_DIR_WRITE(!INVERT_E2_DIR); break; case 3: E3_DIR_WRITE(!INVERT_E3_DIR); break; case 4: E4_DIR_WRITE(!INVERT_E4_DIR); } }