MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fix capitalization of counter_m

Browse Source
This commit is contained in:
Scott Lahteine 2016-09-02 11:31:45 -05:00
parent 42b5616327
commit 9bf78ef465
2 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
Marlin/stepper.cpp
View File

@ -115,7 +115,7 @@ volatile long Stepper::count_position[NUM_AXIS] = { 0 };
volatile signed char Stepper::count_direction[NUM_AXIS] = { 1, 1, 1, 1 }; volatile signed char Stepper::count_direction[NUM_AXIS] = { 1, 1, 1, 1 };
#if ENABLED(MIXING_EXTRUDER) #if ENABLED(MIXING_EXTRUDER)
long Stepper::counter_M[MIXING_STEPPERS]; long Stepper::counter_m[MIXING_STEPPERS];
#endif #endif
unsigned short Stepper::acc_step_rate; // needed for deceleration start point unsigned short Stepper::acc_step_rate; // needed for deceleration start point
@ -340,7 +340,7 @@ void Stepper::isr() {
#if ENABLED(MIXING_EXTRUDER) #if ENABLED(MIXING_EXTRUDER)
MIXING_STEPPERS_LOOP(i) MIXING_STEPPERS_LOOP(i)
counter_M[i] = -(current_block->mix_event_count[i] >> 1); counter_m[i] = -(current_block->mix_event_count[i] >> 1);
#endif #endif
step_events_completed = 0; step_events_completed = 0;
@ -487,9 +487,9 @@ void Stepper::isr() {
// Tick the counters used for this mix // Tick the counters used for this mix
MIXING_STEPPERS_LOOP(j) { MIXING_STEPPERS_LOOP(j) {
// Step mixing steppers (proportionally) // Step mixing steppers (proportionally)
counter_M[j] += current_block->steps[E_AXIS]; counter_m[j] += current_block->steps[E_AXIS];
// Step when the counter goes over zero // Step when the counter goes over zero
if (counter_M[j] > 0) En_STEP_WRITE(j, !INVERT_E_STEP_PIN); if (counter_m[j] > 0) En_STEP_WRITE(j, !INVERT_E_STEP_PIN);
} }
#else // !MIXING_EXTRUDER #else // !MIXING_EXTRUDER
PULSE_START(E); PULSE_START(E);
@ -520,8 +520,8 @@ void Stepper::isr() {
count_position[E_AXIS] += count_direction[E_AXIS]; count_position[E_AXIS] += count_direction[E_AXIS];
} }
MIXING_STEPPERS_LOOP(j) { MIXING_STEPPERS_LOOP(j) {
if (counter_M[j] > 0) { if (counter_m[j] > 0) {
counter_M[j] -= current_block->mix_event_count[j]; counter_m[j] -= current_block->mix_event_count[j];
En_STEP_WRITE(j, INVERT_E_STEP_PIN); En_STEP_WRITE(j, INVERT_E_STEP_PIN);
} }
} }

2
Marlin/stepper.h
View File

@ -152,7 +152,7 @@ class Stepper {
// Mixing extruder mix counters // Mixing extruder mix counters
// //
#if ENABLED(MIXING_EXTRUDER) #if ENABLED(MIXING_EXTRUDER)
static long counter_M[MIXING_STEPPERS]; static long counter_m[MIXING_STEPPERS];
#define MIXING_STEPPERS_LOOP(VAR) \ #define MIXING_STEPPERS_LOOP(VAR) \
for (uint8_t VAR = 0; VAR < MIXING_STEPPERS; VAR++) \ for (uint8_t VAR = 0; VAR < MIXING_STEPPERS; VAR++) \
if (current_block->mix_event_count[VAR]) if (current_block->mix_event_count[VAR])