MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

More featureful CR-10S configuration

Browse Source
This commit is contained in:
Scott Lahteine 2018-01-15 01:01:16 -06:00
parent 175207659a
commit a16ae30a61
2 changed files with 18 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Marlin/example_configurations/Creality/CR-10S/Configuration.h
View File

@ -620,7 +620,7 @@
* Use G29 repeatedly, adjusting the Z height at each point with movement commands * Use G29 repeatedly, adjusting the Z height at each point with movement commands
* or (with LCD_BED_LEVELING) the LCD controller. * or (with LCD_BED_LEVELING) the LCD controller.
*/ */
//#define PROBE_MANUALLY #define PROBE_MANUALLY
/** /**
* A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
@ -768,7 +768,7 @@
//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed //#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... #define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
// Be sure you have this distance over your Z_MAX_POS in case. // Be sure you have this distance over your Z_MAX_POS in case.
// Direction of endstops when homing; 1=MAX, -1=MIN // Direction of endstops when homing; 1=MAX, -1=MIN
@ -871,9 +871,9 @@
*/ */
//#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_LINEAR
//#define AUTO_BED_LEVELING_BILINEAR #define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL //#define AUTO_BED_LEVELING_UBL
#define MESH_BED_LEVELING //#define MESH_BED_LEVELING
/** /**
* Enable detailed logging of G28, G29, M48, etc. * Enable detailed logging of G28, G29, M48, etc.
@ -1114,7 +1114,7 @@
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// //
#define EEPROM_SETTINGS // Enable for M500 and M501 commands #define EEPROM_SETTINGS // Enable for M500 and M501 commands
#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
// //

16
Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
View File

@ -123,7 +123,7 @@
#endif #endif
// Show extra position information in M114 // Show extra position information in M114
//#define M114_DETAIL #define M114_DETAIL
// Show Temperature ADC value // Show Temperature ADC value
// Enable for M105 to include ADC values read from temperature sensors. // Enable for M105 to include ADC values read from temperature sensors.
@ -471,7 +471,7 @@
// @section lcd // @section lcd
// Include a page of printer information in the LCD Main Menu // Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU #define LCD_INFO_MENU
// Leave out seldom-used LCD menu items to recover some Program Memory // Leave out seldom-used LCD menu items to recover some Program Memory
//#define SLIM_LCD_MENUS //#define SLIM_LCD_MENUS
@ -552,7 +552,7 @@
#define FOLDER_SORTING -1 // -1=above 0=none 1=below #define FOLDER_SORTING -1 // -1=above 0=none 1=below
#define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code.
#define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting.
#define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
#define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
#define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
@ -582,7 +582,7 @@
//#define LONG_FILENAME_HOST_SUPPORT //#define LONG_FILENAME_HOST_SUPPORT
// Enable this option to scroll long filenames in the SD card menu // Enable this option to scroll long filenames in the SD card menu
//#define SCROLL_LONG_FILENAMES #define SCROLL_LONG_FILENAMES
/** /**
* This option allows you to abort SD printing when any endstop is triggered. * This option allows you to abort SD printing when any endstop is triggered.
@ -614,7 +614,7 @@
*/ */
#if ENABLED(DOGLCD) #if ENABLED(DOGLCD)
// Show SD percentage next to the progress bar // Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT #define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME #define XYZ_HOLLOW_FRAME
@ -736,7 +736,7 @@
// //
// G2/G3 Arc Support // G2/G3 Arc Support
// //
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment
#define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections
@ -821,7 +821,7 @@
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410
// Does not work on boards using AT90USB (USBCON) processors! // Does not work on boards using AT90USB (USBCON) processors!
//#define EMERGENCY_PARSER #define EMERGENCY_PARSER
// Bad Serial-connections can miss a received command by sending an 'ok' // Bad Serial-connections can miss a received command by sending an 'ok'
// Therefore some clients abort after 30 seconds in a timeout. // Therefore some clients abort after 30 seconds in a timeout.
@ -830,7 +830,7 @@
//#define NO_TIMEOUTS 1000 // Milliseconds //#define NO_TIMEOUTS 1000 // Milliseconds
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
//#define ADVANCED_OK #define ADVANCED_OK
// @section extras // @section extras