Update Marlin_main.cpp

This commit is contained in:
Wurstnase 2015-03-07 16:47:53 +01:00
parent 62bd734612
commit a5342c942e

View File

@ -5038,18 +5038,18 @@ void controllerFan()
if ((millis() - lastMotorCheck) >= 2500) //Not a time critical function, so we only check every 2500ms
{
lastMotorCheck = millis();
if((!READ(X_ENABLE_PIN) ^ !(X_ENABLE_ON)) || (!READ(Y_ENABLE_PIN) ^ !(Y_ENABLE_ON)) || (!READ(Z_ENABLE_PIN) ^ !(Z_ENABLE_ON)) || (soft_pwm_bed > 0)
if((READ(X_ENABLE_PIN) == (X_ENABLE_ON)) || (READ(Y_ENABLE_PIN) == (Y_ENABLE_ON)) || (READ(Z_ENABLE_PIN) == (Z_ENABLE_ON)) || (soft_pwm_bed > 0)
#if EXTRUDERS > 2
|| (!READ(E2_ENABLE_PIN) ^ !(E_ENABLE_ON))
|| (READ(E2_ENABLE_PIN) == (E_ENABLE_ON))
#endif
#if EXTRUDER > 1
#if defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1
|| (!READ(X2_ENABLE_PIN) ^ !(X_ENABLE_ON))
|| (READ(X2_ENABLE_PIN) == (X_ENABLE_ON))
#endif
|| (!READ(E1_ENABLE_PIN) ^ !(E_ENABLE_ON))
|| (READ(E1_ENABLE_PIN) == (E_ENABLE_ON))
#endif
|| (!READ(E0_ENABLE_PIN) ^ !(E_ENABLE_ON))) //If any of the drivers are enabled...
|| (READ(E0_ENABLE_PIN) == (E_ENABLE_ON))) //If any of the drivers are enabled...
{
lastMotor = millis(); //... set time to NOW so the fan will turn on
}