A specific option to SLIM_LCD_MENUS
This commit is contained in:
houseofbugs
Scott Lahteine
parent
7a8c132ee9
commit
a66811a597
@ -473,6 +473,9 @@
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
// Leave out seldom-used LCD menu items to recover some Program Memory
|
||||
//#define SLIM_LCD_MENUS
|
||||
|
||||
// Scroll a longer status message into view
|
||||
//#define STATUS_MESSAGE_SCROLLING
|
||||
|
||||
|
||||
@ -172,10 +172,13 @@ uint16_t max_display_update_time = 0;
|
||||
void lcd_move_menu();
|
||||
void lcd_control_menu();
|
||||
void lcd_control_temperature_menu();
|
||||
void lcd_control_temperature_preheat_material1_settings_menu();
|
||||
void lcd_control_temperature_preheat_material2_settings_menu();
|
||||
void lcd_control_motion_menu();
|
||||
|
||||
#if DISABLED(SLIM_LCD_MENUS)
|
||||
void lcd_control_temperature_preheat_material1_settings_menu();
|
||||
void lcd_control_temperature_preheat_material2_settings_menu();
|
||||
#endif
|
||||
|
||||
#if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
void lcd_control_filament_menu();
|
||||
#endif
|
||||
@ -2559,7 +2562,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
lcd_bed_leveling
|
||||
#endif
|
||||
);
|
||||
#elif PLANNER_LEVELING && DISABLED(PROBE_MANUALLY)
|
||||
#elif PLANNER_LEVELING && DISABLED(PROBE_MANUALLY) && DISABLED(SLIM_LCD_MENUS)
|
||||
MENU_ITEM(gcode, MSG_BED_LEVELING, PSTR("G28\nG29"));
|
||||
#endif
|
||||
|
||||
@ -2568,7 +2571,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
MENU_ITEM(function, MSG_LEVEL_CORNERS, _lcd_level_bed_corners);
|
||||
#endif
|
||||
|
||||
#if HAS_M206_COMMAND
|
||||
#if HAS_M206_COMMAND && DISABLED(SLIM_LCD_MENUS)
|
||||
//
|
||||
// Set Home Offsets
|
||||
//
|
||||
@ -3168,8 +3171,10 @@ void kill_screen(const char* lcd_msg) {
|
||||
MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
|
||||
MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings);
|
||||
#endif
|
||||
|
||||
MENU_ITEM(function, MSG_RESTORE_FAILSAFE, lcd_factory_settings);
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
|
||||
#if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS)
|
||||
MENU_ITEM(submenu, MSG_INIT_EEPROM, lcd_init_eeprom_confirm);
|
||||
#endif
|
||||
|
||||
@ -3381,64 +3386,228 @@ void kill_screen(const char* lcd_msg) {
|
||||
|
||||
#endif // PIDTEMP
|
||||
|
||||
//
|
||||
// Preheat Material 1 conf
|
||||
//
|
||||
MENU_ITEM(submenu, MSG_PREHEAT_1_SETTINGS, lcd_control_temperature_preheat_material1_settings_menu);
|
||||
#if DISABLED(SLIM_LCD_MENUS)
|
||||
//
|
||||
// Preheat Material 1 conf
|
||||
//
|
||||
MENU_ITEM(submenu, MSG_PREHEAT_1_SETTINGS, lcd_control_temperature_preheat_material1_settings_menu);
|
||||
|
||||
//
|
||||
// Preheat Material 2 conf
|
||||
//
|
||||
MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, lcd_control_temperature_preheat_material2_settings_menu);
|
||||
#endif
|
||||
|
||||
//
|
||||
// Preheat Material 2 conf
|
||||
//
|
||||
MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, lcd_control_temperature_preheat_material2_settings_menu);
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
void _lcd_control_temperature_preheat_settings_menu(uint8_t material) {
|
||||
#if HOTENDS > 4
|
||||
#define MINTEMP_ALL MIN5(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP)
|
||||
#define MAXTEMP_ALL MAX5(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP)
|
||||
#elif HOTENDS > 3
|
||||
#define MINTEMP_ALL MIN4(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP)
|
||||
#define MAXTEMP_ALL MAX4(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP)
|
||||
#elif HOTENDS > 2
|
||||
#define MINTEMP_ALL MIN3(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP)
|
||||
#define MAXTEMP_ALL MAX3(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP)
|
||||
#elif HOTENDS > 1
|
||||
#define MINTEMP_ALL min(HEATER_0_MINTEMP, HEATER_1_MINTEMP)
|
||||
#define MAXTEMP_ALL max(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP)
|
||||
#else
|
||||
#define MINTEMP_ALL HEATER_0_MINTEMP
|
||||
#define MAXTEMP_ALL HEATER_0_MAXTEMP
|
||||
#endif
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_TEMPERATURE);
|
||||
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255);
|
||||
#if TEMP_SENSOR_0 != 0
|
||||
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15);
|
||||
#endif
|
||||
#if TEMP_SENSOR_BED != 0
|
||||
MENU_ITEM_EDIT(int3, MSG_BED, &lcd_preheat_bed_temp[material], BED_MINTEMP, BED_MAXTEMP - 15);
|
||||
#endif
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
|
||||
#endif
|
||||
END_MENU();
|
||||
}
|
||||
#if DISABLED(SLIM_LCD_MENUS)
|
||||
|
||||
/**
|
||||
*
|
||||
* "Temperature" > "Preheat Material 1 conf" submenu
|
||||
*
|
||||
*/
|
||||
void lcd_control_temperature_preheat_material1_settings_menu() { _lcd_control_temperature_preheat_settings_menu(0); }
|
||||
void _lcd_control_temperature_preheat_settings_menu(const uint8_t material) {
|
||||
#if HOTENDS > 4
|
||||
#define MINTEMP_ALL MIN5(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP)
|
||||
#define MAXTEMP_ALL MAX5(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP)
|
||||
#elif HOTENDS > 3
|
||||
#define MINTEMP_ALL MIN4(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP)
|
||||
#define MAXTEMP_ALL MAX4(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP)
|
||||
#elif HOTENDS > 2
|
||||
#define MINTEMP_ALL MIN3(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP)
|
||||
#define MAXTEMP_ALL MAX3(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP)
|
||||
#elif HOTENDS > 1
|
||||
#define MINTEMP_ALL min(HEATER_0_MINTEMP, HEATER_1_MINTEMP)
|
||||
#define MAXTEMP_ALL max(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP)
|
||||
#else
|
||||
#define MINTEMP_ALL HEATER_0_MINTEMP
|
||||
#define MAXTEMP_ALL HEATER_0_MAXTEMP
|
||||
#endif
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_TEMPERATURE);
|
||||
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &lcd_preheat_fan_speed[material], 0, 255);
|
||||
#if TEMP_SENSOR_0 != 0
|
||||
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &lcd_preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15);
|
||||
#endif
|
||||
#if TEMP_SENSOR_BED != 0
|
||||
MENU_ITEM_EDIT(int3, MSG_BED, &lcd_preheat_bed_temp[material], BED_MINTEMP, BED_MAXTEMP - 15);
|
||||
#endif
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
|
||||
#endif
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
/**
|
||||
*
|
||||
* "Temperature" > "Preheat Material 2 conf" submenu
|
||||
*
|
||||
*/
|
||||
void lcd_control_temperature_preheat_material2_settings_menu() { _lcd_control_temperature_preheat_settings_menu(1); }
|
||||
/**
|
||||
*
|
||||
* "Temperature" > "Preheat Material 1 conf" submenu
|
||||
*
|
||||
*/
|
||||
void lcd_control_temperature_preheat_material1_settings_menu() { _lcd_control_temperature_preheat_settings_menu(0); }
|
||||
|
||||
/**
|
||||
*
|
||||
* "Temperature" > "Preheat Material 2 conf" submenu
|
||||
*
|
||||
*/
|
||||
void lcd_control_temperature_preheat_material2_settings_menu() { _lcd_control_temperature_preheat_settings_menu(1); }
|
||||
|
||||
void _reset_acceleration_rates() { planner.reset_acceleration_rates(); }
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
void _reset_e_acceleration_rate(const uint8_t e) { if (e == active_extruder) _reset_acceleration_rates(); }
|
||||
void _reset_e0_acceleration_rate() { _reset_e_acceleration_rate(0); }
|
||||
void _reset_e1_acceleration_rate() { _reset_e_acceleration_rate(1); }
|
||||
#if E_STEPPERS > 2
|
||||
void _reset_e2_acceleration_rate() { _reset_e_acceleration_rate(2); }
|
||||
#if E_STEPPERS > 3
|
||||
void _reset_e3_acceleration_rate() { _reset_e_acceleration_rate(3); }
|
||||
#if E_STEPPERS > 4
|
||||
void _reset_e4_acceleration_rate() { _reset_e_acceleration_rate(4); }
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#endif
|
||||
|
||||
void _planner_refresh_positioning() { planner.refresh_positioning(); }
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
void _planner_refresh_e_positioning(const uint8_t e) {
|
||||
if (e == active_extruder)
|
||||
_planner_refresh_positioning();
|
||||
else
|
||||
planner.steps_to_mm[E_AXIS + e] = 1.0 / planner.axis_steps_per_mm[E_AXIS + e];
|
||||
}
|
||||
void _planner_refresh_e0_positioning() { _planner_refresh_e_positioning(0); }
|
||||
void _planner_refresh_e1_positioning() { _planner_refresh_e_positioning(1); }
|
||||
#if E_STEPPERS > 2
|
||||
void _planner_refresh_e2_positioning() { _planner_refresh_e_positioning(2); }
|
||||
#if E_STEPPERS > 3
|
||||
void _planner_refresh_e3_positioning() { _planner_refresh_e_positioning(3); }
|
||||
#if E_STEPPERS > 4
|
||||
void _planner_refresh_e4_positioning() { _planner_refresh_e_positioning(4); }
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#endif
|
||||
|
||||
// M203 / M205 Velocity options
|
||||
void lcd_control_motion_velocity_menu() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_MOTION);
|
||||
|
||||
// M203 Max Feedrate
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_X, &planner.max_feedrate_mm_s[X_AXIS], 1, 999);
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Y, &planner.max_feedrate_mm_s[Y_AXIS], 1, 999);
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Z, &planner.max_feedrate_mm_s[Z_AXIS], 1, 999);
|
||||
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.max_feedrate_mm_s[E_AXIS + active_extruder], 1, 999);
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E1, &planner.max_feedrate_mm_s[E_AXIS], 1, 999);
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E2, &planner.max_feedrate_mm_s[E_AXIS + 1], 1, 999);
|
||||
#if E_STEPPERS > 2
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E3, &planner.max_feedrate_mm_s[E_AXIS + 2], 1, 999);
|
||||
#if E_STEPPERS > 3
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E4, &planner.max_feedrate_mm_s[E_AXIS + 3], 1, 999);
|
||||
#if E_STEPPERS > 4
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E5, &planner.max_feedrate_mm_s[E_AXIS + 4], 1, 999);
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#else
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.max_feedrate_mm_s[E_AXIS], 1, 999);
|
||||
#endif
|
||||
|
||||
// M205 S Min Feedrate
|
||||
MENU_ITEM_EDIT(float3, MSG_VMIN, &planner.min_feedrate_mm_s, 0, 999);
|
||||
|
||||
// M205 T Min Travel Feedrate
|
||||
MENU_ITEM_EDIT(float3, MSG_VTRAV_MIN, &planner.min_travel_feedrate_mm_s, 0, 999);
|
||||
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
// M201 / M204 Accelerations
|
||||
void lcd_control_motion_acceleration_menu() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_MOTION);
|
||||
|
||||
// M204 P Acceleration
|
||||
MENU_ITEM_EDIT(float5, MSG_ACC, &planner.acceleration, 10, 99000);
|
||||
|
||||
// M204 R Retract Acceleration
|
||||
MENU_ITEM_EDIT(float5, MSG_A_RETRACT, &planner.retract_acceleration, 100, 99000);
|
||||
|
||||
// M204 T Travel Acceleration
|
||||
MENU_ITEM_EDIT(float5, MSG_A_TRAVEL, &planner.travel_acceleration, 100, 99000);
|
||||
|
||||
// M201 settings
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_X, &planner.max_acceleration_mm_per_s2[X_AXIS], 100, 99000, _reset_acceleration_rates);
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Y, &planner.max_acceleration_mm_per_s2[Y_AXIS], 100, 99000, _reset_acceleration_rates);
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Z, &planner.max_acceleration_mm_per_s2[Z_AXIS], 10, 99000, _reset_acceleration_rates);
|
||||
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &planner.max_acceleration_mm_per_s2[E_AXIS + active_extruder], 100, 99000, _reset_acceleration_rates);
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E1, &planner.max_acceleration_mm_per_s2[E_AXIS], 100, 99000, _reset_e0_acceleration_rate);
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E2, &planner.max_acceleration_mm_per_s2[E_AXIS + 1], 100, 99000, _reset_e1_acceleration_rate);
|
||||
#if E_STEPPERS > 2
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E3, &planner.max_acceleration_mm_per_s2[E_AXIS + 2], 100, 99000, _reset_e2_acceleration_rate);
|
||||
#if E_STEPPERS > 3
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E4, &planner.max_acceleration_mm_per_s2[E_AXIS + 3], 100, 99000, _reset_e3_acceleration_rate);
|
||||
#if E_STEPPERS > 4
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E5, &planner.max_acceleration_mm_per_s2[E_AXIS + 4], 100, 99000, _reset_e4_acceleration_rate);
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#else
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &planner.max_acceleration_mm_per_s2[E_AXIS], 100, 99000, _reset_acceleration_rates);
|
||||
#endif
|
||||
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
// M205 Jerk
|
||||
void lcd_control_motion_jerk_menu() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_MOTION);
|
||||
|
||||
MENU_ITEM_EDIT(float3, MSG_VX_JERK, &planner.max_jerk[X_AXIS], 1, 990);
|
||||
MENU_ITEM_EDIT(float3, MSG_VY_JERK, &planner.max_jerk[Y_AXIS], 1, 990);
|
||||
#if ENABLED(DELTA)
|
||||
MENU_ITEM_EDIT(float3, MSG_VZ_JERK, &planner.max_jerk[Z_AXIS], 1, 990);
|
||||
#else
|
||||
MENU_ITEM_EDIT(float52, MSG_VZ_JERK, &planner.max_jerk[Z_AXIS], 0.1, 990);
|
||||
#endif
|
||||
MENU_ITEM_EDIT(float3, MSG_VE_JERK, &planner.max_jerk[E_AXIS], 1, 990);
|
||||
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
// M92 Steps-per-mm
|
||||
void lcd_control_motion_steps_per_mm_menu() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_MOTION);
|
||||
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_XSTEPS, &planner.axis_steps_per_mm[X_AXIS], 5, 9999, _planner_refresh_positioning);
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_YSTEPS, &planner.axis_steps_per_mm[Y_AXIS], 5, 9999, _planner_refresh_positioning);
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ZSTEPS, &planner.axis_steps_per_mm[Z_AXIS], 5, 9999, _planner_refresh_positioning);
|
||||
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.axis_steps_per_mm[E_AXIS + active_extruder], 5, 9999, _planner_refresh_positioning);
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E1STEPS, &planner.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_e0_positioning);
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E2STEPS, &planner.axis_steps_per_mm[E_AXIS + 1], 5, 9999, _planner_refresh_e1_positioning);
|
||||
#if E_STEPPERS > 2
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E3STEPS, &planner.axis_steps_per_mm[E_AXIS + 2], 5, 9999, _planner_refresh_e2_positioning);
|
||||
#if E_STEPPERS > 3
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E4STEPS, &planner.axis_steps_per_mm[E_AXIS + 3], 5, 9999, _planner_refresh_e3_positioning);
|
||||
#if E_STEPPERS > 4
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E5STEPS, &planner.axis_steps_per_mm[E_AXIS + 4], 5, 9999, _planner_refresh_e4_positioning);
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#else
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_positioning);
|
||||
#endif
|
||||
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
#endif // !SLIM_LCD_MENUS
|
||||
|
||||
/**
|
||||
*
|
||||
@ -3446,164 +3615,6 @@ void kill_screen(const char* lcd_msg) {
|
||||
*
|
||||
*/
|
||||
|
||||
void _reset_acceleration_rates() { planner.reset_acceleration_rates(); }
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
void _reset_e_acceleration_rate(const uint8_t e) { if (e == active_extruder) _reset_acceleration_rates(); }
|
||||
void _reset_e0_acceleration_rate() { _reset_e_acceleration_rate(0); }
|
||||
void _reset_e1_acceleration_rate() { _reset_e_acceleration_rate(1); }
|
||||
#if E_STEPPERS > 2
|
||||
void _reset_e2_acceleration_rate() { _reset_e_acceleration_rate(2); }
|
||||
#if E_STEPPERS > 3
|
||||
void _reset_e3_acceleration_rate() { _reset_e_acceleration_rate(3); }
|
||||
#if E_STEPPERS > 4
|
||||
void _reset_e4_acceleration_rate() { _reset_e_acceleration_rate(4); }
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#endif
|
||||
|
||||
void _planner_refresh_positioning() { planner.refresh_positioning(); }
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
void _planner_refresh_e_positioning(const uint8_t e) {
|
||||
if (e == active_extruder)
|
||||
_planner_refresh_positioning();
|
||||
else
|
||||
planner.steps_to_mm[E_AXIS + e] = 1.0 / planner.axis_steps_per_mm[E_AXIS + e];
|
||||
}
|
||||
void _planner_refresh_e0_positioning() { _planner_refresh_e_positioning(0); }
|
||||
void _planner_refresh_e1_positioning() { _planner_refresh_e_positioning(1); }
|
||||
#if E_STEPPERS > 2
|
||||
void _planner_refresh_e2_positioning() { _planner_refresh_e_positioning(2); }
|
||||
#if E_STEPPERS > 3
|
||||
void _planner_refresh_e3_positioning() { _planner_refresh_e_positioning(3); }
|
||||
#if E_STEPPERS > 4
|
||||
void _planner_refresh_e4_positioning() { _planner_refresh_e_positioning(4); }
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#endif
|
||||
|
||||
// M203 / M205 Velocity options
|
||||
void lcd_control_motion_velocity_menu() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_MOTION);
|
||||
|
||||
// M203 Max Feedrate
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_X, &planner.max_feedrate_mm_s[X_AXIS], 1, 999);
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Y, &planner.max_feedrate_mm_s[Y_AXIS], 1, 999);
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_Z, &planner.max_feedrate_mm_s[Z_AXIS], 1, 999);
|
||||
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.max_feedrate_mm_s[E_AXIS + active_extruder], 1, 999);
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E1, &planner.max_feedrate_mm_s[E_AXIS], 1, 999);
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E2, &planner.max_feedrate_mm_s[E_AXIS + 1], 1, 999);
|
||||
#if E_STEPPERS > 2
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E3, &planner.max_feedrate_mm_s[E_AXIS + 2], 1, 999);
|
||||
#if E_STEPPERS > 3
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E4, &planner.max_feedrate_mm_s[E_AXIS + 3], 1, 999);
|
||||
#if E_STEPPERS > 4
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E5, &planner.max_feedrate_mm_s[E_AXIS + 4], 1, 999);
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#else
|
||||
MENU_ITEM_EDIT(float3, MSG_VMAX MSG_E, &planner.max_feedrate_mm_s[E_AXIS], 1, 999);
|
||||
#endif
|
||||
|
||||
// M205 S Min Feedrate
|
||||
MENU_ITEM_EDIT(float3, MSG_VMIN, &planner.min_feedrate_mm_s, 0, 999);
|
||||
|
||||
// M205 T Min Travel Feedrate
|
||||
MENU_ITEM_EDIT(float3, MSG_VTRAV_MIN, &planner.min_travel_feedrate_mm_s, 0, 999);
|
||||
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
// M201 / M204 Accelerations
|
||||
void lcd_control_motion_acceleration_menu() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_MOTION);
|
||||
|
||||
// M204 P Acceleration
|
||||
MENU_ITEM_EDIT(float5, MSG_ACC, &planner.acceleration, 10, 99000);
|
||||
|
||||
// M204 R Retract Acceleration
|
||||
MENU_ITEM_EDIT(float5, MSG_A_RETRACT, &planner.retract_acceleration, 100, 99000);
|
||||
|
||||
// M204 T Travel Acceleration
|
||||
MENU_ITEM_EDIT(float5, MSG_A_TRAVEL, &planner.travel_acceleration, 100, 99000);
|
||||
|
||||
// M201 settings
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_X, &planner.max_acceleration_mm_per_s2[X_AXIS], 100, 99000, _reset_acceleration_rates);
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Y, &planner.max_acceleration_mm_per_s2[Y_AXIS], 100, 99000, _reset_acceleration_rates);
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_Z, &planner.max_acceleration_mm_per_s2[Z_AXIS], 10, 99000, _reset_acceleration_rates);
|
||||
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &planner.max_acceleration_mm_per_s2[E_AXIS + active_extruder], 100, 99000, _reset_acceleration_rates);
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E1, &planner.max_acceleration_mm_per_s2[E_AXIS], 100, 99000, _reset_e0_acceleration_rate);
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E2, &planner.max_acceleration_mm_per_s2[E_AXIS + 1], 100, 99000, _reset_e1_acceleration_rate);
|
||||
#if E_STEPPERS > 2
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E3, &planner.max_acceleration_mm_per_s2[E_AXIS + 2], 100, 99000, _reset_e2_acceleration_rate);
|
||||
#if E_STEPPERS > 3
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E4, &planner.max_acceleration_mm_per_s2[E_AXIS + 3], 100, 99000, _reset_e3_acceleration_rate);
|
||||
#if E_STEPPERS > 4
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E5, &planner.max_acceleration_mm_per_s2[E_AXIS + 4], 100, 99000, _reset_e4_acceleration_rate);
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#else
|
||||
MENU_ITEM_EDIT_CALLBACK(long5, MSG_AMAX MSG_E, &planner.max_acceleration_mm_per_s2[E_AXIS], 100, 99000, _reset_acceleration_rates);
|
||||
#endif
|
||||
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
// M205 Jerk
|
||||
void lcd_control_motion_jerk_menu() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_MOTION);
|
||||
|
||||
MENU_ITEM_EDIT(float3, MSG_VX_JERK, &planner.max_jerk[X_AXIS], 1, 990);
|
||||
MENU_ITEM_EDIT(float3, MSG_VY_JERK, &planner.max_jerk[Y_AXIS], 1, 990);
|
||||
#if ENABLED(DELTA)
|
||||
MENU_ITEM_EDIT(float3, MSG_VZ_JERK, &planner.max_jerk[Z_AXIS], 1, 990);
|
||||
#else
|
||||
MENU_ITEM_EDIT(float52, MSG_VZ_JERK, &planner.max_jerk[Z_AXIS], 0.1, 990);
|
||||
#endif
|
||||
MENU_ITEM_EDIT(float3, MSG_VE_JERK, &planner.max_jerk[E_AXIS], 1, 990);
|
||||
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
// M92 Steps-per-mm
|
||||
void lcd_control_motion_steps_per_mm_menu() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_MOTION);
|
||||
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_XSTEPS, &planner.axis_steps_per_mm[X_AXIS], 5, 9999, _planner_refresh_positioning);
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_YSTEPS, &planner.axis_steps_per_mm[Y_AXIS], 5, 9999, _planner_refresh_positioning);
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ZSTEPS, &planner.axis_steps_per_mm[Z_AXIS], 5, 9999, _planner_refresh_positioning);
|
||||
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.axis_steps_per_mm[E_AXIS + active_extruder], 5, 9999, _planner_refresh_positioning);
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E1STEPS, &planner.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_e0_positioning);
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E2STEPS, &planner.axis_steps_per_mm[E_AXIS + 1], 5, 9999, _planner_refresh_e1_positioning);
|
||||
#if E_STEPPERS > 2
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E3STEPS, &planner.axis_steps_per_mm[E_AXIS + 2], 5, 9999, _planner_refresh_e2_positioning);
|
||||
#if E_STEPPERS > 3
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E4STEPS, &planner.axis_steps_per_mm[E_AXIS + 3], 5, 9999, _planner_refresh_e3_positioning);
|
||||
#if E_STEPPERS > 4
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E5STEPS, &planner.axis_steps_per_mm[E_AXIS + 4], 5, 9999, _planner_refresh_e4_positioning);
|
||||
#endif // E_STEPPERS > 4
|
||||
#endif // E_STEPPERS > 3
|
||||
#endif // E_STEPPERS > 2
|
||||
#else
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_positioning);
|
||||
#endif
|
||||
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
void lcd_control_motion_menu() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_CONTROL);
|
||||
@ -3614,17 +3625,21 @@ void kill_screen(const char* lcd_msg) {
|
||||
MENU_ITEM_EDIT(float32, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
|
||||
#endif
|
||||
|
||||
// M203 / M205 - Feedrate items
|
||||
MENU_ITEM(submenu, MSG_VELOCITY, lcd_control_motion_velocity_menu);
|
||||
#if DISABLED(SLIM_LCD_MENUS)
|
||||
|
||||
// M201 - Acceleration items
|
||||
MENU_ITEM(submenu, MSG_ACCELERATION, lcd_control_motion_acceleration_menu);
|
||||
// M203 / M205 - Feedrate items
|
||||
MENU_ITEM(submenu, MSG_VELOCITY, lcd_control_motion_velocity_menu);
|
||||
|
||||
// M205 - Max Jerk
|
||||
MENU_ITEM(submenu, MSG_JERK, lcd_control_motion_jerk_menu);
|
||||
// M201 - Acceleration items
|
||||
MENU_ITEM(submenu, MSG_ACCELERATION, lcd_control_motion_acceleration_menu);
|
||||
|
||||
// M92 - Steps Per mm
|
||||
MENU_ITEM(submenu, MSG_STEPS_PER_MM, lcd_control_motion_steps_per_mm_menu);
|
||||
// M205 - Max Jerk
|
||||
MENU_ITEM(submenu, MSG_JERK, lcd_control_motion_jerk_menu);
|
||||
|
||||
// M92 - Steps Per mm
|
||||
MENU_ITEM(submenu, MSG_STEPS_PER_MM, lcd_control_motion_steps_per_mm_menu);
|
||||
|
||||
#endif // !SLIM_LCD_MENUS
|
||||
|
||||
// M540 S - Abort on endstop hit when SD printing
|
||||
#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user