From b1539394fd47b0538ae1e7f3bd96313e4b433e0e Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 13 Dec 2016 23:22:07 -0800 Subject: [PATCH] Use planner.unapply_leveling to undo tilt in G29 --- Marlin/Marlin_main.cpp | 35 ++++++++++++----------------------- 1 file changed, 12 insertions(+), 23 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index f7a2522e3..68123ee23 100755 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -4332,45 +4332,34 @@ inline void gcode_G28() { // Correct the current XYZ position based on the tilted plane. // - // 1. Get the distance from the current position to the reference point. - float x_dist = RAW_CURRENT_POSITION(X_AXIS) - X_TILT_FULCRUM, - y_dist = RAW_CURRENT_POSITION(Y_AXIS) - Y_TILT_FULCRUM, - z_real = current_position[Z_AXIS], - z_zero = 0; - #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) DEBUG_POS("G29 uncorrected XYZ", current_position); #endif - matrix_3x3 inverse = matrix_3x3::transpose(planner.bed_level_matrix); + float converted[XYZ]; + memcpy(converted, current_position, sizeof(converted)); - // 2. Apply the inverse matrix to the distance - // from the reference point to X, Y, and zero. - apply_rotation_xyz(inverse, x_dist, y_dist, z_zero); + planner.abl_enabled = true; + planner.unapply_leveling(converted); // use conversion machinery + planner.abl_enabled = false; - // 3. Get the matrix-based corrected Z. - // (Even if not used, get it for comparison.) - float new_z = z_real + z_zero; - - // 4. Use the last measured distance to the bed, if possible + // Use the last measured distance to the bed, if possible if ( NEAR(current_position[X_AXIS], xProbe - (X_PROBE_OFFSET_FROM_EXTRUDER)) && NEAR(current_position[Y_AXIS], yProbe - (Y_PROBE_OFFSET_FROM_EXTRUDER)) ) { - float simple_z = z_real - (measured_z - (-zprobe_zoffset)); + float simple_z = current_position[Z_AXIS] - (measured_z - (-zprobe_zoffset)); #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { SERIAL_ECHOPAIR("Z from Probe:", simple_z); - SERIAL_ECHOPAIR(" Matrix:", new_z); - SERIAL_ECHOLNPAIR(" Discrepancy:", simple_z - new_z); + SERIAL_ECHOPAIR(" Matrix:", converted[Z_AXIS]); + SERIAL_ECHOLNPAIR(" Discrepancy:", simple_z - converted[Z_AXIS]); } #endif - new_z = simple_z; + converted[Z_AXIS] = simple_z; } - // 5. The rotated XY and corrected Z are now current_position - current_position[X_AXIS] = LOGICAL_X_POSITION(x_dist) + X_TILT_FULCRUM; - current_position[Y_AXIS] = LOGICAL_Y_POSITION(y_dist) + Y_TILT_FULCRUM; - current_position[Z_AXIS] = new_z; + // The rotated XY and corrected Z are now current_position + memcpy(current_position, converted, sizeof(converted)); #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) DEBUG_POS("G29 corrected XYZ", current_position);